Felix Fietkau [Fri, 5 Aug 2016 09:02:50 +0000 (11:02 +0200)]
hostapd: remove unused hostapd-common-old package
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 10:21:37 +0000 (12:21 +0200)]
ath9k: improve powersave filter handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 10:21:27 +0000 (12:21 +0200)]
ath9k: improve performance in tx status handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 21:09:55 +0000 (23:09 +0200)]
Revert "kernel: remove long obsolete gpio spi controller driver patch"
This reverts commit
9e62a7668c4085563a907da51a08819c88d04f33.
Felix Fietkau [Thu, 4 Aug 2016 20:55:51 +0000 (22:55 +0200)]
ar71xx: add missing LZO support select for routerboard devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 20:42:28 +0000 (22:42 +0200)]
kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
This provides a good tradeoff across at least 24Kc-74Kc, while also
producing smaller code.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 18:29:45 +0000 (20:29 +0200)]
gcc: add a patch to generate better code with Os on mips
Also happens to reduce compressed code size a bit
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 17:23:47 +0000 (19:23 +0200)]
kernel: mark compression modules as hiddden to obsolete the compressor kconfig hack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 17:19:17 +0000 (19:19 +0200)]
kernel: mark kmod-udptunnel as hiddden to replace the NET_UDP_TUNNEL kconfig hack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 17:12:21 +0000 (19:12 +0200)]
kernel: remove unused morse led trigger driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 17:01:20 +0000 (19:01 +0200)]
kernel: remove long obsolete gpio spi controller driver patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 16:54:16 +0000 (18:54 +0200)]
kernel: remove a long obsolete unlzo decompressor fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 16:41:50 +0000 (18:41 +0200)]
kernel: remove obsolete slab tuning patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 4 Aug 2016 16:18:39 +0000 (18:18 +0200)]
kernel: remove esfq qdisc
It has been obsolete for years now
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Mathias Kresin [Tue, 2 Aug 2016 20:29:31 +0000 (22:29 +0200)]
sysupgrade: unmount filesystems before reboot
sysupgrade immediately reboots after flashing an image and doesn't
allow to unmount filesystems. At least in case the image used for
sysupgrade is stored on a FAT formatted usb flash drive, the following
warning is printed during the next mount of the flash drive:
FAT-fs (sda1): Volume was not properly unmounted. Some data may be
corrupt. Please run fsck.
Although a data corruption during read operations is unlikely, there is
no need to scare the users.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Sergey Ryazanov [Tue, 2 Aug 2016 13:29:44 +0000 (16:29 +0300)]
tools: lzma: reduce copyright noise
Move the copyright printing code to the usage printing function, to
reduce noise from regular execution but preserve information about
the author.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Daniel Golle [Tue, 2 Aug 2016 13:38:46 +0000 (15:38 +0200)]
base-files: remove dead code
/etc/init.d/boot tried to create /dev/root based on the kernel's
cmdline which won't work on any recent targets. Remove that code now
that fstools can detect the mounted rootfs based on
/proc/self/mountinfo and /dev/root was long gone anyway.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Thu, 4 Aug 2016 09:12:27 +0000 (11:12 +0200)]
image: fix per-device rootfs build error when not all opkg package files are found
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Aug 2016 17:55:02 +0000 (19:55 +0200)]
scripts/config: properly handle select on symbols with unmet direct dependencies
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Aug 2016 17:47:34 +0000 (19:47 +0200)]
scripts/config: sync with latest linux upstream
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Aug 2016 15:34:04 +0000 (17:34 +0200)]
kernel: clean up 260-crypto_test_dependencies.patch to get rid of some more kernel bloat
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Aug 2016 15:07:32 +0000 (17:07 +0200)]
kernel: modularize bridge netfilter support a bit further to get rid of some kernel bloat
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Aug 2016 14:38:04 +0000 (16:38 +0200)]
kernel: remove switch driver kmod packages
Targets that need switch drivers should select them in their kernel
config. This prevents some bloat from creeping into targets that don't
need switchdev/dsa
Signed-off-by: Felix Fietkau <nbd@nbd.name>
John Crispin [Wed, 3 Aug 2016 13:29:59 +0000 (15:29 +0200)]
ramips: enable nand support for mt7621
this makes sysupgrade work on the ERX
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Wed, 3 Aug 2016 00:30:12 +0000 (02:30 +0200)]
include/image.mk: allow image code to override uImage name
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 2 Aug 2016 17:48:17 +0000 (19:48 +0200)]
ramips: updated remaining profiles to the new image building code
Signed-off-by: John Crispin <john@phrozen.org>
Lucian Cristian [Sun, 31 Jul 2016 14:59:01 +0000 (17:59 +0300)]
x86: enable CPU frequency scaling
CPU frequency scaling enables the operating system to scale the CPU
frequency up or down in order to save power. CPU frequencies can be
scaled automatically depending on the system load, in response to ACPI
events, or manually by userspace programs.
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Lucian Cristian [Sun, 31 Jul 2016 12:42:53 +0000 (15:42 +0300)]
linux/modules: Add SCH5627 Super I/O chips
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Florian Eckert [Mon, 1 Aug 2016 09:10:42 +0000 (11:10 +0200)]
lantiq: add cpu temperatur sensor driver for xrx200
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
John Crispin [Tue, 2 Aug 2016 07:34:49 +0000 (09:34 +0200)]
rtc-rv5c386a: package does not build inside the SDK
the packages failed to build inside the SDK due to missing header
files.
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 2 Aug 2016 07:31:55 +0000 (09:31 +0200)]
uboot-lantiq: package does not build inside the SDK
the packages failed to build inside the SDK due to missing ethernet
firmware files.
Signed-off-by: John Crispin <john@phrozen.org>
Felix Fietkau [Wed, 3 Aug 2016 12:56:43 +0000 (14:56 +0200)]
build: remove MIPS dsp/dsp2 CPU_SUBTYPE
There does not seem to be any meaningful difference in generated code.
This will save some time and space on snapshot builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Aug 2016 10:22:04 +0000 (12:22 +0200)]
build: move merged package directory from bin/ to staging_dir
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 11:54:40 +0000 (13:54 +0200)]
mkelfimage: remove package, it is a host tool that has been unused for years
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 11:51:13 +0000 (13:51 +0200)]
ar71xx: remove useless minimal/ath5k profiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 11:49:27 +0000 (13:49 +0200)]
uboot-ar71xx: fix default selection for NBG460N/550N/550NH
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 09:14:55 +0000 (11:14 +0200)]
mac80211: fix minor memleak on AP restart / warning on driver unload
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 11:07:46 +0000 (13:07 +0200)]
ath9k: fix sta initialization bug leading to stability issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 06:17:28 +0000 (08:17 +0200)]
omap: remove CONFIG_SND_DEBUG override
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 2 Aug 2016 06:16:44 +0000 (08:16 +0200)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Aug 2016 20:33:29 +0000 (22:33 +0200)]
feeds: switch from github to lede-project.org mirrors
GitHub seems to be a bit unreliable on feeds updates on the buildbot
lately, so hopefully our own mirror will be more reliable than that.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Mon, 1 Aug 2016 20:25:54 +0000 (22:25 +0200)]
gdb: fix build with gcc 4.1.2 as host compiler
The additional warnings are causing compile errors on gcc version 4.1.2
as a host compiler.
cc -c -Wall -Wdeclaration-after-statement -Wpointer-arith
-Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch
-Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement
-Wempty-body -Wmissing-parameter-type -Wold-style-declaration -Wold-
style-definition -Wformat-nonliteral -I. -I. -I./../../include
filter_host.c
cc1: error: unrecognized command line option "-Wempty-body"
cc1: error: unrecognized command line option "-Wmissing-parameter-type"
cc1: error: unrecognized command line option "-Wold-style-declaration"
cc1: error: unrecognized command line option "-Wempty-body"
cc1: error: unrecognized command line option "-Wmissing-parameter-type"
cc1: error: unrecognized command line option "-Wold-style-declaration"
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 1 Aug 2016 19:59:45 +0000 (21:59 +0200)]
scripts: fix remote-gdb with CONFIG_BUILD_SUFFIX
Fix the scripts/remote-gdb script when CONFIG_BUILD_SUFFIX is set.
CONFIG_BUILD_SUFFIX extends the name of the folder build_dir/target*
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Mon, 1 Aug 2016 16:29:23 +0000 (18:29 +0200)]
lantiq: enable missing ath10k firmware for BT Home Hub 5A
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Tue, 26 Jul 2016 13:08:19 +0000 (15:08 +0200)]
build: remove image specific checksum code
Now that we globally calculate sha256sums over the bin/ directory we can remove
the target image specific checksum handling.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 26 Jul 2016 13:05:35 +0000 (15:05 +0200)]
build: add checksum target
Add a new "checksum" make target which generates an sha256sums file over the
image files produced in bin/targets/ and automatically call it during make
world after the package index generation.
The advantage of this new target is that it is guaranteed to run after the
images, the SDK and the ImageBuilder archives have been generated to ensure
that they all end up in the checksum file. Fixes FS#51.
Uses sed to postprocess the OpenSSL digest output into an sha256sum command
compatible format.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sat, 30 Jul 2016 13:43:35 +0000 (15:43 +0200)]
apm821xx: fix IB image building
Change the image build code to generate the DTB files as part of the kernel
build phase in order to fix the image build in the ImageBuilder environment.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Mon, 1 Aug 2016 12:52:13 +0000 (14:52 +0200)]
base-files: increase vm.min_free_kbytes
Network drivers typically allocate memory in atomic context. For that to
be reliable, there needs to be enough free memory. Set the value
heuristically based on the total amount of system RAM.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Aug 2016 11:36:03 +0000 (13:36 +0200)]
kernel: re-enable CONFIG_SND_VERBOSE_PROCFS (FS#66)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
diizzyy [Sun, 31 Jul 2016 20:46:29 +0000 (22:46 +0200)]
ar71xx: Make wget2nand look for LEDE project firmware files
Make wget2nand aware of the new file names
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
dissent1 [Sun, 31 Jul 2016 13:23:42 +0000 (16:23 +0300)]
ipq806x: fix MAC_POWER_SEL for Netgear R7800
Fixes instability/corruption on the ethernet interface connected to port0 on the switch on Netgear R7800 as well.
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Florian Eckert [Fri, 22 Jul 2016 09:04:57 +0000 (11:04 +0200)]
uqmi: add metric option to interface config
It is now possible to add an metric option for the qmi proto in dhcp mode.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Florian Eckert [Fri, 22 Jul 2016 09:33:08 +0000 (11:33 +0200)]
uqmi: fix option ipv6
If option ist not set then ipv6 is still enabled on this Interface.
Check if variable is zero will fix this issue.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
P.Wassi [Tue, 26 Jul 2016 04:45:25 +0000 (06:45 +0200)]
ramips: Rename TP-Link Archer C50 LEDs
Rename LEDs in TP-Link Archer C50 from [manufacturer name]
to [board name] ("tp-link" -> "c50")
Signed-off-by: P.Wassi <p.wassi@gmx.at>
P.Wassi [Tue, 26 Jul 2016 04:44:19 +0000 (06:44 +0200)]
ramips: Improve TP-Link Archer C20i support
Improve / finalise TP-Link Archer C20i support.
Signed-off-by: P.Wassi <p.wassi@gmx.at>
Felix Fietkau [Mon, 1 Aug 2016 09:55:53 +0000 (11:55 +0200)]
target/sdk: update README.SDK to explain dependency handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Aug 2016 09:54:25 +0000 (11:54 +0200)]
target/sdk: ship toolchain and kernel module package
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Aug 2016 09:13:11 +0000 (11:13 +0200)]
image: use the merged package directory to resolve dependencies for per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Aug 2016 09:12:15 +0000 (11:12 +0200)]
build: create a package feed directory containing all packages
Needed for proper dependency handling for per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Aug 2016 08:07:25 +0000 (10:07 +0200)]
build: fix tabs vs whitespace issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Gonzalez [Thu, 28 Jul 2016 20:33:26 +0000 (22:33 +0200)]
brcm63xx: fix CT-536p/CT-5621T support
Fix support for the Comtrend CT-536+, CT-5361 and CT-5621T routers support.
Currently the firmware is broken for these routers, because there is a missing
bar in the code at the DTS file avoiding to match with DTS stuff at the kernel. This
causes the router boots without ethernet connectivity. The status led also has a typo.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Felix Fietkau [Sun, 31 Jul 2016 18:43:03 +0000 (20:43 +0200)]
kernel: silence a false positive uninitialized variable warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jonas Gorski [Thu, 28 Jul 2016 16:08:35 +0000 (18:08 +0200)]
ipq806x: fix boot hang if cmdline contains words with r in the middle
The ATB DTB mangle code will enter an infinite loop if it encounters a
word in the command line that contains an r in the middle of the word.
Fix this by increasing ptr everytime before invoking strchr, ot avoid
finding the same r again.
This fixes booting at least on Netgear R7500v1, which contains
"ubi.mtd=rootfs" in its commandline, triggering the misbehaviour.
Fixes:
0ddcbee26151 ("ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Felix Fietkau [Sun, 31 Jul 2016 18:30:08 +0000 (20:30 +0200)]
mvebu: fix NAND flash issues (FS#67)
Remove the previous PIO delay patch and add a revert patch for a faulty
upstream commit, which seems to have introduced this issue in the first
place
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 17:27:15 +0000 (19:27 +0200)]
imx6: clean up / fix ventana image build code
Fix ubifs mkfs options
Use standard Build/* commands instead of doing everything in the hackish
ubi-boot-overlay template
Fix bootfs.tar.gz build error
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 17:25:32 +0000 (19:25 +0200)]
build: add template for installing device .dtb files
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 16:34:31 +0000 (18:34 +0200)]
imx6: use ubinize-image.sh to fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Sun, 31 Jul 2016 10:41:10 +0000 (12:41 +0200)]
build: do not depend on svn any more
LEDE does not need svn to build any more, remove the prerequisite check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sun, 31 Jul 2016 11:17:44 +0000 (13:17 +0200)]
brcm63xx: fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 11:05:11 +0000 (13:05 +0200)]
ipq806x: add missing sysupgrade-nand => sysupgrade-tar change
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 10:38:01 +0000 (12:38 +0200)]
image: fix build issue with per-device rootfs and legacy devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 10:15:07 +0000 (12:15 +0200)]
perf: prevent build from within the sdk and mark as nonshared
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 10:14:38 +0000 (12:14 +0200)]
sdk: provide a config symbol for detecting builds within the SDK
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 12:19:11 +0000 (14:19 +0200)]
image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 10:53:02 +0000 (12:53 +0200)]
kernel: remove hostap driver
It has been marked as broken for well over a month now and nobody has
complained.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 12:07:47 +0000 (14:07 +0200)]
octeon: increase block2mtd rootfs probe timeout on ER
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 12:01:47 +0000 (14:01 +0200)]
image.mk: add CMDLINE to DEVICE_VARS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 11:48:00 +0000 (13:48 +0200)]
octeon: pad squashfs sysupgrade image rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 11:47:36 +0000 (13:47 +0200)]
image: add support for overriding kernel/rootfs images in sysupgrade-tar template
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 11:45:07 +0000 (13:45 +0200)]
octeon: drop unsupported jffs2 feature flag
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 10:36:33 +0000 (12:36 +0200)]
octeon: fix sysupgrade images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 10:18:08 +0000 (12:18 +0200)]
kernel: fix crashlog regression on x86
Check memblock regions for sufficient size before attempting to use
them. Allow checks for multiple memblock regions until a suitable one is
found.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 20:47:46 +0000 (22:47 +0200)]
include/cmake.mk: fix host builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 18:58:14 +0000 (20:58 +0200)]
dnsmasq: drop --interface and --except-interface options when the interface cannot be found
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Luke McKee [Sat, 23 Jul 2016 19:00:24 +0000 (02:00 +0700)]
cmake: include/cmake.mk add CMAKE_BINARY_SUBDIR to allow out of source tree builds
Some packages need out of source tree building with cmake, for example
when building kernel modules.
See an example here:
https://sourceforge.net/p/accel-ppp/code/ci/master/tree/README
Signed-off-by: Luke McKee <hojuruku@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, rework]
Felix Fietkau [Fri, 29 Jul 2016 17:51:31 +0000 (19:51 +0200)]
netifd: update to the latest version, adds an event handling fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 17:48:12 +0000 (19:48 +0200)]
dnsmasq: remove use of uci state for getting network ifname
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 15:13:48 +0000 (17:13 +0200)]
image.mk: remove leftover variable from a previous rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Fri, 29 Jul 2016 14:47:45 +0000 (16:47 +0200)]
ath25: rework image building
* Remove legacy macros
* Emit generic LZMA and Gzip kernel images from the combined device recipe
* Rename combined device to generic
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 29 Jul 2016 13:05:51 +0000 (15:05 +0200)]
build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 29 Jul 2016 13:03:19 +0000 (15:03 +0200)]
octeon: clean up image build code
Use the generic "sysupgrade-nand" build step to pack the sysupgrade file,
it performs the same steps as the inline "tar-file" macro.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Fri, 29 Jul 2016 12:56:35 +0000 (14:56 +0200)]
dnsmasq: replace the iface hotplug script with a procd trigger
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 12:26:55 +0000 (14:26 +0200)]
dnsmasq: make the check for existing DHCP servers more reliable
If there is no carrier yet, wait for 2 seconds (STP forwarding delay)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ulrich Weber [Mon, 13 Jun 2016 13:21:47 +0000 (15:21 +0200)]
dnsmasq: write atomic config file
multiple invocation of dnsmasq script (e.g. by procd and hotplugd)
might cause procd to restart dnsmasq with an incomplete config file.
Config file generation might take quite a long time on larger configs
due ubus calls for each listening interface...
Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
Felix Fietkau [Fri, 29 Jul 2016 14:17:40 +0000 (16:17 +0200)]
netifd: update to the latest version
Emits an initial event after the first link-up of a force_link
interface. This is needed for making the dnsmasq dhcp check more
reliable
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 12:19:17 +0000 (14:19 +0200)]
procd: add default timeout for reload trigger actions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:07:08 +0000 (13:07 +0200)]
igmpproxy: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:04:13 +0000 (13:04 +0200)]
dropbear: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:03:57 +0000 (13:03 +0200)]
sysntpd: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:00:56 +0000 (13:00 +0200)]
procd: rework trigger handling
Open/close triggers array around service_triggers call to make using
multiple triggers easier to deal with.
The API was quite confusing, because some functions contained implicit
trigger open/close calls and some didn't.
Signed-off-by: Felix Fietkau <nbd@nbd.name>