Stelian Pop [Wed, 26 Mar 2008 20:52:36 +0000 (21:52 +0100)]
Cleanup DataFlash partition handling
DataFlash partition information has become a mess. This patch
defines a single partition scheme for Atmel DataFlashes. This partition
scheme will be used by all AT91CAP9 and AT91SAM9 boards.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Wed, 26 Mar 2008 21:52:35 +0000 (22:52 +0100)]
Fix CFG_NO_FLASH compilation.
Many Atmel boards have no "real" (NOR) flash on board, and rely only
on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
be present in a board configuration file, while still enabling flash
commands like 'flinfo', 'protect', etc.
Signed-off-by: Stelian Pop <stelian@popies.net>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 30 Mar 2008 14:39:53 +0000 (16:39 +0200)]
use correct at91rm9200 register name in m501sk board
This fixes a naming bug for at91rm9200 lowlevel init code:
NOR boot flash is on chipselect 0, not chipselect 2. This
makes code use the register name from chip datasheets.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
David Brownell [Fri, 18 Jan 2008 20:55:00 +0000 (12:55 -0800)]
use correct at91rm9200 register name
This fixes a naming bug for at91rm9200 lowlevel init code:
NOR boot flash is on chipselect 0, not chipselect 2. This
makes code use the register name from chip datasheets.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 18 Jan 2008 20:45:45 +0000 (12:45 -0800)]
add missing ARM boards to MAKEALL
Add some missing ARM boards to MAKEALL. These build correctly,
unlike several of the boards already listed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Bartlomiej Sieka [Thu, 27 Mar 2008 14:06:40 +0000 (15:06 +0100)]
Fix host tool build breakage, take two
Revert commit
87c8431f and fix build breakage so that the build continues
to work on FC systems.
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Haavard Skinnemoen [Thu, 27 Mar 2008 08:12:40 +0000 (09:12 +0100)]
new-image: Fix host tool build breakage
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Wolfgang Denk [Wed, 26 Mar 2008 23:19:13 +0000 (00:19 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Anatolij Gustschin [Wed, 26 Mar 2008 20:05:43 +0000 (21:05 +0100)]
Fix out of tree building issue
Currently U-Boot building in some external directory
doesn't work. This patch tries to fix the problem.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Wolfgang Denk [Wed, 26 Mar 2008 23:16:34 +0000 (00:16 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
Wolfgang Denk [Wed, 26 Mar 2008 23:16:18 +0000 (00:16 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-usb
Anatolij Gustschin [Wed, 26 Mar 2008 17:13:33 +0000 (18:13 +0100)]
README: update documentation (availability, links, etc.)
Fix typo in README
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Wed, 26 Mar 2008 16:47:44 +0000 (17:47 +0100)]
Fix compilation error in cmd_usb.c
This patch fixes compilation error
cmd_usb.c: In function 'do_usb':
cmd_usb.c:552: error: void value not ignored as it ought to be
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Timur Tabi [Fri, 14 Mar 2008 22:45:29 +0000 (17:45 -0500)]
Add support for setting the I2C bus speed in fsl_i2c.c
Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
but fsl_i2c.c ignores it and uses conservative value when programming the
I2C bus speed.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denk [Wed, 26 Mar 2008 23:03:57 +0000 (00:03 +0100)]
Coding style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Dave Liu [Wed, 26 Mar 2008 14:55:32 +0000 (22:55 +0800)]
drivers: add the support for Freescale SATA controller
Add the Freescale on-chip SATA controller driver to u-boot,
The SATA controller is used on the 837x and 8315 targets,
The driver can be used to load kernel, fs and dtb.
The features list:
- 1.5/3 Gbps link speed
- LBA48, LBA28 support
- DMA and FPDMA support
- Two ports support
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:54:44 +0000 (22:54 +0800)]
ata: add the readme for SATA command line
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:53:24 +0000 (22:53 +0800)]
ata: enable the sata initialize on boot up
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:52:36 +0000 (22:52 +0800)]
ata: add the fis struct for SATA
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:51:44 +0000 (22:51 +0800)]
ata: add the libata support
add simple libata support in u-boot
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:50:45 +0000 (22:50 +0800)]
ata: make the ata_piix driver using new SATA framework
original ata_piix driver is using IDE framework, not real
SATA framework. For now, the ata_piix driver is only used
by x86 sc520_cdp board. This patch makes the ata_piix driver
use the new SATA framework, so
- remove the duplicated command stuff
- remove the CONFIG_CMD_IDE define in the sc520_cdp.h
- add the CONFIG_CMD_SATA define to sc520_cdp.h
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:49:44 +0000 (22:49 +0800)]
ata: add the support for SATA framework
- add the SATA framework
- add the SATA command line
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:48:18 +0000 (22:48 +0800)]
ata: merge the header of ata_piix driver
move the sata.h from include/ to drivers/block/ata_piix.h
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 26 Mar 2008 14:47:06 +0000 (22:47 +0800)]
ata: merge the ata_piix driver
move the cmd_sata.c from common/ to drivers/ata_piix.c,
the cmd_sata.c have some part of ata_piix controller drivers.
consolidate the driver to have better framework.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Markus Klotzbuecher [Wed, 26 Mar 2008 17:26:43 +0000 (18:26 +0100)]
USB, Storage: fix a bug introduced in commit
f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
to only print only information on one storage device, but not for
multiple.
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Anatolij Gustschin [Wed, 26 Mar 2008 16:47:44 +0000 (17:47 +0100)]
Fix compilation error in cmd_usb.c
This patch fixes compilation error
cmd_usb.c: In function 'do_usb':
cmd_usb.c:552: error: void value not ignored as it ought to be
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Kumar Gala [Wed, 26 Mar 2008 13:53:53 +0000 (08:53 -0500)]
85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
Provide a board_lmb_reserve helper function to ensure we reserve
the page of memory we are using for the boot page translation code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 26 Mar 2008 13:34:25 +0000 (08:34 -0500)]
85xx: Update multicore boot mechanism to ePAPR v0.81 spec
The following changes are needed to be inline with ePAPR v0.81:
* r4, r5 and now always set to 0 on boot release
* r7 is used to pass the size of the initial map area (IMA)
* EPAPR_MAGIC value changed for book-e processors
* changes in the spin table layout
* spin table supports a 64-bit physical release address
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Jon Loeliger [Wed, 19 Mar 2008 20:02:07 +0000 (15:02 -0500)]
FSL: Clean up board/freescale/common/Makefile
Each file that can be built here now follows some
CONFIG_ option so that they are appropriately built
or not, as needed. And CONFIG_ defines were added
to various board config files to make sure that happens.
The other board/freescale/*/Makefiles no longer need
to reach up and over into ../common to build their
individually needed files any more.
Boards that are CDS specific were renamed with cds_ prefix.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Kumar Gala [Thu, 28 Feb 2008 04:00:27 +0000 (22:00 -0600)]
85xx: Fix merge duplication
ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
James Yang [Tue, 12 Feb 2008 22:35:07 +0000 (16:35 -0600)]
85xx: Expand CCSR space with more DDR controller registers.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
James Yang [Sat, 9 Feb 2008 00:05:08 +0000 (18:05 -0600)]
85xx: Speed up get_ddr_freq() and get_bus_freq()
get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
called. However, get_sys_info() recalculates extraneous information when
called each time. Have get_ddr_freq() and get_bus_freq() return memoized
values from global_data instead.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
James Yang [Fri, 8 Feb 2008 22:46:27 +0000 (16:46 -0600)]
85xx: Show DDR memory data rate in addition to the memory clock frequency.
Show the DDR memory data rate in addition to the memory clock
frequency. For DDR/DDR2 memories the memory data rate is 2x the
memory clock.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
James Yang [Fri, 8 Feb 2008 22:44:53 +0000 (16:44 -0600)]
85xx: get_tbclk() speed up and rounding fix
Speed up get_tbclk() by referencing pre-computed bus clock
frequency value from global data instead of sys_info_t. Fix
rounding of result to nearest; previously it was rounding
upwards.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Andy Fleming [Wed, 6 Feb 2008 07:19:40 +0000 (01:19 -0600)]
Update SVR numbers to expand support
FSL has taken to using SVR[16:23] as an SOC sub-version field. This
is used to distinguish certain variants within an SOC family. To
account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
constants to reflect the larger value. We also add SVR numbers for all
of the current variants. Finally, to make things neater, rather than
use an enormous switch statement to print out the CPU type, we create
and array of SVR/name pairs (using a macro), and print out the CPU name
that matches the SVR SOC version.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Wed, 6 Feb 2008 07:12:57 +0000 (01:12 -0600)]
Add the Freescale PCI device IDs
Signed-off-by: Andy Fleming <afleming@freescale.com>
Kumar Gala [Thu, 14 Feb 2008 17:04:23 +0000 (11:04 -0600)]
85xx: Added support for multicore boot mechanism
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.
Added support for using the ePAPR defined spin-table mechanism on 85xx.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Kumar Gala [Thu, 17 Jan 2008 22:48:33 +0000 (16:48 -0600)]
85xx: Added support for multicore boot mechanism
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.
Added support for using the ePAPR defined spin-table mechanism on 85xx.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 30 Jan 2008 20:55:14 +0000 (14:55 -0600)]
85xx: Add the concept of CFG_CCSRBAR_PHYS
When we go to 36-bit physical addresses we need to keep the concept of
the physical CCSRBAR address seperate from the virtual one.
For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Wed, 26 Mar 2008 14:38:47 +0000 (15:38 +0100)]
Coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Joakim Tjernlund [Wed, 26 Mar 2008 12:02:13 +0000 (13:02 +0100)]
Add CFG_RTC_DS1337_NOOSC to turn off OSC output
The default settings for RTC DS1337 keeps the OSC
output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
turn it off.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Wolfgang Denk [Wed, 26 Mar 2008 10:48:46 +0000 (11:48 +0100)]
Cleanup coding style, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 26 Mar 2008 09:41:48 +0000 (10:41 +0100)]
Merge branch 'master_merge_new-image' of /home/tur/git/u-boot
Wolfgang Denk [Wed, 26 Mar 2008 09:40:12 +0000 (10:40 +0100)]
README: update documentation (availability, links, etc.)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Bartlomiej Sieka [Wed, 26 Mar 2008 08:38:06 +0000 (09:38 +0100)]
Merge branch 'new-image' of git://denx.de/git/u-boot-testing
Conflicts:
common/cmd_bootm.c
cpu/mpc8xx/cpu.c
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Aras Vaichas [Tue, 25 Mar 2008 01:09:07 +0000 (12:09 +1100)]
USB Storage, add meaningful return value
This patch changes the "usb storage" command to return success if it
finds a USB storage device, otherwise it returns error.
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Anton Vorontsov [Fri, 14 Mar 2008 20:20:18 +0000 (23:20 +0300)]
83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
Linux understands "host" (default), "peripheral" and "otg" (broken).
Though, U-Boot doesn't restrict dr_mode variable to these values (think
of renames in future).
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Fri, 14 Mar 2008 20:20:30 +0000 (23:20 +0300)]
tsec: fix link detection for the RTL8211B PHY
RTL8211B sets link state register after autonegotiation complete,
so with bootdelay=0 RTL8211B will report lack of the link.
To fix this, we should wait for aneg to complete, even if the
link is currently down.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:47:09 +0000 (20:47 +0300)]
mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
device_type = "soc" is being deprecated, newer device trees will use
"fsl,soc" and/or "fsl,immr" for the soc nodes.
This patch also adds clock-frequency property for soc nodes (the same
value as bus-frequency).
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Joe D'Abbraccio [Mon, 24 Mar 2008 17:00:59 +0000 (13:00 -0400)]
Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
With the original value of 1/2 clock cycle delay, the system ran relatively
stable except when we run benchmarks that are intensive users of memory.
When I run samba connected disk with a HDBENCH test, the system locks-up
or reboots sporadically.
Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
Scott Wood [Mon, 24 Mar 2008 17:44:13 +0000 (12:44 -0500)]
mpc83xx: Set PCI I/O bus-address base to zero.
The device trees for these boards describe PCI I/O as starting from
address zero from the device's perspective.
Placing I/O elsewhere may cause problems with certain PCI boards, and may
cause problems with Linux.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:47:05 +0000 (20:47 +0300)]
mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
This patch fixes "system time drifting" problem.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:47:02 +0000 (20:47 +0300)]
mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
This is needed to update /choosen/linux,stdout-path properly.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:47:00 +0000 (20:47 +0300)]
mpc83xx: MPC8360E-RDK: add dhcp command
Plus modify environment to use it and remove bootfile env variable,
it is internal and CONFIG_BOOTFILE is used for these purposes.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:46:57 +0000 (20:46 +0300)]
mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
Current DDR setup easily causes memory corruption, this patch fixes it.
Also fix TIMING_CFG0_MRS_CYC definition.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:46:53 +0000 (20:46 +0300)]
mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
controller and FHCI (QE USB).
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:46:51 +0000 (20:46 +0300)]
mpc83xx: MPC8360E-RDK: add support for NAND
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:46:46 +0000 (20:46 +0300)]
mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
This is needed for BCM PHYs to work on this board.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:46:34 +0000 (20:46 +0300)]
uec: add support for Broadcom BCM5481 Gigabit PHY
This patch adds basic support for Broadcom BCM5481 PHY.
RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
Peter Barada <peterb@logicpd.com>.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:46:28 +0000 (20:46 +0300)]
uec: add support for RGMII_RXID interface mode
PHY drivers will use it to setup software delay between RXD and RXC
signals.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 17:46:24 +0000 (20:46 +0300)]
uec: add support for gbit mii status readings
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 14:40:47 +0000 (17:40 +0300)]
83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
This is primarily for the early console support.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 14:40:43 +0000 (17:40 +0300)]
83xx: initialize serdes for MPC837XRDB boards
On the MPC8377ERDB: 2 SATA and 2 PCI-E.
On the MPC8378ERDB: 2 PCI-E
On the MPC8379ERDB: 4 SATA
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 14:40:32 +0000 (17:40 +0300)]
83xx: serdes setup routines
This patch adds few routines to configure serdes on 837x targets.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 14:40:27 +0000 (17:40 +0300)]
83xx: split COBJS onto separate lines
..plus get rid of some #ifdefs in the .c files.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 24 Mar 2008 14:40:23 +0000 (17:40 +0300)]
83xx: nand support for MPC837XRDB boards
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Jerry Van Baren [Wed, 19 Mar 2008 01:44:41 +0000 (21:44 -0400)]
Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Michael Barkowski [Thu, 20 Mar 2008 17:15:39 +0000 (13:15 -0400)]
mpc8323erdb: remove RTC and add EEPROM
There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Michael Barkowski [Thu, 20 Mar 2008 17:15:34 +0000 (13:15 -0400)]
mpc8323erdb: Improve the system performance
The following changes are based on kernel UCC ethernet performance:
1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
switch to enable this setting.
The following changes are based on the App Note AN3369 and
verified to improve memory latency using LMbench:
3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
previously.
5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
Twr=15ns, and this was already the setting in DDR_MODE)
6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
Trp=15ns)
7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
Tras=40ns)
8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
Trcd=15ns)
9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
Trfc=75ns)
10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
on Tfaw=50ns)
11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
on CL=3 and WL=2).
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Michael Barkowski [Thu, 20 Mar 2008 17:15:28 +0000 (13:15 -0400)]
mpc8323erdb: use readable DDR config macros
Use available shift/mask macros to define DDR configuration.
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Timur Tabi [Fri, 8 Feb 2008 19:15:55 +0000 (13:15 -0600)]
83xx: Add Vitesse VSC7385 firmware uploading
Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
Cleaned up the board header files to make selecting the VSC7385 easier to
control.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Timur Tabi [Fri, 8 Feb 2008 19:15:54 +0000 (13:15 -0600)]
NET: Add Vitesse VSC7385 firmware uploading
The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
and other boards. A small firwmare must be uploaded to its on-board memory
before it can be enabled. This patch adds the code which uploads firmware
(but not the firmware itself).
Previously, this feature was provided by a U-Boot application that was
made available only on Freescale BSPs. The VSC7385 firmware must still
be obtained separately, but at least there is no longer a need for a separate
application.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Tue, 25 Mar 2008 23:52:10 +0000 (00:52 +0100)]
Coding Style cleanyp; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 25 Mar 2008 23:44:52 +0000 (00:44 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mips
Wolfgang Denk [Tue, 25 Mar 2008 23:44:32 +0000 (00:44 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx
Jerry Van Baren [Sat, 22 Mar 2008 18:23:49 +0000 (14:23 -0400)]
Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
These defines embedded the u-boot env variables and/or the bd_t structure
in the fdt blob. The conclusion of discussion on the u-boot email list
was that embedding these in the fdt blob is not useful: there are better
ways of passing the data (in fact, the fdt blob itself replaces the
bd_t struct).
The only board that enables these is the stxxtc and they don't appear
to be used by linux.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Stefan Roese [Mon, 17 Mar 2008 09:49:25 +0000 (10:49 +0100)]
rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
Signed-off-by: Stefan Roese <sr@denx.de>
Kyungmin Park [Sun, 16 Mar 2008 23:54:06 +0000 (08:54 +0900)]
Add Flex-OneNAND booting support
Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
using a NOR Flash interface. This on-chip integration enables system designers
to reduce external system logic and use high-density NAND Flash
in applications that would otherwise have to use more NOR components.
Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
in more flexible way. While MLC area of Flex-OneNAND can be used to store data
that require low reliability and high density, SLC area of Flex-OneNAND
to store data that need high reliability and high performance. Flex-OneNAND
can let users take advantage of storing these two different types of data
into one chip, which is making Flex-OneNAND more cost- and space-effective.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
André Schwarz [Thu, 13 Mar 2008 12:50:52 +0000 (13:50 +0100)]
MPC5200: support setup without FEC
Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Jon Loeliger [Thu, 6 Mar 2008 00:05:46 +0000 (18:05 -0600)]
FSL: Move board/mpc8266ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Thu, 6 Mar 2008 00:05:47 +0000 (18:05 -0600)]
FSL: Move board/mpc7448hpc2 under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Thu, 6 Mar 2008 00:05:45 +0000 (18:05 -0600)]
FSL: Move board/mpc8260ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
goda.yusuke [Wed, 5 Mar 2008 08:08:33 +0000 (17:08 +0900)]
net: Add support AX88796L ethernet device
AX88796L is device of NE2000 compatible.
This patch support AX88796L ethernet device.
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Wolfgang Denk [Tue, 25 Mar 2008 21:50:41 +0000 (22:50 +0100)]
ne2000 driver: change #ifdef to Makefile conditional compilation
Signed-off-by: Wolfgang Denk <wd@denx.de>
goda.yusuke [Wed, 5 Mar 2008 08:08:20 +0000 (17:08 +0900)]
net: Divided code of NE2000 ethernet driver
There are more devices of the NE2000 base.
A present code is difficult for us to support more devices.
To support more NE2000 clone devices, separated the function.
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Mike Frysinger [Mon, 25 Feb 2008 04:58:13 +0000 (23:58 -0500)]
net/Blackfin: move on-chip MAC driver into drivers/net/
The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
directory, but it is not board specific, so relocate it to the drivers dir
so that other Blackfin ports can utilize it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 25 Feb 2008 04:52:35 +0000 (23:52 -0500)]
smc91111: use SSYNC() rather than asm(ssync) for Blackfin
Since the "ssync" instruction may have hardware anomalies associated with
it, have the smc91111 driver use the SSYNC macro rather than invoking it
directly. We workaround all the anomalies via this macro.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Bryan O'Donoghue [Sun, 17 Feb 2008 22:57:47 +0000 (22:57 +0000)]
8xx: Update OF support on 8xx
This patch does some shifting around of OF support on 8xx.
Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
Kumar Gala [Fri, 15 Feb 2008 21:16:18 +0000 (15:16 -0600)]
ppc: Allow boards to specify how much memory they can map
For historical reasons we limited the stack to 256M because some boards
could only map that much via BATS. However newer boards are capable of
mapping more memory (for example 85xx is capble of doing up to 2G).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Bryan O'Donoghue [Fri, 15 Feb 2008 01:05:58 +0000 (01:05 +0000)]
8xx : Add OF support to Adder875 board port - resubmit
Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
Kumar Gala [Fri, 15 Feb 2008 02:44:42 +0000 (20:44 -0600)]
Add setexpr command
Add a simple expr style command that will set an env variable as the result
of the command. This allows us to do simple math in shell. The following
operations are supported: &, |, ^, +, -, *, /.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Jon Loeliger [Wed, 5 Mar 2008 23:27:48 +0000 (17:27 -0600)]
FSL: Move board/mpc7448hpc2 under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Wed, 5 Mar 2008 23:21:43 +0000 (17:21 -0600)]
FSL: Move board/mpc8266ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Wed, 5 Mar 2008 22:41:41 +0000 (16:41 -0600)]
FSL: Move board/mpc8260ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Shinya Kuribayashi [Tue, 25 Mar 2008 12:30:08 +0000 (21:30 +0900)]
[MIPS] Move gth2_config from ARM section to MIPS
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Shinya Kuribayashi [Tue, 25 Mar 2008 12:30:07 +0000 (21:30 +0900)]
[MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Shinya Kuribayashi [Tue, 25 Mar 2008 12:30:07 +0000 (21:30 +0900)]
[MIPS] Fix dcache_status()
You can't judge UNCACHED by Config.K0 LSB.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Shinya Kuribayashi [Tue, 25 Mar 2008 12:30:07 +0000 (21:30 +0900)]
[MIPS] Introduce _machine_restart
Handles machine specific functions by using weak functions.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Shinya Kuribayashi [Tue, 25 Mar 2008 12:30:07 +0000 (21:30 +0900)]
[MIPS] Cleanup CP0 Status initialization
Add setup_c0_status from Linux. For the moment we disable interrupts, set
CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
reset-time configuration and will work well across most processors.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Shinya Kuribayashi [Tue, 25 Mar 2008 12:30:07 +0000 (21:30 +0900)]
[MIPS] Initialize CP0 Cause before setting up CP0 Status register
Without this change, we'll be suffering from deffered WATCH exception
once Status.EXL is cleared. Make sure Cause.WP is cleared.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
projects / oweals / u-boot.git / log