librecmc/librecmc.git
7 years agoinclude/package.mk: sync default value for hash fallback with mirror hash
Felix Fietkau [Fri, 16 Dec 2016 14:29:36 +0000 (15:29 +0100)]
include/package.mk: sync default value for hash fallback with mirror hash

Simplifies dealing with PKG_HASH vs PKG_MD5SUM

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobuild: remove duplicate Download/default definition from include/host-build.mk
Felix Fietkau [Fri, 16 Dec 2016 14:26:22 +0000 (15:26 +0100)]
build: remove duplicate Download/default definition from include/host-build.mk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agodownload.pl: check for existing file before the first download attempt
Felix Fietkau [Fri, 16 Dec 2016 14:15:48 +0000 (15:15 +0100)]
download.pl: check for existing file before the first download attempt

In the build system, flock will prevent multiple concurrent downloads
for the same file. However, if one download request for the same file is
waiting for another one to finish, it will result in downloading the
same file twice consecutively.

Prevent this issue by exiting immediately if the file has already been
downloaded

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k-firmware: fix typo
Felix Fietkau [Fri, 16 Dec 2016 14:08:57 +0000 (15:08 +0100)]
ath10k-firmware: fix typo

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agopackage/kernel/linux: only access kernel config if DUMP is unset
Felix Fietkau [Wed, 14 Dec 2016 14:35:16 +0000 (15:35 +0100)]
package/kernel/linux: only access kernel config if DUMP is unset

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k-firmware: untangle CT firmware filenames, fix conflicts
Felix Fietkau [Fri, 16 Dec 2016 13:36:53 +0000 (14:36 +0100)]
ath10k-firmware: untangle CT firmware filenames, fix conflicts

CT firmware files use the same filename with a different URL for
different chips. Since all files end up in dl/, filenames need to be
unique as well.
Add a chip prefix to the output filename to fix this issue.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobuild: replace MD5SUM variables with HASH
Felix Fietkau [Wed, 14 Dec 2016 16:11:03 +0000 (17:11 +0100)]
build: replace MD5SUM variables with HASH

Since we've switched to preferring SHA256 over MD5, the old variable
name is misleading. Packages using the old name remain compatible.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: add support for TP-LINK TL-WR940N v4
David Lutz [Mon, 12 Dec 2016 14:59:03 +0000 (15:59 +0100)]
ar71xx: add support for TP-LINK TL-WR940N v4

Signed-off-by: David Lutz <kpanic@hirnduenger.de>
7 years agodnsmasq: fix service reload
John Crispin [Fri, 16 Dec 2016 09:34:52 +0000 (10:34 +0100)]
dnsmasq: fix service reload

The SIGHUP also got sent to the reload script making it bail out
with an error

Revert "dnsmasq: reload config if host name is modified"
This reverts commit 854459a2f923376e0e509ebc0fb8ff90e9f13c02.

Reported-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
7 years agorealview: drop the target
Yousong Zhou [Thu, 8 Dec 2016 15:21:31 +0000 (23:21 +0800)]
realview: drop the target

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
7 years agoarmvirt: new target
Yousong Zhou [Thu, 8 Dec 2016 15:21:30 +0000 (23:21 +0800)]
armvirt: new target

An ARM Cortex-A15 machine provided by QEMU.

Kernel drivers enabled:

 - pl011, uart
 - pl031, rtc
 - pl061, gpio
 - pci-host-generic
 - virtio_{mmio,pci,net,blk,scsi,9p,console,balloon}
 - smp with NR_CPUS=4
 - cpu-hotplug
 - ext4
 - neon, vfp extensions support (otherwise userland will fail with
   illegal instruction signal (code 0x00000004))
 - DEBUG_BUGVERBOSE for debug purposes

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
7 years agomt76: update to the latest version, fixes a build error on some platforms
Felix Fietkau [Thu, 15 Dec 2016 12:02:31 +0000 (13:02 +0100)]
mt76: update to the latest version, fixes a build error on some platforms

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agox86: revert default root size back to 256 MB
Felix Fietkau [Thu, 15 Dec 2016 10:43:34 +0000 (11:43 +0100)]
x86: revert default root size back to 256 MB

2 GB is overkill and was only added to allow unlimited ext4 resizing,
which is a pretty rare use case. 256 MB allows resizing up to 256 GB,
which should be good enough for almost all users.

A lot of this is mostly irrelevant anyway, since you can just use
squashfs + ext4 overlay.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoodhcpd: update sha256sum
Hauke Mehrtens [Wed, 14 Dec 2016 20:43:58 +0000 (21:43 +0100)]
odhcpd: update sha256sum

The sha256sum was not updated in the last commit.

Fixes: a7c231027 [odhcpd: Fix dnsmasq re-reading hostfile]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobase-files: fix CONFIG_VERSION_DIST default
Jo-Philipp Wich [Wed, 14 Dec 2016 18:54:51 +0000 (19:54 +0100)]
base-files: fix CONFIG_VERSION_DIST default

Fix the default value of CONFIG_VERSION_DIST to use uppercase "LEDE".

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agobuild: use SNAPSHOT instead of CURRENT to designate untagged branch builds
Jo-Philipp Wich [Fri, 2 Dec 2016 21:11:40 +0000 (22:11 +0100)]
build: use SNAPSHOT instead of CURRENT to designate untagged branch builds

Calling a build ##.##-CURRENT might mislead users into thinking that this
build is the most current release of a branch.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoar71xx: fix TL-WR842N v2 switch port order
Jo-Philipp Wich [Tue, 6 Dec 2016 17:20:07 +0000 (18:20 +0100)]
ar71xx: fix TL-WR842N v2 switch port order

The TL-WR842N v2 has the following switch port layout with swconfig port 0
being connected to eth1:

            Power  LAN4    LAN3    LAN2    LAN1    WAN     USB
             (*) | [...] | [...] | [...] | [...] | [...] | [.]
    swconfig port:   1       4       3       2      n/a
    netdev:        eth1    eth1    eth1    eth1    eth0

Adjust the board defaults to match this model specific layout.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoar71xx: Added missing support for Linksys E2100L
Gad Krumholz [Sun, 27 Nov 2016 06:52:53 +0000 (00:52 -0600)]
ar71xx: Added missing support for Linksys E2100L

It's based on the WRT160NL according to
https://wiki.openwrt.org/toh/linksys/e2100l

Based on research done here: https://forum.openwrt.org/viewtopic.php?id=24244
and here: https://forum.openwrt.org/viewtopic.php?pid=120791#p120791 this patch
was conceived.

Signed-off-by: Gad Krumholz <gad.krumholz@gmail.com>
[Jo-Philipp Wich: fix ordering, move addpattern change into separate commit]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agofirmware-utils: add E2100L support to addpattern.c
Jo-Philipp Wich [Fri, 2 Dec 2016 10:39:42 +0000 (11:39 +0100)]
firmware-utils: add E2100L support to addpattern.c

Based on OpenWrt PR#250

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agolinux: do not autoload sdhci.ko as sdhci-pltfm.ko already depends on it
Jo-Philipp Wich [Tue, 6 Dec 2016 16:09:34 +0000 (17:09 +0100)]
linux: do not autoload sdhci.ko as sdhci-pltfm.ko already depends on it

Currently, installing kmod-sdhci fails with "sdhci is already loaded" since
"sdhci.ko" is inserted explicitely first, the implicitely loaded again when
"sdhci-pltfm.ko" is inserted as the latter depends on the former.

Remove the explicit autoprobe of "sdhci.ko" to fix the postinstall script.

Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agobrcm63xx: image: trim revision code used for --rsa-signature
Jo-Philipp Wich [Wed, 14 Dec 2016 16:10:52 +0000 (17:10 +0100)]
brcm63xx: image: trim revision code used for --rsa-signature

The imagetag RSA signature field may not exceed 20 characters, so trim the
Git hash portion from the REVISION variable in order to ensure that the
resulting string fits within this field.

The current revision values may be longer than 20 chars, especially when
building within a dirty tree. In this case, the revision will look like
"r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long.

Fixes the following error spotted by the buildbots:

    Error: RSA Signature (rsa_signature,r) too long.
    make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoipkg-make-index.sh: drop a few non-essential fields
Felix Fietkau [Tue, 13 Dec 2016 14:20:03 +0000 (15:20 +0100)]
ipkg-make-index.sh: drop a few non-essential fields

Saves some more space on the package index

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoipkg-make-index.sh: drop md5sum from package index
Felix Fietkau [Tue, 13 Dec 2016 14:08:54 +0000 (15:08 +0100)]
ipkg-make-index.sh: drop md5sum from package index

We have switched opkg to sha256 a long time ago, and shrinking package
lists is useful for systems that are running low on RAM

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: netfilter: split out iptable_raw into a separate package
Felix Fietkau [Tue, 13 Dec 2016 13:54:55 +0000 (14:54 +0100)]
kernel: netfilter: split out iptable_raw into a separate package

This will avoid loading it in the default configuration, which reduces
image size a bit, and (more importantly) improves performance by
avoiding some unnecessary netfilter hooks

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agogcc: rip out transactional memory related bloat from crtbegin
Felix Fietkau [Tue, 13 Dec 2016 13:20:49 +0000 (14:20 +0100)]
gcc: rip out transactional memory related bloat from crtbegin

Slightly improves compression for each executable, saving about 4k from
the default ar71xx rootfs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoswconfig: replace the shared library with a static one
Felix Fietkau [Tue, 13 Dec 2016 12:15:05 +0000 (13:15 +0100)]
swconfig: replace the shared library with a static one

Reduces binary size

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoppp: use --gc-sections to save a tiny bit of space
Felix Fietkau [Tue, 13 Dec 2016 12:09:58 +0000 (13:09 +0100)]
ppp: use --gc-sections to save a tiny bit of space

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agolibs/libpcap: update to 1.8.1
p-wassi [Sat, 10 Dec 2016 09:56:22 +0000 (10:56 +0100)]
libs/libpcap: update to 1.8.1

Update libpcap to upstream release 1.8.1
Change the name from libpcap.so.1.3 to libpcap.so.1
Remove parts of patch 201 which moved code among src files.
Import patch 204 from Debian to update the USB path.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix parallel build bug]
7 years agoath10k: fix a soft-lockup on firmware restart
Felix Fietkau [Tue, 13 Dec 2016 11:52:16 +0000 (12:52 +0100)]
ath10k: fix a soft-lockup on firmware restart

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k: fix a bug on sending null-func frames
Felix Fietkau [Tue, 13 Dec 2016 11:52:01 +0000 (12:52 +0100)]
ath10k: fix a bug on sending null-func frames

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath10k-firmware: removed broken submenu
Alberto Bursi [Sat, 10 Dec 2016 16:02:58 +0000 (17:02 +0100)]
ath10k-firmware: removed broken submenu

this package references an undefined variable for its submenu.
Remove this NOP variable assignment.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
7 years agokernel: add a missing submenu
Alberto Bursi [Sun, 11 Dec 2016 18:51:04 +0000 (19:51 +0100)]
kernel: add a missing submenu

this kernel module currently does not set submenu.
Fix this by adding it to the "Others" submenu

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
7 years agocomgt-ncm: Add support for specifying profile index
Matti Laakso [Sun, 11 Dec 2016 15:28:52 +0000 (17:28 +0200)]
comgt-ncm: Add support for specifying profile index

Add support for specifying a call profile index instead of APN. A
specific index different from 1 must be used for some service
provider and modem combinations.

In addition, change the manufacturer detection to use the standard
AT+CGMI command, which produces more predictable output than ATI,
remove the redundant ipv6 option, since it is less ambiguous to
directly specify the PDP context type with mobile connections, and
fix missing device during teardown when using ncm through the wwan
proto.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
7 years agouqmi: Add support for specifying profile index
Matti Laakso [Sun, 11 Dec 2016 15:23:38 +0000 (17:23 +0200)]
uqmi: Add support for specifying profile index

Update uqmi to latest version, which brings about support for
specifying a call profile index instead of APN. A specific index
different from 1 must be used for some service provider and modem
combinations.

Also change option dhcp to dhcpv6, since IPv4 now always uses DHCP,
replace option ipv6 with pdptype, which is less ambiguous, and
make autoconnect optional and default it to off for IPv6 due to it
not working with statically configured IPv6.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
7 years agodropbear: clean up default PATH handling in makefile
Dario Ernst [Tue, 29 Nov 2016 15:02:48 +0000 (16:02 +0100)]
dropbear: clean up default PATH handling in makefile

Harmonise handling of DEFAULT_PATH by removing the patch introducing #ifndef
guards around the path, and only using one means to set the path in the
makefile.

Signed-off-by: Dario Ernst <Dario.Ernst@riverbed.com>
7 years agoramips: adding DWM-158 3g Modem
Giuseppe Lippolis [Fri, 9 Dec 2016 18:25:00 +0000 (19:25 +0100)]
ramips: adding DWM-158 3g Modem

This patch add the 3G modem DWM-158 to the usb-serial option driver.
The DWM-158 is a pcie 3G modem. It is embedded in the DWR-512 modem
supportet by lede. The patch has been submitted and merged in the upstream
linux-next repository.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
7 years agoar71xx: Add support for Netgear WNR2000v1
Huan Truong [Mon, 12 Dec 2016 21:25:01 +0000 (15:25 -0600)]
ar71xx: Add support for Netgear WNR2000v1

This patch adds supports for the WNR2000v1 board with 4MB flash, and
produces device-specific factory, rootfs, and sysupgrade files for the
WNR2000v1. This board is errorneously claimed as supported on the OpenWRT
wiki as AP81, but AP81 image would not work because of APT81 image
requiring having 8MB of flash, while WNR2000v1 has only 4MB.

The image requires the u-boot bootloader to be modified to fuhry's
bootloader first.

Short specification:

- CPU: Atheros AR9132
- 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps
- 4 MB of Flash
- 32 MB of RAM
- UART header (J1) on board
- 1x button

Factory/Initial flash instructions:

- Set up a TFTP server on your local machine.
- Download the uImage for ar71xx-generic and the rootfs image for
  ar71xx-generic-wnr2000 and save in the tftp server root.
- Gain serial access to the router via the UART port (telnetenable over
  the network only won't work!).
- Upgrade the u-boot bootloader to fuhry's version by running the
  script: http://fuhry.com/b/wnr2000/install-repart.sh
- When the router restarts, interrupt u-boot and gain access to u-boot command line.
- Repartititon the board and flash initial uImage and rootfs as follow.

Commands to type in u-boot:

# tells u-boot that we have a tftp server on 192.168.1.10
setenv serverip 192.168.1.10

# tells u-boot that the router should take the address 192.168.1.1
setenv ipaddr 192.168.1.1

# erase the region from 0x050000-0x3f0000
erase 0xbf050000 +0x3A0000

# loads sqfs.bin on TFTP server, and put it to memory address 0x81000000
tftpboot 0x81000000 sqfs.bin
# it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ
# copy bit by bit 0xZZZZZZ bytes from offset 0x050000
cp.b 0x81000000 0xbf050000 0xZZZZZZ

# same to the uImage.bin, write it right next to sqfs.bin
# again, 0xYYYYYY is the length that tftpboot reports
tftpboot 0x81000000 uImage.bin
cp.b 0x81000000 0xbf2a0000 0xYYYYYY

# We need to tell the kernel what board it is booting into, and where to find the partitions
setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd"

# Tell u-boot where to find the uImage
setenv bootcmd "bootm 0xbf2a0000"

# Tell u-boot to save parameters to the u-boot-env partitions
saveenv

# Reset the board
reset

Tested on:

- WNR2000v1 board.
- Initial flash works.

Known bugs:

- I don't know why factory image doesn't work on initial flash on stock
  firmware in u-boot recovery mode while it should.
- Sysupgrade does not yet work, if you do -f it will mess up your
  installation (requiring a reinstall of sqfs and uImage).

Signed-off-by: Huan Truong <htruong@tnhh.net>
7 years agoar71xx: Add ath10k-firmware-qca988x for DomyWifi DW33D
Jing Lin [Mon, 12 Dec 2016 07:10:22 +0000 (15:10 +0800)]
ar71xx: Add ath10k-firmware-qca988x for DomyWifi DW33D

The default package selection was missing the correct FW for ath10k to
work.

Signed-off-by: Jing Lin <mumuqz@163.com>
7 years agoprocd: add support for service signals
Jo-Philipp Wich [Tue, 13 Dec 2016 17:02:56 +0000 (18:02 +0100)]
procd: add support for service signals

Update procd to latest HEAD in order to introduce support for services signals:

- Adds a new service.signal ubus call to send a kill() signal to one or all
  running instances of a given service

- Adds a new "reload_signal" property which allows service init scripts to
  request procd to send a specific kill() signal on reload, instead of
  stopping and restarting running processes

Also fixes some potential memory leaks reported by cppcheck and an environment
variable corruption in the trace command.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agonetfilter: drop proprietary xt_id match
Jo-Philipp Wich [Tue, 13 Dec 2016 23:36:28 +0000 (00:36 +0100)]
netfilter: drop proprietary xt_id match

The xt_id match was used by the firewall3 package to track its own rules but
the approach has been changed to use xt_comment instead now, so we can drop
this nonstandard extension.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agofirewall3: drop support for automatic NOTRACK rules
Jo-Philipp Wich [Tue, 13 Dec 2016 23:44:22 +0000 (00:44 +0100)]
firewall3: drop support for automatic NOTRACK rules

Update to current HEAD in order to drop automatic generation of per-zone
NOTRACK rules.

The NOTRACK rules used to provide a little performance improvement but the
later introduction of the netfilter conntrack cache made those rules largely
unnecessary. Additionally, those rules caused various issues which broke
stateful firewalling in some scenarios.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agokernel: kmod-hwmon-tmp102: add dependency to kmod-thermal
Hauke Mehrtens [Tue, 13 Dec 2016 23:15:33 +0000 (00:15 +0100)]
kernel: kmod-hwmon-tmp102: add dependency to kmod-thermal

Depend on the kmod-thermal package when it is activated, this fixes
compile problems on some targets.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agoodhcpd: Fix dnsmasq re-reading hostfile
Hans Dedecker [Thu, 17 Nov 2016 12:34:34 +0000 (13:34 +0100)]
odhcpd: Fix dnsmasq re-reading hostfile

Depending on the dhcp uci config pidof dnsmasq can return
multiple pids. Fix re-reading of the hostfile by dnsmasq in
such case by sending SIGHUP signal to each of the returned
pids.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agodnsmasq: Specify directory /tmp/hosts as argument for --addn-hosts
Hans Dedecker [Tue, 13 Dec 2016 13:18:31 +0000 (14:18 +0100)]
dnsmasq: Specify directory /tmp/hosts as argument for --addn-hosts

Let dnsmasq read all hosts files in /tmp/hosts directory by specifying
/tmp/hosts as argument of --addn-host

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoath10k: fix DMA allocation issues
Felix Fietkau [Tue, 13 Dec 2016 11:44:52 +0000 (12:44 +0100)]
ath10k: fix DMA allocation issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agomac80211: refresh all patches
Felix Fietkau [Tue, 13 Dec 2016 11:33:42 +0000 (12:33 +0100)]
mac80211: refresh all patches

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath9k: add a RCU related bugfix
Felix Fietkau [Tue, 13 Dec 2016 11:32:13 +0000 (12:32 +0100)]
ath9k: add a RCU related bugfix

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agodownload.mk: improve download tarball reproducibility
Felix Fietkau [Mon, 12 Dec 2016 12:12:43 +0000 (13:12 +0100)]
download.mk: improve download tarball reproducibility

Store only numeric user/group id. Group 0 is 'root' on linux and 'wheel' on
BSD and Mac OS X.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agodownload.mk: remove code duplication in $(TAR) call
Felix Fietkau [Mon, 12 Dec 2016 10:42:14 +0000 (11:42 +0100)]
download.mk: remove code duplication in $(TAR) call

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agodownload.mk: use $(error) instead of a regular shell error
Felix Fietkau [Mon, 12 Dec 2016 10:37:23 +0000 (11:37 +0100)]
download.mk: use $(error) instead of a regular shell error

Useful for further rework

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: backport ubifs support for dirty_writeback_interval
Rafał Miłecki [Tue, 13 Dec 2016 08:39:33 +0000 (09:39 +0100)]
kernel: backport ubifs support for dirty_writeback_interval

These patches were queued for 4.10. For possible use cases see added:
[PATCH] ubifs: Use dirty_writeback_interval value for wbuf timer

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agobcm53xx: backport missed BCM53573 ILP patch from 4.10
Rafał Miłecki [Tue, 13 Dec 2016 08:13:40 +0000 (09:13 +0100)]
bcm53xx: backport missed BCM53573 ILP patch from 4.10

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agokernel: bump to 4.4.38
Kevin Darbyshire-Bryant [Sun, 11 Dec 2016 08:41:34 +0000 (08:41 +0000)]
kernel: bump to 4.4.38

Bump & refresh patches for all 4.4 supported targets.

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agobcm53xx: backport DTS patches accepted for 4.11
Rafał Miłecki [Tue, 13 Dec 2016 06:37:40 +0000 (07:37 +0100)]
bcm53xx: backport DTS patches accepted for 4.11

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoiproute2: support latest cake & restore DSCP washing
Kevin Darbyshire-Bryant [Wed, 12 Oct 2016 09:40:05 +0000 (10:40 +0100)]
iproute2: support latest cake & restore DSCP washing

Support new packet overhead passing paradigm in cake qdisc, also restore
DSCP wash/nowash keywords.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agokmod-sched-cake: update & restore DSCP washing
Kevin Darbyshire-Bryant [Fri, 28 Oct 2016 14:43:53 +0000 (15:43 +0100)]
kmod-sched-cake: update & restore DSCP washing

Track upstream changes, incl changes in packet overhead accounting
(automatically taking care of linux' packet sizing knowledge),
improvements to triple isolated DRR handling (new flow dominance),
statistics tweak & allow more packet drops in stressed conditions.

Under tests this has significantly improved latency control under
'many flows to one' scenarious as is typical of bittorrent and MS
Windows update.

I also restored 'DSCP washing' functionality in my repo which follows
upstream closely (like a hawk!) with tc keywords 'wash/nowash'.  This
allows cake to limit/control packets in bands determined by a packet's
DSCP but to clear those DSCP bits on qdisc egress.  This functionality
was originally removed as part of an attempt to push cake into the
kernel, which hasn't actually happened as yet.

A matching commit is required to iproute2/tc to support the new overhead
handling, keyword changes as well as the 'wash/nowash' tweak.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agofirmware-utils: tplink-safeloader: update support lists for CPE210/510/...
Matthias Schiffer [Sun, 11 Dec 2016 17:00:13 +0000 (18:00 +0100)]
firmware-utils: tplink-safeloader: update support lists for CPE210/510/...

Adds support for new EU and US variants; removes a few strings that were
never actually used and have been removed from the stock firmwares.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
7 years agoar71xx: simplify model detection for TP-Link Pharos devices
Matthias Schiffer [Sun, 11 Dec 2016 16:54:49 +0000 (17:54 +0100)]
ar71xx: simplify model detection for TP-Link Pharos devices

This also makes the detection more flexible, as it doesn't need to check
for each model explicitly.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
7 years agomt76: update to the latest version, fixes dfs issues
Felix Fietkau [Mon, 12 Dec 2016 09:54:47 +0000 (10:54 +0100)]
mt76: update to the latest version, fixes dfs issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agotcpdump: reduce size of -mini by removing more infrequently used protocols
Felix Fietkau [Sat, 10 Dec 2016 13:02:15 +0000 (14:02 +0100)]
tcpdump: reduce size of -mini by removing more infrequently used protocols

This removes:
- BGP
- CDP
- SCTP

MIPS binary .ipk size is reduced from ~150k to ~130k

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agonet/utils/tcpdump: update to 4.8.1
p-wassi [Sat, 10 Dec 2016 10:10:03 +0000 (11:10 +0100)]
net/utils/tcpdump: update to 4.8.1

Update tcpdump to upstream release 4.8.1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 years agombedtls: tune config to reduce size and improve performance
Felix Fietkau [Sat, 10 Dec 2016 11:27:23 +0000 (12:27 +0100)]
mbedtls: tune config to reduce size and improve performance

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agombedtls: sync with polarssl config
Felix Fietkau [Sat, 10 Dec 2016 10:22:58 +0000 (11:22 +0100)]
mbedtls: sync with polarssl config

One of those changes is re-enabling blowfish support to make
openvpn-mbedtls compatible with common configurations

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoopenvpn: quote parameters to --push in openvpn config file
Magnus Kroken [Sat, 10 Dec 2016 11:02:03 +0000 (12:02 +0100)]
openvpn: quote parameters to --push in openvpn config file

OpenVPN requires arguments to --push to be enclosed in double quotes.
One set of quotes is stripped when the UCI config is parsed.
Change append_params() of openvpn.init to enclose push parameters in
double quotes.

Unquoted push parameters do not cause errors in OpenVPN 2.3,
but OpenVPN 2.4 fails to start with unquoted push parameters.

Fixes: FS#290.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
7 years agombedtls: enable MBEDTLS_DHM_C
Magnus Kroken [Fri, 9 Dec 2016 20:07:37 +0000 (21:07 +0100)]
mbedtls: enable MBEDTLS_DHM_C

This option is required by OpenVPN, and OpenVPN 2.4 uses mbedTLS 2.x.
DHM_C is also already enabled in the PolarSSL 1.3.x config.h.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
7 years agoar71xx: remove obsolete flash chip locking code
Felix Fietkau [Fri, 9 Dec 2016 20:07:33 +0000 (21:07 +0100)]
ar71xx: remove obsolete flash chip locking code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: remove PB92 reference design board support
Felix Fietkau [Fri, 9 Dec 2016 13:29:21 +0000 (14:29 +0100)]
ar71xx: remove PB92 reference design board support

Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: remove AP113 reference design board support
Felix Fietkau [Fri, 9 Dec 2016 13:26:12 +0000 (14:26 +0100)]
ar71xx: remove AP113 reference design board support

Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: remove AP81 reference design board support
Felix Fietkau [Fri, 9 Dec 2016 13:23:39 +0000 (14:23 +0100)]
ar71xx: remove AP81 reference design board support

This board is very old and unlikely to still be relevant today.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: remove obsolete duplicate driver source file
Felix Fietkau [Fri, 9 Dec 2016 09:07:14 +0000 (10:07 +0100)]
ar71xx: remove obsolete duplicate driver source file

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: remove AP83 reference design board support
Felix Fietkau [Thu, 8 Dec 2016 20:46:15 +0000 (21:46 +0100)]
ar71xx: remove AP83 reference design board support

This board is very old and unlikely to still be relevant today. Support
for it contains a significant amount of device specific baggage which is
worth getting rid of.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: clean up spi controller related patches
Felix Fietkau [Thu, 8 Dec 2016 20:10:50 +0000 (21:10 +0100)]
ar71xx: clean up spi controller related patches

Remove various hacks for fast read, un-break device tree support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobcm53xx: disable CONFIG_FW_LOADER_USER_HELPER_FALLBACK
Rafał Miłecki [Sun, 11 Dec 2016 12:05:08 +0000 (13:05 +0100)]
bcm53xx: disable CONFIG_FW_LOADER_USER_HELPER_FALLBACK

There are many targets using user space scripts to generate firmware but
bcm53xx doesn't need this, so let's disable that kernel option.

This lets us avoid some scary-looking kernel warnings like:
brcmfmac 0001:04:00.0: Falling back to user helper
firmware brcm!brcmfmac43602-pcie.txt: firmware_loading_store: map pages failed

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agolantiq: remove "init" kernel command line parameter from bootargs
Martin Blumenstingl [Sun, 11 Dec 2016 20:55:01 +0000 (21:55 +0100)]
lantiq: remove "init" kernel command line parameter from bootargs

/etc/preinit has been the default init-script for a very long time (at
least since Linux 2.6.30 in OpenWrt). Remove the kernel command line
"init" parameter to get rid of duplicate and inconsistent definitions
of this parameter (some boards, like FRITZ3370 for example did not use
it at all, while it's just copy and paste on others).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
7 years agolantiq: specify console using stdout-path instead of cmdline argument
Martin Blumenstingl [Sun, 11 Dec 2016 20:55:00 +0000 (21:55 +0100)]
lantiq: specify console using stdout-path instead of cmdline argument

Use devicetree's /chosen/stdout-path instead of the kernel command line
(embedded in the .dts-files) to specify the serial console. Using the
chosen node is recommended on devicetree based platforms.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
7 years agouboot-envtools: add support for YunCore SR3200 and XD3200
Piotr Dymacz [Fri, 2 Dec 2016 22:01:44 +0000 (23:01 +0100)]
uboot-envtools: add support for YunCore SR3200 and XD3200

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoar71xx: add support for YunCore SR3200 and XD3200
Piotr Dymacz [Fri, 2 Dec 2016 21:42:41 +0000 (22:42 +0100)]
ar71xx: add support for YunCore SR3200 and XD3200

YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros
QCA9563+QCA9882+QCA8337N.

YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount
AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334.

Common specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB or RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm
- 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm

SR3200 specification:

- 5x 10/100/1000 Mbps Ethernet
- 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips)
- 3x LED (+ 5x LED in RJ45 sockets), 1x button
- UART header on PCB

XD3200 specification:

- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)
- 4x internal antennas
- 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button
- UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB

LED for 5 GHz WLAN is currently not supported on both devices as it is
connected directly to the QCA9882 radio chip.

Flash instruction under vendor firmware, using telnet/SSH:

1. If your firmware does not have root password, go to point 5
2. Connect PC with 192.168.1.x address to LAN or WAN port
3. Power up device, enter failsafe mode with button (no LED indicator!)
4. Change root password and reboot (mount_root, passwd ..., reboot -f)
5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP
6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
7. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
- mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware

Flash instruction under U-Boot, using UART:

1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
5. saveenv && reset

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoca-certificates: update to version 20161130
Christian Schoenebeck [Mon, 5 Dec 2016 20:21:36 +0000 (21:21 +0100)]
ca-certificates: update to version 20161130

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
7 years agolayerscape: add 64b/32b target for ls1046ardb device
Yutang Jiang [Wed, 7 Dec 2016 16:07:42 +0000 (00:07 +0800)]
layerscape: add 64b/32b target for ls1046ardb device

Add support for NXP layerscape ls1046ardb 64b/32b Dev board.

LS1046ARDB Specification:
-------------------------
Memory subsystem:
* 8GByte DDR4 SDRAM (64bit bus)
* 512 Mbyte NAND flash
* Two 64 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
* On-board 4G eMMC
Ethernet:
* Two XFI 10G ports
* Two SGMII ports
* Two RGMII ports
PCIe:
* PCIe1 (SerDes2 Lane0) to miniPCIe slot
* PCIe2 (SerDes2 Lane1) to x2 PCIe slot
* PCIe3 (SerDes2 Lane2) to x4 PCIe slot

* USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port
* UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
7 years agolayerscape: fman-ucode: prefer github over git.freescale.com
Yutang Jiang [Fri, 2 Dec 2016 16:09:47 +0000 (00:09 +0800)]
layerscape: fman-ucode: prefer github over git.freescale.com

In order to prevent the impact of the merger of the company and the potential
rebase of the SDK repositories, migrate the u-boot source to github.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
7 years agolayerscape: uboot-layerscape: prefer github over git.freescale.com
Yutang Jiang [Thu, 1 Dec 2016 15:01:27 +0000 (23:01 +0800)]
layerscape: uboot-layerscape: prefer github over git.freescale.com

In order to prevent the impact of the merger of the company and the potential
rebase of the SDK repositories, migrate the u-boot source to github.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
7 years agobase-files: Changed UCI variable name for GPIO value from 'default' to 'value'
Julian Labus [Thu, 8 Dec 2016 16:13:09 +0000 (17:13 +0100)]
base-files: Changed UCI variable name for GPIO value from 'default' to 'value'

This changes the UCI variable for the GPIO value from system.$cfg.default back
to system.$cfg.value as it was before the change from uci-defaults [1] to board.d.
/etc/init.d/gpio_switch [2] still expects the value to be in system.$cfg.value.

[1] https://github.com/lede-project/source/blob/d65916047b44d6d157d88d15e8e3d92555c5e6f8/package/base-files/files/lib/functions/uci-defaults.sh#L197
[2] https://github.com/lede-project/source/blob/master/package/base-files/files/etc/init.d/gpio_switch#L17

Signed-off-by: Julian Labus <julian@labus-online.de>
7 years agolantiq: falcon: remove bootargs-append
Hauke Mehrtens [Sun, 4 Dec 2016 18:03:48 +0000 (19:03 +0100)]
lantiq: falcon: remove bootargs-append

This attribute is not evaluated any more and the boot loader on these
reference boards does not provide a broken root= or console= parameter.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agokernel: add TI tmp102 and tmp103 temperature sensors
Hauke Mehrtens [Sun, 4 Dec 2016 13:19:07 +0000 (14:19 +0100)]
kernel: add TI tmp102 and tmp103 temperature sensors

This just adds the kmods for these kernel modules.
This is found on some Lantiq / Intel reference boards.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agokernel: add KERNEL_DEBUG_PINCTRL and KERNEL_DEBUG_GPIO
Hauke Mehrtens [Sun, 4 Dec 2016 13:33:30 +0000 (14:33 +0100)]
kernel: add KERNEL_DEBUG_PINCTRL and KERNEL_DEBUG_GPIO

This makes it possible to activate the gpio and the pinctl debugging
from LEDE menuconfig.

Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobuild: support adding version code to file names (FS#323)
Jo-Philipp Wich [Mon, 5 Dec 2016 15:44:13 +0000 (16:44 +0100)]
build: support adding version code to file names (FS#323)

Now that the VERSION_NUMBER variable holds the human friendly name and not
the commit ID anymore, we need to support adding the revision ID as well.

Introduce a new config variable CONFIG_VERSION_CODE_FILENAMES which, if set,
causes the resulting file names to contain a commit ID designation as printed
by scripts/getver.sh.

Also sanitize the input variables to ensure that the resulting strings are
lowercased and no not contain spaces.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agolantiq: simplify ath9k eeprom extraction script
Mathias Kresin [Mon, 5 Dec 2016 08:21:29 +0000 (09:21 +0100)]
lantiq: simplify ath9k eeprom extraction script

Add an extra function to patch the mac and fixup the checksum
afterwards. Calculate the checksum position automatically. The offset
to the mac address is the same for all checksum protected EEPROMs.

No EEPROM requires a byte swapped mac address. The mac byte swap code
was required due to an bug in the script that is now fixed.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agolantiq: fix ath9k EEPROM data swapping for some devices
Martin Blumenstingl [Sun, 4 Dec 2016 07:26:55 +0000 (08:26 +0100)]
lantiq: fix ath9k EEPROM data swapping for some devices

The EEPROM data in the flash of the ARV7518PW, ARV8539PW22,
BTHOMEHUBV2B and BTHOMEHUBV3A is stored byte-swapped (swab16), meaning
that for example the ath9k base_eep_header fields "version" (high and
low byte), "opCapFlags" and "eepMisc" are swapped (the latter ones are
just 1 byte wide, thus their position is swapped).

The old "ath,eep-endian" property enabled the corresponding swapping
logic in the ath9k driver (swab16 in ath9k_hw_nvram_swap_data, which is
based on the magic bytes in the EEPROM data which have nothing to do
with the calibration data - thus this logic should not be used
anymore).
Since we have switched to the upstream ath9k devicetree bindings there
is no binding anymore which enables swab16 in ath9k (as this logic is
not recommended anymore as explained above), leading to ath9k
initialization errors:
ath: phy0: Bad EEPROM VER 0x0001 or REV 0x00e0
(this shows that the version field is swapped, expected values are VER
0x000E and REV 0x0001)

Swapping the ath9k calibration data when extracting it from the flash
fixes the devices listed above (all other devices do not require
additional swapping, since the position of the fields is already as
expected by ath9k). This allows ath9k to read the version correctly
again, as well as the more important "eepmisc" field (which is used for
determining whether the data inside the EEPROM is Big or Little Endian
which is required to parse the EEPROM contents correctly).

Fixes: a20616863d3 ("lantiq: use ath9k device tree bindings
binding/owl-loader")

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
7 years agobcm53xx: update patch adding fake USB doorbell
Rafał Miłecki [Wed, 7 Dec 2016 08:21:11 +0000 (09:21 +0100)]
bcm53xx: update patch adding fake USB doorbell

Rob suggested I should use of_machine_is_compatible insteak of a new
property and updated patch has been sent.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agodnsmasq: Fix splitting hostid for DHCPv6 static leases
Arjen de Korte [Mon, 5 Dec 2016 11:53:16 +0000 (12:53 +0100)]
dnsmasq: Fix splitting hostid for DHCPv6 static leases

Correct splitting the 32-bit 'hostid' value to two 16-bit hexadecimal
values. Previously, the lower 16-bit value was truncated to an 8-bit
value, which would result in hostid values 100 and 200 both to be set
to [::0:0] instead of [::0:100] and [::0:200] respectively.

Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
7 years agokernel: backport LED patch which will allow better DT integration
Rafał Miłecki [Tue, 6 Dec 2016 18:48:20 +0000 (19:48 +0100)]
kernel: backport LED patch which will allow better DT integration

It's not used by any driver yet, it may just simplify development and
testing new features.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agokernel: fix potential crash in usbport LED trigger driver
Rafał Miłecki [Tue, 6 Dec 2016 18:19:53 +0000 (19:19 +0100)]
kernel: fix potential crash in usbport LED trigger driver

This backports upstream accepted fix.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoar71xx: fix LEDs and sysupgrade support for TL-WA801ND v3
Matthias Schiffer [Tue, 6 Dec 2016 15:18:49 +0000 (16:18 +0100)]
ar71xx: fix LEDs and sysupgrade support for TL-WA801ND v3

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
7 years agotools/upslug2: add SHA256 hash to use mirror tarball
Felix Fietkau [Mon, 5 Dec 2016 10:37:42 +0000 (11:37 +0100)]
tools/upslug2: add SHA256 hash to use mirror tarball

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agodnsmasq: reload config if host name is modified
Florian Eckert [Wed, 30 Nov 2016 08:08:21 +0000 (09:08 +0100)]
dnsmasq: reload config if host name is modified

If the hostname in /etc/config/system is modified the dnsmasq will not
reread the update host file under /tmp/hosts/dhcp.$cfg.

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
7 years agoramips: Fix led init script for Lenovo Y1/Y1s
BangLang Huang [Fri, 2 Dec 2016 01:33:23 +0000 (09:33 +0800)]
ramips: Fix led init script for Lenovo Y1/Y1s

This commit fix the led init script for Lenovo Y1 and
Y1S due to the manual and dts file.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agobrcm2708: update linux 4.4 patches to latest version
Álvaro Fernández Rojas [Fri, 2 Dec 2016 10:50:26 +0000 (11:50 +0100)]
brcm2708: update linux 4.4 patches to latest version

As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
7 years agobrcm2708-gpu-fw: update to latest version
Álvaro Fernández Rojas [Thu, 24 Nov 2016 12:27:28 +0000 (13:27 +0100)]
brcm2708-gpu-fw: update to latest version

Also switches hases to SHA256

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
7 years agokernel: bump to 4.4.36
Álvaro Fernández Rojas [Fri, 2 Dec 2016 10:43:17 +0000 (11:43 +0100)]
kernel: bump to 4.4.36

Refresh patches on all 4.4 supported platforms.
Compile & run tested: brcm2708/bcm2710 - Raspberry Pi 3

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
7 years agolibs: libnetfilter-queue: update to a newer version in git repo
Alexandru Ardelean [Tue, 22 Nov 2016 12:11:12 +0000 (14:11 +0200)]
libs: libnetfilter-queue: update to a newer version in git repo

Last release of libnetfilter-queue was in 2012.
There don't seem to be any release tarballs since then.

This updates it to a more recent version, pointing to the git repo.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>