Add a note about Nagle's algorithm on the SSL_connect man page

Fixes #4237

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6143)

Fix memory leaks in CA related functions.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4700)

Fix regression with session cache use by clients

Commit d316cdcf6d8d6934663278145fe0a8191e14a8c5 introduced some extra
checks into the session-cache update procedure, intended to prevent
the caching of sessions whose resumption would lead to a handshake
failure, since if the server is authenticating the client, there needs to
be an application-set "session id context" to match up to the authentication
context.  While that change is effective for its stated purpose, there
was also some collatoral damage introduced along with the fix -- clients
that set SSL_VERIFY_PEER are not expected to set an sid_ctx, and so
their usage of session caching was erroneously denied.

Fix the scope of the original commit by limiting it to only acting
when the SSL is a server SSL.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5967)

Improve error handling in rand_init function

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6124)

Add getter for X509_VERIFY_PARAM_get_hostflags

Fixes #5061

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6139)

Clarify BN_mod_exp docs

Specifically this is not supported with an even modulus and
BN_FLG_CONSTTIME.

Fixes #5082

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6137)

Fix some errors and missing info in the CMS docs

Fixes #5063

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6134)

Prepare for 1.1.1-pre7-dev

Reviewed-by: Rich Salz <rsalz@openssl.org>

Prepare for 1.1.1-pre6 release

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update copyright year

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6145)

Use the config file from the source not the host for the tests

Fixes: #6046

Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #6125

Configurations/unix-Makefile.tmpl: harmonize with no-engine.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6106)

Configurations/10-main.conf: force no-engine on ios targets.

Rationale for enforcing no-engine is because of disconnect between
compile-time config and run-time, which is a per-application sandbox
directory which one can't predict in advance. Besides, none of the
bundled engines actually give an edge on iOS...

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6106)

Don't cleanup uninitialized thread local slots

Fixes: #6120

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6123)

Fix drbg thread cleanup and error handling

Fixes: #6081

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6089)

Update version docs

Make it clear that you should not attempt to get the version before the
first handshake is complete.

Fixes #2893

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6013)

apps/s_server.c: Avoid unused variable due to 'no-dtls'

Fixes #6098

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6104)

fix: BN_swap mishandles flags

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6099)

Fix mixed indentation (and other whitespace issues)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6094)

15-test_out_option: Refactor and don't test directory write on VMS

To my surprise, it turns out that on OpenVMS, opening './' (which
is translated to '[]') for writing actually creates a file, '[].'.
On OpenVMS, this is a perfectly valid file with no name or extension,
just the delimiter between the two.

Because of the mess the exception would generate in the test recipe,
it gets refactored again, to clearly separate each test inside it,
and use skips to avoid some of them (that makes it clear that they are
skipped and why, when running the recipe).

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6100)

Fix last(?) batch of malloc-NULL places

Add a script to find them in the future

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6103)

Fix memleaks in async api

Fixes: #5950

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6038)

Wait max. 60 seconds for s_client to connect

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5964)

Add missing error code when alloc-return-null

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6085)

Update the *use_certificate* docs

Note that calling the *use_certificate* functions will replace any existing
certificate of the same type. The same thing applies for private keys.

Fixes #2147

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6092)

Fix typo in the definition of tls13_ciphers

SSL_kANY, and SSL_aANY were placed in the wrong fields. It makes no
functional difference since these macros evaluate to 0 anyway, which is
the correct value for these fields.

Fixes #6048

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6095)

Use  get_last_sys_error() instead of get_last_rtl_error()

get_last_sys_error() already exists, so there's no need for yet
another macro that fulfills the same purpose.

Fixes #4120

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6088)

PEM_def_callback(): use same parameter names as for pem_password_cb

Add a bit more commentary to explain what's going on.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6080)

PEM_def_callback(): don't loop because of too short password given

That error is already caught by EVP_read_pw_string_min, and causes
this function to return -1, so the code detecting too short passwords
in this function is practically dead.

Fixes #5465

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6080)

openssl rehash: exit 0 on warnings, same as c_rehash

Fixes #6083

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6084)

ms/uplink-x86.pl: close the file handle that was opened

Fixes #5656

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6079)

Fix documentation for the -showcerts s_client option

This option shows the certificates as sent by the server. It is not the
full verified chain.

Fixes #4933

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6067)

apps/opt.c: Remove the access checks of input and output files

open() will take care of the checks anyway

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)

Better check of return values from app_isdir and app_access

[extended tests]

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)

Revert "Check directory is able to create files for various -out option"

This reverts commit 555c94a0db9661428da0a45cb32b9f002324eefd.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)

Revert "Add VMS version of app_dirname()"

This reverts commit 215a6730f1eaf53b01a4eb10d75bd09fd74f70cc.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)

Revert "Check on VMS as well"

This reverts commit f6d765988f37c43edb1056ab83165f2569182e9d.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)

test/recipes/15-test_out_option.t: refine tests

Test writing to the null device.  This should be successful.

Also, refactor so the planned number of tests is calculated.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)

[SM2_sign] add minimal EVP_PKEY functionality testing

The actual functionality of generating signatures through the `EVP_PKEY`
API is completely untested.
Current tests under the `EVP_PKEY` API
(`test/recipes/30-test_evp_data/evppkey.txt`) only cover `Verify` and
`Decrypt`, while encryption and signature generation are tested with
ad-hoc clients (`test/sm2crypttest.c`, `test/sm2signtest.c`) that do not
call the `EVP_PKEY` interface at all but soon-to-be private functions
that bypass it (cf. PR#5895 ).

It is my opinion that an ideal solution for the future would consist on
enhancing the `test/evp_pkey` facility and syntax to allow tests to take
control of the PRNG to inject known nonces and validate the results of
`EVP_PKEY` implementations against deterministic known answer tests, but
it is probably too late to work on this feature in time for next release.

Given that commit b5a85f70d8 highlights some critical bugs in the hook
between the `EVP_PKEY` interface and SM2 signature generation and that
these defects escaped testing and code review, I think that at least for
now it is beneficial to at least add the kind of "bogus" testing
provided by this patch:
this is a "fake" test as it does only verify that the SM2 `EVP_PKEY`
interface is capable of creating a signature without failing, but it
does not say anything about the generated signature being valid, nor
does it test the functional correctness of the cryptosystem.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6066)

[SM2_sign] fix double free and return value

Currently, critical bugs prevent using SM2 signatures through the
`EVP_PKEY` interface: any application that managed to satisfy the
requirement of forcing SM3 as the message digest – even if this is
currently not possible transparently through the `EVP_PKEY` interface
and requires manually forcing the MD selection – would crash with a
segmentation fault upon calling the `SM2_sign()` function.

This is easily verified using the OpenSSL CLI to execute this critical
code path under the right conditions:
`openssl dgst -sm3 -hex -sign sm2.eckey /path/to/file/to/sign`

The issue is caused by a double free at the end of `SM2_sign()` in
`crypto/sm2/sm2_sign.c` in case of successful signature generation.
In addition, even if the double free was not causing segfaults,
the function returns the wrong return value in case of success (it
would return 0 rather than 1).

This patch fixes both problems.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6066)

Fix the MAX_CURVELIST definition

The MAX_CURVELIST macro defines the total number of in-built SSL/TLS curves
that we support. However it has not been updated as new curves are added.

Fixes #5232

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6065)

Add missing malloc-return-null instance

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6071)

x509/by_dir.c: Remove dead code

Noticed in #5837

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6064)

Add a test to verify the ClientHello version is the same in a reneg

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6059)

In a reneg use the same client_version we used last time

In 1.0.2 and below we always send the same client_version in a reneg
ClientHello that we sent the first time around, regardless of what
version eventually gets negotiated. According to a comment in
statem_clnt.c this is a workaround for some buggy servers that choked if
we changed the version used in the RSA encrypted premaster secret.

In 1.1.0+ this behaviour no longer occurs. This restores the original
behaviour.

Fixes #1651

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6059)

Don't build AFALG on android

This didn't get built anyway for gcc because it was detected as a cross
compile. But it did get built for clang - even though this is still a cross
compile build. This disables it in all cases for Android.

Fixes #5748

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6057)

Allow TLSv1.3 EC certs to use compressed points

The spec does not prohib certs form using compressed points. It only
requires that points in a key share are uncompressed. It says nothing
about point compression for certs, so we should not fail if a cert uses a
compressed point.

Fixes #5743

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6055)

Document when a session gets removed from cache

Document the fact that if a session is not closed down cleanly then the
session gets removed from the cache and marked as non-resumable.

Fixes #4720

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6053)

Remove some logically dead code

This dead code should have been removed as part of #5874 but got missed.

Found by Coverity.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6049)

Improve backwards compat with 1.0.2 for ECDHParameters

In 1.0.2 you could configure automatic ecdh params by using the
ECDHParameters config directive and setting it to the value
"+Automatic" or just "Automatic". This is no longer required in 1.1.0+
but we still recognise the "+Automatic" keyword for backwards compatibility.
However we did not recognise just "Automatic" without the leading "+" which
is equally valid. This commit fixes that omission.

Fixes #4113

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6035)

X509: add more error codes on malloc or sk_TYP_push failure

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5837)

a_strex.c: improve documentation of 'tag2nbyte' lookup table

The 'tag2nbyte' lookup table maps the tags of ASN1 string types
to their respective character widths. It is used for example by
ASN1_STRING_to_UTF8(). This commit adds the tag names as comments.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6062)

Remove superfluous NULL checks. Add Andy's BN_FLG comment.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6009)

Move up check for EC_R_INCOMPATIBLE_OBJECTS and for the point at infinity case

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6009)

Pass through

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6009)

ladder description: why it works

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6009)

Address code style comments

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6009)

Elliptic curve scalar multiplication with timing attack defenses

Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Co-authored-by: Cesar Pereida Garcia <cesar.pereidagarcia@tut.fi>
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6009)

Fix usage of ossl_assert()

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #6044

ARM assembly pack: make it work with older assembler.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6043)

00-base-templates.conf: wire keccak1600-armv4 module.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

sha/asm/keccak1600-armv4.pl: adapt for multi-platform.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

00-base-templates.conf: wire keccak1600-ppc64 module.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

00-base-templates.conf: wire keccak1600-s390x module.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

00-base-templates.conf: wire keccak1600-armv8 module.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

00-base-templates.conf: wire keccak1600-x86_64 module.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

sha/asm/keccak1600-x86_64.pl: make it work on Windows.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

Configure: add $target{keccak1600_asm_src}.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6042)

sha/asm/keccak1600-armv8.pl: halve the size of hw-assisted subroutine.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

.travis.yml: switch to newer osx image.

Default osx image runs Mac OS X 10.12, which apparently suffers from
infrequent socket failures affecting some tests. Later image runs
10.13...

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5986)

Fix openssl ca, to correctly make output file binary when using -spkac

On Unix, this doesn't matter, but on other platforms, it may.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6050)

Fix late opening of output file

For 'openssl dhparams', the output file was opened after calculations
were made, which is a waste of cycles and time if the output file
turns out not to be writable.

Fixes #3404

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6051)

Add support for getrandom() or equivalent system calls and use them by default

Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #5910

Fix building linux-armv4 with --strict-warnings

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6026)

Ensure the thread keys are always allocated in the same order

Fixes: #5899

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5911)

openssl/err.h: remove duplicate OSSL_STOREerr()

Two definitions in lines 127 and 136, introduced in 71a5516dcc8.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6029)

openssl/ssl.h: restore some renamed public SSL_CTRL defines

Fixes #6022

In commit de4d764e3271, the following SSL_CTRL #define's where renamed

    SSL_CTRL_GET_CURVES        ->  SSL_CTRL_GET_GROUPS
    SSL_CTRL_SET_CURVES        ->  SSL_CTRL_SET_GROUPS
    SSL_CTRL_SET_CURVES_LIST   ->  SSL_CTRL_SET_GROUPS_LIST
    SSL_CTRL_GET_SHARED_CURVE  ->  SSL_CTRL_GET_SHARED_GROUP

The corresponding function-like macros (e.g, SSL_get1_curves(ctx, s)) were
renamed, too, and compatibility #define's were added. This was overlooked for
the above constants. Since the constants are part of the public interface,
they must not be removed for a minor release.

As a consequence the Qt5 configure check (and the build) fails.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6023)

Add a test for SSL_pending()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6020)

Fix SSL_pending() for DTLS

DTLS was not correctly returning the number of pending bytes left in
a call to SSL_pending(). This makes the detection of truncated packets
almost impossible.

Fixes #5478

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6020)

Test the state of SSL_in_init() from the info_callback

Check that in a handshake done event SSL_in_init() is 0 (see #4574)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6019)

Make sure SSL_in_init() returns 0 at SSL_CB_HANDSHAKE_DONE

In 1.1.0 and before calling SSL_in_init() from the info_callback
at SSL_CB_HANDSHAKE_DONE would return 0. This commit fixes it so
that it does again for 1.1.1. This broke Node.

Fixes #4574

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6019)

Document supported digest functions

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6024)

Enable all implemented digests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6025)

Clear buffer in PEM_write_bio

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5814)

Reflect special `DEFAULT` behavior in ciphers(1)

Actual behavior of DEFAULT is different than currently described.
Rather than actinf as cipher string, DEFAULT cannot be combined using
logical operators, etc.

Fixes #5420.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5428)

Don't distribute team internal config targets

Configurations/90-team.conf isn't for public consumption, so we rename
it to 90-team.norelease.conf and make sure 'make dist' and 'make tar'
don't include it in the tarball.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5836)

correct spelling errors detected by Debian lintian

CLA: trivial

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5801)

Add a test for a NULL X509_STORE in X509_STORE_CTX_init

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6001)

Don't crash if there are no trusted certs

The X509_STORE_CTX_init() docs explicitly allow a NULL parameter for the
X509_STORE. Therefore we shouldn't crash if we subsequently call
X509_verify_cert() and no X509_STORE has been set.

Fixes #2462

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6001)

Fix ocsp app exit code

If we run the ocsp command line app and the responder returns a
non-successful status code then the app should exit with a failure code.

Based on an original patch by Tatsuhiro Tsujikawa.

Fixes #2387

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5998)

Fix no-ec

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5997)

Correct an ommission in the EVP_DigestSignInit docs

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5996)

Add missing index_index() when reloading OCSP responder

Also, future-proof index_index() return codes by requiring success
to return a positive value.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Clarify the configuration module in config.pod

Similar to 0652e8a7 ("Clarify default section in config.pod",
2018-04-12), reword a sentence to make it easier to parse.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5794)

apps/s_socket.c: fix memory sanitizer problem in ACCEPT printout.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5994)

TLSProxy/Proxy.pm: preclude output intermix.

s_server -rev emits info output on stderr, i.e. unbufferred, which
risks intermixing with output from TLSProxy itself on non-line
boundaries, which in turn is confusing to TAP parser.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)

recipes/70-test_ssl{cbcpadding,extension,records}: make it work w/fragmentation.

This fixes only those tests that were failing when network data was
fragmented. Remaining ones might succeed for "wrong reasons". Bunch
of tests have to fail to be considered successful and when data is
fragmented they might fail for reasons other than originally intended.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)

TLSProxy/Record.pm: add is_fatal_alert method.

(resolve uninitialized variable warning and harmonize output).

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)

TLSProxy/Proxy.pm: refine NewSessionTicket detection.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)

TLSProxy/Message.pm: refine end-of-conversation detection logic.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)