Jonas Gorski [Wed, 22 May 2013 08:26:57 +0000 (08:26 +0000)]
gcc: fix avr32 default GCC version
Fix gcc version default after r36355 removing all GCC_DEFAULT_VERSION
symbols.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36688
Steven Barth [Tue, 21 May 2013 18:05:37 +0000 (18:05 +0000)]
6relayd: Fix a segfault when multiple downstream interfaces are present
SVN-Revision: 36687
Jo-Philipp Wich [Tue, 21 May 2013 14:49:37 +0000 (14:49 +0000)]
firewall3: update to git head
- fixes segfault in flush command if ipset support is not available
- fixes internal rule generation if custom chains are enabled
SVN-Revision: 36686
Jo-Philipp Wich [Tue, 21 May 2013 13:00:28 +0000 (13:00 +0000)]
ipset: remove dependency on iptables-mod-ipset - technically it does not depend on it and the iptables matches are now part of the base
SVN-Revision: 36685
Jo-Philipp Wich [Tue, 21 May 2013 12:58:36 +0000 (12:58 +0000)]
firewall3: move libext*.a copying to compile phase
SVN-Revision: 36684
Jo-Philipp Wich [Tue, 21 May 2013 12:58:15 +0000 (12:58 +0000)]
netfilter: move time, mark, set matches and MARK, REDIRECT, SET targets into base iptables package - drop iptables-mod-ipset
SVN-Revision: 36683
Jo-Philipp Wich [Tue, 21 May 2013 10:15:14 +0000 (10:15 +0000)]
firewall3: update to git head
* use libiptc and libxtables directly to manage ruleset, iptables-restore is unreliable and prone to race conditions
* make ipset integration more reliable
SVN-Revision: 36681
Jo-Philipp Wich [Tue, 21 May 2013 10:15:10 +0000 (10:15 +0000)]
iptables: use -ffunction-sections, -fdata-sections and --gc-sections
SVN-Revision: 36680
Felix Fietkau [Tue, 21 May 2013 09:45:46 +0000 (09:45 +0000)]
ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36679
Steven Barth [Tue, 21 May 2013 09:13:48 +0000 (09:13 +0000)]
odhcp6c: Various fixes * Honour T1 and T2 values from servers better * Correctly send Reconfigure-Accept option in requests
SVN-Revision: 36678
Steven Barth [Tue, 21 May 2013 09:13:40 +0000 (09:13 +0000)]
6relayd: Various DHCPv6-fixes * Be more standards-compliant in stateful mode * Handle hostnames from Windows-clients correctly * Handle messages from DHCPv6-relays better
SVN-Revision: 36677
Jonas Gorski [Mon, 20 May 2013 16:57:00 +0000 (16:57 +0000)]
kernel: update 3.9 to 3.9.3
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36676
Steven Barth [Mon, 20 May 2013 14:54:20 +0000 (14:54 +0000)]
odhcp6c: Fix address / prefix expiry logic
SVN-Revision: 36675
Jonas Gorski [Mon, 20 May 2013 12:42:44 +0000 (12:42 +0000)]
ar7: drop obsolete 3.3 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36674
Jonas Gorski [Mon, 20 May 2013 12:42:41 +0000 (12:42 +0000)]
ar7: drop obsolete 3.6 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36673
Jonas Gorski [Mon, 20 May 2013 12:42:38 +0000 (12:42 +0000)]
ar7: switch to 3.9
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36672
Jonas Gorski [Mon, 20 May 2013 12:42:36 +0000 (12:42 +0000)]
ar7: add support for 3.9
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36671
Jonas Gorski [Mon, 20 May 2013 12:42:32 +0000 (12:42 +0000)]
kernel: add some missing symbols/move them to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36670
Jonas Gorski [Mon, 20 May 2013 12:07:03 +0000 (12:07 +0000)]
brcm2708: make it boot on revision 2 raspberry pis
* update the bootcode.bin to the newest version
- gpu/cpu mem split is now configured through config.txt, so no need
to create more than one sd card image (just edit the config.txt)
- bootcode.bin now supports the never revision 2 raspberry pis
* add a commented prepopulated config.txt for easier config changes
Taken from <https://github.com/Evilpaul/RPi-config>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36668
Jonas Gorski [Mon, 20 May 2013 12:07:00 +0000 (12:07 +0000)]
brcm2708-gpu-fw: download zipped sources and switch to Hexxeh's git
* Use the gzipped download feature from github to get a tarball with a
stable hash.
* Use Liam McLoughlin's git which has a subset of the original git's
contents, dropping all the precompiled modules and kernels.
Reduces the download size from ~1.27 GiB to ~25 MiB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36667
Jonas Gorski [Mon, 20 May 2013 12:06:57 +0000 (12:06 +0000)]
mac80211: remove superfluous patch
This is already handles in compat-3.8.h as prandom* was introduced
in 3.8; only the aliases were removed in 3.10.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36666
Luka Perkov [Mon, 20 May 2013 08:52:44 +0000 (08:52 +0000)]
uboot-envtools: upgrade to 2013.04
SVN-Revision: 36665
Jonas Gorski [Sun, 19 May 2013 18:36:15 +0000 (18:36 +0000)]
kernel: generic: add 3.10-rc1 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36663
Jonas Gorski [Sun, 19 May 2013 18:36:09 +0000 (18:36 +0000)]
kernel: adapt module paths for 3.10-rc1
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36662
Jonas Gorski [Sun, 19 May 2013 18:36:06 +0000 (18:36 +0000)]
mac80211: make it build with 3.10-rc1
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36661
Jonas Gorski [Sun, 19 May 2013 18:32:13 +0000 (18:32 +0000)]
bcm63xx: add 3.9 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36660
Jonas Gorski [Sun, 19 May 2013 18:32:02 +0000 (18:32 +0000)]
bcm63xx: Simplify CFE detection.
Check bootloader argument in mtd.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36659
Jonas Gorski [Sun, 19 May 2013 18:31:51 +0000 (18:31 +0000)]
kernel: update 3.9 to 3.9.2
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36658
Jonas Gorski [Sun, 19 May 2013 11:27:28 +0000 (11:27 +0000)]
kernel: don't remove of_tables
These are needed for OF setup of clocksource, clocks and irqchips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36657
Felix Fietkau [Sat, 18 May 2013 19:36:22 +0000 (19:36 +0000)]
ath9k: fix some more aggregation related issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36656
Steven Barth [Fri, 17 May 2013 14:44:12 +0000 (14:44 +0000)]
dnsmasq: add directory for external hosts-files
SVN-Revision: 36655
Steven Barth [Fri, 17 May 2013 14:44:07 +0000 (14:44 +0000)]
6relayd: Add stateful DHCPv6-support (IA_NA) * Add management_level option (0: set O-flag, >=1: set M-flag) * Add support for static DHCPv6-leases * Various fixes for DHCPv6-PD
SVN-Revision: 36654
Steven Barth [Fri, 17 May 2013 14:44:02 +0000 (14:44 +0000)]
netifd: Unify interface-based routing for IPv4 and IPv6 * Add interface option to set routing table for protocol routes * Enabled for IPv6 for source-based filtering, disabled for IPv4
Based on a patch by Kristian Evensen. Thank You.
SVN-Revision: 36653
Luka Perkov [Fri, 17 May 2013 11:27:20 +0000 (11:27 +0000)]
Config.in: expose symbols specific to lxc in separate item
SVN-Revision: 36650
Felix Fietkau [Fri, 17 May 2013 09:37:19 +0000 (09:37 +0000)]
ath9k: merge some aggregation / rate handling related fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36648
Felix Fietkau [Fri, 17 May 2013 09:37:15 +0000 (09:37 +0000)]
valgrind: enable parallel builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36647
Felix Fietkau [Fri, 17 May 2013 07:31:00 +0000 (07:31 +0000)]
ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36646
Felix Fietkau [Thu, 16 May 2013 11:41:54 +0000 (11:41 +0000)]
mac80211: add a rate control rate selection fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36645
Felix Fietkau [Thu, 16 May 2013 11:38:19 +0000 (11:38 +0000)]
uhttpd: update to latest version, fixes index page processing order
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36644
Felix Fietkau [Thu, 16 May 2013 11:38:12 +0000 (11:38 +0000)]
trace-cmd: update to latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36643
Luka Perkov [Thu, 16 May 2013 00:04:48 +0000 (00:04 +0000)]
iproute2: workaround compile issues with gcc 4.8.x
SVN-Revision: 36642
Steven Barth [Wed, 15 May 2013 11:07:01 +0000 (11:07 +0000)]
odhcp6c: Fix handling of RAs when no DHCPv6-server is present
SVN-Revision: 36641
Felix Fietkau [Wed, 15 May 2013 09:36:10 +0000 (09:36 +0000)]
mac80211: add mesh_param support
This patch add mesh_param support in mac80211.sh
It suppose that this patch http://patchwork.openwrt.org/patch/3540/ is applied (add HT support for mesh)
Tested with rspro(ar9280)/wr1043nd, BB r36211
see also this http://lists.open80211s.org/pipermail/devel/2012-June/003352.html
(mesh_hwmp_rootmode 1 & mesh_gate_announcements 1
=> mesh_hwmp_rootmode 4 & mesh_gate_announcements 1)
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 36640
Felix Fietkau [Wed, 15 May 2013 09:36:02 +0000 (09:36 +0000)]
mac80211: add HT support for mesh
This is a quick patch to enable HT for mesh mode
https://github.com/cozybit/open80211s/wiki/HOWTO#high-throughput
http://lists.open80211s.org/pipermail/devel/2012-March/002990.html
For my test setup the speed increased from 1-2 Mbytes/sec to 8-10 Mbytes/sec (iperf)
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 36639
Luka Perkov [Tue, 14 May 2013 23:49:34 +0000 (23:49 +0000)]
iproute2: upgrade to 3.9.0
SVN-Revision: 36638
Luka Perkov [Tue, 14 May 2013 23:49:31 +0000 (23:49 +0000)]
iproute2: print help in connmark
SVN-Revision: 36637
Felix Fietkau [Tue, 14 May 2013 17:43:00 +0000 (17:43 +0000)]
uhttpd: update to latest version, fixes a SSL connection memory leak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36636
Felix Fietkau [Tue, 14 May 2013 15:02:31 +0000 (15:02 +0000)]
package: fold the IPv6 menu into Network
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36634
Felix Fietkau [Tue, 14 May 2013 11:02:01 +0000 (11:02 +0000)]
mac80211: fix AP mode action frame handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36633
Felix Fietkau [Tue, 14 May 2013 11:01:54 +0000 (11:01 +0000)]
mac80211: fix client mode state handling issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36632
Felix Fietkau [Mon, 13 May 2013 19:13:33 +0000 (19:13 +0000)]
ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36631
Felix Fietkau [Mon, 13 May 2013 19:13:27 +0000 (19:13 +0000)]
kernel: add missing PHY ID for an AR8327 switch variant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36630
Steven Barth [Mon, 13 May 2013 17:54:36 +0000 (17:54 +0000)]
6relayd: Always announce the current MAC-address
* Fixes #13516 thanks to berni for the detailed bugreport.
SVN-Revision: 36629
Steven Barth [Mon, 13 May 2013 17:12:39 +0000 (17:12 +0000)]
ds-lite: add ds-lite network protocol handler
SVN-Revision: 36628
Steven Barth [Mon, 13 May 2013 17:12:34 +0000 (17:12 +0000)]
netifd: Various IPv6 improvements * Add support for IP-in-IPv6 tunnels (DS-Lite) * Use source-based routing for IPv6 to allow multi-wan * Various smaller tunnel setup improvements
SVN-Revision: 36627
Steven Barth [Mon, 13 May 2013 17:12:30 +0000 (17:12 +0000)]
netifd: added support for setting up 6rd from DHCP
SVN-Revision: 36626
Steven Barth [Mon, 13 May 2013 17:12:25 +0000 (17:12 +0000)]
odhcp6c: added support for DS-Lite + various fixes
SVN-Revision: 36625
Steven Barth [Mon, 13 May 2013 17:12:20 +0000 (17:12 +0000)]
firewall3: Remove obsoleted ULA-border
SVN-Revision: 36624
Steven Barth [Mon, 13 May 2013 17:12:15 +0000 (17:12 +0000)]
firewall3: add wan6 interface to wan-zone by default
SVN-Revision: 36623
Steven Barth [Mon, 13 May 2013 17:12:10 +0000 (17:12 +0000)]
firewall: Remove obsoleted ULA-border rule
SVN-Revision: 36622
Felix Fietkau [Mon, 13 May 2013 15:05:03 +0000 (15:05 +0000)]
valgrind: do not depend on a particular ARM target, depend on the arch level
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36621
Felix Fietkau [Mon, 13 May 2013 15:04:58 +0000 (15:04 +0000)]
build: add config symbols for different ARM arch levels
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36620
Jonas Gorski [Sun, 12 May 2013 21:41:55 +0000 (21:41 +0000)]
kernel: move CONFIG_MIPS_SEAD3 to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
Jonas Gorski [Sun, 12 May 2013 21:41:52 +0000 (21:41 +0000)]
bcm63xx: don't build CRAMFS
Don't build the CRAMFS file system module in the kernel, and save some bytes.
No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36616
Jonas Gorski [Sun, 12 May 2013 21:41:50 +0000 (21:41 +0000)]
led and buttons support for board DWV-S0
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36615
Jonas Gorski [Sun, 12 May 2013 11:54:38 +0000 (11:54 +0000)]
bcm63xx: remove defconfig support
All boards use uci-defaults, no need to keep defconfig support.
SVN-Revision: 36610
Jonas Gorski [Sun, 12 May 2013 10:55:12 +0000 (10:55 +0000)]
kernel: fix CVE-2013-1763 in older kernels
Newer kernels were already fixed by upstream.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36607
Steven Barth [Sun, 12 May 2013 08:07:15 +0000 (08:07 +0000)]
6rd: increase metric of default route
This will prefer native IPv6 over 6rd if both are present.
SVN-Revision: 36605
Jo-Philipp Wich [Sun, 12 May 2013 01:12:56 +0000 (01:12 +0000)]
iwinfo: only consider joined bss when finding current operating frequency, fixes spurious misreporting of frequencies in ad-hoc mode
SVN-Revision: 36604
Felix Fietkau [Sat, 11 May 2013 20:42:41 +0000 (20:42 +0000)]
ubus: update to the latest version, fixes a rare deadlock with multiple synchronous invoke/notify calls
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36603
Felix Fietkau [Fri, 10 May 2013 00:18:27 +0000 (00:18 +0000)]
openssl: disable mips16, it makes the code slower
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36602
Felix Fietkau [Thu, 9 May 2013 23:49:03 +0000 (23:49 +0000)]
px5g: disable assembler functions, fixes compile errors with mips16
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36601
Felix Fietkau [Thu, 9 May 2013 23:32:46 +0000 (23:32 +0000)]
ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36600
Felix Fietkau [Thu, 9 May 2013 20:50:58 +0000 (20:50 +0000)]
scripts/remote-gdb: add support for debugging core files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36596
Felix Fietkau [Thu, 9 May 2013 20:50:54 +0000 (20:50 +0000)]
scripts/remote-gdb: fix path when built for musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36595
Felix Fietkau [Thu, 9 May 2013 20:50:49 +0000 (20:50 +0000)]
toolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandatory - fixes recursive config symbol dependency issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36594
Jonas Gorski [Thu, 9 May 2013 20:50:10 +0000 (20:50 +0000)]
kernel: modules: kmod-fs-isofs depends on kmod-lib-zlib
Add missing dependency. Fixes #11624.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36593
Jonas Gorski [Thu, 9 May 2013 20:50:07 +0000 (20:50 +0000)]
kernel: make zlib and lzo modules selectable
Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36592
Felix Fietkau [Thu, 9 May 2013 20:34:21 +0000 (20:34 +0000)]
toolchain/musl: add version 0.9.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36591
Felix Fietkau [Thu, 9 May 2013 20:02:57 +0000 (20:02 +0000)]
toolchain/musl: fix libstdc++ build issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36590
Hauke Mehrtens [Thu, 9 May 2013 20:01:58 +0000 (20:01 +0000)]
kernel: b53: use correct oops for bcm5365 switch
SVN-Revision: 36589
Felix Fietkau [Thu, 9 May 2013 19:26:53 +0000 (19:26 +0000)]
toolchain/musl: fix build issues on mac os x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36588
Jonas Gorski [Thu, 9 May 2013 19:19:36 +0000 (19:19 +0000)]
kernel: allow building zsmalloc as a module again
zsmalloc was changed to a bool because of missing exports in the kernel,
but we already export the required symbol, so change it back to tristate.
Closes #13481.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36587
Gabor Juhos [Wed, 8 May 2013 17:11:10 +0000 (17:11 +0000)]
ar71xx: use combined kernel image in the CameoHornet template
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36584
Gabor Juhos [Wed, 8 May 2013 17:11:08 +0000 (17:11 +0000)]
firmware-utils/mkcameofw: allow to use combined kernel image
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36583
Gabor Juhos [Wed, 8 May 2013 17:07:19 +0000 (17:07 +0000)]
ar71xx: add profile and build image for the RNX-N360RT board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36582
Gabor Juhos [Wed, 8 May 2013 17:07:18 +0000 (17:07 +0000)]
ar71xx: add user-space model detection for the RNX-N360RT board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36581
Gabor Juhos [Wed, 8 May 2013 17:03:43 +0000 (17:03 +0000)]
ar71xx: add profile and build image for Netgear WNDAP360
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36580
Gabor Juhos [Wed, 8 May 2013 17:03:42 +0000 (17:03 +0000)]
ar71xx: add user-space support for Netgear WNDAP360
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36579
Gabor Juhos [Wed, 8 May 2013 17:03:34 +0000 (17:03 +0000)]
ar71xx: add kernel support for Netgear WNDAP360
Here is corrected version (only thing not working are wifi LEDs).
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36578
Gabor Juhos [Wed, 8 May 2013 08:53:55 +0000 (08:53 +0000)]
kernel: update linux 3.9 to 3.9.1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36577
Gabor Juhos [Wed, 8 May 2013 08:53:53 +0000 (08:53 +0000)]
kernel: update linux 3.8 to 3.8.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
Gabor Juhos [Wed, 8 May 2013 08:53:49 +0000 (08:53 +0000)]
ar71xx: Fix AP135 partition layout
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36575
John Crispin [Tue, 7 May 2013 12:35:07 +0000 (12:35 +0000)]
grub2: Add sub package grub-editenv for target installation
grub-editenv allows to modify grub2 environment files. Add a new package
that build grub2 for the target and packs up grub-editenv.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 36574
John Crispin [Tue, 7 May 2013 10:58:52 +0000 (10:58 +0000)]
lantiq: enable portmaps again and set max port to 2
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36573
John Crispin [Tue, 7 May 2013 10:58:44 +0000 (10:58 +0000)]
ramips: drop 3.7 support
Signed-off-by; John Crispin <blogic@openwrt.org>
SVN-Revision: 36572
John Crispin [Tue, 7 May 2013 10:58:30 +0000 (10:58 +0000)]
ramips: properly setup the FEATURES variable
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36571
Steven Barth [Tue, 7 May 2013 07:19:51 +0000 (07:19 +0000)]
add uci support for "proxy-dnssec" in dnsmasq
This patch simply adds support for the "--proxy-dnssec" command in dnsmasq into the init file so it can be used with /etc/config/dhcp.
Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>
SVN-Revision: 36570
Felix Fietkau [Mon, 6 May 2013 22:35:50 +0000 (22:35 +0000)]
iw: update to 3.10, sync with nl80211.h changes in compat-wireless
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36569
John Crispin [Mon, 6 May 2013 18:23:56 +0000 (18:23 +0000)]
ramips: fix memory detection rt5350
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 36568
projects / oweals / openwrt.git / log