Grant Likely [Tue, 3 Jul 2007 06:17:28 +0000 (00:17 -0600)]
Fix Makefile to use $(MKCONFIG) macro for all board ports
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:49 +0000 (00:34 -0600)]
Correct fixup relocation for mpc83xx
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:44 +0000 (00:34 -0600)]
Correct fixup relocation for mpc8260
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:39 +0000 (00:34 -0600)]
Correct fixup relocation for mpc824x
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:34 +0000 (00:34 -0600)]
Correct fixup relocation for mpc8220
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:29 +0000 (00:34 -0600)]
Correct fixup relocation for MPC5xxx
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:24 +0000 (00:34 -0600)]
Correct relocation fixup for mpc5xx
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:19 +0000 (00:34 -0600)]
Don't set gd->reloc_off if relocation of .fixup works correctly
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:14 +0000 (00:34 -0600)]
Remove obsolete mpc83xx linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:09 +0000 (00:34 -0600)]
Consolidate mpc8260 linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:34:04 +0000 (00:34 -0600)]
Remove obsolete mpc824x linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:59 +0000 (00:33 -0600)]
Remove obsolete mpc824x linker scripts (3 of 4)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:53 +0000 (00:33 -0600)]
Remove obsolete mpc824x linker scripts (2 of 4)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:48 +0000 (00:33 -0600)]
Remove obsolete mpc824x linker scripts (1 of 4)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:43 +0000 (00:33 -0600)]
Remove obsolete mpc8220 linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:38 +0000 (00:33 -0600)]
Remove obsolete mpc5xxx linker scripts (3 of 3)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:33 +0000 (00:33 -0600)]
Remove obsolete mpc5xxx linker scripts (2 of 3)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:28 +0000 (00:33 -0600)]
Remove obsolete mpc5xxx linker scripts (1 of 3)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:23 +0000 (00:33 -0600)]
Remove obsolete mpc5xx linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:18 +0000 (00:33 -0600)]
Consolidate mpc83xx linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:13 +0000 (00:33 -0600)]
Consolidate mpc8260 linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:08 +0000 (00:33 -0600)]
Consolidate mpc824x linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:33:03 +0000 (00:33 -0600)]
Consolidate mpc8220 linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:32:58 +0000 (00:32 -0600)]
Consolidate mpc5xxx linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Tue, 3 Jul 2007 06:32:53 +0000 (00:32 -0600)]
Consolidate mpc5xx linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Wolfgang Denk [Tue, 3 Jul 2007 22:43:53 +0000 (00:43 +0200)]
Fix a few file permission problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 3 Jul 2007 22:38:38 +0000 (00:38 +0200)]
Minor coding style cleanup. Rebuild CHANGELOG file.
Jon Loeliger [Tue, 12 Jun 2007 00:03:44 +0000 (19:03 -0500)]
configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:39 +0000 (19:03 -0500)]
README: Rewrite command line config to use CONFIG_CMD_* names.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:34 +0000 (19:03 -0500)]
include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:28 +0000 (19:03 -0500)]
tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:23 +0000 (19:03 -0500)]
board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:19 +0000 (19:03 -0500)]
board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:15 +0000 (19:03 -0500)]
cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:08 +0000 (19:03 -0500)]
cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:03:03 +0000 (19:03 -0500)]
lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:02:58 +0000 (19:02 -0500)]
lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:02:53 +0000 (19:02 -0500)]
rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:02:49 +0000 (19:02 -0500)]
net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:02:34 +0000 (19:02 -0500)]
disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:02:20 +0000 (19:02 -0500)]
fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:02:10 +0000 (19:02 -0500)]
drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:02:05 +0000 (19:02 -0500)]
common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:01:54 +0000 (19:01 -0500)]
common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:01:43 +0000 (19:01 -0500)]
common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 12 Jun 2007 00:01:34 +0000 (19:01 -0500)]
Introduce initial versions of new Command Config files.
Derive three new files from cmd_confdefs.h:
config_bootp.h - Has BOOTP related config options, not commands
config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
For now, include "config_bootp.h" for compatability until all
users of it directly include it properly.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk [Tue, 3 Jul 2007 13:07:56 +0000 (15:07 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-testing
Mushtaq Khan [Sat, 30 Jun 2007 16:50:48 +0000 (18:50 +0200)]
Fix S-ATA support.
Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
Stefan Roese [Mon, 25 Jun 2007 18:20:30 +0000 (20:20 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Niklaus Giger [Mon, 25 Jun 2007 15:03:13 +0000 (17:03 +0200)]
ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
This patch prints the DDR status registers upon machine check
interrupt on the 440EPx/GRx. This can be useful especially when
ECC support is enabled.
I added some small changes to the original patch from Niklaus to
make it compile clean.
Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Niklaus Giger [Mon, 25 Jun 2007 14:50:55 +0000 (16:50 +0200)]
ppc4xx: Fix O=buildir builds
This patch fixes the problem to assemble cpu/ppc4xx/start.S
experienced last week where building failed having specified
O=../build.sequoia.
Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
Stefan Roese [Mon, 25 Jun 2007 13:57:39 +0000 (15:57 +0200)]
ppc4xx: Add pci_pre_init() for 405 boards
This patch removes the CFG_PCI_PRE_INIT option completely, since
it's not needed anymore with the patch from Matthias Fuchs with
the "weak" pci_pre_init() implementation.
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Sun, 24 Jun 2007 15:41:21 +0000 (17:41 +0200)]
ppc4xx: Maintenance patch for esd's CPCI405 derivats
-add pci_pre_init() for pci interrupt fixup code
-disable phy sleep mode via reset_phy() function
-use correct io accessors
-cleanup
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Sun, 24 Jun 2007 15:23:41 +0000 (17:23 +0200)]
ppc4xx: Add pci_pre_init() for 405 boards
This patch adds support for calling a plattform dependant
pci_pre_init() function for 405 boards. This can be used to
move the current pci_405gp_fixup_irq() function into the
board code.
This patch also makes the CFG_PCI_PRE_INIT define obsolete.
A default function with 'weak' attribute is used when
a board specific pci_pre_init() is not implemented.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Wolfgang Denk [Fri, 22 Jun 2007 21:59:00 +0000 (23:59 +0200)]
Coding stylke cleanup; rebuild CHANGELOG
Igor Lisitsin [Wed, 18 Apr 2007 10:55:19 +0000 (14:55 +0400)]
Adapt log buffer code to support Linux 2.6
A new environment variable, "logversion", selects the log buffer
behaviour. If it is not set or set to a value other than 2, then the
old, Linux 2.4.4, behaviour is selected.
Signed-off-by: Igor Lisitsin <igor@emcraft.com>
--
Igor Lisitsin [Wed, 28 Mar 2007 15:06:19 +0000 (19:06 +0400)]
Extend POST support for PPC440
Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
Signed-off-by: Igor Lisitsin <igor@emcraft.com>
--
Stefan Roese [Fri, 22 Jun 2007 14:58:40 +0000 (16:58 +0200)]
ppc4xx: Fix problem with extended program_tlb() funtion
The recently extended program_tlb() function had a problem when
multiple TLB's had to be setup (for example with 512MB of SDRAM). The
virtual address was not incremented. This patch fixes this issue
and is tested on Katmai with 512MB SDRAM.
Signed-off-by: Stefan Roese <sr@denx.de>
Rafal Jaworowski [Fri, 22 Jun 2007 12:58:04 +0000 (14:58 +0200)]
[ppc] Fix build breakage for all non-4xx PowerPC variants.
- adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
- minor 4xx cleanup
Wolfgang Denk [Wed, 20 Jun 2007 16:14:24 +0000 (18:14 +0200)]
Coding style cleanup. Refresh CHANGELOG.
Stefan Roese [Wed, 20 Jun 2007 06:23:42 +0000 (08:23 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Stefan Roese [Tue, 19 Jun 2007 15:22:44 +0000 (17:22 +0200)]
ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
This patch adds a board command to configure the I2C bootstrap EEPROM
values. Right now 533 and 667MHz are supported for booting either via NOR
or NAND FLASH. Here the usage:
=> bootstrap 533 nor ;to configure the board for 533MHz NOR booting
=> bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 19 Jun 2007 14:42:31 +0000 (16:42 +0200)]
[ppc4xx] Fix problem with NAND booting on AMCC Acadia
The latest changes showed a problem with the location of the NAND-SPL
image in the OCM and the init-data area (incl. cache). This patch
fixes this problem.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 19 Jun 2007 14:40:58 +0000 (16:40 +0200)]
[ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Mon, 18 Jun 2007 19:38:46 +0000 (21:38 +0200)]
Merge with /home/wd/git/u-boot/master
Stefan Roese [Fri, 15 Jun 2007 09:33:41 +0000 (11:33 +0200)]
[ppc4xx] Change lwmon5 port to work with recent 440 exception rework
Now CONFIG_440 has to be defined in all PPC440 board config files.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 15 Jun 2007 09:20:13 +0000 (11:20 +0200)]
Merge ... /home/stefan/git/u-boot/denx-440-exceptions
Grzegorz Bernacki [Fri, 15 Jun 2007 09:19:28 +0000 (11:19 +0200)]
ppc4xx: Clean up 440 exceptions handling
- Introduced dedicated switches for building 440 and 405 images required
for 440-specific machine instructions like 'rfmci' etc.
- Exception vectors moved to the proper location (_start moved away from
the critical exception handler space, which it occupied)
- CriticalInput now serviced (with default handler)
- MachineCheck properly serviced (added a dedicated handler and return
subroutine)
- Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
unhandled and those not relevant for 4xx were eliminated)
- Eliminated Linux leftovers, removed dead code
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 15 Jun 2007 06:18:01 +0000 (08:18 +0200)]
[ppc4xx] Add initial lwmon5 board support
This patch adds initial support for the Liebherr lwmon5 board euqipped
with an AMCC 440EPx PowerPC.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 15 Jun 2007 05:39:43 +0000 (07:39 +0200)]
[ppc4xx] Extend 44x GPIO setup with default output state
The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
is extended with the default GPIO output state (level).
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 14 Jun 2007 09:14:32 +0000 (11:14 +0200)]
[ppc4xx] Extend program_tlb() with virtual & physical addresses
Now program_tlb() allows to program a TLB (or multiple) with
different virtual and physical addresses. With this change, now one
physical region (e.g. SDRAM) can be mapped 2 times, once with caches
diabled and once with caches enabled.
Signed-off-by: Stefan Roese <sr@denx.de>
Detlev Zundel [Wed, 23 May 2007 17:02:41 +0000 (19:02 +0200)]
Change 'repeatable' attribute of some commands to sensible values.
Most prominently this changes 'erase' to be non-repeatable.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Detlev Zundel [Wed, 23 May 2007 16:47:48 +0000 (18:47 +0200)]
Fix 'run' not to continue after interrupted command
Signed-off-by: Detlev Zundel <dzu@denx.de>
Bartlomiej Sieka [Fri, 8 Jun 2007 12:52:22 +0000 (14:52 +0200)]
TQM5200: Add Flat Device Tree support, update default env. accordingly.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Wolfgang Denk [Fri, 8 Jun 2007 08:24:58 +0000 (10:24 +0200)]
Fix config problems on SC3 board; make ide_reset_timeout work.
Benoît Monin [Fri, 8 Jun 2007 07:55:24 +0000 (09:55 +0200)]
[PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
Set the correct value in GPIOx_TCR when configuring the gpio
with CFG_440_GPIO_TABLE.
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Wed, 6 Jun 2007 14:26:56 +0000 (16:26 +0200)]
Coding Style cleanup; generate new CHANGELOG file.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 6 Jun 2007 14:21:11 +0000 (16:21 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc86xx
Wolfgang Denk [Wed, 6 Jun 2007 14:18:01 +0000 (16:18 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-arm
Stefan Roese [Wed, 6 Jun 2007 09:43:58 +0000 (11:43 +0200)]
Merge ... /home/stefan/git/u-boot/acadia-nand-boot
Stefan Roese [Wed, 6 Jun 2007 09:42:13 +0000 (11:42 +0200)]
ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
This patch adds NAND booting support for the AMCC Acadia eval board.
Please make sure to configure jumper J7 to position 2-3 when booting
from NOR, and to position 1-2 when booting for NAND.
I also added a board command to configure the I2C bootstrap EEPROM
values. Right now only 267MHz is support for booting either via NOR
or NAND FLASH. Here the usage:
=> bootstrap 267 nor ;to configure the board for 267MHz NOR booting
=> bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Loeliger [Tue, 5 Jun 2007 18:29:00 +0000 (13:29 -0500)]
Merge branch 'mpc8641'
Ed Swarthout [Tue, 5 Jun 2007 17:30:52 +0000 (12:30 -0500)]
mpc8641 image size cleanup
e600 does not have a bootpg restriction.
Move the version string to beginning of image at
fff00000.
Resetvec.S is not needed.
Update flash copy instructions.
Add tftpflash env variable
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk [Mon, 4 Jun 2007 20:59:44 +0000 (22:59 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Benoît Monin [Mon, 4 Jun 2007 06:36:05 +0000 (08:36 +0200)]
[PATCH] Fix ppc4xx bootstrap letter displayed on startup
The attached patch is mainly cosmetic, allowing u-boot to
display the correct bootstrap option letter according to the
datasheets.
The original patch was extended with 405EZ support by Stefan
Roese.
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 14:18:17 +0000 (16:18 +0200)]
ppc4xx: Add missing file for Bamboo NAND booting support
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 14:15:34 +0000 (16:15 +0200)]
Merge with /home/stefan/git/u-boot/bamboo-nand
Stefan Roese [Fri, 1 Jun 2007 13:58:19 +0000 (15:58 +0200)]
ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
This patch undoes the patch by Jeff Mann with commit-id
ada4697d. As
suggested by AMCC it is not recommended to dynamically change the EBC
speed after bootup. So we undo this change to be on the safe side.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:29:04 +0000 (15:29 +0200)]
ppc4xx: Update Sequoia NAND booting support with ECC
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:27:11 +0000 (15:27 +0200)]
ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
This patch adds NAND booting support for the AMCC Bamboo eval board.
Since the NAND-SPL boot image is limited to 4kbytes, this version
only supports the onboard 64MBytes of DDR. The DIMM modules can't be
supported, since the setup code for I2C DIMM autodetection and
configuration is too big for this NAND bootloader.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:23:04 +0000 (15:23 +0200)]
NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
The U-Boot NAND booting support is now extended to support ECC
upon loading of the NAND U-Boot image.
Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:19:29 +0000 (15:19 +0200)]
ppc4xx: Prepare Bamboo port for NAND booting support
This patch updates the "normal" Bamboo NOR booting port, so
that it is compatible with the coming soon NAND booting
Bamboo port.
It also enables the 2nd NAND flash on the Bamboo.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:16:58 +0000 (15:16 +0200)]
ppc4xx: Update in_be32() functions and friends to latest Linux version
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:15:12 +0000 (15:15 +0200)]
NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
This patch adds hardware ECC support to the NDFC driver. It also
changes the register access from using the "simple" in32/out32
functions to the in_be32/out_be32 functions, which make sure
that the access is correctly synced. This is the only recommended
access to SoC registers in the current Linux kernel.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:12:15 +0000 (15:12 +0200)]
NAND: Update nand_ecc.c to latest Linux version
This patch updates the nand_ecc code to the latest Linux version.
The main reason for this is the more compact code. This makes
it possible to include the ECC code into the NAND bootloader
image (NAND_SPL) for PPC4xx.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:09:50 +0000 (15:09 +0200)]
ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 11:45:24 +0000 (13:45 +0200)]
ppc4xx: Change Luan config file to support ECC
With the updated 44x DDR2 driver the Luan board now supports
ECC generation and checking.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 11:45:00 +0000 (13:45 +0200)]
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
Add config option for 180 degree advance clock control as needed
for the AMCC Luan eval board.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Thu, 31 May 2007 15:21:22 +0000 (17:21 +0200)]
Merge with /home/wd/git/u-boot/stx-gp3ssa
Wolfgang Denk [Thu, 31 May 2007 15:20:09 +0000 (17:20 +0200)]
Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
Signed-off-by: Wolfgang Denk <wd@denx.de>
projects / oweals / u-boot.git / log