Luka Perkov [Sat, 24 Jan 2015 23:08:17 +0000 (23:08 +0000)]
include: drop kernel 3.3.x leftovers
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44119
Felix Fietkau [Sat, 24 Jan 2015 22:45:28 +0000 (22:45 +0000)]
ralink: fix ethernet feature TSO not work
* fix TSO features verify on mt7621 firewrt board
* improve tx clean up. no need to access uncached
memory. also use TX_DTX register instead of
read tx ring DONE bit
* mt7621 need napi weight 64 to get more performance
* remove netif_receive_skb, after kernel version
3.7 tcp4_gro_receive can handle tcp checksum.
on rt2880 use iperf tcp LAN to WAN throughput test.
with gro 135 Mbits/sec. without gro 80.4Mbits/sec.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44118
Felix Fietkau [Sat, 24 Jan 2015 22:45:23 +0000 (22:45 +0000)]
ralink: init tx/rx vlan offload register for mt7621
on mt7621 don't have tx vlan vid registers.
so set FE_REG_FE_DMA_VID_BASE to 0.
set rx vlan offload register to disable.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44117
Felix Fietkau [Sat, 24 Jan 2015 22:45:16 +0000 (22:45 +0000)]
ralink: use fe_max_buf_size to get rx buffer size
the rx_buf_size now is 1534 when mtu is 1500.
the ethernet frame with vlan tag and FCS is 1522.
so the buffer is enough.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44116
Felix Fietkau [Sat, 24 Jan 2015 22:45:10 +0000 (22:45 +0000)]
ramips: fix ethernet vlan tx offload support check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44115
Felix Fietkau [Sat, 24 Jan 2015 22:13:31 +0000 (22:13 +0000)]
kernel: eliminate a few kernel_patchver_*/CompareKernelPatchVer calls
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44114
Felix Fietkau [Sat, 24 Jan 2015 22:13:22 +0000 (22:13 +0000)]
kernel: drop obsolete kernel version checks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44113
Felix Fietkau [Sat, 24 Jan 2015 22:13:17 +0000 (22:13 +0000)]
ep93xx: remove obsolete kernel version check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44112
Felix Fietkau [Sat, 24 Jan 2015 20:02:23 +0000 (20:02 +0000)]
x86: remove linux 3.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44111
Felix Fietkau [Sat, 24 Jan 2015 20:02:09 +0000 (20:02 +0000)]
build: drop obsolete kernel version dependencies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44110
Felix Fietkau [Sat, 24 Jan 2015 20:02:02 +0000 (20:02 +0000)]
kernel: remove linux 3.3 patches and config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44109
Felix Fietkau [Sat, 24 Jan 2015 20:01:45 +0000 (20:01 +0000)]
pxa: mark as broken
It still uses the long obsolete 3.3 kernel version
SVN-Revision: 44108
Felix Fietkau [Sat, 24 Jan 2015 20:01:40 +0000 (20:01 +0000)]
x86: mark the ep80579 subtarget as broken
It still uses the long obsolete 3.3 kernel version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44107
Felix Fietkau [Sat, 24 Jan 2015 20:01:33 +0000 (20:01 +0000)]
mcs814x: remove linux 3.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44106
Felix Fietkau [Sat, 24 Jan 2015 19:42:12 +0000 (19:42 +0000)]
ar8216: prefix mii_xxx functions to avoid kernel namespace pollution
Prefix the exported mii_xxx32 functions with ar8xxx_
to avoid kernel namespace pollution.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44105
Felix Fietkau [Sat, 24 Jan 2015 19:42:06 +0000 (19:42 +0000)]
ar8216: add swconfig attribute to display ARL table on AR8327/AR8337
Add global read-only swconfig attribute "arl_table" to display the
address resolution table.
So far the chip-specific part is implemented for AR8327/AR8337 only
as I don't have the datasheets for the other AR8XXX chips.
Successfully tested on TL-WDR4300 (AR8327rev2)
and TL-WDR4900 (AR8327rev4).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44104
Felix Fietkau [Sat, 24 Jan 2015 19:42:01 +0000 (19:42 +0000)]
ar8216: decrease page switch wait time
Until a few years ago the page switch wait time was set to msleep(1)
what was changed to usleep_range(1000, 2000) later.
I can not imagine that a low-level operation like switching page
on register level takes so much time.
Most likely the value of 1ms was initially set to check whether
it fixes an issue and then remained w/o further checking whether
also a smaller value would be sufficient.
Now the wait time is set to 5us and I successfully tested this on
AR8327. IMHO 5us should be plenty of time for all supported chips.
However I couldn't test this due to missing hardware.
If other chips should need a longer wait time we can add the
wait time as a parameter to the ar8xxx_chip struct.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44103
Felix Fietkau [Sat, 24 Jan 2015 19:41:55 +0000 (19:41 +0000)]
ar8216: add link change detection for switch ports
Check for switch port link changes and
- flush ATU in case of a change
- report link change via syslog
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44102
Felix Fietkau [Sat, 24 Jan 2015 19:41:51 +0000 (19:41 +0000)]
ar8216: fix ATU flushing
The functionality to flush the address translation table contains two bugs
which luckily compensate each other.
1. Just setting the operation is not sufficient to perform the flushing.
The "active" bit needs to be set to actually trigger an action.
For the vtu operations this is implemented correctly.
2. ar8xxx_phy_read_status is called every 2s by the phy state machine
to check for link changes. This would have caused an ATU flush
every 2s.
Fix the chip-specific ATU flush functions and remove the ATU flush call
from ar8xxx_phy_read_status.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44101
Felix Fietkau [Sat, 24 Jan 2015 19:27:22 +0000 (19:27 +0000)]
mac80211/hostapd: fix HT mode setup for RSN ad-hoc networks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44100
Felix Fietkau [Sat, 24 Jan 2015 18:12:09 +0000 (18:12 +0000)]
relayd: prevent start for disabled interfaces
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44099
Felix Fietkau [Sat, 24 Jan 2015 14:16:36 +0000 (14:16 +0000)]
netifd: fix a regression with some VLAN configurations introduced in the last update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44098
Felix Fietkau [Sat, 24 Jan 2015 13:41:10 +0000 (13:41 +0000)]
ppp: on PPPoE, always send PADT when shutting down the connection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44097
Felix Fietkau [Sat, 24 Jan 2015 13:41:04 +0000 (13:41 +0000)]
netifd: do not stop service on shutdown, only call ifdown
Also add a small delay, like on restart
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44096
Jo-Philipp Wich [Sat, 24 Jan 2015 11:30:45 +0000 (11:30 +0000)]
ppp: rework host-uniq support to take hex encoded strings
The previous implementation of the "host-uniq" option used plain strings for
passing the value to pppd which made it impossible to specify binary data.
Switch the format to a hex encoded string to support binary data.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44094
Felix Fietkau [Sat, 24 Jan 2015 00:30:36 +0000 (00:30 +0000)]
netifd: update to the latest version, fixes bridge reload (#18351) and device config issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44093
Jo-Philipp Wich [Fri, 23 Jan 2015 22:19:29 +0000 (22:19 +0000)]
netifd: store additional DHCP lease information
Extend the DHCPv4 handler script to store additional information from the
DHCP lease in the per-interface data object.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44092
Jo-Philipp Wich [Fri, 23 Jan 2015 13:09:54 +0000 (13:09 +0000)]
include, base-files: align default repository url with changed buildbot structure
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44091
Jo-Philipp Wich [Fri, 23 Jan 2015 13:09:50 +0000 (13:09 +0000)]
Revert "version.mk: add "%s" placeholder for dotted target.subtarget notation"
This reverts commit
d388882dccc1b25575939c3713b3ab394c371fd0.
SVN-Revision: 44090
Jo-Philipp Wich [Fri, 23 Jan 2015 13:09:45 +0000 (13:09 +0000)]
Revert "version.mk: explicitely filter "generic" subtarget for "%s" placeholder (#18710)"
This reverts commit
d907396dc1c2ae0268dc54835b108afef4761d4e.
SVN-Revision: 44089
Jo-Philipp Wich [Fri, 23 Jan 2015 12:41:06 +0000 (12:41 +0000)]
scripts: remote-gdb: fix target / libc matching on directory names
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44088
John Crispin [Fri, 23 Jan 2015 12:33:04 +0000 (12:33 +0000)]
base-files: fix led script to skip missing triggers
this is based on http://patchwork.ozlabs.org/patch/424451/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44087
John Crispin [Fri, 23 Jan 2015 12:32:54 +0000 (12:32 +0000)]
uboot-lantiq: add a cgu fix for arx100
http://patchwork.ozlabs.org/patch/431024/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44086
John Crispin [Fri, 23 Jan 2015 12:32:46 +0000 (12:32 +0000)]
ar71xx: add support for TP-LINK TL-WR843ND v1
TP-LINK TL-WR843ND v1 is the same model like wr41, but with
Power over Ethernet on wan port.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44085
John Crispin [Fri, 23 Jan 2015 12:32:36 +0000 (12:32 +0000)]
modules: add 6LoWPAN over Bluetooth Low Energy
Adding support 6LoWPAN over Bluetooth Low Energy in kernel 3.18.
Creating new bluetooth_6lowpan group with CONFIG_6LOWPAN and CONFIG_BT_6LOWPAN.
Adding kernel object dependencies for 6LoWPAN over Bluetooth Low Energy.
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44084
John Crispin [Fri, 23 Jan 2015 12:32:28 +0000 (12:32 +0000)]
lantiq: correct value for fpi clock on ar9
This adds a patch to target/linux/lantiq/patches-3.14
fixing a bug clock code on ar9. The current version returns
the wrong value for the fpi clock frequency in some
cases.
See discussion for further details:
https://lists.openwrt.org/pipermail/openwrt-devel/2015-January/030688.html
I'm not sure about the patch naming and numbering convention.
Do please let me know it this is not OK.
Many thanks,
Ben Mulvihill
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 44083
Felix Fietkau [Fri, 23 Jan 2015 10:54:56 +0000 (10:54 +0000)]
gmp: use http instead of ftp download (#18805)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44082
Felix Fietkau [Fri, 23 Jan 2015 10:54:52 +0000 (10:54 +0000)]
ubus: update to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44081
Felix Fietkau [Fri, 23 Jan 2015 10:54:45 +0000 (10:54 +0000)]
libubox: update to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44080
John Crispin [Thu, 22 Jan 2015 13:13:09 +0000 (13:13 +0000)]
build: revert r44076
the patch causes issues when installing feeds
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44078
John Crispin [Thu, 22 Jan 2015 09:35:46 +0000 (09:35 +0000)]
ar71xx: add support for the UniFi AP Outdoor Plus
the GPIO controlling the rf filter is not configured properly by this patch.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44077
John Crispin [Thu, 22 Jan 2015 09:35:40 +0000 (09:35 +0000)]
build: allow openwrt.git packages to be replaced by feeds
Currently, replacing a package available in openwrt.git requires
modifications in openwrt.git, or requires duplicating the package in a
feed but with a different name, which causes all kind of problems
related to dependencies (all packages selecting it would have to be
modified accordingly to select the new package).
With this change, if a package with the same name is present both in
feeds/ and package/ folders, the one in feeds/ can override the one
in package/, both in the menuconfig and during the build, by passing the
"-f" option to "./scripts/feeds install"
This mechanism is particularly useful for vendor tree, or in general for
application which needs to replace one particular package which exists
within openwrt.git by a custom/newer version.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44076
John Crispin [Thu, 22 Jan 2015 09:35:35 +0000 (09:35 +0000)]
modules: f2fs: enable support for xattr
To use overlayfs on f2fs, xattr needs to be supported.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44075
John Crispin [Thu, 22 Jan 2015 09:35:29 +0000 (09:35 +0000)]
modules: f2fs: add missing symbols for 3.18
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44074
John Crispin [Thu, 22 Jan 2015 09:35:22 +0000 (09:35 +0000)]
ramips: add support for Tenda 3G150B
Add suport for Tenda 3G150B:
- cpu: Ralink RT5350F
- flash: 4MB
- ram: 32MB
- 1x USB 2.0
- 1x RJ45
- one reset button
- battery powered (BP-4L, 3.7V 1450mAh)
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44073
John Crispin [Thu, 22 Jan 2015 09:35:12 +0000 (09:35 +0000)]
ramips: improve and fix Memory 2 Move support
This patch is a follow up for my previous patch:
"ramips: add support for Intenso Memory 2 Move USB 3.0".
It fixes a couple of errors in the DTS (one of which broke
the gpio-buttons). The kmod-leds-gpio dependency has been
dropped as it is already part of the ramips target.
Furthermore the ramdisk/uImage image is generated by default
for the rt3050 subtarget. This image is needed to flash
OpenWrt for the first time onto the device via TFTP.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44072
Florian Fainelli [Wed, 21 Jan 2015 23:55:11 +0000 (23:55 +0000)]
mcs814x: document how to include 3rd party binary packages
The dLAN USB Extender profile was referecing binary packages which are not to
be included in any of the source-only feeds. Instead remove these references
and document how to use the 3rd party feed.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 44071
Rafał Miłecki [Wed, 21 Jan 2015 07:23:31 +0000 (07:23 +0000)]
bcm53xx: backport official Buffalo WZR-900DHP patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44070
Rafał Miłecki [Wed, 21 Jan 2015 06:53:15 +0000 (06:53 +0000)]
bcm53xx: backport spi-nor changes to add gd25q128 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44069
Zoltan Herpai [Tue, 20 Jan 2015 23:49:44 +0000 (23:49 +0000)]
modules: install the newly introduced grace.ko in nfs-common in 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44068
Zoltan Herpai [Tue, 20 Jan 2015 22:50:52 +0000 (22:50 +0000)]
packages: uboot-sunxi: add support for Lamobo R1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44067
Zoltan Herpai [Tue, 20 Jan 2015 22:49:47 +0000 (22:49 +0000)]
packages: uboot-sunxi: fix GMAC TX delay for Bananapi
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44066
John Crispin [Tue, 20 Jan 2015 15:48:07 +0000 (15:48 +0000)]
ar71xx: add support for TL-WA701ND v2
Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com>
SVN-Revision: 44063
Steven Barth [Tue, 20 Jan 2015 13:42:47 +0000 (13:42 +0000)]
nftables: bump for minor fixes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44062
Jo-Philipp Wich [Tue, 20 Jan 2015 12:49:54 +0000 (12:49 +0000)]
polarssl: patch CVE-2015-1182
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44060
Rafał Miłecki [Tue, 20 Jan 2015 08:04:27 +0000 (08:04 +0000)]
bcm53xx: use final (backported) patch fixing serial console
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44059
Rafał Miłecki [Tue, 20 Jan 2015 07:21:30 +0000 (07:21 +0000)]
bcm53xx: backport 3 BCM5301X patches from Hauke repo
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44058
Rafał Miłecki [Tue, 20 Jan 2015 06:58:03 +0000 (06:58 +0000)]
bcm53xx: rename patches modifying DTS files
Ths will allow us to use early 3xx numbers for patches designed for
sending mainline.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44057
John Crispin [Tue, 20 Jan 2015 06:54:53 +0000 (06:54 +0000)]
base-files: Use 200ms LED timing as before for the new phase preinit_regular.
This restores normal pre-r43715 200ms blink-period for the System LED we're all accustomed to see while our OpenWrt routers are booting.
Failsafe possibility will now be signalled with a new 100ms blinking, which is easily recognizable from the normal 200ms booting.
So no existing user will be scared by a new 500ms LED pattern, since such a slow pattern could easily be mistaken for something wrong... I was like "ok why my router is collapsing now, is this a bad flash, a kernel panic, or what else" when I've seen it for the first time ;)
Sorry for not having explained myself better in v1 of this patch.
Original:
Preinit, failsafe is possible: 200ms
Preinit, failsafe not possible anymore, booting normally: 200ms
Failsafe entered: 50ms
Now (after preinit_regular has been introduced):
Preinit, failsafe is possible: 200ms
Preinit, failsafe not possible anymore, booting normally: 500ms *here is the "offending" change*
Failsafe entered: 50ms
With my proposed patch:
Preinit, failsafe is possible: 100ms *indicate this condition with a new timing, that prompts the user to press the key if they want to start failsafe*
Preinit, failsafe not possible anymore, booting normally: 200ms *keep this as before*
Failsafe entered: 50ms
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 44056
John Crispin [Tue, 20 Jan 2015 06:34:28 +0000 (06:34 +0000)]
ralink: add support for firewrt
this is a mt7621 based board
Signed-off-by: wengbj <linux.c@foxmail.com>
SVN-Revision: 44055
John Crispin [Tue, 20 Jan 2015 06:33:49 +0000 (06:33 +0000)]
comgt: Allow using non-TTY devices
Some Huawei mobile broadband sticks utilizing the NCM protocol expose
the control channel as a cdc-wdm device node instead of a virtual TTY.
This device node does not support the terminal ioctls. This patch
adds a check whether the provided device is a TTY or not and does not
attempt to use the terminal ioctls if they are not supported.
v2: reduce diffstat by simplifying code a little
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 44054
Rafał Miłecki [Mon, 19 Jan 2015 16:02:59 +0000 (16:02 +0000)]
uclient: update to the latest version with timeout support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44053
Rafał Miłecki [Mon, 19 Jan 2015 15:56:06 +0000 (15:56 +0000)]
libubox: update to the latest commit with JSON and usock fixes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44052
Rafał Miłecki [Mon, 19 Jan 2015 11:05:22 +0000 (11:05 +0000)]
bcm53xx: add support/firmware for Asus RT-AC87U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44051
Steven Barth [Mon, 19 Jan 2015 08:39:04 +0000 (08:39 +0000)]
netifd: add option to customize IPv6 interface identifiers (thx Hans Dedecker)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44050
Zoltan Herpai [Mon, 19 Jan 2015 00:00:57 +0000 (00:00 +0000)]
packages: uboot-sunxi: uEnv is used as a script rather than default env
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44048
Felix Fietkau [Sun, 18 Jan 2015 20:17:41 +0000 (20:17 +0000)]
ralink: fix ethernet rx buffer size breakage
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44047
Felix Fietkau [Sun, 18 Jan 2015 20:17:28 +0000 (20:17 +0000)]
ralink: improve check rx sg function. use check frags instead of function call
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44046
Felix Fietkau [Sun, 18 Jan 2015 20:17:18 +0000 (20:17 +0000)]
ralink: correct handle hardware rx 2bytes offset
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44045
Felix Fietkau [Sun, 18 Jan 2015 20:17:07 +0000 (20:17 +0000)]
ralink: use fe_reset to control all reset
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44044
Felix Fietkau [Sun, 18 Jan 2015 20:16:50 +0000 (20:16 +0000)]
ralink: improve tx_timeout function
* use default timeout value
* print more debug ring info
* move timeout reset function to workqueue
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44043
Felix Fietkau [Sun, 18 Jan 2015 20:16:44 +0000 (20:16 +0000)]
ralink: add ethernet fe and esw reset control bit
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44042
Felix Fietkau [Sun, 18 Jan 2015 20:16:35 +0000 (20:16 +0000)]
ralink: reduce access to uncached tx/rx dma ring buffer
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44041
Zoltan Herpai [Sun, 18 Jan 2015 16:58:35 +0000 (16:58 +0000)]
sunxi: update Olimex A13 SOM profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44040
Zoltan Herpai [Sun, 18 Jan 2015 16:56:08 +0000 (16:56 +0000)]
packages: uboot-sunxi: re-add Olimex A13 SOM which went AWOL in u-boot trunk
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44039
Zoltan Herpai [Sun, 18 Jan 2015 16:47:50 +0000 (16:47 +0000)]
packages: uboot-sunxi: remove unused Hackberry target
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44038
Luka Perkov [Sun, 18 Jan 2015 16:45:11 +0000 (16:45 +0000)]
uboot-envtools: fix Linksys EA3500 env size
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44037
Luka Perkov [Sun, 18 Jan 2015 16:45:01 +0000 (16:45 +0000)]
kirkwood: enable switch on Linksys EA3500
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44036
Zoltan Herpai [Sun, 18 Jan 2015 16:42:42 +0000 (16:42 +0000)]
packages: update uboot-sunxi to 2015.01
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44035
Zoltan Herpai [Sun, 18 Jan 2015 14:28:13 +0000 (14:28 +0000)]
kernel: add missing config symbol for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44034
John Crispin [Sun, 18 Jan 2015 10:26:57 +0000 (10:26 +0000)]
mac80211: add throughput trigger to ath10k
add a led trigger to ath10k based on the ath9k code
Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
SVN-Revision: 44033
John Crispin [Sun, 18 Jan 2015 09:41:04 +0000 (09:41 +0000)]
lantiq: DGN3500 cleanups
This patch builds on the previous three to streamline support for the
Netgear DGN3500.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44032
John Crispin [Sun, 18 Jan 2015 09:40:58 +0000 (09:40 +0000)]
lantiq: Restore call to orphaned etop function
It seems the call to ltq_get_eth_mac() disappeared at some point. This
patch puts it where it currently most makes sense.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44031
John Crispin [Sun, 18 Jan 2015 09:40:53 +0000 (09:40 +0000)]
kernel: preserve bootloader command line on MIPS
Somewhere in the conversion of the MIPS architecture code to Device Tree
usage, there's been a failure to keep the separate variables holding the
kernel command line reconciled between the tree and the bootloader. This
patch restores previous functionality that broke.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44030
John Crispin [Sun, 18 Jan 2015 09:40:47 +0000 (09:40 +0000)]
lantiq: Fix initscript issue
Currently this initscript fails if the macaddr has any leading zeroes.
This patch corrects the problem.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44029
Felix Fietkau [Sun, 18 Jan 2015 09:25:49 +0000 (09:25 +0000)]
ramips: downgrade mt7621 "Spurious GIC Interrupt" to debug messages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44028
Felix Fietkau [Sun, 18 Jan 2015 09:25:43 +0000 (09:25 +0000)]
ramips: add mt7621 cpu feature overrides
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44027
Felix Fietkau [Sun, 18 Jan 2015 09:25:38 +0000 (09:25 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44026
Felix Fietkau [Sun, 18 Jan 2015 09:25:32 +0000 (09:25 +0000)]
ramips: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44025
Felix Fietkau [Sun, 18 Jan 2015 09:25:27 +0000 (09:25 +0000)]
kernel: backport upstream commit to fix MIPS cache shift with secondary cache enabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44024
Felix Fietkau [Sun, 18 Jan 2015 00:54:06 +0000 (00:54 +0000)]
ar8216: display flow control info in swconfig get_link in case of autonegatiation too
The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't
consider the autonegotiated flow control.
AR8327/AR8337 provide the info about autonegotiated rx/tx flow control
in bits 10 and 11 of the port status register.
Use these values to display info about autonegotiated rx/tx flow
control as part of the get_link attribute.
Successfully tested on TL-WDR4900 (AR8327 rev.4) and
TL-WDR4300 (AR8327 rev.2).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44023
Felix Fietkau [Sun, 18 Jan 2015 00:53:59 +0000 (00:53 +0000)]
ar8216: add 802.3az EEE info to swconfig get_link attribute
AR8327/AR8337 allow to read the result of EEE autonegotiation.
If EEE is autonegotiated between the link partners, display
this as part of the swconfig get_link attribute.
eee100: 100MBit EEE supported by both link partners
eee1000: 1GBit EEE supported by both link partners
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44022
Felix Fietkau [Sun, 18 Jan 2015 00:53:53 +0000 (00:53 +0000)]
ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per port
Users reported network issues with AR8327 which turned out to be caused
by EEE not working correctly with certain link partners (ticket 14597).
The workaround was to disable EEE on all ports (changeset 41577).
The issue was with certain link partners only, therefore this patch
allows to control usage of EEE per port via swconfig.
Still the default is to initially disable EEE on all ports.
Successfully tested on a TL-WDR4900 (AR8327 rev.4)
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44021
Felix Fietkau [Sun, 18 Jan 2015 00:42:43 +0000 (00:42 +0000)]
igmpproxy: add patch to silence unnecessary logging of downstream igmp traffic
This patch adds a simple check to silence logging of messages about
unrecognized igmp packets which originate from devices in local network.
Without this patch igmpproxy floods openwrt syslog with messages such as:
user.warn igmpproxy[19818]: The source address 192.168.1.175 for group
239.255.250.250, is not in any valid net for upstream VIF.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 44020
Felix Fietkau [Sun, 18 Jan 2015 00:37:18 +0000 (00:37 +0000)]
build: explicitly unexport CONFIG_SITE
On systems with CONFIG_SITE in the environment (e.g. OpenSUSE) make will export
the CONFIG_SITE set in include/package.mk by default. This will cause host
builds to get the target site configuration, leading to all kinds of weirdness
(wrong pointer size, wrong endianess).
Fix this by explicitly unexporting CONFIG_SITE. The explicit export for the
target builds overrides the unexport, so the target builds will still correctly
get the site config.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44019
Felix Fietkau [Sun, 18 Jan 2015 00:34:57 +0000 (00:34 +0000)]
build: allow changing kernel name in new image code
Necessary for targets using zImage or other kernel
image types.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44018
Felix Fietkau [Sat, 17 Jan 2015 21:22:36 +0000 (21:22 +0000)]
ramips: add missing copyright info for relocate stub
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44017
Felix Fietkau [Sat, 17 Jan 2015 21:20:05 +0000 (21:20 +0000)]
ramips: add preliminary support for DIR-860L B1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44016
Felix Fietkau [Sat, 17 Jan 2015 21:19:57 +0000 (21:19 +0000)]
build: allow passing parameters to padjffs2 via the pad-rootfs command
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44015
Felix Fietkau [Sat, 17 Jan 2015 21:19:38 +0000 (21:19 +0000)]
ramips: add code for relocating a kernel to the right place
(used if the boot loader wants a different loadaddr/entry)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44014
projects / oweals / openwrt.git / log