oweals/u-boot.git
14 years agoallow print_size to print large numbers on 32-bit systems
Timur Tabi [Tue, 13 Apr 2010 18:16:03 +0000 (13:16 -0500)]
allow print_size to print large numbers on 32-bit systems

Modify print_size() so that it can accept numbers larger than 4GB on 32-bit
systems.

Add support for display terabyte, petabyte, and exabyte sizes.  Change the
output to use International Electrotechnical Commission binary prefix standard.

Signed-off-by: Timur Tabi <timur@freescale.com>
14 years agofix print_size printing fractional gigabyte numbers on 32-bit platforms
Timur Tabi [Tue, 13 Apr 2010 18:16:02 +0000 (13:16 -0500)]
fix print_size printing fractional gigabyte numbers on 32-bit platforms

In print_size(), the math that calculates the fractional remainder of a number
used the same integer size as a physical address.  However, the "10 *" factor
of the algorithm means that a large number (e.g. 1.5GB) can overflow the
integer if we're running on a 32-bit system.  Therefore, we need to
disassociate this function from the size of a physical address.

Signed-off-by: Timur Tabi <timur@freescale.com>
14 years agoconfigs: remove unused CONFIG_COMMAND_HISTORY
Kim Phillips [Wed, 14 Apr 2010 02:11:53 +0000 (21:11 -0500)]
configs: remove unused CONFIG_COMMAND_HISTORY

$ git grep CONFIG_COMMAND_HISTORY
CHANGELOG:    CONFIG_COMMAND_HISTORY
include/configs/AP1000.h:#define CONFIG_COMMAND_HISTORY 1
include/configs/keymile-common.h:#define CONFIG_COMMAND_HISTORY         1
include/configs/manroland/common.h:#define CONFIG_COMMAND_HISTORY               1
$

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Heiko Schocher <hs@denx.de>
14 years agomvsmr: fix link error
Anatolij Gustschin [Tue, 13 Apr 2010 12:47:32 +0000 (14:47 +0200)]
mvsmr: fix link error

MVSMR board support doesn't link since recent rework
of U-Boot directory structure. Fix it now.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Andre Schwarz <andre.schwarz@matrix-vision.de>
Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Fixed merge conflict
Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-net
Wolfgang Denk [Tue, 4 May 2010 20:57:37 +0000 (22:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-net

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Tue, 4 May 2010 20:49:15 +0000 (22:49 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

14 years agoBlackfin: bfin_mac: hook up new write_hwaddr function
Mike Frysinger [Tue, 27 Apr 2010 18:15:28 +0000 (14:15 -0400)]
Blackfin: bfin_mac: hook up new write_hwaddr function

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: ethoc: add write_hwaddr support
Thomas Chou [Tue, 27 Apr 2010 12:20:27 +0000 (20:20 +0800)]
net: ethoc: add write_hwaddr support

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: altera_tse: add write_hwaddr support
Thomas Chou [Tue, 27 Apr 2010 12:15:10 +0000 (20:15 +0800)]
net: altera_tse: add write_hwaddr support

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: fec_mxc: add write_hwaddr support
Heiko Schocher [Tue, 27 Apr 2010 05:43:52 +0000 (07:43 +0200)]
net: fec_mxc: add write_hwaddr support

tested on the magnesium board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet:kirkwood_egiga.c: MAC addresses programming using write_hwaddr
Prafulla Wadaskar [Tue, 6 Apr 2010 16:51:33 +0000 (22:21 +0530)]
net:kirkwood_egiga.c: MAC addresses programming using write_hwaddr

Added a new function kwgbe_write_hwaddr for programming egiga
controller's hardware address.
This function will be called for each egiga port being used

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agoProgram net device MAC addresses after initializing
Ben Warren [Mon, 26 Apr 2010 18:11:46 +0000 (11:11 -0700)]
Program net device MAC addresses after initializing

Add a new function to the eth_device struct for programming a network
controller's hardware address.

After all network devices have been initialized and the proper MAC address
for each has been determined, make a device driver call to program the
address into the device.  Only device instances with valid unicast addresses
will be programmed.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
Tested-by: Prafulla Wadaskar <prafulla@marvell.com>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
14 years agonet: add altera triple speeds ethernet mac driver
Thomas Chou [Tue, 20 Apr 2010 04:49:52 +0000 (12:49 +0800)]
net: add altera triple speeds ethernet mac driver

This driver supports the Altera triple speeds 10/100/1000 ethernet
mac.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: add opencore 10/100 ethernet mac driver
Thomas Chou [Thu, 15 Apr 2010 14:32:38 +0000 (22:32 +0800)]
net: add opencore 10/100 ethernet mac driver

This patch ports the opencore 10/100 ethernet mac driver ethoc.c
from linux kernel to u-boot.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agosmc911x driver frame alignment patch
Valentin Yakovenkov [Fri, 23 Apr 2010 05:40:23 +0000 (09:40 +0400)]
smc911x driver frame alignment patch

SMSC911x chips have alignment function to allow frame payload data
(which comes after 14-bytes ethernet header) to be aligned at some
boundary when reading it from fifo (usually - 4 bytes boundary).
This is done by inserting fake zeros bytes BEFORE actual frame data when
reading from SMSC's fifo.
This function controlled by RX_CFG register. There are bits that
represents amount of fake bytes to be inserted.

Linux uses alignment of 4 bytes. Ethernet frame header is 14 bytes long,
so we need to add 2 fake bytes to get payload data aligned at 4-bytes
boundary.
Linux driver does this by adding IP_ALIGNMENT constant (defined at
skb.h) when calculating fifo data length. All network subsystem of Linux
uses this constant too when calculating different offsets.

But u-boot does not use any packet data alignment, so we don't need to
add anything when calculating fifo data length.
Moreover, driver zeros the RX_CFG register just one line up, so chip
does not insert any fake data at the beginig. So calculated data length
is always bigger by 1 word.

It seems that at almost every packet read we get an underflow condition
at fifo and possible corruption of data. Especially at continuous
transfers, such as tftp.

Just after removing this magic addition, I've got tftp transfer speed as
it aught to be at 100Mbps. It was really slow before.

It seems that fifo underflow occurs only when using byte packing on
32-bit blackfin bus (may be because of very small delay between reads).

Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: Kirkwood_egiga.c bugfixes for rx path
Prafulla Wadaskar [Tue, 6 Apr 2010 16:03:08 +0000 (21:33 +0530)]
net: Kirkwood_egiga.c bugfixes for rx path

Cosmetic changes: Few comments updated
Functionality: Rx packet frame size is programming should
be done when port is in disabled state. this is corrected

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agofec_mxc.c: Fix MX27 FEC MAC validity check
Eric Jarrige [Thu, 15 Apr 2010 22:03:19 +0000 (00:03 +0200)]
fec_mxc.c: Fix MX27 FEC MAC validity check

Fix MX27 FEC logic to check validity of the MAC address in fuse.
Only null (empty fuse) or invalid MAC address was retrieved from mx27 fuses before this change.

Signed-off-by: Eric Jarrige <jorasse@armadeus.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agotsec: Wait for both RX and TX to stop
Andy Fleming [Mon, 19 Apr 2010 19:54:49 +0000 (14:54 -0500)]
tsec: Wait for both RX and TX to stop

When gracefully stopping the controller, the driver was continuing if
*either* RX or TX had stopped.  We need to wait for both, or the
controller could get into an invalid state.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: dm9000x: use standard I/O accessors
Mike Frysinger [Wed, 14 Apr 2010 20:29:06 +0000 (16:29 -0400)]
net: dm9000x: use standard I/O accessors

The current dm9000x driver accesses its memory mapped registers directly
instead of using the standard I/O accessors.  This can cause problems on
Blackfin systems as the accesses can get out of order.  So convert the
direct volatile dereferences to use the normal in/out macros.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agompc512x_fec: Move PHY initialization from probe into init routine.
Detlev Zundel [Thu, 8 Apr 2010 09:49:59 +0000 (11:49 +0200)]
mpc512x_fec: Move PHY initialization from probe into init routine.

This saves the autonegotation delay when not using ethernet in U-Boot

Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agofec_mxc don't use internal eeprom on MX25
John Rigby [Thu, 8 Apr 2010 05:29:40 +0000 (23:29 -0600)]
fec_mxc don't use internal eeprom on MX25

Avoid using the internal eeprom on MX25 like MX51 already does.

Signed-off-by: John Rigby <jcrigby@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agofix lockup in mcfmii/mii_discover_phy() in case communication fails
Wolfgang Wegner [Tue, 6 Apr 2010 09:13:02 +0000 (11:13 +0200)]
fix lockup in mcfmii/mii_discover_phy() in case communication fails

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years ago83xx: UEC: Added support for bitBang MII driver access to PHYs
Richard Retanubun [Wed, 17 Jun 2009 20:00:41 +0000 (16:00 -0400)]
83xx: UEC: Added support for bitBang MII driver access to PHYs

This patch enabled support for having PHYs on bitBang MII and uec MII
operating at the same time. Modeled after the MPC8360ADS implementation.

Added the ability to specify which ethernet interfaces have bitbang SMI
on the board header file.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years ago./net/net.c - make Microsoft dns servers happy with random_port() numbers
Robin Getz [Mon, 8 Mar 2010 19:07:00 +0000 (14:07 -0500)]
./net/net.c - make Microsoft dns servers happy with random_port() numbers

For some reason, (which I can't find any documentation on), if U-Boot
gives a port number higher than 17500 to a Microsoft DNS server, the
server will reply to port 17500, and U-Boot will ignore things (since
that isn't the port it asked the DNS server to reply to).

This fixes that by ensuring the random port number is less than 17500.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agoRemove unused "local_crc32" function.
Detlev Zundel [Thu, 1 Apr 2010 12:16:41 +0000 (14:16 +0200)]
Remove unused "local_crc32" function.

For code archeologists, this is a nice example of copy and paste history.

Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: Trivial coding style issue with empty for statement
Detlev Zundel [Wed, 31 Mar 2010 15:56:08 +0000 (17:56 +0200)]
net: Trivial coding style issue with empty for statement

Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agonet: Kirkwood_egiga.c: fixed build warnings
Prafulla Wadaskar [Wed, 3 Mar 2010 09:57:21 +0000 (15:27 +0530)]
net: Kirkwood_egiga.c: fixed build warnings

This patch fixes following build warnings for kirkwood_egiga.c

kirkwood_egiga.c: In function "kwgbe_init":
kirkwood_egiga.c:448: warning: dereferencing type-punned pointer will break strict-aliasing rules
kirkwood_egiga.c: In function "kwgbe_recv":
kirkwood_egiga.c:609: warning: dereferencing type-punned pointer will break strict-aliasing rules

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14 years agoMerge branch 'master' of ssh://gemini/home/wd/git/u-boot/master
Wolfgang Denk [Fri, 30 Apr 2010 22:44:42 +0000 (00:44 +0200)]
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Fri, 30 Apr 2010 22:42:22 +0000 (00:42 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

14 years agopm9263 converted to at91 soc access
Asen Dimov [Mon, 19 Apr 2010 11:18:43 +0000 (14:18 +0300)]
pm9263 converted to at91 soc access

Signed-off-by: Asen Dimov <dimov@ronetix.at>
14 years agoat91: define matrix registers bit fields
Asen Dimov [Mon, 19 Apr 2010 11:17:22 +0000 (14:17 +0300)]
at91: define matrix registers bit fields

Signed-off-by: Asen Dimov <dimov@ronetix.at>
14 years agoMX31: Removed erroneous board name from QONG
Stefano Babic [Tue, 13 Apr 2010 10:19:06 +0000 (12:19 +0200)]
MX31: Removed erroneous board name from QONG

QONG is a module that can be installed on several boards,
not only on the QONG-EVB manufactured by Dave srl.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX31: Add UBI support to QONG module
Stefano Babic [Thu, 8 Apr 2010 15:23:52 +0000 (17:23 +0200)]
MX31: Add UBI support to QONG module

The UBI/UBIFS support is added to the QONG module.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX31: Support 128MB RAM on QONG module
Stefano Babic [Wed, 31 Mar 2010 08:27:47 +0000 (10:27 +0200)]
MX31: Support 128MB RAM on QONG module

The QONG module can be downsized and delivered
with 128MB instead of 256MB. The patch adds
run time support for the two different memory
configurations.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX31: Add support for NAND to QONG board
Stefano Babic [Mon, 29 Mar 2010 14:43:39 +0000 (16:43 +0200)]
MX31: Add support for NAND to QONG board

The NAND device is connected to the FPGA of the QONG board
and not to the NFC controller. For this reason, the FPGA must
be set and initialized before accessing to the NAND itself.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX31: add pin definitions for NAND controller
Stefano Babic [Mon, 29 Mar 2010 13:56:10 +0000 (15:56 +0200)]
MX31: add pin definitions for NAND controller

Add pin definitions ralted to the NAND controller to be used
to set up the pin multiplexer.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX31: add accessor function to get a gpio
Stefano Babic [Tue, 13 Apr 2010 10:07:00 +0000 (12:07 +0200)]
MX31: add accessor function to get a gpio

The patch adds an accessor function to get the value of a gpio.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agomx51evk: correct list of possible BOOT_FROM values
Stefano Babic [Tue, 13 Apr 2010 10:38:43 +0000 (12:38 +0200)]
mx51evk: correct list of possible BOOT_FROM values

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agomkimage: correct spelling error in imximage
Stefano Babic [Tue, 13 Apr 2010 10:38:22 +0000 (12:38 +0200)]
mkimage: correct spelling error in imximage

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX25 print arm clock instead of mpllclk on boot
John Rigby [Thu, 8 Apr 2010 05:30:09 +0000 (23:30 -0600)]
MX25 print arm clock instead of mpllclk on boot

Replace call to imx_get_mpllclk with imx_get_armclk
to show frequency of ARM core instead of mpll internal
bus in print_cpuinfo.

Signed-off-by: John Rigby <jcrigby@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
14 years agoconfigs/openrd_base.h: reordered macros
Frans Meulenbroeks [Tue, 6 Apr 2010 13:36:11 +0000 (19:06 +0530)]
configs/openrd_base.h: reordered macros

moved CONFIG_CMD_FAT to filesystem section
swapped CONFIG_CMD_NAND and CONFIG_CMD_MII so they are alpha correct

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
14 years agoconfigs/sheevaplug: added a few additional commands
Frans Meulenbroeks [Tue, 6 Apr 2010 12:56:19 +0000 (18:26 +0530)]
configs/sheevaplug: added a few additional commands

This patch includes a few additional commands in the sheevaplug
version of u-boot:
- support for LONGHELP so you can get help messages
- auto completion and command editing
- ubi and mii support
- ext2 filesystem (convenient if you have an ext2 from which you want to boot)
- jffs2 and ubifs filesystems (if you want to use these in NAND)

This also makes it more similar to openrd client.

Side effect of this patch is that the code now needs 3 sectors i.s.o. 2
so an existing env is overwritten

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
14 years agoMarvell GuruPlug Board Support
Siddarth Gore [Thu, 18 Mar 2010 14:55:40 +0000 (20:25 +0530)]
Marvell GuruPlug Board Support

GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot

References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org

This patch is for GuruPlug Plus, but it supports Standard version
as well.

Signed-off-by: Siddarth Gore <gores@marvell.com>
14 years agoMoved board specific values in config file
Stefano Babic [Sun, 28 Mar 2010 11:43:26 +0000 (13:43 +0200)]
Moved board specific values in config file

The lowlevel_init file contained some hard-coded values
to setup the RAM. These board related values are moved into
the board configuration file.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMX51EVK: Remove CPLD related code
Fabio Estevam [Wed, 31 Mar 2010 13:32:56 +0000 (06:32 -0700)]
MX51EVK: Remove CPLD related code

There is no CPLD on MX51EVK board, so remove CPLD related function.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
14 years agoarm, i.mx27: add support for magnesium board from projectiondesign
Heiko Schocher [Fri, 5 Mar 2010 06:36:33 +0000 (07:36 +0100)]
arm, i.mx27: add support for magnesium board from projectiondesign

This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h

Signed-off-by: Heiko Schocher <hs@denx.de>
14 years agoarm, mx27: add support for SDHC1 pin init
Heiko Schocher [Thu, 4 Mar 2010 07:12:05 +0000 (08:12 +0100)]
arm, mx27: add support for SDHC1 pin init

Signed-off-by: Heiko Schocher <hs@denx.de>
14 years agoSAMSUNG: make s5p common gpio functions
Minkyu Kang [Wed, 24 Mar 2010 06:31:06 +0000 (15:31 +0900)]
SAMSUNG: make s5p common gpio functions

Because of s5pc1xx gpio is same as s5p seires SoC,
move gpio functions to drvier/gpio/
and modify structure's name from s5pc1xx_ to s5p_.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agoSAMSUNG: serial: modify name from s5pc1xx to s5p
Minkyu Kang [Wed, 24 Mar 2010 07:59:30 +0000 (16:59 +0900)]
SAMSUNG: serial: modify name from s5pc1xx to s5p

Because of other s5p series SoC will use these serial functions,
modify function's name and structure's name.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
14 years agopm9263: remove CONFIG_CMD_AUTOSCRIPT
Asen Dimov [Wed, 7 Apr 2010 09:33:11 +0000 (12:33 +0300)]
pm9263: remove CONFIG_CMD_AUTOSCRIPT

Signed-off-by: Asen Dimov <dimov@ronetix.at>
14 years agoat91: add defines for RTT and GPBR
Alexander Holler [Mon, 29 Mar 2010 19:39:43 +0000 (21:39 +0200)]
at91: add defines for RTT and GPBR

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
14 years agopm9261: remove CONFIG_CMD_AUTOSCRIPT
Asen Dimov [Tue, 6 Apr 2010 13:17:34 +0000 (16:17 +0300)]
pm9261: remove CONFIG_CMD_AUTOSCRIPT

Signed-off-by: Asen Dimov <dimov@ronetix.at>
14 years agopm9261 converted to at91 soc access
Asen Dimov [Tue, 6 Apr 2010 13:18:04 +0000 (16:18 +0300)]
pm9261 converted to at91 soc access

Signed-off-by: Asen Dimov <dimov@ronetix.at>
14 years agoARM Update mach-types
trix [Sat, 10 Apr 2010 17:46:49 +0000 (12:46 -0500)]
ARM Update mach-types

Fetched from http://www.arm.linux.org.uk/developer/machines/download.php
And built with

repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
commit 85b3cce880a19e78286570d5fd004cc3cac06f57

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
14 years agoppc4xx: Fix APC405 build breakage
Stefan Roese [Wed, 28 Apr 2010 09:09:59 +0000 (11:09 +0200)]
ppc4xx: Fix APC405 build breakage

This patch fixes APC405 build, by defining CONFIG_PPC4XX_I2C. This is
needed since the move of the PPC4xx I2C driver into the drivers/i2c
directory.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
14 years agoppc4xx: Add support for ICON board (PPC440SPe)
Stefan Roese [Tue, 27 Apr 2010 09:37:28 +0000 (11:37 +0200)]
ppc4xx: Add support for ICON board (PPC440SPe)

This patch adds support for the Mosaix Technologies, Inc. ICON board,
based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM
(512MB standard) and 64MByte of NOR FLASH.

Support for the onboard SM502 will be added later.

Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoppc4xx: Add missing APC405 to MAKEALL
Stefan Roese [Mon, 26 Apr 2010 11:31:08 +0000 (13:31 +0200)]
ppc4xx: Add missing APC405 to MAKEALL

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
14 years agoFix typos in Korat board console output
Larry Johnson [Tue, 20 Apr 2010 12:11:40 +0000 (08:11 -0400)]
Fix typos in Korat board console output

Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoQONG: Adapt flash addresses and mtdparts to grown image size
Wolfgang Denk [Wed, 28 Apr 2010 10:54:43 +0000 (12:54 +0200)]
QONG: Adapt flash addresses and mtdparts to grown image size

Also enable HUSH shell.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agomtdparts: get rid of custom DEBUG macro, use debug()
Wolfgang Denk [Wed, 28 Apr 2010 08:58:10 +0000 (10:58 +0200)]
mtdparts: get rid of custom DEBUG macro, use debug()

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agomtdparts: fix write through NULL pointer
Wolfgang Denk [Wed, 28 Apr 2010 08:53:47 +0000 (10:53 +0200)]
mtdparts: fix write through NULL pointer

The "mtdparts add" command wrote through a NULL pointer - on many
systems this went unnoticed (PowerPC has writable RAM there, some ARM
systems have ROM where a write has no effect), but on arm1136
(i.MX31) it crashed the system.

Add appropriate checks.

Signed-off-by: Wolfgang Denk <wd@denx.de>
14 years agoubifsmount fails due to not initialized list
Stefano Babic [Wed, 21 Apr 2010 07:47:19 +0000 (09:47 +0200)]
ubifsmount fails due to not initialized list

ubifsmount is not working and causes an access with
a pointer set to zero because the ubifs_fs_type
is not initialized correctly.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-video
Wolfgang Denk [Tue, 27 Apr 2010 22:10:41 +0000 (00:10 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-video

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Tue, 27 Apr 2010 22:09:53 +0000 (00:09 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

14 years agoMX31: Added LCD support for QONG module
Stefano Babic [Wed, 21 Apr 2010 07:56:31 +0000 (09:56 +0200)]
MX31: Added LCD support for QONG module

Added support for LCD and splash image to the QONG module.
The supported display is VBEST-VGG322403.

Signed-off-by: Stefano Babic <sbabic@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc5xxx
Wolfgang Denk [Tue, 27 Apr 2010 21:02:12 +0000 (23:02 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Tue, 27 Apr 2010 20:57:41 +0000 (22:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

14 years agoMerge branch 'next' of git://git.denx.de/u-boot-nios
Wolfgang Denk [Tue, 27 Apr 2010 20:53:04 +0000 (22:53 +0200)]
Merge branch 'next' of git://git.denx.de/u-boot-nios

14 years agoppc: Split MPC83xx SERDES code from MPC85xx/MPC86xx/QorIQ
Kumar Gala [Tue, 20 Apr 2010 15:02:24 +0000 (10:02 -0500)]
ppc: Split MPC83xx SERDES code from MPC85xx/MPC86xx/QorIQ

The MPC83xx SERDES control is different from the other FSL PPC chips.
For now lets split it out so we can standardize on interfaces for
determining of a device on SERDES is configured.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
14 years agompc85xx: Add the ability to set LCRR[CLKDIV] to improve R/W speed of flash
Lan Chunhe [Wed, 21 Apr 2010 12:40:50 +0000 (07:40 -0500)]
mpc85xx: Add the ability to set LCRR[CLKDIV] to improve R/W speed of flash

Signed-off-by: Lan Chunhe <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago85xx: clean up the io_sel for PCI express of P1022
Dave Liu [Wed, 14 Apr 2010 11:05:06 +0000 (19:05 +0800)]
85xx: clean up the io_sel for PCI express of P1022

clean up the wrong io_sel for PCI express according to latest manual.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago85xx/socrates: Remove NFS support to fit image size.
Detlev Zundel [Wed, 14 Apr 2010 09:32:20 +0000 (11:32 +0200)]
85xx/socrates: Remove NFS support to fit image size.

This fixes an overflow during the link phase.

Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago85xx: Fix compile warning
Kumar Gala [Tue, 13 Apr 2010 16:07:57 +0000 (11:07 -0500)]
85xx: Fix compile warning

cpu.c: In function 'checkcpu':
cpu.c:47: warning: unused variable 'gur'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago85xx: Convert cpu_init_f code to use out_be32 for LBC registers
Kumar Gala [Wed, 14 Apr 2010 04:56:23 +0000 (23:56 -0500)]
85xx: Convert cpu_init_f code to use out_be32 for LBC registers

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl_sata: Move the snoop bit to another place
Dave Liu [Mon, 12 Apr 2010 06:23:35 +0000 (14:23 +0800)]
fsl_sata: Move the snoop bit to another place

For P1022 SATA host controller, the data snoop bit of DW3 in PRDT
is moved to bit28.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl_sata: Add the workaround for errata SATA-A001
Dave Liu [Mon, 12 Apr 2010 06:23:25 +0000 (14:23 +0800)]
fsl_sata: Add the workaround for errata SATA-A001

After power on, the SATA host controller of P1022 Rev1 is configured
in legacy mode instead of the expected enterprise mode.

Software needs to clear bit[28] of HControl register to change to
enterprise mode after bringing the host offline.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl-ddr: Add extra cycle to turnaround times
Dave Liu [Tue, 8 Dec 2009 03:56:48 +0000 (11:56 +0800)]
fsl-ddr: Add extra cycle to turnaround times

Add an extra cycle turnaround time to read->write to ensure stability
at high DDR frequencies.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agofsl-ddr: add the macro for Rtt_Nom definition
Dave Liu [Fri, 5 Mar 2010 04:23:00 +0000 (12:23 +0800)]
fsl-ddr: add the macro for Rtt_Nom definition

add the macro definition for Rtt_Nom termination value for DDR3

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agoppc/p4080: Add p4080 DEVDISR2 & SRDS_PLLCR0 defines
Kumar Gala [Wed, 7 Apr 2010 15:39:46 +0000 (10:39 -0500)]
ppc/p4080: Add p4080 DEVDISR2 & SRDS_PLLCR0 defines

Added some needed fines and some misc additional defines
used by p4080 initialization.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agoppc/p4080: Extend the GUTS memory map
Dave Liu [Fri, 5 Mar 2010 04:23:00 +0000 (12:23 +0800)]
ppc/p4080: Extend the GUTS memory map

Extend pin control and clock control to GUTS memory map

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agoppc/p4080: Fix synchronous frequency calculations
Srikanth Srinivasan [Wed, 10 Feb 2010 09:32:43 +0000 (17:32 +0800)]
ppc/p4080: Fix synchronous frequency calculations

When DDR is in synchronous mode, the existing code assigns sysclk
frequency to DDR frequency.  It should be synchronous with the platform
frequency.  CPU frequency is based on platform frequency in synchronous
mode.

Also fix:

* Fixes the bit mask for DDR_SYNC (RCWSR5[184])
* Corrects the detection of synchronous mode.

Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agoppc/85xx: Fixup PCI nodes for P1_P2_RDB
Kumar Gala [Wed, 7 Apr 2010 07:49:12 +0000 (02:49 -0500)]
ppc/85xx: Fixup PCI nodes for P1_P2_RDB

While we had ft_pci_board_setup it wasn't being called by
ft_board_setup.  Fix that so we actually update the device tree PCI
nodes on P1_P2_RDB boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years agonios2: add nios2-generic board
Thomas Chou [Wed, 21 Apr 2010 00:40:59 +0000 (08:40 +0800)]
nios2: add nios2-generic board

This is a generic approach to port u-boot for nios2 boards.
You may find the usage of this approach on the nioswiki,
http://nioswiki.com/DasUBoot

A fpga parameter file, which contains base address information
and drivers declaration, is generated from Altera's hardware system
description sopc file using tools.

The example fpga parameter file is compatible with EP1C20, EP1S10
and EP1S40 boards. So these boards can be removed after this commit.
Though epcs controller is removed to cut the dependency of altera_spi
driver.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: fix no flash, add nand and mmc init in board.c
Thomas Chou [Thu, 22 Apr 2010 09:27:16 +0000 (17:27 +0800)]
nios2: fix no flash, add nand and mmc init in board.c

This patch fixes error when CONFIG_SYS_NO_FLASH. And adds
nand flash and mmc initialization, which should go before
env initialization.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: consolidate reset initialization
Thomas Chou [Tue, 20 Apr 2010 03:01:11 +0000 (11:01 +0800)]
nios2: consolidate reset initialization

Global interrupt should be disabled from the beginning.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agoaltera_jtag_uart: bypass when no jtag connection
Thomas Chou [Wed, 31 Mar 2010 00:30:08 +0000 (08:30 +0800)]
altera_jtag_uart: bypass when no jtag connection

This patch adds an option to bypass output waiting when there
is no jtag connection. This allows the jtag uart work similar
to a serial uart, ie, boot even without connection.

This option is enabled with CONFIG_ALTERA_JTAG_UART_BYPASS

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: add dma_alloc_coherent
Thomas Chou [Sat, 17 Apr 2010 15:34:40 +0000 (23:34 +0800)]
nios2: add dma_alloc_coherent

This function return cache-line aligned allocation which is mapped
to uncached io region.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: add 64 bits swab support
Thomas Chou [Sat, 17 Apr 2010 15:10:09 +0000 (23:10 +0800)]
nios2: add 64 bits swab support

This patch adds 64 bits swab support. Most 32 bits processors use
this. We need 64 bits swab for UBI.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: add altera cf reset
Thomas Chou [Wed, 31 Mar 2010 00:36:24 +0000 (08:36 +0800)]
nios2: add altera cf reset

This patch toggles power to reset the cf card.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agonios2: allow link script overriding from boards
Thomas Chou [Sat, 17 Apr 2010 09:39:12 +0000 (17:39 +0800)]
nios2: allow link script overriding from boards

This patch allow boards to override the default link script.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
14 years agompc5121: pdm360ng: add coprocessor POST
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:11 +0000 (19:27 +0200)]
mpc5121: pdm360ng: add coprocessor POST

Adds coprocessor communication POST code

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agompc5121: add common post_word_load/store code
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:10 +0000 (19:27 +0200)]
mpc5121: add common post_word_load/store code

Add common post_word_load/post_word_store routines
for all mpc5121 boards. pdm360ng board POST support
added by subsequent patch needs them.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agompc5121: add support for PDM360NG board
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:09 +0000 (19:27 +0200)]
mpc5121: add support for PDM360NG board

PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.

Signed-off-by: Michael Weiss <michael.weiss@ifm.com>
Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agompc5121: determine RAM size using get_ram_size()
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:08 +0000 (19:27 +0200)]
mpc5121: determine RAM size using get_ram_size()

Configure CONFIG_SYS_MAX_RAM_SIZE address range in
DDR Local Access Window and determine the RAM size.
Fix DDR LAW afterwards using detected RAM size.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agompc512x: make MEM IO Control configuration a board config option
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:07 +0000 (19:27 +0200)]
mpc512x: make MEM IO Control configuration a board config option

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agompc5121: add PSC serial communication routines
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:06 +0000 (19:27 +0200)]
mpc5121: add PSC serial communication routines

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agompc512x: add multi serial PSC support
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:05 +0000 (19:27 +0200)]
mpc512x: add multi serial PSC support

Extend mpc512x serial driver to support multiple PSC ports.

Subsequent patches for PDM360NG board support make use of this
functionality by defining CONFIG_SERIAL_MULTI in the board config
file. Additionally the used PSC devices are specified by defining
e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6.

Support for PSC devices other than 1, 3, 4 and 6 is not added
by this patch because these aren't used currently. In the future
it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and
INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c.
Additionally you have to add code for registering added
devices in serial_initialize() in common/serial.c.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agoserial: struct serial_device: add uninit() entry for drivers
Anatolij Gustschin [Sat, 24 Apr 2010 17:27:04 +0000 (19:27 +0200)]
serial: struct serial_device: add uninit() entry for drivers

Subsequent patch extends mpc512x serial driver to support
multiple PSC ports. The driver will provide an uninit()
function to stop the serial controller and to disable the
controller's clock. Adding uninit() entry to struct serial_device
allows disabling the serial controller after usage of
a stdio serial device.

This patch adds uninit() entry to the struct serial_device
and fixes initialization of this structure in the code
accordingly.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
14 years agoMerge branch 'master' of git://git.denx.de/u-boot-mmc
Wolfgang Denk [Sat, 24 Apr 2010 19:25:42 +0000 (21:25 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mmc

14 years agoMerge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Sat, 24 Apr 2010 19:16:57 +0000 (21:16 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx