John Crispin [Fri, 5 Dec 2014 08:58:06 +0000 (08:58 +0000)]
octeon: sysupgrade: fix test for rootfs device
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43522
John Crispin [Fri, 5 Dec 2014 00:20:50 +0000 (00:20 +0000)]
oxnas: switch back to kernel 3.14
3.18 still got problems with stuck reboots if rootfs is ubifs...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43521
John Crispin [Fri, 5 Dec 2014 00:20:41 +0000 (00:20 +0000)]
oxnas: re-add support for kernel 3.14
This reverts commit
c81ddddde5fd193802d511b42eb7b108aac17136 on
https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git
which removed patches and config for 3.14.
[arm_introduce-dma-fiq-irq-broadcast patch was renamed to match 3.18]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43520
John Crispin [Fri, 5 Dec 2014 00:20:10 +0000 (00:20 +0000)]
octeon: add support for 3.18 kernel
Runtime tested on Ubiquiti EdgeRouter Lite.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43519
John Crispin [Fri, 5 Dec 2014 00:19:59 +0000 (00:19 +0000)]
octeon: sysupgrade: support config restore
SVN-Revision: 43518
John Crispin [Fri, 5 Dec 2014 00:19:46 +0000 (00:19 +0000)]
octeon: sysupgrade: get rootfsdev from kernel cmdline
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43517
John Crispin [Fri, 5 Dec 2014 00:19:40 +0000 (00:19 +0000)]
amazon: R.I.P.
its been broken for 2 1/2 years
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43516
John Crispin [Fri, 5 Dec 2014 00:19:28 +0000 (00:19 +0000)]
kernel/modules: remove unused variable
https://dev.openwrt.org/ticket/18472
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43515
John Crispin [Wed, 3 Dec 2014 20:22:42 +0000 (20:22 +0000)]
ralink: mt7621 is a 1004Kc
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 43514
John Crispin [Wed, 3 Dec 2014 20:22:37 +0000 (20:22 +0000)]
procd: more nand takeover fixes
if the initramfs kernel and payload were flashed in one block, the payload might not be at the start of the ubi partition due to bad blocks inside the kernel partition.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43513
John Crispin [Wed, 3 Dec 2014 20:22:32 +0000 (20:22 +0000)]
mtd: make the dump commnd honour the -o option
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43512
Felix Fietkau [Wed, 3 Dec 2014 18:17:17 +0000 (18:17 +0000)]
kernel: add missing null pointer check for mips dma ops inline patch on 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43511
John Crispin [Wed, 3 Dec 2014 16:05:23 +0000 (16:05 +0000)]
uboot-envtools: use environment stored in UBI also for KD20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43510
John Crispin [Wed, 3 Dec 2014 16:05:17 +0000 (16:05 +0000)]
uboot-oxnas: adjust digtial drive strength of IC+ phy
This is what the vendor bootloader does on KD20.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43509
John Crispin [Wed, 3 Dec 2014 16:05:11 +0000 (16:05 +0000)]
uboot-oxnas: re-add IC+ phy driver
KD20 got an IC+ phy, without the driver the phy is not properly
initialized resulting in ethernet not working unless being already
initialized by the vendor loader.
upstream commit
368b4d2b49bbbf379d9334747fbbd2aaaafe4356
drivers: net: remove dead drivers
removed icplus.c due to the lack of in-tree users.
Partially revert that commit adding back the IC+ driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43508
John Crispin [Wed, 3 Dec 2014 16:05:06 +0000 (16:05 +0000)]
kernel: make the ubi attach patch check for a valid ubi magic rather than a tar magic
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43507
John Crispin [Wed, 3 Dec 2014 14:32:38 +0000 (14:32 +0000)]
kernel: make ubi auto-attach check for a tar file magic
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43506
John Crispin [Wed, 3 Dec 2014 14:32:32 +0000 (14:32 +0000)]
procd: firstboot nand/ubi takeover support
it is now possible to flash a initramfs kernel and a sysupgrade tar file inside the ubi partition. on first boot, the takeover script will find the tar file, extract and finally sysupgrade it. this allows us to flash owrt/ubi images in a 2 phase setup using ODM webuis that are not ubi aware. this is needed by some mediatek and brokencom devices.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43505
John Crispin [Wed, 3 Dec 2014 09:17:28 +0000 (09:17 +0000)]
uqmi: Add --delete-message for deleting SMS messages
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43504
John Crispin [Tue, 2 Dec 2014 19:28:23 +0000 (19:28 +0000)]
mtd: make the mtd dump call run properly on nand flash
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43503
Felix Fietkau [Tue, 2 Dec 2014 19:26:45 +0000 (19:26 +0000)]
kernel/modules: package xhci for kernel>=3.18
xhci-hcd was split into xhci-pci and xhci-platform since 3.18
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43502
John Crispin [Tue, 2 Dec 2014 18:27:54 +0000 (18:27 +0000)]
gemini: update ethernet driver, register ethernet on nas4220 board
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43501
John Crispin [Tue, 2 Dec 2014 18:27:49 +0000 (18:27 +0000)]
mtd: add ability to dump a mtd device
this can be used on nand flashes and will skip bad blocks and run ecc on the
read data before dumping it.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43500
John Crispin [Tue, 2 Dec 2014 15:25:37 +0000 (15:25 +0000)]
uboot-oxnas: bump to U-Boot 2014.10
A few trivial changes were needed to adapt to upstream framework changes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43499
John Crispin [Tue, 2 Dec 2014 15:25:28 +0000 (15:25 +0000)]
oxnas: switch CRC32 implementation to SLICEBY8
similar to what was observed on kirkwood this significantly accelerates
btrfs write operations.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43498
John Crispin [Tue, 2 Dec 2014 15:25:14 +0000 (15:25 +0000)]
oxnas/kd20: add usb-storage to default package set
KD20 got a built-in card-reader wired to the USB-3 root-hub.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43497
John Crispin [Tue, 2 Dec 2014 15:25:09 +0000 (15:25 +0000)]
oxnas/kd20: use gpio-beeper
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43496
John Crispin [Tue, 2 Dec 2014 15:25:03 +0000 (15:25 +0000)]
kernel/modules: package gpio-beeper
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43495
John Crispin [Tue, 2 Dec 2014 15:23:37 +0000 (15:23 +0000)]
au1000: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43494
John Crispin [Tue, 2 Dec 2014 15:21:50 +0000 (15:21 +0000)]
opkg: the PKG_UPGRADE env was not set properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43493
John Crispin [Tue, 2 Dec 2014 13:16:06 +0000 (13:16 +0000)]
procd: drop the zram dependencies, theu caused a recursive deps warning
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43492
Felix Fietkau [Tue, 2 Dec 2014 13:14:59 +0000 (13:14 +0000)]
realview: refresh kernel patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43491
John Crispin [Tue, 2 Dec 2014 12:41:15 +0000 (12:41 +0000)]
procd: reintroduce /sys/fs/cgroup mount
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43490
John Crispin [Tue, 2 Dec 2014 11:13:28 +0000 (11:13 +0000)]
procd: add support for zram compressed /tmp
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43489
John Crispin [Mon, 1 Dec 2014 21:45:18 +0000 (21:45 +0000)]
realview: fix up the phyoffset patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43488
John Crispin [Mon, 1 Dec 2014 21:30:40 +0000 (21:30 +0000)]
kirkwood: enable mvsw6171 switch driver on EA4500
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43487
John Crispin [Mon, 1 Dec 2014 21:30:35 +0000 (21:30 +0000)]
kernel: add driver for Marvell
88E6171 switch
This is a swconfig driver for the Marvell
88E6171 switch,
which is a 7-port GigE switch with two CPU ports and 64
802.1q VLANs.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43486
Felix Fietkau [Mon, 1 Dec 2014 21:10:42 +0000 (21:10 +0000)]
fstools: update to the latest version, fixes sysupgrade on linux 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43485
Felix Fietkau [Mon, 1 Dec 2014 20:01:05 +0000 (20:01 +0000)]
ath10k: init devices synchronously to fix wifi detection at boot
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43484
Felix Fietkau [Mon, 1 Dec 2014 19:49:59 +0000 (19:49 +0000)]
openvpn: update to 2.3.6, fixes CVE-2014-8104
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43482
John Crispin [Mon, 1 Dec 2014 18:46:29 +0000 (18:46 +0000)]
malta: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43481
John Crispin [Mon, 1 Dec 2014 18:46:23 +0000 (18:46 +0000)]
fstools: make the block tool ignore case when comparing uuid strings
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43480
Felix Fietkau [Mon, 1 Dec 2014 17:38:54 +0000 (17:38 +0000)]
kernel: update 3.18 to rc7
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43479
John Crispin [Mon, 1 Dec 2014 16:50:43 +0000 (16:50 +0000)]
util-linux: fix more missing dependencies introduced by r43459
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43478
John Crispin [Mon, 1 Dec 2014 16:23:55 +0000 (16:23 +0000)]
uqmi: fix SEGFAULT on reading Unicode sms messages
Added complementary blobmsg_close_table() before returning from function
on error.
Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com>
SVN-Revision: 43477
John Crispin [Mon, 1 Dec 2014 16:18:15 +0000 (16:18 +0000)]
util-linux: fix missing dependency introduced by r43459
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43476
John Crispin [Mon, 1 Dec 2014 16:15:37 +0000 (16:15 +0000)]
oxnas: change visible board name
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43475
John Crispin [Mon, 1 Dec 2014 16:15:30 +0000 (16:15 +0000)]
oxnas: ehci: rename vendor prefix plxtch to plxtech
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43474
John Crispin [Mon, 1 Dec 2014 16:15:20 +0000 (16:15 +0000)]
hostapd: improve 802.1x dynamic vlan support with bridge names
In r41872 and r42787 Dynamic VLAN support was reintroduced, but the vlan_bridge
parameter is not read while setting up the config, so the default is used which
is undesirable for some uses.
Signed-off-by: Ben Franske <ben.mm@franske.com>
SVN-Revision: 43473
John Crispin [Mon, 1 Dec 2014 16:15:13 +0000 (16:15 +0000)]
base-files: default_postinst() - create user:group first (resend)
create user:group before running postinst-pkg. the postinst hook might require
the user:group to already exist.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 43472
John Crispin [Mon, 1 Dec 2014 16:15:08 +0000 (16:15 +0000)]
ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43471
John Crispin [Mon, 1 Dec 2014 16:15:02 +0000 (16:15 +0000)]
ar8216: factor out mii_lo_first to ar8xxx_chip
Factor out mii_lo_first to ar8xxx_chip.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43470
John Crispin [Mon, 1 Dec 2014 16:14:54 +0000 (16:14 +0000)]
ar8216: factor out chip-specific data structures from ar8xxx_priv
Factor out chip-specific data structures from ar8xxx_priv.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43469
John Crispin [Mon, 1 Dec 2014 16:14:43 +0000 (16:14 +0000)]
ar8216: factor out set_mirror_regs to ar8xxx_chip
Factor out set_mirror_regs to ar8xxx_chip.
Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43468
John Crispin [Mon, 1 Dec 2014 16:14:39 +0000 (16:14 +0000)]
ar8216: factor out mib_func to ar8xxx_chip
Factor out mib_func to ar8xxx_chip. Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43467
John Crispin [Mon, 1 Dec 2014 16:14:32 +0000 (16:14 +0000)]
ar8216: factor out info whether switch should be configured at probe stage to ar8xxx_chip
Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43466
John Crispin [Mon, 1 Dec 2014 16:14:26 +0000 (16:14 +0000)]
realview: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43465
John Crispin [Mon, 1 Dec 2014 16:14:21 +0000 (16:14 +0000)]
ixp4xx: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43464
John Crispin [Mon, 1 Dec 2014 16:14:07 +0000 (16:14 +0000)]
au1000: add 3.14 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43463
John Crispin [Mon, 1 Dec 2014 16:14:02 +0000 (16:14 +0000)]
ar71xx: Add build profile for the gl-inet 6416A and 6408A
Patch to add the buildprofile for the GL-Init-6408A-v1 and the GL-Inet-6416A-v1
Both devices are identical, only difference is one comes with 8MB flash and
the other with 16MB flash
Official website: http://www.gl-inet.com/w/?page_id=241&lang=en
Comprehensive list of specs: https://revspace.nl/GL-Inet
Signed-off-by: Martijn Zilverschoon <martijn@friedzombie.com>
SVN-Revision: 43462
Jonas Gorski [Mon, 1 Dec 2014 13:27:26 +0000 (13:27 +0000)]
brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43461
Jonas Gorski [Mon, 1 Dec 2014 13:27:06 +0000 (13:27 +0000)]
toolchain-headers: also copy asm-eva.h for mips(el) for 3.15+
Kernel 3.15's asm.h includes eva-asm.h, so copy it also, else lzma-loader
won't compile due to a missing include.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43460
Luka Perkov [Mon, 1 Dec 2014 12:40:06 +0000 (12:40 +0000)]
util-linux: package libsmartcols
Packages fdisk and lsblk were missing dependency for libsmartcols.so.1
Add package for libsmartcols and add dependency from fdisk and lsblk.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43459
Felix Fietkau [Mon, 1 Dec 2014 11:07:30 +0000 (11:07 +0000)]
mkimage: remove check for miscompiled __weak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43458
Jonas Gorski [Mon, 1 Dec 2014 00:52:07 +0000 (00:52 +0000)]
brcm63xx: register interrupt-controllers through DT when possible
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43457
Jonas Gorski [Mon, 1 Dec 2014 00:51:56 +0000 (00:51 +0000)]
brcm63xx: dtsi: add missing ranges properity to ubus nodes
Allows nodes behind it to be mapped.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43456
Jonas Gorski [Mon, 1 Dec 2014 00:51:53 +0000 (00:51 +0000)]
brcm63xx: dtsi: add missing properties to cpu nodes
Mark them as cpu nodes and add the addresses.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43455
Jonas Gorski [Mon, 1 Dec 2014 00:51:51 +0000 (00:51 +0000)]
brcm63xx: convert to irq domain
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43454
Jonas Gorski [Mon, 1 Dec 2014 00:51:24 +0000 (00:51 +0000)]
brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43453
Jonas Gorski [Mon, 1 Dec 2014 00:51:17 +0000 (00:51 +0000)]
brcm63xx: add DT support for DSL-2650U
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43452
Jonas Gorski [Mon, 1 Dec 2014 00:51:12 +0000 (00:51 +0000)]
brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43451
Jonas Gorski [Mon, 1 Dec 2014 00:51:08 +0000 (00:51 +0000)]
brcm63xx: Add DT support for F@ST2504n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43450
Jonas Gorski [Mon, 1 Dec 2014 00:51:04 +0000 (00:51 +0000)]
brcm63xx: add DT support for F@ST2704V2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43449
Jonas Gorski [Mon, 1 Dec 2014 00:50:59 +0000 (00:50 +0000)]
brcm63xx: add DT support for F@ST2604
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43448
Jonas Gorski [Mon, 1 Dec 2014 00:50:56 +0000 (00:50 +0000)]
brcm63xx: add DT support for F@ST2404
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43447
Felix Fietkau [Sun, 30 Nov 2014 22:22:24 +0000 (22:22 +0000)]
toolchain: uClibc: fix compile with full language support enabled (fixes #13095)
When building with CONFIG_BUILD_NLS=y, uClibc fails to compile with following
message (or similar, according to https://dev.openwrt.org/ticket/13095):
-snip-
...
Warning: adding UNDEFINED entry for ar_AE
Warning: adding UNDEFINED entry for am_ET
Warning: adding UNDEFINED entry for af_ZA
grep "^#define" extra/locale/locale_tables.h > extra/locale/lt_defines.h
grep "^#define __lc" extra/locale/locale_collate.h >> extra/locale/lt_defines.h
gcc extra/locale/gen_wctype.c -o extra/locale/gen_wctype -Os -Wall -D__UCLIBC_GEN_LOCALE -I./
extra/locale/gen_wctype.c: In function 'main':
extra/locale/gen_wctype.c:684:2: warning: #warning fix the upper bound on the upper/lower tables... save 200 bytes or so [-Wcpp]
for locale in en_US en_GB; do \
extra/locale/gen_wctype $locale > extra/locale/wctables.h || \
extra/locale/gen_wctype $locale.UTF-8 > extra/locale/wctables.h || \
extra/locale/gen_wctype $locale.iso8859-1 > extra/locale/wctables.h && break; \
done
make[4]: *** [extra/locale/wctables.h] Error 1
-snap-
This seems to also depend on the host system used, e.g. running a fresh
checkout on a Debian 7.6 system triggered this error, while running the
very same stuff on an Ubuntu 12.10 Quantal Quetzal does not trigger it.
This is the configuration I used:
-snip-
buildbot@buildbot:~/openwrt-nls.git$ scripts/diffconfig.sh
CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_Default=y
CONFIG_DEVEL=y
CONFIG_BUILD_NLS=y
CONFIG_DOWNLOAD_FOLDER="/srv/downloads/downloads"
-snap-
In the ticket mentioned above, a patch is referenced which solves this issue.
Note, that this issue is also present on 14.07.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43446
Felix Fietkau [Sun, 30 Nov 2014 22:22:14 +0000 (22:22 +0000)]
toolchain: uClibc: fix build with CONFIG_BUILD_NLS selected
Without this patch, selecting "Compile with full language support"
results in the following question during build:
...
Locale Support (UCLIBC_HAS_LOCALE) [Y/n/?] y
Locale data
> 1. All locales (UCLIBC_BUILD_ALL_LOCALE) (NEW)
2. Only selected locales (UCLIBC_BUILD_MINIMAL_LOCALE) (NEW)
3. Use Pre-generated Locale Data (UCLIBC_PREGENERATED_LOCALE_DATA) (NEW)
choice[1-3]:
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43445
Luka Perkov [Sun, 30 Nov 2014 22:12:20 +0000 (22:12 +0000)]
kernel: add missing config symbol for 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43444
Luka Perkov [Sun, 30 Nov 2014 22:11:09 +0000 (22:11 +0000)]
util-linux: update to 2.25.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43443
Felix Fietkau [Sun, 30 Nov 2014 21:05:17 +0000 (21:05 +0000)]
ath5k: fix hardware queue index assignment
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43442
Felix Fietkau [Sun, 30 Nov 2014 20:29:10 +0000 (20:29 +0000)]
tools/mkimage: fix build errors (#18445)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43441
Felix Fietkau [Sun, 30 Nov 2014 20:12:07 +0000 (20:12 +0000)]
gengetopt: fix parallel build issues (#18442)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43440
Felix Fietkau [Sun, 30 Nov 2014 19:41:59 +0000 (19:41 +0000)]
ath9k: fix hardware tx queue allocation order
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43438
Imre Kaloz [Sun, 30 Nov 2014 09:51:48 +0000 (09:51 +0000)]
add gengetopt
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43437
Luka Perkov [Sun, 30 Nov 2014 03:55:44 +0000 (03:55 +0000)]
uboot-kirkwood: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43436
Luka Perkov [Sun, 30 Nov 2014 03:51:43 +0000 (03:51 +0000)]
malta: add more 3.14 kernel symbols
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43435
Luka Perkov [Sun, 30 Nov 2014 01:20:38 +0000 (01:20 +0000)]
kirkwood: change CRC32 implementation to CRC32_SLICEBY8
At least on my Iomega ix2-200 system, this makes btrfs writes about 30% faster.
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43434
Luka Perkov [Sun, 30 Nov 2014 01:14:17 +0000 (01:14 +0000)]
uboot-envtools: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43433
Luka Perkov [Sun, 30 Nov 2014 01:14:14 +0000 (01:14 +0000)]
kirkwood: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43432
Luka Perkov [Sun, 30 Nov 2014 01:14:12 +0000 (01:14 +0000)]
generic: set CONFIG_GENERIC_NET_UTILS
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43431
Luka Perkov [Sat, 29 Nov 2014 23:45:53 +0000 (23:45 +0000)]
uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43429
Luka Perkov [Sat, 29 Nov 2014 22:43:59 +0000 (22:43 +0000)]
mkimage: update to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43428
Luka Perkov [Sat, 29 Nov 2014 10:30:58 +0000 (10:30 +0000)]
kernel: update 3.14 to 3.14.25
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43427
Luka Perkov [Sat, 29 Nov 2014 10:30:55 +0000 (10:30 +0000)]
malta: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43426
Luka Perkov [Sat, 29 Nov 2014 10:30:52 +0000 (10:30 +0000)]
malta: drop 3.12 config file
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43425
Rafał Miłecki [Fri, 28 Nov 2014 19:13:24 +0000 (19:13 +0000)]
procd: fix typo in nand.sh s/TRX/TAR/
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43423
Luka Perkov [Fri, 28 Nov 2014 17:53:50 +0000 (17:53 +0000)]
x86: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43422
Steven Barth [Fri, 28 Nov 2014 11:41:25 +0000 (11:41 +0000)]
ntp: add hotplug class for ntp-events
Based on a patch by Luiz Angelo Daros de Luca
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43421
Florian Fainelli [Fri, 28 Nov 2014 01:29:51 +0000 (01:29 +0000)]
kernel: 3.18: Fix patch 644 dependency chain
This patch introduces some code that is compiled in whenever
CONFIG_BRIDGE_NETFILTER is built, with the code called from code compiled under
CONFIG_BRIDGE, CONFIG_BRIDGE_IGMP_SNOOPING or CONFIG_BRIDGE_NF_EBTABLES.
Unfortunately, these options aren't setting explicitly the dependency they now
have on CONFIG_BRIDGE_NETFILTER, for obvious reasons for CONFIG_BRIDGE.
However, this is not working really well when CONFIG_BRIDGE_NETFILTER is built
as a module, since code statically compiled will now use a function that is not
in the kernel image, which makes the linker grumpy.
Solve this by removing the option to build CONFIG_BRIDGE_NETFILTER as a module,
and protect our function definition by an IS_BUILTIN instead of a IS_ENABLED
macro. This fixes the issue for CONFIG_BRIDGE and CONFIG_BRIDGE_IGMP_SNOOPING.
Fixing CONFIG_BRIDGE_NF_EBTABLES has to be handled a bit differently, since it
directly references a variable that will not be declared if
CONFIG_BRIDGE_NETFILTER is not set. Protect the variable affectations by an
ifdef to make sure this doesn't happen.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43419
Florian Fainelli [Fri, 28 Nov 2014 01:29:41 +0000 (01:29 +0000)]
devel: import perf from oldpackages
perf was in the oldpackages repository, but it makes more sense to have
it part of the default package set since we build it from the Linux
kernel sources.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43418
projects / librecmc / librecmc.git / log