schlock global variable needs to be volatile

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4000)

(cherry picked from commit e0de4dd5a2b0c0dc27e6a6ab01fabe374d657d23)

evp/e_aes_cbc_hmac_sha256.c: give SHAEXT right priority.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/3898)

(cherry picked from commit d0f6eb1d8c84165c383a677266cfae9c0b162781)

Fix RSA-PSS in FIPS mode by switching digest implementations.

Fixes #2718

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3996)

Fix apps/s_client.c's XMPP client

When an error occurs during the starttls handskake, s_client gets stuck
looping around zero bytes reads, because the server won't sent anything more
after its error tag.  Shutting down on the first zero byte read fixes this.

Fixes #3980

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3981)

Remove some dead code

The intention of the removed code was to check if the previous operation
carried. However this does not work. The "mask" value always ends up being
a constant and is all ones - thus it has no effect. This check is no longer
required because of the previous commit.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3832)

(cherry picked from commit d5475e319575a45b20f560bdfae56cbfb165cb01)

Fix undefined behaviour in e_aes_cbc_hmac_sha256.c and e_aes_cbc_hmac_sha1.c

In TLS mode of operation the padding value "pad" is obtained along with the
maximum possible padding value "maxpad". If pad > maxpad then the data is
invalid. However we must continue anyway because this is constant time code.

We calculate the payload length like this:

    inp_len = len - (SHA_DIGEST_LENGTH + pad + 1);

However if pad is invalid then inp_len ends up -ve (actually large +ve
because it is a size_t).

Later we do this:

    /* verify HMAC */
    out += inp_len;
    len -= inp_len;

This ends up with "out" pointing before the buffer which is undefined
behaviour. Next we calculate "p" like this:

    unsigned char *p =
        out + len - 1 - maxpad - SHA256_DIGEST_LENGTH;

Because of the "out + len" term the -ve inp_len value is cancelled out
so "p" points to valid memory (although technically the pointer arithmetic
is undefined behaviour again).

We only ever then dereference "p" and never "out" directly so there is
never an invalid read based on the bad pointer - so there is no security
issue.

This commit fixes the undefined behaviour by ensuring we use maxpad in
place of pad, if the supplied pad is invalid.

With thanks to Brian Carpenter for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3832)

(cherry picked from commit 335d0a4646981c9d96b62811bcfd69a96a1a67d9)

RSA_padding_check_PKCS1_type_2 is not constant time.

This is an inherent weakness of the padding mode. We can't make the
implementation constant time (see the comments in rsa_pk1.c), so add a
warning to the docs.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Backport of 5b8fa43 and remove resolved TODO: see PR#3924.
Make RSA key exchange code actually constant-time.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3935)

fix copy and copy-if-different whitespace problem

From https://github.com/openssl/openssl/pull/1023

CLA: trivial

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3904)

Avoid possible memleak in X509_policy_check()

When tree_calculate_user_set() fails, a jump to error failed to
deallocate a possibly allocated |auth_nodes|.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3851)

Fix a memleak in X509_PKEY_new.
Fixes #3349

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3819)

Undo one UI fix

Undoing:
> - in UI_process(), |state| was never made NULL, which means an error
>   when closing the session wouldn't be accurately reported.

This was a faulty cherry-pick from master

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3853)

Fix small UI issues

- in EVP_read_pw_string_min(), the return value from UI_add_* wasn't
  properly checked
- in UI_process(), |state| was never made NULL, which means an error
  when closing the session wouldn't be accurately reported.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3849)

(cherry picked from commit b96dba9e5ec7afc355be1eab915f69c8c0d51741)

Add echo for each build phase

Port of GH#3842 to 1.0.2

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3845)

Fix a memleak in ec_GFp_mont_group_set_curve.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3828)

Fix a memory leak in ecdh/ecdsa_check.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3825)

tsget: remove call of WWW::Curl::Easy::global_cleanup

This function is undocumented, but similarly named functions (such as
'curl_global_cleanup') are documented as internals that should not be
called by scripts.

Fixes #3765

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3769)

Remove inadvertently commited test binaries

Commit 201015ee4f38e5d216a7625282c6b8a395b680b7 added some generated
files that were not part of the intended functionality; remove them.
(Only the 1.0.2 branch version of the commit was affected, probably due
to a smaller .gitignore on that branch.)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3729)

Add documentation for the SSL_export_keying_material() function

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3738)

Remove a pointless "#if 0" block from BN_mul.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3683)

(cherry picked from commit 93a8b3ba793c769a3634e56642dac55a8d44023f)

Fix a possible crash in dsa_builtin_paramgen2.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3675)
(cherry picked from commit fb0a64126b8c11a6961dfa1323c3602b591af7df)

Fix possible crash in X931 code.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3675)
(cherry picked from commit 5419dadd4bd1f7abbfa23326ca766d2c143f257c)

Remove the fallback from ERR_get_state because the
return value is now checked at the callers.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3678)

Fix a possible crash in the error handling.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3672)

(cherry picked from commit 4fc426b78964b3d234cb7b1b6112c9b80e16a13a)

Remove needless type casting.

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3627)

(cherry picked from commit a020f54c25985fc83e809daa15a3920731d39612)

Fix possible usage of NULL pointers in apps/spkac.c

Check return value of NETSCAPE_SPKI_new() and
NETSCAPE_SPKI_b64_encode(), and also clean up coding style incidentally.

Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3647)
(cherry picked from commit f2582f08d5167ee84b7b313fd1435fe91ee44880)

Fix speed command for alternation of ciphers and digests.

CLA: trivial

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3487)

(cherry picked from commit 9ae4e664da0692f27bfe0d1a34db29ed815203c8)

Remove stale note from s_server.pod

Modern browsers are now, well, pretty modern.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3644)
(cherry picked from commit 36c438514db71eba3e8062fef7869b9211630a19)

Fix a read off the end of the input buffer

when building with OPENSSL_SMALL_FOOTPRINT defined.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3533)

(cherry picked from commit 0b20ad127ce86b05a854f31d51d91312c86ccc74)

Document default client -psk_identity

Document that -psk is required to use PSK cipher

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3607)
(cherry picked from commit 9d772829c9e4f202460acb43f9e073841a7cb9db)

(cherry picked from commit c1abfde735eca6346eb2c0641b67b11d0e68b94c)

ec/asm/ecp_nistz256-x86_64.pl: minor sqr_montx cleanup.

Drop some redundant instructions in reduction in ecp_nistz256_sqr_montx.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8fc063dcc9668589fd95533d25932396d60987f9)

Add text pointing to full change list.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3606)
(cherry picked from commit 01dfaa08b1960049f91485f2e5eec6c6bd03db39)

Fix ex_data memory leak

Code was added in commit 62f488d that overwrite the last ex_data valye
using CRYPTO_dup_ex_data() causing a memory leak and potentially
confusing the ex_data dup() callback.

In ssl_session_dup(), new-up the ex_data before calling
CRYPTO_dup_ex_data(); all the other structures that dup ex_data have
the destination ex_data new'd before the dup.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3568)

Fix srp app missing NULL termination with password callback

The password_callback() function does not necessarily NULL terminate
the password buffer, the caller must use the returned length but the
srp app uses this function as if it was doing NULL termination.

This made the -passin and -passout options of "openssl srp"
fail inexpicably and randomly or even crash.

Fixed by enlarging the buffer by one, so that the maximum password length
remains unchanged, and adding NULL termination upon return.

[Rearrange code for coding style compliance in process.]

This backport of 0e83981d61fc435f42d4bb4d774272b69556b7bc.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3579)

Send a protocol version alert

If we fail to negotiate a version then we should send a protocol version
alert.

Fixes #3595

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3598)

Fix inconsistent check of UNSAFE_LEGACY_RENEGOTIATION (1.0.2)

The check for SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION is
inconsistent. Most places check SSL->options, one place is checking
SSL_CTX->options; fix that.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
GH: #3521

Document that HMAC() with a NULL md is not thread safe

Fixes #3541

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3555)

Prepare for 1.0.2m-dev

Reviewed-by: Stephen Henson <steve@openssl.org>

Prepare for 1.0.2l release

Reviewed-by: Stephen Henson <steve@openssl.org>

make update

Reviewed-by: Stephen Henson <steve@openssl.org>

Update CHANGES and NEWS for new release

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3548)

Ignore -rle and -comp when compiled with OPENSSL_NO_COMP.
Fixes make test when configured with no-comp.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3545)

Fix regression in openssl req -x509 behaviour.

Allow conversion of existing requests to certificates again.
Fixes the issue #3396

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3485)

Remove notification settings from appveyor.yml

Notifications can be (and should be) configured on account basis on
the CI web site.  This avoids getting emails to openssl-commits for
personal accounts that also build OpenSSL stuff.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3484)
(cherry picked from commit 7a94f5b0f7c878b1056a08f659ce23aa97bfa3ad)

Remove dead code.

The second BN_is_zero test can never be true.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3434)
(cherry picked from commit 3f97052392cb10fca5309212bf720685262ad4a6)

Copy custom extension flags in a call to SSL_set_SSL_CTX()

The function SSL_set_SSL_CTX() can be used to swap the SSL_CTX used for
a connection as part of an SNI callback. One result of this is that the
s->cert structure is replaced. However this structure contains information
about any custom extensions that have been loaded. In particular flags are
set indicating whether a particular extension has been received in the
ClientHello. By replacing the s->cert structure we lose the custom
extension flag values, and it appears as if a client has not sent those
extensions.

SSL_set_SSL_CTX() should copy any flags for custom extensions that appear
in both the old and the new cert structure.

Fixes #2180

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3427)

perlasm/x86_64-xlate.pl: work around problem with hex constants in masm.

Perl, multiple versions, for some reason occasionally takes issue with
letter b[?] in ox([0-9a-f]+) regex. As result some constants, such as
0xb1 came out wrong when generating code for MASM. Fixes GH#3241.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3385)

(cherry picked from commit c47aea8af1e28e46e1ad5e2e7468b49fec3f4f29)

Fix some error path logic in i2v_AUTHORITY_INFO_ACCESS and i2v_GENERAL_NAME

Fixes #1653 reported by Guido Vranken

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3362)
(cherry picked from commit 75a3e39288feeeefde5ed1f96ff9faeba0d2b233)

RT2867: des_ede3_cfb1 ignored "size in bits" flag

Code by Steve Henson. Backport to 1.0.2 from commit fe2d149119

Fixes #2346

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3364)

Fix URL links in comment

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3365)
(cherry picked from commit dea0eb2c5452cd4c2160a64a6868e79efeca6e9d)

Fix time offset calculation.

ASN1_GENERALIZEDTIME and ASN1_UTCTIME may be specified using offsets,
even though that's not supported within certificates.

To convert the offset time back to GMT, the offsets are supposed to be
subtracted, not added. e.g. 1759-0500 == 2359+0100 == 2259Z.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3335)
(cherry picked from commit ae32742e3db45a19aead2c42e30072882492be1d)

Check fflush on BIO_ctrl call

Bug found and fix suggested by Julian Rüth.
Push error if fflush fails

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3266)
(cherry picked from commit 595b2a42375427a254ad5a8c85870efea839a9b9)
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3348)

Remove unnecessary loop in pkey_rsa_decrypt.

It is not necessary to remove leading zeros here because
RSA_padding_check_PKCS1_OAEP_mgf1 appends them again. As this was not done
in constant time, this might have leaked timing information.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3313)
(cherry picked from commit 237bc6c997e42295eeb32c8c1c709e6e6042b839)

check length sanity before correcting in EVP_CTRL_AEAD_TLS1_AAD

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3276)

Annotate ASN.1 attributes of the jurisdictionCountryName NID

EV Guidelines section 9.2.5 says jurisdictionCountryName follows the
same ASN.1 encoding rules as countryName.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3284)
(cherry picked from commit 52c0c4d13e8220f19eb2b205dc0c30508c4a51a9)

Fixed typo in X509_STORE_CTX_new description

 'X509_XTORE_CTX_cleanup' ->  'X509_STORE_CTX_cleanup'
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3271)
(cherry picked from commit 7643a1723ef8eb4e542e57dfadeeb8eff788ec05)

(cherry picked from commit 2c0b8d2872057fdda22d3f41c3d4e59835b414b4)

Numbers greater than 1 are usually non-negative.

BN_is_prime_fasttest_ex begins by rejecting if a <= 1. Then it goes to
set A := abs(a), but a cannot be negative at this point.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3275)
(cherry picked from commit 8b24f94209676bbe9933affd2879a686b1ed044d)

pkeyutl exit with 0 if the verification succeeded

If exiting non-zero, which not consistent with shell conventions,
the shells/scripts treat the cmd as failed.

CLA: trivial

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3213)

Additional check to handle BAD SSL_write retry

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3122)

crypto/ppccap.c: SIGILL-free processor capabilities detection on MacOS X.

It seems to be problematic to probe processor capabilities with SIGILL
on MacOS X. The problem should be limited to cases when application code
is debugged, but crashes were reported even during normal execution...

[backport of 0bd93bbe4ae60e5f318b298bfe617e468a7b71d0]

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ensure dhparams can handle X9.42 params in DER

dhparams correctly handles X9.42 params in PEM format. However it failed
to correctly processes them when reading/writing DER format.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3112)

Add missing macros for DHxparams

DHparams has d2i_DHparams_fp, d2i_DHxparams_bio etc, but the equivalent
macros for DHxparams were omitted.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3112)

Fix for #2730. Add CRLDP extension to list of supported extensions

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3087)
(cherry picked from commit e6f648fd880369e186039501c960809b17f96e88)

Free the compression methods in s_server and s_client

This causes a minor (64 bytes on my machine) mem leak in s_server/s_client.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3040)

doc: Add stitched ciphers to EVP_EncryptInit.pod

These ciphers don't appear to be documented anywhere. Given the
performance[1] benefits I think it makes sense to expose them.

[1] https://software.intel.com/sites/default/files/open-ssl-performance-paper.pdf

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3067)
(cherry picked from commit 209fac9f8a24000beaa8a438517115b42ca7e7c6)

doc: Add missing options in s_{server,client}

These were added to the help in ad775e04f6dab but not the pods.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3065)
(cherry picked from commit 254b58fd7335fa3c58e2535d46658109ffd8bdcd)

Fix the error handling in CRYPTO_dup_ex_data.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2998)

Add documentation for SNI APIs

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3071)
(cherry picked from commit 8c55c4614731487449a02f90ff9a209ff6c63447)

aes/asm/bsaes-armv7.pl: relax stack alignment requirement.

Even though Apple refers to Procedure Call Standard for ARM Architecture
(AAPCS), they apparently adhere to custom version that doesn't follow
stack alignment constraints in the said standard. [Why or why? If it's
vendor lock-in thing, then it would be like worst spot ever.] And since
bsaes-armv7 relied on standard alignment, it became problematic to
execute the code on iOS.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0822d41b6d54132df96c02cc6f6fa9b179378351)

Fixed a gcc-7-strict-warnings issue.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3026)

Don't access memory before checking the correct length in aesni_cbc_hmac_sha256_ctrl in case EVP_CTRL_AEAD_TLS1_AAD.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3025)

bn/asm/sparcv9-mont.pl: fix squaring code path.

This module is used only with odd input lengths, i.e. not used in normal
PKI cases, on contemporary processors. The problem was "illuminated" by
fuzzing tests.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 120a9e1a825bd0407639bedb1e8e15823cf7a545)

Guard last few debugging printfs in libssl

Fixes #2542

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3018)

aes/asm/aesni-sha*-x86_64.pl: fix IV handling in SHAEXT paths.

Initial IV was disregarded on SHAEXT-capable processors. Amazingly
enough bulk AES128-SHA* talk-to-yourself tests were passing.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2992)

(cherry picked from commit 08d09628d2c9f3ef599399d8cad021a07ab98347)

Fix BAD CCS alert in DTLS

Set the correct variable, and then actually send the alert!

Found by, and fix suggested by, Raja Ashok.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3009)

Fix error paths in ASN1_TIME_to_generalizedtime

We should not write to |out| in error cases, so we should defer doing this
until the "done" block.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3002)

Avoid a mem leak on error

An internal error path could result in a memory leak. Also remove some redundant
code.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3003)

Fix decoding of ASN.1 LONG and ZLONG items

LONG and ZLONG items (which are OpenSSL private special cases of
ASN1_INTEGER) are encoded into DER with padding if the leading octet
has the high bit set, where the padding can be 0x00 (for positive
numbers) or 0xff (for negative ones).

When decoding DER to LONG or ZLONG, the padding wasn't taken in
account at all, which means that if the encoded size with padding
is one byte more than the size of long, decoding fails.  This change
fixes that issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3000)
(cherry picked from commit ca2045dc545ba4afe8abbe29d0316ee3d36da7df)

Fix VC warnings about unary minus to an unsigned type.

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #2230
(partial cherry pick from commit 68d4bcfd0651c7ea5d37ca52abc0d2e6e6b3bd20)

Cast to an unsigned type before negating

llvm's ubsan reported:
runtime error: negation of -9223372036854775808 cannot be represented in type
'long'; cast to an unsigned type to negate this value to itself

Found using afl

Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1325
(cherry picked from commit 1618679ac478c8f41fc5f320fb4d8a33883b3868)

Avoid signed overflow

Found by afl

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #3013
(cherry picked from commit 5bea15ebb359c91a1bb7569620ead14bb71cfb81)

Fixed a crash in print_notice.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2935)
(cherry picked from commit 29d1fad78899e5ae2997b19937a175784b21c996)

Fix a crash or unbounded allocation in RSA_padding_add_PKCS1_PSS_mgf1
and RSA_verify_PKCS1_PSS_mgf1 with 512-bit RSA vs. sha-512.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2881)

(cherry picked from commit e653b6cd74f70c04b0b96b07df00680b427603af)

Better way to recognise mingw64 in config script

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2922)
(cherry picked from commit 41bee3e8fb749504f21f78dbf3eca85e5b84820b)

crypto/x86*cpuid.pl: move extended feature detection.

Exteneded feature flags were not pulled on AMD processors, as result
a number of extensions were effectively masked on Ryzen. Original fix
for x86_64cpuid.pl addressed this problem, but messed up processor
vendor detection. This fix moves extended feature detection past
basic feature detection where it belongs. 32-bit counterpart is
harmonized too.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 1aed5e1ac28790cc915ad03e86e2d5e896a4ea13)

Document in CHANGES that config now recognises 64-bit mingw

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2917)
(cherry picked from commit b1fa4031feb94e1406f3bd2ba0f771e48d0407b5)

(cherry picked from commit e342f396142331aa58187afa441581590bc80af9)

Fix a memory leak in X509_STORE_add_cert/crl error handling.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2837)

Fix DTLSv1_listen() sequence numbers

DTLSv1_listen() is stateless. We never increment the record read sequence
while listening, and we reflect the incoming record's sequence number in our
write sequence.

The logic for doing the write sequence reflection was *after* we had
finished processing the incoming ClientHello and before we write the
ServerHello. In the normal course of events this is fine. However if we
need to write an early alert during ClientHello processing (e.g. no shared
cipher), then we haven't done the write sequence reflection yet. This means
the alert gets written with the wrong sequence number (it will just be set
to whatever value we left it in the last time we wrote something). If the
sequence number is less than expected then the client will believe that the
incoming alert is a retransmit and will therefore drop it, causing the
client to hang waiting for a response from the server.

Fixes #2886

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2915)

Recognise mingw64 in config script

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2914)

Fix out-of-memory condition in conf

conf has the ability to expand variables in config files. Repeatedly doing
this can lead to an exponential increase in the amount of memory required.
This places a limit on the length of a value that can result from an
expansion.

Credit to OSS-Fuzz for finding this problem.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2894)
(cherry picked from commit 8a585601fea1091022034dd14b961c1ecd5916c3)

Revert "Use the callbacks from the SSL object instead of the SSL_CTX object"

This shouldn't have been applied to the 1.0.2 branch.

This reverts commit 5247c0388610bfdcc8f44b777d75ab681120753d.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2907)

Fix UI_get0_action_string()

It shouldn't try to return an action description for UIT_PROMPT type
UI strings.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2904)
(cherry picked from commit 6e470e190853f59a394dc92fefd74666c94266f4)

(cherry picked from commit f31c714e923e76f54ff3b492f646662ef57f7d59)

Use the callbacks from the SSL object instead of the SSL_CTX object

... in functions dealing with the SSL object rather than the context.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2870)

(cherry picked from commit d61461a7525322d188f9c6e3f90cfc93916cc636)

Avoid questionable use of the value of a pointer

that refers to space
deallocated by a call to the free function in tls_decrypt_ticket.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2897)
(cherry picked from commit 13ed1afa923f4ffb553e389de08f26e9ce84e8a2)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2889)

Fix apps/progs.pl to generate correctly formatted progs.h

It was still generating EAY style source.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2889)

Fix crypto/bn/bn_prime.pl to generate correctly formatted bn_prime.h

It was still generating EAY style source.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2889)

Fix some RSA documentation

RSA_private_encrypt(), RSA_public_decrypt(), RSA_public_encrypt() and
RSA_private_decrypt() are declared with a "const" from parameter, but
this is not reflected in the docs.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2899)
(cherry picked from commit b41f6b64f809e5992b9f1b601b3dff1a2129da2d)

Make the output of enc -ciphers identical

even if run several times in a session.

This amounts to moving the column counter so it isn't a function local
static variable and reinitialising it each time.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2884)
(cherry picked from commit 2b305ab02e0977ed71c255cc386ff75c397d7820)

Fix build problem with current 1.0.2 branch.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2883)