Ben Greear [Tue, 10 Jan 2017 23:49:42 +0000 (15:49 -0800)]
ath10k-fw: Update to latest CT firmware
For 988X, 9980, 9984 CT firmware.
This should allow IBSS + RSN on at least the 988X firmware,
and includes recent stability fixes for all firmware.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Ben Greear [Tue, 10 Jan 2017 23:49:41 +0000 (15:49 -0800)]
ath10k-ct: Update to latest CT 4.7 ath10k driver.
This at least makes it harder to hit some txq related
crashes on firmware restart, a potential memory leak,
and some other fixes.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Felix Fietkau [Fri, 13 Jan 2017 08:15:03 +0000 (09:15 +0100)]
armvirt: enable the USB feature flag
USB devices can be passed through from the host to the guest
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 13 Jan 2017 08:10:47 +0000 (09:10 +0100)]
mountd: drop USB related dependencies
That way we can avoid making it nonshared
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Yo Abe [Wed, 11 Jan 2017 18:07:14 +0000 (03:07 +0900)]
ramips: fix WLI-TX4-AG300N boot and network
Partition label "linux" prevents the root file system to be mounted at
boot time leading to a kernel panic. After changing it to "firmware",
the 2 uimage partitions "kernel", "rootfs" and squashfs "rootfs_data"
are correctly recognized.
The attached IP175C 10/100 MBit switch cannot connect to a link with
fixed 1000Mbit speed. The correct link speed is 100MBit. The switch
is detected and can be configured via mdio bus and should allow two
separable VLANs to be configured for the 4 available ports.
Signed-off-by: Yo Abe <abe.geel@gmail.com>
[picked from openwrt/PR#330]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Andrew Yong [Sun, 8 Jan 2017 06:30:10 +0000 (14:30 +0800)]
ramips: add support for VoCore2
This patch adds support for the VoCore VoCore2 and its complementary
"ultimate" dock.
Specifications:
- SoC: MediaTek MT7628AN (580MHz, ramips)
- RAM: 128MB DDR2 166MHz
- Storage: 16MB NOR SPI flash onboard + microSD slot on dock
- Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2
boards with onboard 1x chip antenna
- Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header
- Dock hardware:
- USB 2.0 socket
- MicroSD socket
- 100Mbps Ethernet x1
- 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S
DAC/ADC (support WIP)
- Micro USB for power and console (UART2)
Initial installation:
- VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on
SSID "VoCore2"
- Connect to VoCore2 by Ethernet or Wi-Fi
- `ssh root@192.168.1.1` (password is "vocore")
- scp/wget/etc. LEDE sysupgrade.bin to VoCore2
- `sysupgrade -n <your image>.bin` (don't keep old config, as the
original firmware uses Ralink SDK Wi-Fi drivers and not
mt76+mac80211)
- after sysupgrade completes, Wi-Fi will be disabled by default so use
Ethernet or the micro USB console to configure Wi-Fi again
Signed-off-by: Andrew Yong <me@ndoo.sg>
David Varga [Tue, 10 Jan 2017 18:12:34 +0000 (19:12 +0100)]
ar71xx: enable serial console on Mikrotik RB411/RB433
This patch adds support for serial console on Mikrotik RB411 and RB433
series devices.
Signed-off-by: David Varga <duvi@duvinet.hu>
[picked from FS#377]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Daniel Golle [Fri, 13 Jan 2017 04:41:18 +0000 (05:41 +0100)]
ramips: rt3883: fix typo in pinctrl lna_g_func
Spotted by forum users
https://forum.openwrt.org/viewtopic.php?pid=347439#p347439
Reported-by: Tom Psyborg <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hans Dedecker [Thu, 12 Jan 2017 11:11:09 +0000 (12:11 +0100)]
map: take over maintainership
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Thu, 12 Jan 2017 11:10:18 +0000 (12:10 +0100)]
odhcp6c: take over maintainership
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Thu, 12 Jan 2017 11:06:11 +0000 (12:06 +0100)]
odhcpd: take over maintainership
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Thu, 12 Jan 2017 09:17:48 +0000 (10:17 +0100)]
Revert "dnsmasq: change 'add_local_hostname' to use dnsmasq '--interface-name'"
This causes problem when a FQDN is configured in /etc/config/system. The
domain name will appear twice in reverse DNS.
Next to that, there seems to be a bug in dnsmasq. From the manual page:
--interface-name=<name>,<interface>[/4|/6]
Return a DNS record associating the name with the primary address
on the given interface. This flag specifies an A or AAAA record for the
given name in the same way as an /etc/hosts line, except that the address
is not constant, but taken from the given interface. The interface may be
followed by "/4" or "/6" to specify that only IPv4 or IPv6 addresses
of the interface should be used. If the interface is down, not configured
or non-existent, an empty record is returned. The matching PTR record is
also created, mapping the interface address to the name. More than one name
may be associated with an interface address by repeating the flag; in that
case the first instance is used for the reverse address-to-name mapping.
It does not just create an A/AAAA record for the primary address, it creates
one for all addresses. And what is worse, it seems to actually resolve to the
non-primary address first. This is quite annoying when you use floating IP
addresses (e.g. VRRP), because when the floating IP is on the other device,
SSH failes due to incorrect entry in the known hosts file.
I know that this is not a common setup, but it would be nice if there was an
option to restore the previous behaviour, rather than just forcing this new
feature on everybody.
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 12 Jan 2017 08:53:32 +0000 (09:53 +0100)]
map: delete map-t device when tearing down map interface
Delete the map-t device when tearing down the map-t interface; as such
there's no conflict when the map-t interface comes up again when trying
to add the map-t device as the map-t device was still present
(Can not add: device 'map-wan6_4' already exists!).
Only call ifdown in teardown for map-e and lw6o4 map interfaces types
in order to suppress the trace "wan6_4 (6652): Interface wan6_4_ not found"
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Wed, 11 Jan 2017 18:47:33 +0000 (19:47 +0100)]
Revert the recent dependency and metadata scanning rework
This reverts the following commits:
fbe522d1204149b6c128d55e360bfc15fa8258e1
278ad007ee03c4455c3507322e34b0e3e6ec050d
863888e44f7a1fb1675a2e7a2eaabfec3561d2a2
96daf6352f6e04bc22789466cb5409b93fbec191
cfd83555fc4f0bab18a26f6812da18e64df46ff3
This seems to trigger some mconf bugs when built with all feeds
packages, so I will try to find a less intrusive solution before the
release.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 17:06:06 +0000 (18:06 +0100)]
comgt: allow build without USB_SUPPORT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 17:05:38 +0000 (18:05 +0100)]
umbim: allow build without USB_SUPPORT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 17:05:16 +0000 (18:05 +0100)]
uqmi: allow build without USB_SUPPORT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 17:04:18 +0000 (18:04 +0100)]
mountd: allow build without USB_SUPPORT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 17:22:56 +0000 (18:22 +0100)]
scripts/package-metadata.pl: fix overriding conditional dependencies with conditional select
Conditional dependencies use the '(!cond) || dep' syntax, whereas
conditional select uses 'dep if cond'.
Add an extra check to suppress emitting a conditional if an equal
conditional select already exists.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 15:25:32 +0000 (16:25 +0100)]
arc770: build dtb files in Image/Prepare so that they are available for Device/*
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 15:25:48 +0000 (16:25 +0100)]
archs38: build dtb files in Image/Prepare so that they are available for Device/*
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Wed, 11 Jan 2017 14:21:13 +0000 (15:21 +0100)]
bcm53xx: backport upstream bcm53xx spi driver changes
One replaces our local patch and another is just for keeping driver in
sync (license change).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Wed, 11 Jan 2017 13:55:45 +0000 (14:55 +0100)]
mvebu: work around an ethernet tx scheduling fairness issue
The hardware queue scheduling is apparently configured with fixed
priorities, which creates a nasty fairness issue where traffic from one
CPU can starve traffic from all other CPUs.
Work around this issue by forcing all tx packets to go through one CPU,
until this issue is fixed properly.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 13:03:46 +0000 (14:03 +0100)]
kirkwood: only add UBI EOF markers for devices that need it
Fixes issues where the second-stage u-boot already uses UBI.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 8 Jan 2017 13:26:57 +0000 (14:26 +0100)]
procd: add support for overriding the tar sysupgrade board name
Useful for providing images that work for multiple devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 8 Jan 2017 12:45:02 +0000 (13:45 +0100)]
ar71xx: disable sub-page writes on routerboard nand drivers
They seem to fail in tests using UBI, and are not used by yaffs2
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 17:15:39 +0000 (18:15 +0100)]
kernel: remove linux 4.1 support
The only target still referencing it is omap24xx, and it is marked as
broken.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 7 Jan 2017 20:00:47 +0000 (21:00 +0100)]
ar71xx: fix legacy image build error
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 10:20:25 +0000 (11:20 +0100)]
arc770: fix parallel build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 10:17:13 +0000 (11:17 +0100)]
archs38: fix parallel build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 09:42:04 +0000 (10:42 +0100)]
ar71xx: fix RB4xx CPLD SPI device mode setup
Commit
af79fdbe4af3 changed the code to use tx_nbits for dual SPI tx
transfers, however the SPI stack only allows this when the device mode
includes the relevant bit as well
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 11 Jan 2017 11:26:27 +0000 (12:26 +0100)]
ar71xx: fix RB4xx SPI driver mode bits
Accept SPI_TX_DUAL in device mode to fix the CPLD driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Kabuli Chana [Tue, 10 Jan 2017 16:46:24 +0000 (09:46 -0700)]
mvebu: update mwlwifi driver to version 10.3.2.0-
20170110
Improves automatic channel section support.
Tested on AC (mamba) and ACM (rango).
Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
[Jo-Philipp Wich: reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Tue, 27 Dec 2016 23:23:00 +0000 (00:23 +0100)]
kernel: backport a MIPS SMP icache flush fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Wed, 11 Jan 2017 08:53:44 +0000 (09:53 +0100)]
kernel: update bcm47xxpart failsafe partition patches
V2 using helper function was sent for upstream kernel
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Sujith Manoharan [Wed, 11 Jan 2017 02:09:22 +0000 (07:39 +0530)]
wpa_supplicant: Fix mesh encryption config
wpa_supplicant allows only SAE as the key management
type for mesh mode. The recent key_mgmt rework unconditionally
added WPA-PSK - this breaks interface bringup and wpa_s
throws this error message:
Line 10: key_mgmt for mesh network should be open or SAE
Line 10: failed to parse network block.
Failed to read or parse configuration '/var/run/wpa_supplicant-wlan0.conf
Fix this by making sure that only SAE is used for mesh.
Signed-off-by: Sujith Manoharan <m.sujith@gmail.com>
Jo-Philipp Wich [Wed, 11 Jan 2017 02:44:51 +0000 (03:44 +0100)]
gettext-full: avoid using iconv for host builds
The gettext-full host build might pick up iconv-stub host build headers
during the build, leading to stray linker errors with unresolved references
to libiconv_open(), libiconv() and libiconv_close().
Since we're not needing iconv support on the host, pass the appropriate
cache variables to configure to prevent detection and linking of iconv.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 11 Jan 2017 02:41:10 +0000 (03:41 +0100)]
tools: cmake: link librt if needed (FS#381)
Patch cmakes cmcurl component to unconditionally link librt when we discover
a clock_gettime() symbol in -lrt.
This is required to sucessfully link LibreSSL's libcrypto which might or
might not reqauire librt.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 11 Jan 2017 01:43:04 +0000 (02:43 +0100)]
tools: mkimage: pass crypto libraries through HOST_LOADLIBES (FS#381)
Since linker argument order is significant on modern host compilers, pass
the required libcrypto libraries through the HOST_LOADLIBES variable in
order to ensure proper order of the final linker command line.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Matthias Schiffer [Tue, 10 Jan 2017 21:10:59 +0000 (22:10 +0100)]
tools: libressl: always build as PIC
Fixes link errors for host packages like ruby like the following:
/usr/bin/ld: .../staging_dir/host/lib/libcrypto.a(libcrypto_la-md5_dgst.o):
relocation R_X86_64_PC32 against symbol `memcpy@@GLIBC_2.14' can not be used when making a shared object; recompile with -fPIC
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Matthias Schiffer [Tue, 10 Jan 2017 17:43:57 +0000 (18:43 +0100)]
package: replace $(STAGING_DIR)/host with $(STAGING_DIR_HOSTPKG)
Cleanup to prepare for changing STAGING_DIR_HOSTPKG. The actual change of
STAGING_DIR_HOSTPKG (i.e., moving the host packages back into a common, not
target-specific directory) will be done after the first LEDE release, but
the cleanup will also be useful for projects like Gluon.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Jo-Philipp Wich [Tue, 10 Jan 2017 21:02:22 +0000 (22:02 +0100)]
kernel: add missing config symbols
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Tue, 10 Jan 2017 16:40:19 +0000 (17:40 +0100)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Tue, 10 Jan 2017 16:18:01 +0000 (17:18 +0100)]
mac80211: pending brcmfmac patches cleaning channels management
They prepare brcmfmac for using wiphy_read_of_freq_limits.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 10 Jan 2017 14:51:51 +0000 (15:51 +0100)]
mac80211: rename b43 patches to make more space
Just 6 patches were using 80*, 81*, 82* and 84* prefixes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Jo-Philipp Wich [Tue, 10 Jan 2017 15:25:10 +0000 (16:25 +0100)]
build: scan.mk: consider KernelPackage pattern as well
The removal of the ".+Package" pattern in scan.mk also caused the build
system to skip over Makefiles defining only kmods. Adjust the grep pattern
to consider packages with "call KernelPackage" signatures as well.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
John Crispin [Tue, 10 Jan 2017 12:38:53 +0000 (13:38 +0100)]
procd: update mirror hash
Signed-off-by: John Crispin <john@phrozen.org>
Felix Fietkau [Tue, 10 Jan 2017 14:44:43 +0000 (15:44 +0100)]
kernel: remove gpiommc patches / driver
This code was marked as incompatible to Linux 4.4 well over a year ago
and nobody cared, and now it's breaking builds.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Tue, 10 Jan 2017 14:12:04 +0000 (15:12 +0100)]
kernel: add pending bcm47xxpart support for failsafe TRX partition
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 10 Jan 2017 13:50:44 +0000 (14:50 +0100)]
kernel: update spi-nor.h include fix with upstream accepted version
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 10 Jan 2017 13:48:44 +0000 (14:48 +0100)]
kernel: rename bcm47xxpart patches to fit more of them
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Jo-Philipp Wich [Tue, 10 Jan 2017 14:12:21 +0000 (15:12 +0100)]
build: scan.mk: remove overlay broad grep pattern
Commit
af0b91c "allow scan.mk to find python packages introduced in [8639]"
added some special casing to scan.mk to accomodate some nonstandard python
packages.
Nowadays this pattern is not needed anymore and produces false positives
when using the LEDE source repository as feed within the SDK since the
metadata scanning wrongly picks up target/imagebuilder/Makefile as package,
leading to an "ERROR: please fix feeds/base/target/imagebuilder/Makefile"
message.
Remove the now uneeded pattern to fix such stray errors during metadata
scanning.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Mon, 9 Jan 2017 16:55:27 +0000 (17:55 +0100)]
kernel: remove DEVTMPFS platform overrides
Those options are handled via top-level menuconfig instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 9 Jan 2017 16:51:54 +0000 (17:51 +0100)]
kernel: remove DEVMEM/DEVKMEM platform overrides
Those options are handled via top-level menuconfig instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Pavel Kubelun [Wed, 21 Dec 2016 12:41:19 +0000 (15:41 +0300)]
ath10k-firmware: update board data for qca9984
Current board-2.bin file for qca9984 in Kvalo's repo is from branch
10.4-3.2, while board-2.bin file in code-aurora repo is newer and
corresponds to the branch 10.4-3.3, the same as recently updated firmware.
Considering that it's better to have all parts from the same branch
we are updating board-2.bin as well.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Felix Fietkau [Tue, 10 Jan 2017 12:33:38 +0000 (13:33 +0100)]
kernel: drop kmod-i2c-ibm-iic
If any of the ppc4xx targets are restored, this should be built into the
kernel instead.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 12:26:33 +0000 (13:26 +0100)]
kernel: remove omap24xx specific kernel module packages
If the target is ever restored, those drivers should be built into the
kernel instead.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 12:12:31 +0000 (13:12 +0100)]
omap: build various core drivers into the kernel instead of packaging them
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 12:23:49 +0000 (13:23 +0100)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 11:58:01 +0000 (12:58 +0100)]
kernel: simplify dependencies for kmod-via-velocity
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 11:55:27 +0000 (12:55 +0100)]
kernel: drop crypto-hw-ppc4xx
If any of the ppc4xx targets are restored, this should be built into the
kernel instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 12:02:33 +0000 (13:02 +0100)]
opkg: drop S/MIME support
It has never been used by default (due to being too bloated), and it is
properly replaced by usign (which has been the default for a long time
now).
Remove this feature to simplify the build system
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 11:34:01 +0000 (12:34 +0100)]
mpc85xx: build i2c support into the kernel instead of packaging it separately
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 11:26:28 +0000 (12:26 +0100)]
mpc85xx: build usb support into the kernel instead of packaging it separately
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 11:20:35 +0000 (12:20 +0100)]
kernel: remove kmod-gianfar, it is already built into the kernel
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 11:16:29 +0000 (12:16 +0100)]
kernel: remove kmod-ata-imx, it is already built into the kernel
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stijn Tintel [Mon, 9 Jan 2017 15:54:51 +0000 (16:54 +0100)]
lldpd: take over maintainership
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Stijn Tintel [Thu, 5 Jan 2017 12:05:57 +0000 (13:05 +0100)]
lldpd: add Net-SNMP AgentX support
Enabling this makes it possible to query LLDP neighbors via SNMP.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Stijn Tintel [Mon, 9 Jan 2017 15:02:21 +0000 (16:02 +0100)]
ar71xx: drop references to madwifi
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Felix Fietkau <nbd@nbd.name>
Stijn Tintel [Mon, 9 Jan 2017 14:54:19 +0000 (15:54 +0100)]
iwinfo: drop references to madwifi
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Stijn Tintel [Thu, 5 Jan 2017 13:16:38 +0000 (14:16 +0100)]
px5g-standalone: provide px5g via PROVIDES
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Tue, 10 Jan 2017 11:48:47 +0000 (12:48 +0100)]
ppc44x: mark as broken
This target has consistently failed builds for a long time and it does
not look like it has any users left, nor any maintainers.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 11:36:48 +0000 (12:36 +0100)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Thu, 5 Jan 2017 14:51:05 +0000 (15:51 +0100)]
build: fix HOST_CONFIGURE_VARS placement
Instead of passing HOST_CONFIGURE_VARS as arguments to the configure script,
pass it as environment variables which brings the logic in line with the
behaviour of package-defaults.mk.
The change is needed since passing environment variables as configure
parameters only works with GNU autoconf which evaluates command line arguments
looking like variable assignments. Doing the same with non-autoconf configure
scripts is not guaranteed to work since such scripts might terminate due to
unknown argument errors.
One example case is the cmake configure script which bails out when called
as "./configure LDFLAGS=..." but not when called as "LDFLAGS=... ./configure".
Also change the SHELL override to CONFIG_SHELL in the default
HOST_CONFIGURE_VARS as the former is not properly propagated through the
various GNU configure invocations since it gets lost when configure re-
executes itself.
A prior attempt to change the variable placement had to be reverted due to
the missing SHELL -> CONFIG_SHELL change, leading to misgenerated libtool
executables in various packages.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Kabuli Chana [Wed, 4 Jan 2017 19:35:39 +0000 (12:35 -0700)]
mvebu: Fix up some leds on this series
correct ports, fix power led on rango, tested mamba,shelby,rango
Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
Jo-Philipp Wich [Tue, 10 Jan 2017 10:37:47 +0000 (11:37 +0100)]
build: rework library bundling
Rework the bundle-libraries.sh implementation to use a more robust approach
for executing host binaries through the shipped ELF loader and libraries.
The previous approach relied on symlinks pointing to a wrapper script which
caused various issues, especially with multicall binaries as the original
argv[0] name was not preserved through the ld.so invocation. Another down-
side was the fact that the actual binaries got moved into another directory
which caused executables to fail looking up resources with paths relative
to the executable location.
The new library wrapper implements the following improvements:
- Instead of symlinks pointing to a common wrapper, each ELF executable
is now replaced by a unqiue shell script which retains the original
program name getting called
- Instead of letting ld.so invoke the ELF executable directly, launch
the final ELF binary through a helper program which fixes up the argv[0]
argument for the target program
- Support sharing a common location for the bundled libraries instead of
having one copy in each directory containing wrapped binaries
Finally modify the SDK build to wrap the staging_dir and toolchain binaries
which allows to use the SDK on systems with a different glibc version.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 10 Jan 2017 10:09:56 +0000 (11:09 +0100)]
mtd-utils: mark as nonshared
Since mtd-utils embeds ubi-utils and ubi-utils depends on @NAND_SUPPORT, we
cannot share this package among targets as the SDK processing the package is
not guaranteed to claim NAND_SUPPORT.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Tue, 10 Jan 2017 10:57:57 +0000 (11:57 +0100)]
kernel: move the gateworks system controller driver to an out-of-tree package
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:41:14 +0000 (10:41 +0100)]
mpc85xx: enable the crypto acceleration driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:39:30 +0000 (10:39 +0100)]
imx6: enable the crypto acceleration driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:23:30 +0000 (10:23 +0100)]
kernel: fix kmod-w1-master-mxc dependency
The kernel config symbol is not selectable on mxs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:20:52 +0000 (10:20 +0100)]
kernel: fix dwc2 gadget dependency
Use USB_GADGET_SUPPORT feature flag instead of hardcoding the target
list.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:19:31 +0000 (10:19 +0100)]
mxs: remove modules.mk, select drivers in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:14:49 +0000 (10:14 +0100)]
mxs: remove obsolete kernel package depending on linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:13:30 +0000 (10:13 +0100)]
mxs: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:10:13 +0000 (10:10 +0100)]
imx6: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 09:02:36 +0000 (10:02 +0100)]
imx6: remove kmod-thermal-imx, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 08:59:10 +0000 (09:59 +0100)]
imx6: build support for the ventana ethernet expansion board into the kernel instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 10 Jan 2017 08:55:42 +0000 (09:55 +0100)]
imx6: enable the Freescale SNVS RTC driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 5 Jan 2017 23:28:51 +0000 (00:28 +0100)]
build: remove obsolete parallel build related options
Always use the main make jobserver, which has been the default for ages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
John Crispin [Tue, 10 Jan 2017 08:26:43 +0000 (09:26 +0100)]
procd: update to latest git HEAD
f706903 ujail: add basic /dev files
Signed-off-by: John Crispin <john@phrozen.org>
Florian Fainelli [Sun, 1 Jan 2017 00:13:36 +0000 (16:13 -0800)]
malta: Fix README file examples
The example command-lines used references and paths from an older directory
structure.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Daniel Engberg [Tue, 3 Jan 2017 21:06:36 +0000 (22:06 +0100)]
libnl: Update to 3.2.29
Update libnl to 3.2.29
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Antonis Kanouras [Mon, 9 Jan 2017 07:05:52 +0000 (09:05 +0200)]
ramips: Fix VLAN limits for MT7621 GSW
Without this patch swconfig will only allow setting up a total of 16
VLANs, with VLAN ID range of 0-15.
Tested on ubnt-erx.
Signed-off-by: Antonis Kanouras <antonis@metadosis.eu>
Daniel Engberg [Wed, 4 Jan 2017 00:11:24 +0000 (01:11 +0100)]
usbutils: Update usb.ids database to 2016.10.13
Update usb.ids database to 2016.10.13
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Pavel Kubelun [Thu, 22 Dec 2016 09:17:25 +0000 (12:17 +0300)]
ipq806x: fix pvs1_bin voltage in ipq8065 DT
Fixing pvs1 bin voltage as found in GPL tarball and Qualcomm SDK.
Also adjusting smb208_s2a/b minimum voltage to reflect lowest value in pvs table.
Current ipq8065 devices in LEDE choose (based on eFuse data) pvs bin n4, that has
correct values in DT, but in future a new device may choose n1 or n6.
Without this change n1 is semi-correct and n6 is not available, because OPP driver
disregards bins with voltage values that regulator cannot supply.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Hauke Mehrtens [Mon, 9 Jan 2017 22:56:05 +0000 (23:56 +0100)]
cyassl: update to wolfssl version 3.10.0
This fixes a low level security vulnerability.
Deactivate MIPS16 support, crypto code gets much slower with MIPS16.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 6 Jan 2017 17:37:40 +0000 (18:37 +0100)]
lantiq: update USB controller initialization
This adds USB initialization fixes for Danube, Amazon SE and xrx300 and
should fix the clock on at least Danube which hopefully closes FS#351.
The xrx200 usb driver now uses more memory for the dwc2 fifos, this was
increased in the chip compared to ar9.
This is based in part on the vendor documentation and the vendor code
base as a reference.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 30 Dec 2016 12:11:34 +0000 (13:11 +0100)]
lantiq: fix dma locking problems with SMP
The DMA controller used only local locks, which will not lock the
section against other CPUs, fix this by using spin locks.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sun, 8 Jan 2017 18:00:24 +0000 (19:00 +0100)]
tools: remove obsolete yaffs tool
This was added a long time ago and was apparently never used
Signed-off-by: Felix Fietkau <nbd@nbd.name>