Chris Packham [Sun, 3 Jun 2018 04:21:27 +0000 (16:21 +1200)]
ARM: kirkwood: SBx81LIFKW: Enable network hardware
The SBx81LIFKW boards connect to the internal chassis management network
via a Marvell
88e6097 L2 switch. The chassis connections are direct
serdes on ports 8 and 9 with a RGMII interface on port 10 connected to
the CPU MAC.
For debugging purposes ports 0 and 1 are also taken out to headers on
the board. Because the debug interfaces are sometimes connected to with
straight ribbon cables we need to run them at 10Mbps.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Wed, 30 May 2018 08:14:35 +0000 (20:14 +1200)]
ARM: add SBx81LIFKW board
This is a series of line cards for Allied Telesis's SBx8100 chassis
switch. The CPU block is common to the SBx81GS24a, SBx81XS6, SBx81XS16
and SBx81GT40 cards collectively referred to as SBx81LIFKW in u-boot.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Wed, 30 May 2018 08:14:34 +0000 (20:14 +1200)]
ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled
The mach/config.h file would helpfully define CONFIG_SYS_I2C and
CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This
conflicts with the way DM_I2C works. As a transitional measure don't
automatically define these if CONFIG_DM_I2C is defined. It should be
possible to remove this once all kirkwood boards are migrated to DM.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Michael Walle [Tue, 29 May 2018 21:13:20 +0000 (23:13 +0200)]
arm: kirkwood: lsxl: Add SPI driver model support
This patch shows how to enable driver model support for the LS-CHLv2 and
LS-XHL boards.
There are a couple of open questions:
- do I need the u-boot,dm-pre-reloc tags in the device tree?
- should mach/config.h define CONFIG_DM_SEQ_ALIAS?
- how can we split this patch or are there any other pending patches
which does the same and I didn't catch these.
This patch is based on the http://git.denx.de/u-boot-marvell.git (master
branch) and needs the following patches, which are still pending:
https://patchwork.ozlabs.org/patch/909618/
https://patchwork.ozlabs.org/patch/909617/
https://patchwork.ozlabs.org/patch/909973/
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
Michael Walle [Tue, 29 May 2018 21:13:19 +0000 (23:13 +0200)]
enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board
Synchronize it with the LS-XHL board.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Nettleton [Mon, 28 May 2018 16:10:30 +0000 (19:10 +0300)]
arm: mvebu: switch clearfog to use device-tree i2c and gpio
This switches the clearfog boards to use DM based gpio and i2c
drivers. The io expanders are configured via their device-tree
entries.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: add DT i2c aliases]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Nettleton [Mon, 28 May 2018 10:35:15 +0000 (13:35 +0300)]
arm: mvebu: enable sata support for clearfog
The a38x sata interfaces run in ahci mode and can
be accessed via the scsi command.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: rebase on current upstream]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Rabeeh Khoury [Sun, 27 May 2018 15:34:08 +0000 (18:34 +0300)]
mvebu: a38x: Force receiver detected on PCIe lanes
Some QCA988x based modules presence is not detected by the SERDES lanes,
so force this detection which will trigger the LTSSM state machine to
negotiate link.
An example of such a card is WLE900VX.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Mario Six <mario.six@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
Tom Rini [Mon, 4 Jun 2018 22:08:45 +0000 (18:08 -0400)]
Prepare v2018.07-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 4 Jun 2018 15:57:37 +0000 (11:57 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Ramon Fried [Thu, 31 May 2018 18:24:05 +0000 (21:24 +0300)]
MAINTAINERS: Take over DB410c maintainership
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Ramon Fried [Thu, 31 May 2018 16:17:00 +0000 (19:17 +0300)]
db410c: Added pre-relocation attribute to pinctrl
u-boot,dm-pre-reloc was missing from pinctrl and it's
children node. causing failure to configure pin mux
before relocation.
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Heinrich Schuchardt [Sun, 3 Jun 2018 16:59:13 +0000 (18:59 +0200)]
scripts: mailmapper: SPDX license identifier
If the SPDX license identifier is in the first line the shell does not
recognize which interpreter shall be used to execute the script.
Cf. https://www.kernel.org/doc/html/v4.16/process/license-rules.html
for scripts which require the '#!PATH_TO_INTERPRETER' in the first line
(...) the SPDX identifier goes into the second line.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Vagrant Cascadian [Sun, 3 Jun 2018 18:56:05 +0000 (11:56 -0700)]
Inherit default value for bootdelay from distro_bootcmd on odroid-xu3.
The default value with distro_bootcmd is 2 seconds, which is
reasonably fast, and provides a consistent experience across platforms
supporting distro_bootcmd.
The current bootdelay value of 0 seconds is a bit challenging to
interrupt when desired.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Marek Vasut <marex@denx.de>
Vagrant Cascadian [Sun, 3 Jun 2018 19:26:57 +0000 (12:26 -0700)]
Set time and umask on multi-dtb fit images to ensure reproducibile builds.
When building compressed (lzop, gzip) multi-dtb fit images, the
compression tool may embed the time or umask in the image.
Work around this by manually setting the time of the source file using
SOURCE_DATE_EPOCH and a hard-coded 0600 umask.
With gzip, this could be accomplished by using -n/--no-name, but lzop
has no current workaround:
https://bugs.debian.org/896520
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Michal Simek [Mon, 4 Jun 2018 06:33:30 +0000 (08:33 +0200)]
xilinx: Sync symbols location in defconfigs
CONFIG_DEBUG_UART_BASE and CONFIG_DEBUG_UART_CLOCK have changed that's
why this sync.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tom Rini [Mon, 4 Jun 2018 12:55:00 +0000 (08:55 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sunxi
Jagan Teki [Mon, 28 May 2018 11:04:43 +0000 (16:34 +0530)]
board: sun50i: Add Amarula A64-Relic initial support
Amarula A64-Relic is A64 based IoT device, which support
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 1GB DDR3 RAM
- 8GB eMMC
- AP6330 Wifi/BLE
- MIPI-DSI
- CSI: OV5640 sensor
- USB OTG
- 12V DC power supply
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tom Rini [Sun, 3 Jun 2018 20:10:22 +0000 (16:10 -0400)]
SPDX: Fixup tags from latest EFI PR
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 3 Jun 2018 16:27:56 +0000 (12:27 -0400)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
Patch queue for efi - 2018-06-03
A number of fixes and feature completeness work this time around:
- Fix sunxi GOP reservation
- Fix cursor position
- Fix efi_get_variable
- Allow more selftest parts to build on x86_64
- Allow unaligned memory access on armv7
- Implement ReinstallProtocolInterface
- More sandbox preparation
Tom Rini [Sun, 3 Jun 2018 16:27:42 +0000 (12:27 -0400)]
Merge tag 'signed-rpi-next' of git://github.com/agraf/u-boot
Patch queue for rpi - 2018-06-03
This pull request only includes a single patch that was left
out in the last one: A fix to have the fdt stay at its original
location in RAM during boot.
Alexander Graf [Sun, 3 Jun 2018 13:51:17 +0000 (15:51 +0200)]
efi_loader: Fix warning in raw/cols query
The code to determine rows / cols on the screen could potentially run
into a case where it doesn't know how big the screen is. In that case,
assume 80x25.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tuomas Tynkkynen [Fri, 20 Apr 2018 10:03:48 +0000 (13:03 +0300)]
rpi: Fix fdt_high & initrd_high for 64-bit builds
The magic value that disables relocation is dependent on the CPU word
size, so the current '
ffffffff' is doing the wrong thing on aarch64.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 27 May 2018 14:47:21 +0000 (16:47 +0200)]
efi_loader: create handles from normal memory
Handles are not used at runtime. They are freed by the firmware when the
last protocol interface is uninstalled. So there is no reason to use EFI
memory when creating handles.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 27 May 2018 14:45:09 +0000 (16:45 +0200)]
efi_loader: efi_mem_carve_out should return s64
efi_mem_carve_out() is used to remove memory pages from a mapping.
As the number of pages to be removed is a 64bit type the return type
should be 64bit too.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sat, 26 May 2018 08:32:27 +0000 (10:32 +0200)]
efi_loader: avoid anonymous constants for AllocatePages
Do not use anonymous constants when calling efi_allocage_pages.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Ivan Gorinov [Fri, 25 May 2018 17:45:09 +0000 (10:45 -0700)]
efi_selftest: check for buffer overflow in efi_get_variable
Allocate a buffer on the stack instead of an array of uninitialized
pointers; check if GetVariable writes past the end of the buffer.
Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 24 May 2018 17:34:45 +0000 (19:34 +0200)]
Makefile: clean should delete *.so
Files *.so are generated files. So the clean target should delete them.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 25 May 2018 10:30:39 +0000 (12:30 +0200)]
efi_selftest: imply FAT, FAT_WRITE
efi_selftest_block_device accesses a FAT file system.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 11 May 2018 16:15:41 +0000 (18:15 +0200)]
efi_loader: DocBook comments for boot services
With 'make htmldocs' we can generate a documentation if the function
comments follow the DocBook conventions.
This patch adjusts the comments for EFI boot services and provides the
DocBook template for the EFI subsystem.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Simon Glass [Wed, 16 May 2018 15:42:26 +0000 (09:42 -0600)]
Add a comment for board_quiesce_devices()
This exported function should have a comment describing what it does. Also
it should really be removed in favour of device_remove(), which handles
this sort of thing now. Add a comment with a TODO.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Simon Glass [Wed, 16 May 2018 15:42:25 +0000 (09:42 -0600)]
Define board_quiesce_devices() in a shared location
This undocumented function relies on arch-specific code to declare a nop
weak version. Add the weak function in common code instead to avoid having
to duplicate the same function in each arch.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Simon Glass [Wed, 16 May 2018 15:42:23 +0000 (09:42 -0600)]
efi: sandbox: Add required linker sections
The EFI loader code requires certain linker sections to exist. Add these
for sandbox so that the EFI loader code will link.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Simon Glass [Wed, 16 May 2018 15:42:22 +0000 (09:42 -0600)]
sandbox: Add a setjmp() implementation
Add an implementation of setjmp() and longjmp() which rely on the
underlying host C library. Since we cannot know how large the jump buffer
needs to be, pick something that should be suitable and check it at
runtime. At present we need access to the underlying struct as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Simon Glass [Wed, 16 May 2018 15:42:19 +0000 (09:42 -0600)]
efi: Update some comments related to smbios tables
Clarify the operation of this code with some additional comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Tue, 3 Apr 2018 19:59:34 +0000 (21:59 +0200)]
efi_selftest: test unaligned memory access
According to the UEFI spec unaligned memory access should be enabled on
CPUs supporting it.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Tue, 3 Apr 2018 19:59:33 +0000 (21:59 +0200)]
arm: armv7: allow unaligned memory access
The UEFI spec mandates that unaligned memory access should be enabled if
supported by the CPU architecture.
This patch implements the function unaligned_access() to reset the aligned
access flag in the system control register (SCTLR). It is called when the
bootefi command is invoked.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: fix SPDX identifier]
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Tue, 3 Apr 2018 19:59:32 +0000 (21:59 +0200)]
efi_loader: allow unaligned memory access
The UEFI spec mandates that unaligned memory access should be enabled if
supported by the CPU architecture.
This patch adds an empty weak function unaligned_access() that can be
overridden by an architecture specific routine.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 11 May 2018 10:09:23 +0000 (12:09 +0200)]
efi_selftest: test ReinstallProtocolInterface
Add a test for ReinstallProtocolInterface to the controller selftest.
As ReinstallProtocolInterface has to connect controllers to the new
interface is does not fit to the manage protocols selftest.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 11 May 2018 10:09:22 +0000 (12:09 +0200)]
efi_loader: implement ReinstallProtocolInterface
The ReinstallProtocolInterface boot time service is implemented.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 11 May 2018 10:09:21 +0000 (12:09 +0200)]
efi_loader: check interface when uninstalling protocol
The interface has to be checked in UninstallProtocolInterface.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 11 May 2018 10:09:20 +0000 (12:09 +0200)]
efi_selftest: correct efi_selftest_manageprotocols
Pass the correct interface when uninstalling a protocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Emmanuel Vadot [Fri, 4 May 2018 08:26:55 +0000 (10:26 +0200)]
video: sunxi: de2: Reserve the fb region in the EFI memory map
If compile with support for the efi loader we need to mark the pages
allocated for the framebuffer as reserved so the kernel won't attempt
to use them for other uses.
Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Ivan Gorinov [Fri, 11 May 2018 20:18:25 +0000 (13:18 -0700)]
efi_loader: fix off-by-one bug in efi_get_variable
efi_get_variable() always stores an extra zero byte after the output data.
When the returned data size matches the output buffer size, the extra zero
byte is stored past the end of the output buffer.
Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sat, 12 May 2018 01:28:44 +0000 (03:28 +0200)]
README.uefi: update list of missing functionality
Update the list of missing functionality for boottime and runtime services.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Wed, 16 May 2018 16:17:38 +0000 (18:17 +0200)]
efi_loader: avoid using unitialized values as console size
If a request for the console size would be answered with a response
with less then three values, uninitialized stack memory would be
copied to the number of rows and columns of the terminal.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 17 May 2018 05:57:06 +0000 (07:57 +0200)]
efi_selftest: unit test for variable services
Provide a unit test for variable services.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 17 May 2018 05:57:05 +0000 (07:57 +0200)]
efi_loader: adjust definitions of variable services
The definitons of the variable services are adjusted:
- use efi_uintn_t instead of unsigned long
- use u16 * instead of s16 * for Unicode strings
- correct definition of QueryVariableInfo
- rename efi_get_next_variable to efi_get_next_variable_name
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 17 May 2018 16:24:48 +0000 (18:24 +0200)]
efi_selftest: do not call efi_init_obj_list() twice
Remove a superfluous call to efi_init_obj_list() invoked by
'bootefi selftest'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 17 May 2018 16:57:13 +0000 (18:57 +0200)]
Makefile: clean should delete *.efi
Files *.efi are generated files. So the clean target should delete them.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 18 May 2018 17:12:20 +0000 (19:12 +0200)]
efi_loader: build CRT0 and RELOC on x86_64
The efi selftest and the hello application require CRT0 and RELOC to be
built.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 18 May 2018 17:12:19 +0000 (19:12 +0200)]
efi_selftest: allow building relocation code on x86_64
Variables EFI_RELOC and EFI_CRT0 have to be defined to build the
EFI unit tests. This patch ensures this for the x86 architecure.
If we compile with EFI_STUB, the bitness depends on CONFIG_EFI_STUB_64BIT.
Otherwise the bitness depends on CONFIG_X86_64.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 29 Apr 2018 18:02:46 +0000 (20:02 +0200)]
efi_loader: always check parameters in efi_cout_query_mode()
If we cannot determine the size of the serial terminal we still have
to check the parameters of efi_cout_query_mode().
Querying the size of the serial terminal drains the keyboard buffer.
So make sure we do this during the initialization and not in the midst
of an EFI application.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 29 Apr 2018 14:24:26 +0000 (16:24 +0200)]
efi_selftest: updating the cursor position
The test case for text output is updated to check correct updating
of the cursor position.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 29 Apr 2018 14:24:25 +0000 (16:24 +0200)]
efi_loader: updating the cursor position
The current coding advances the column by the number of UTF-8 bytes.
The column should be increased by one per unicode character.
The UEFI spec provides advance rules for U+0000, U+0008, U+000A,
and U000D. All other characters, including control characters
U+0007 (bel) and U+0009 (tab), have to increase the column by one.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 27 Apr 2018 17:07:24 +0000 (19:07 +0200)]
efi_loader: remove unnecessary include
asm/global_data.h is already included via common.h.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 29 Apr 2018 21:37:12 +0000 (23:37 +0200)]
efi_loader: if EFI_LOADER is enabled, enable CFB_CONSOLE_ANSI
EFI applications like GRUB issue ANSI sequences for setting colors
and for positioning. So if the EFI subsystem is enabled, we should
also enable ANSI control sequences by default.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Ivan Gorinov [Wed, 2 May 2018 23:36:02 +0000 (16:36 -0700)]
efi_loader: correctly apply relocations from the .reloc section
Instead of difference between preferred and actual image base, the
actual base is added to the fields specified in the .reloc section.
Use ImageBase from PE optional header to compute the delta,
exit early if the image is loaded at the preferred address.
Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tom Rini [Sat, 2 Jun 2018 01:10:18 +0000 (21:10 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
Tom Rini [Fri, 1 Jun 2018 20:46:39 +0000 (16:46 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mips
Tom Rini [Fri, 1 Jun 2018 17:50:15 +0000 (13:50 -0400)]
Merge tag 'xilinx-for-v2018.07-2' of git://denx.de/git/u-boot-microblaze
Xilinx changes for v2018.07 second pull
zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
- Simplify mmc bootmode
- Remove dc2 useless configuration file
- Cleanup mini config
- Defconfig syncup
- zcu100, zcu104 and zcu111 dts fixes
xilinx:
- Use live-tree functions in some drivers
- Add support for Avnet Minized and Antminer S9
fpga:
- Add secure bitstream loading support
mmc:
- Add hs200 mode support
usb xhci:
- Header fix
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:43 +0000 (19:39 +0100)]
phy: bcm6318-usbh: convert to use live dt
Also fix bad accents in my name.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:42 +0000 (19:39 +0100)]
phy: bcm6368-usbh: convert to use live dt
Also fix bad accents in my name.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:41 +0000 (19:39 +0100)]
phy: bcm6358-usbh: convert to use live dt
Also fix bad accents in my name.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:40 +0000 (19:39 +0100)]
phy: bcm6348-usbh: convert to use live dt
Also fix bad accents in my name.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:39 +0000 (19:39 +0100)]
cpu: bmips: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:38 +0000 (19:39 +0100)]
ram: bmips: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:37 +0000 (19:39 +0100)]
spi: bcm63xx_hsspi: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:36 +0000 (19:39 +0100)]
spi: bcm63xx_spi: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:35 +0000 (19:39 +0100)]
power: domain: bcm6328: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:34 +0000 (19:39 +0100)]
led: bcm6328: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:33 +0000 (19:39 +0100)]
led: bcm6358: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:32 +0000 (19:39 +0100)]
gpio: bcm6345: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:31 +0000 (19:39 +0100)]
reset: bcm6345: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:30 +0000 (19:39 +0100)]
clk: bcm6345: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:29 +0000 (19:39 +0100)]
serial: bcm6345: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Thu, 22 Mar 2018 18:39:28 +0000 (19:39 +0100)]
watchdog: bcm6345: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Álvaro Fernández Rojas [Sun, 29 Apr 2018 19:56:54 +0000 (21:56 +0200)]
dm: core: add functions to get memory-mapped I/O addresses
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 1 Jun 2018 13:52:15 +0000 (09:52 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Siva Durga Prasad Paladugu [Thu, 31 May 2018 09:40:23 +0000 (15:10 +0530)]
fpga: zynqmp: Add secure bitstream loading for ZynqMP
This patch adds support for loading secure bitstreams on ZynqMP
platforms. The secure bitstream images has to be generated using
Xilinx bootgen tool.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 31 May 2018 09:40:22 +0000 (15:10 +0530)]
cmd: fpga: Add support to load secure bitstreams
This patch adds support to load secure bitstreams(authenticated or
encrypted or both). As of now, this feature is added and tested only
for xilinx bitstreams and the secure bitstream was generated using
xilinx bootgen tool, but the command is defined in more generic way.
Command example to load authenticated and device key
encrypted bitstream is as follows
"fpga loads 0 100000
2000000 0 1"
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 31 May 2018 09:40:21 +0000 (15:10 +0530)]
cmd: fpga: Reorder the arguments parsing code
This patch modifies the arguments parsing code by parsing
based on requested operation for fpga loadfs and then
parses the most common/basic args for other fpga load
commands. This makes it easy for new command extensions
or additions especially the commands with more args.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Marek Vasut [Thu, 31 May 2018 16:30:17 +0000 (18:30 +0200)]
ARM: dts: rmobile: Sync R8A77990 Ebisu DTS with Linux
Import the R8A77990 and Ebisu DTS from linux-next to get the latest
version. This makes AVB ethernet work in U-Boot since the ethernet
node is now present in DT, as well as GPIOs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 26 Apr 2018 11:31:39 +0000 (13:31 +0200)]
ARM: renesas: Add R8A77990 E3 Ebisu board
Add support for the R8A77990 Ebisu board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Takeshi Kihara [Wed, 11 Apr 2018 09:37:42 +0000 (18:37 +0900)]
ARM: dts: rmobile: Add Renesas Ebisu board support
Basic support for the Renesas Ebisu board based on R-Car E3:
- Memory,
- Main crystal,
- Serial console,
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[shimoda: rebase and add SPDX-License-Identifier]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Wed, 11 Apr 2018 09:37:41 +0000 (18:37 +0900)]
ARM: dts: rmobile: Add Renesas R8A77990 SoC support
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC:
- PSCI
- CPU (single)
- Cache controller
- Main clocks and controller
- Interrupt controller
- Timer
- PMU
- Reset controller
- Product register
- System controller
- UART for console
Inspried by a patch by Takeshi Kihara in the BSP.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 26 Apr 2018 08:09:06 +0000 (10:09 +0200)]
ARM: renesas: Add R8A77990 E3 SoC ID
Add ID and Kconfig entry for the Renesas R8A77990 E3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 26 Apr 2018 11:20:10 +0000 (13:20 +0200)]
net: ravb: Add R8A77990 E3 compatible
Add new compatible to the Ethernet AVB driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 26 Apr 2018 11:19:29 +0000 (13:19 +0200)]
mmc: renesas-sdhi: Add R8A77990 E3 compatible
Add new compatible to the Uniphier SD driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 26 Apr 2018 11:18:45 +0000 (13:18 +0200)]
gpio: rmobile: Add R8A77990 E3 compatible
Add new compatible to the GPIO driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 26 Apr 2018 11:09:20 +0000 (13:09 +0200)]
pinctrl: renesas: Initial R8A77990 PFC support
This patch adds initial pinctrl driver to support for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Takeshi Kihara [Wed, 7 Mar 2018 06:26:12 +0000 (15:26 +0900)]
pinctrl: renesas: Add PORT_GP_11 helper macro
This follows the style of existion PORT_GP_X macros and
will be used by a follow-up patch for the r8a77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 26 Apr 2018 08:19:03 +0000 (10:19 +0200)]
clk: renesas: Add R8A77990 E3 clock tables
Add clock tables for R8A77990 E3 SoC .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 31 May 2018 17:47:42 +0000 (19:47 +0200)]
clk: renesas: Add PE clock handling
The PE clock have two parents, add support for picking the correct
one and deriving the clock from it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 31 May 2018 17:25:41 +0000 (19:25 +0200)]
clk: renesas: Add PLL1 and PLL3 dividers
Add and use the PLL1 and PLL3 dividers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 31 May 2018 17:06:02 +0000 (19:06 +0200)]
clk: renesas: Pass clock rate around as 64bit number internally
The PLL rate could be in the GHz range, which could overflow a 32bit
data type. Since the hardware is 64bit anyway, pass the clock rates
as 64bit number internally to avoid this.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 31 May 2018 16:56:35 +0000 (18:56 +0200)]
clk: renesas: Fix swapped arguments in debug message
The mul and div arguments were reported in reverse order in the debug
message, swap them to fix this.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 31 May 2018 12:42:07 +0000 (14:42 +0200)]
ARM: rmobile: Represent SF partitioning with mtdparts on Stout
Add mtdparts description for the board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 31 May 2018 12:41:58 +0000 (14:41 +0200)]
ARM: rmobile: Represent SF partitioning with mtdparts on Silk
Add mtdparts description for the board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Thu, 31 May 2018 12:41:53 +0000 (14:41 +0200)]
ARM: rmobile: Represent SF partitioning with mtdparts on Porter
Add mtdparts description for the board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
projects / oweals / u-boot.git / log