York Sun [Fri, 18 Nov 2016 18:02:14 +0000 (10:02 -0800)]
powerpc: P1020: Remove macro CONFIG_P1020
Replace CONFIG_P1020 with ARCH_P1020 in Kconfig and clean up
existing macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Fri, 18 Nov 2016 02:36:11 +0000 (18:36 -0800)]
powerpc: P1_P2_RDB_PC: Drop TARGET_P1_P2_RDB_PC
All boards covered by this group have been converted to their own
targers. Drop TARGET_P1_P2_RDB_PC from Kconfig.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 22:19:18 +0000 (14:19 -0800)]
powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P2020RDB_PC instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.
Remove macro CONFIG_P2020RDB.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 22:10:14 +0000 (14:10 -0800)]
powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.
Remove macro CONFIG_P1025RDB.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 21:48:39 +0000 (13:48 -0800)]
powerpc: P1024RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1024RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.
Remove macro CONFIG_P1024RDB.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 21:43:18 +0000 (13:43 -0800)]
powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.
Remove macro CONFIG_P1021RDB.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 21:53:54 +0000 (13:53 -0800)]
powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in Kconfig
Use TARGET_P1020UTM instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.
Remove macro CONFIG_P1020UTM.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 21:53:33 +0000 (13:53 -0800)]
powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020RDB_PD instead of sharing with P1_P2_RDB_PC
to simplify Kconfig and config macros.
Remove macro CONFIG_P1020RDB_PD.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 21:52:44 +0000 (13:52 -0800)]
powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020RDB_PC instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.
Remove macro CONFIG_P1020RDB_PC.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 21:12:38 +0000 (13:12 -0800)]
powerpc: P1020MBG: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020MBG instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and other macros.
Remove macro CONFIG_P1020MBG.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 00:06:48 +0000 (16:06 -0800)]
powerpc: P1017: Drop configuration for P1017
P1017 is a single-core version of P1023. There is no P1017 target
configured. Drop related macros. P1017 SoC is still supported.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 00:02:09 +0000 (16:02 -0800)]
powerpc: P1014: Drop configuration for P1014
P1014 is a variant of P1010. There is no P1014 target configured.
Drop related macros. P1014 SoC is still supported.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Thu, 17 Nov 2016 00:00:08 +0000 (16:00 -0800)]
powerpc: P1013: Drop configuration for P1013
P1013 is a single-core version of P1022. There is no P1022 target
configured. Drop related macros. P1022 SoC is still supported.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 23:57:52 +0000 (15:57 -0800)]
powerpc: P1012: Drop configuration for P1012
P1012 is a single-core version of P1021. There is no P1012 target
configured. Drop related macros. P1012 SoC is still supported.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 23:54:15 +0000 (15:54 -0800)]
powerpc: P1011: Remove macro CONFIG_P1011
Replace CONFIG_P1011 with ARCH_P1011 in Kconfig. P1011RDB seems to be in
scrapyard though.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 23:45:31 +0000 (15:45 -0800)]
powerpc: P1023: Remove macro CONFIG_P1023
Replace CONFIG_P1023 with ARCH_P1023 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 23:25:52 +0000 (15:25 -0800)]
powerpc: P1022DS: Remove macro CONFIG_P1022DS
Use CONFIG_TARGET_P1022DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 23:23:52 +0000 (15:23 -0800)]
powerpc: P1022: Remove macro CONFIG_P1022
Replace CONFIG_P1022 with ARCH_P1022 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 21:30:06 +0000 (13:30 -0800)]
powerpc: P1010RDB: Remove macros CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB
Remove CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB and split TARGET_P1010RDB
to TARGET_P1010RDB_PA and TARGET_P1010RDB_PB in Kconfig.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 21:08:52 +0000 (13:08 -0800)]
powerpc: P1010: Remove macro CONFIG_P1010
Replace CONFIG_P1010 with ARCH_P1010 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:42:11 +0000 (11:42 -0800)]
powerpc: xpedite: Remove macro CONFIG_XPEDITE5370
This macro is no longer used.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:41:12 +0000 (11:41 -0800)]
powerpc: MPC8572DS: Remove macro CONFIG_MPC8572DS
Use CONFIG_TARGET_MPC8572DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:39:20 +0000 (11:39 -0800)]
powerpc: MPC8572: Remove macro CONFIG_MPC8572
Replace CONFIG_MPC8572 with ARCH_MPC8572 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:36:32 +0000 (11:36 -0800)]
powerpc: MPC8569MDS: Remove macro CONFIG_MPC8569MDS
Use CONFIG_TARGET_MPC8569MDS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:34:52 +0000 (11:34 -0800)]
powerpc: MPC8569: Remove macro CONFIG_MPC8569
Replace CONFIG_MPC8569 with ARCH_MPC8569 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:33:07 +0000 (11:33 -0800)]
powerpc: MPC8568MDS: Remove macro CONFIG_MPC8568MDS
This macro is no longer used.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:32:17 +0000 (11:32 -0800)]
powerpc: MPC8568: Remove macro CONFIG_MPC8568
Replace CONFIG_MPC8568 with ARCH_MPC8568 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:27:54 +0000 (11:27 -0800)]
powerpc: MPC8560ADS: Remove macro CONFIG_MPC8560ADS
This macro is no longer used.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:26:45 +0000 (11:26 -0800)]
powerpc: MPC8560: Remove macro CONFIG_MPC8560
Replace CONFIG_MPC8560 with ARCH_MPC8560 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:24:45 +0000 (11:24 -0800)]
powerpc: MPC8555CDS: Remove macro CONFIG_MPC8555CDS
Use CONFIG_TARGET_MPC8555CDS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:23:23 +0000 (11:23 -0800)]
powerpc: MPC8555: Remove macro CONFIG_MPC8555
Replace CONFIG_MPC8555 with ARCH_MPC8555 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:20:42 +0000 (11:20 -0800)]
powerpc: MPC8541CDS: Remove macro CONFIG_MPC8541CDS
Replace with CONFIG_TARGET_MPC8541CDS from Kconfig.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:18:31 +0000 (11:18 -0800)]
powerpc: mpc8541: Remove macro CONFIG_MPC8541
Replace CONFIG_MPC8541 with ARCH_MPC8541 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:15:39 +0000 (11:15 -0800)]
powerpc: MPC8540ADS: Remove macro CONFIG_MPC8540ADS
This macro is no longer used.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:13:06 +0000 (11:13 -0800)]
powerpc: mpc8540: Remove macro CONFIG_MPC8540
Replace CONFIG_MPC8540 with ARCH_MPC8540 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:09:07 +0000 (11:09 -0800)]
powerpc: MPC8536DS: Remove macro CONFIG_MPC8536DS
Use CONFIG_TARGET_MPC8536DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:06:47 +0000 (11:06 -0800)]
powerpc: MPC8536: Move CONFIG_MPC8536 to Kconfig option
Replace CONFIG_MPC8536 with ARCH_MPC8536 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:51:24 +0000 (11:51 -0800)]
powerpc: C29XPCIE: Remove macro CONFIG_C29XPCIE
Use CONFIG_TARGET_C29XPCIE instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 02:44:22 +0000 (18:44 -0800)]
powerpc: C29X: Move CONFIG_PPC_C29X to Kconfig option
Replace CONFIG_PPC_C29X with ARCH_C29X in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 02:32:50 +0000 (18:32 -0800)]
powerpc: BSC9132QDS: Remove CONFIG_BSC9132QDS macro
Use CONFIG_TARGET_BSC9132QDS from Kconfig option, remove CONFIG_BSC9132QDS
macro.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 02:30:45 +0000 (18:30 -0800)]
powerpc: BSC9131RDB: Remove CONFIG_BSC9131RDB macro
This macro CONFIG_BSC9131RDB is no longer needed.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Tue, 15 Nov 2016 22:09:50 +0000 (14:09 -0800)]
powerpc: BSC9131/2: Move CONFIG_BSC9131/2 to Kconfig options
Replace CONFIG_BSC9131, CONFIG_BSC9132 with ARCH_BSC9131, ARCH_BSC9132
Kconfig options.
Also drop #ifdef in BSC9131RDB.h since it is redundant.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:45:18 +0000 (11:45 -0800)]
powerpc: MPC8544DS: Remove macro CONFIG_MPC8544DS
Use CONFIG_TARGET_MPC8544DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Tue, 15 Nov 2016 21:57:15 +0000 (13:57 -0800)]
powerpc: MPC8544: Move CONFIG_MPC8544 to Kconfig option
Replace CONFIG_MPC8544 with ARCH_MPC8544 in Kconfig.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 19:43:49 +0000 (11:43 -0800)]
powerpc: MPC8548CDS: Remove macro CONFIG_MPC8548CDS
Use CONFIG_TARGET_MPC8548CDS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Tue, 15 Nov 2016 21:52:34 +0000 (13:52 -0800)]
powerpc: MPC8548: Move CONFIG_MPC8548 to Kconfig option
Replace CONFIG_MPC8548 with ARCH_MPC8548 in Kconfig.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Wed, 16 Nov 2016 01:02:31 +0000 (17:02 -0800)]
tools/env: Correct include kconfig
While we move some config macros to Kconfig, kconfig header is needed
to avoid compiling error if not already included.
Signed-off-by: York Sun <york.sun@nxp.com>
Semen Protsenko [Wed, 16 Nov 2016 17:19:06 +0000 (19:19 +0200)]
spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
This option isn't used for anything, so get rid of it.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Semen Protsenko [Wed, 16 Nov 2016 17:19:05 +0000 (19:19 +0200)]
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Fix sniper and kc1 migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 17 Nov 2016 16:46:56 +0000 (11:46 -0500)]
Merge branch 'master' of git.denx.de/u-boot-mmc
Tom Rini [Thu, 17 Nov 2016 16:46:45 +0000 (11:46 -0500)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
Patch queue for efi - 2016-11-17
Highlights this time around:
- x86 efi_loader support
- hello world efi test case
- network device name is now representative
- terminal output reports modes correctly
- fix psci reset for ls1043/ls1046
- fix efi_add_runtime_mmio definition for x86
- efi_loader support for ls2080
Alexander Graf [Thu, 17 Nov 2016 00:03:02 +0000 (01:03 +0100)]
ls2080ardb: Convert to distro boot
Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.
This patch extends the LS2080ARDB board to use that framework if the
hard coded NOR flash location does not contain a bootable image.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 17 Nov 2016 00:03:01 +0000 (01:03 +0100)]
armv8: fsl-layerscape: Add support for efi_loader RTS reset
When implementing efi loader support, we can expose runtime services
for payloads. One such service is CPU reset.
This patch implements RTS CPU reset support for layerscape systems.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
Alexander Graf [Thu, 17 Nov 2016 00:03:00 +0000 (01:03 +0100)]
armv8: ls2080a: Declare spin tables as reserved for efi loader
The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes into those
regions.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 17 Nov 2016 00:02:59 +0000 (01:02 +0100)]
ls2080ardb: Reserve DP-DDR RAM
The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's
rather claim it's a reserved region in the EFI memory map
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
Alexander Graf [Thu, 17 Nov 2016 00:02:57 +0000 (01:02 +0100)]
ls2080: Exit dpaa only right before exiting U-Boot
On ls2080 we have a separate network fabric component which we need to
shut down before we enter Linux (or any other OS). Along with that also
comes configuration of the fabric using a description file.
Today we always stop and configure the fabric in the boot script and
(again) exit it on device tree generation. This works ok for the normal
booti case, but with bootefi the payload we're running may still want to
access the network.
So let's add a new fsl_mc command that defers configuration and stopping
the hardware to when we actually exit U-Boot, so that we can still use
the fabric from an EFI payload.
For existing boot scripts, nothing should change with this patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
[agraf: Fix x86 build]
Alexander Graf [Thu, 17 Nov 2016 00:02:56 +0000 (01:02 +0100)]
efi_loader: Fix efi_add_runtime_mmio definition
The efi_add_runtime_mmio prototype for disabled CONFIG_EFI_LOADER
was different from the enabled one. Sync them.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 17 Nov 2016 00:02:55 +0000 (01:02 +0100)]
efi_loader: Disable PSCI reset for ls1043 and ls1046
The NXP ls1043 and ls1046 systems do not (yet) have PSCI enablement
for reset. Don't enable generic PSCI reset code on them.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 17 Nov 2016 00:02:58 +0000 (01:02 +0100)]
efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3
Some boards decided not to run ATF or other secure firmware in EL3, so
they instead run U-Boot there. The uEFI spec doesn't know what EL3 is
though - it only knows about EL2 and EL1. So if we see that we're running
in EL3, let's get into EL2 to make payloads happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
Maxime Ripard [Fri, 4 Nov 2016 15:18:11 +0000 (16:18 +0100)]
sunxi: sina33: Enable the LCD
The SinA33 comes with an optional 7" display. Enable it in the
configuration.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Maxime Ripard [Fri, 4 Nov 2016 15:18:10 +0000 (16:18 +0100)]
sunxi: sina33: Enable the eMMC
The SinA33 has an 4GB Toshiba eMMC connected to the MMC2 controller.
Enable it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Maxime Ripard [Fri, 4 Nov 2016 15:18:09 +0000 (16:18 +0100)]
mmc: sunxi: Enable 8bits bus width for sun8i
The sun8i SoCs also have a 8 bits capable MMC2 controller. Enable the
support for those too.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Maxime Ripard [Fri, 4 Nov 2016 15:18:08 +0000 (16:18 +0100)]
mmc: Retry the switch command
Some eMMC will fail at the first switch, but would succeed in a subsequent
one.
Make sure we try several times to cover those cases. The number of retries
(and the behaviour) is currently what is being used in Linux.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Bharat Kumar Gogada [Tue, 2 Aug 2016 15:04:13 +0000 (20:34 +0530)]
ARM64: zynqmp: Adding prefetchable memory space to pcie
Adding prefetchable memory space to pcie device tree node.
Shifting configuration space to 64-bit address space.
Removing pcie device tree node from amba as it requires size-cells=<2>
in order to access 64-bit address space.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Kedareswara rao Appana [Fri, 30 Sep 2016 05:04:59 +0000 (10:34 +0530)]
ARM64: zynqmp: Add clocks for LPDDMA
Zynqmp DMA driver expects two clocks (main clock and apb clock)
For LPDDMA channels the two clocks are missing in the
Dma node resulting probe failure.
xilinx-zynqmp-dma
ffa80000.dma: main clock not found.
xilinx-zynqmp-dma
ffa80000.dma: Probing channel failed
xilinx-zynqmp-dma: probe of
ffa80000.dma failed with error -2
This patch fixes this issue.
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Kedareswara rao Appana [Fri, 9 Sep 2016 07:06:01 +0000 (12:36 +0530)]
ARM64: zynqmp: Add description for LPDDMA channel usage
LPDDMA default allows only secured access.
inorder to enable these dma channels,
one should ensure that it allows non secure access.
This patch updates the same.
Reported-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 11 Feb 2016 06:19:06 +0000 (07:19 +0100)]
ARM64: zynqmp: Use 64bit size cell format for main amba bus
Use 64bit size cell for main amba bus instead of 32bit because PCIe
node requires it Change 64bit sizes also for all others IPs.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Naga Sureshkumar Relli [Wed, 18 May 2016 06:53:13 +0000 (12:23 +0530)]
ARM64: zynqmp: Add ocm node in dtsi
This patch adds ocm controller node in zynqmp.dtsi.
needed for OCM edac support.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Anurag Kumar Vulisha [Tue, 17 May 2016 11:19:01 +0000 (16:49 +0530)]
ARM64: zynqmp: Add device tree properties for ZynqMP GT core
This patch adds the ZynqMP GT core device-tree properties for
zynqmp.dtsi file.
Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: Hyun Kwon <hyunk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 20 Oct 2016 08:36:05 +0000 (10:36 +0200)]
Revert "ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes"
This reverts commit
bd750e7a6c515c081b72d4ef108a2bfa691a3fd1
Implemented the new workaround for auto tuning based on
zynqmp compatible string, so removed the 'broken-tuning'
property.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Sai Krishna Potthuri [Tue, 16 Aug 2016 09:11:35 +0000 (14:41 +0530)]
ARM64: zynqmp: change sdhci compatible string.
This patch changes the compatible string for sdhci node,
adds "xlnx,device_id" and "xlnx,mio_bank" property to sdhci node.
Signed-off-by: Sai Krishna Potthuri <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 6 Apr 2016 08:43:23 +0000 (10:43 +0200)]
ARM64: zynqmp: List all SMMU ids
Add SMMU description for all tested IPs.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Nava kishore Manne [Sat, 20 Aug 2016 18:47:52 +0000 (00:17 +0530)]
ARM64: zynqmp: Add support for zynqmp fpga manager
Add support for zynqmp fpga manager.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Naga Sureshkumar Relli [Mon, 20 Jun 2016 10:18:30 +0000 (15:48 +0530)]
ARM64: zynqmp: Add cortexa53 edac node
This patch adds edac node for arm cortexa53 to report
errors on L1 and L2 caches.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 20 Oct 2016 08:38:16 +0000 (10:38 +0200)]
Revert "ARM64: zynqmp: Add serdes address space dp driver"
This reverts commit
786db82bd5bf09cc8f78c8b14445e843d7566b1c.
Since we are using serdes driver , no need of mapping serdes register
space into DP driver.
Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: Hyun Kwon <hyunk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Hyun Kwon [Fri, 15 Jul 2016 00:42:44 +0000 (17:42 -0700)]
ARM64: zynqmp: drm: Add DMA index
Each plane can be associated with multiple DMA channels. So add
index for each DMA channel.
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 20 Oct 2016 08:26:13 +0000 (10:26 +0200)]
ARM64: zynqmp: Sync gpio node properties
Keep dtsi in sync with mainline kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 9 Aug 2016 13:06:58 +0000 (15:06 +0200)]
ARM64: zynqmp: Remove xlnx,id property
Remove unused xlnx,id property because it is not the part of
DT binding.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Bharat Kumar Gogada [Tue, 19 Jul 2016 15:19:29 +0000 (20:49 +0530)]
ARM64: zynqmp: pci: Updating device tree as per upstream
Updating required device tree changes as per mainlined driver
from 4.6 kernel.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Filip Drazic [Mon, 29 Aug 2016 17:32:59 +0000 (19:32 +0200)]
ARM64: zynqmp: Support for multiple PM IDs assigned to a PM domain
Previously, it was assumed that there is a 1:1 mapping between
PM ID defined in the platform firmware and a PM domain. However, there
can be a situation where multiple PM IDs belong to a single PM domain
(e.g. PM IDs for GPU and two pixel processors correspond to a single
PM domain).
This patch adds support for assigning more than one PM ID to
a single PM domain.
Updated documentation accordingly.
Assigned pixel processors PM IDs to GPU PM domain.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Filip Drazic [Mon, 29 Aug 2016 17:32:56 +0000 (19:32 +0200)]
ARM64: zynqmp: DT: Add PM domains for GPU and PCIE
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Filip Drazic [Thu, 25 Aug 2016 16:58:51 +0000 (18:58 +0200)]
ARM64: zynqmp: DT: Remove unused PM domains for PLL
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Filip Drazic [Thu, 25 Aug 2016 16:58:49 +0000 (18:58 +0200)]
ARM64: zynqmp: DT: Remove unused DDR PM domain
DDR power states are handled by the PM firmware, so this domain is
redundant. Also, since there is no device using this PM domain,
it will be powered off during boot, which is wrong.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 19 Oct 2016 14:07:58 +0000 (16:07 +0200)]
ARM64: zynqmp: Remove note about level shifter on zcu102
i2c device is just level shifter. Remove reference from dts.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 9 Sep 2016 06:46:39 +0000 (08:46 +0200)]
ARM64: zynqmp: Add dcc port to dtsi
Add dcc to dtsi for supporting system without serial port.
DCC is enabled by default on ZynqMP.
Adding dcc to zcu100 and zcu102 which were tested.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 25 May 2016 18:09:35 +0000 (20:09 +0200)]
ARM64: zynqmp: Add gpio-keys for zcu102
There is gpio push button on MIO22. Add it to DTS to have full board
description.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 20 Apr 2016 11:12:25 +0000 (13:12 +0200)]
ARM64: zynqmp: Enable gpio-led as heartbeat on zcu102
Show user that Linux is alive on the board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Naga Sureshkumar Relli [Tue, 12 Apr 2016 06:16:11 +0000 (11:46 +0530)]
ARM64: zynqmp: Enable can1 for ep108
This patch enables can1 for ep108.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
VNSL Durga [Mon, 11 Apr 2016 12:13:47 +0000 (17:43 +0530)]
ARM64: zynqmp: Added clocks to DT for ep108
Added clks for ep108 platform.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Kedareswara rao Appana [Fri, 9 Sep 2016 07:06:00 +0000 (12:36 +0530)]
ARM64: zynqmp: Add clocks for LPDDMA
Zynqmp DMA driver expects two clocks (main clock and apb clock)
LPDDMA clock cofiguration is missing for the same in the
zynqmp-clk.dtsi file.
This patch updates for the same.
Reported-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 11 Nov 2016 12:21:04 +0000 (13:21 +0100)]
ARM64: zynqmp: Remove DTC 1.4.2 warnings
DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /amba has a reg or ranges property,
but no unit name
Warning (unit_address_vs_reg): Node /amba/usb@
fe200000 has a unit name,
but no reg property
Warning (unit_address_vs_reg): Node /amba/usb@
fe300000 has a unit name,
but no reg property
Warning (unit_address_vs_reg): Node
/amba/dma@
fd4c0000/dma-video0channel@
fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@
fd4c0000/dma-video1channel@
fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@
fd4c0000/dma-video2channel@
fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@
fd4c0000/dma-graphicschannel@
fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@
fd4c0000/dma-audio0channel@
fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@
fd4c0000/dma-audio1channel@
fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
This patch is fixing them.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 11 Nov 2016 12:11:37 +0000 (13:11 +0100)]
ARM: zynq: Remove DTC 1.4.2 warnings
DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property,
but no unit name
Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name,
but no reg property
This patch is fixing them.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Tue, 1 Nov 2016 18:19:53 +0000 (23:49 +0530)]
ARM64: zynqmp: Correct the sdhci minimum frequency for ep108
Correct the sdhci minimum frequency for ep platform.
It should be right shift instead of left shift operand.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 14 Jul 2016 09:13:04 +0000 (11:13 +0200)]
ARM64: zynqmp: Ignore warnings from autogenerated files
Autogenerated files contain casting issues and missing function
declaration and even usleep implementation. Suppress them for now
till these files are fixed.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 25 Oct 2016 09:43:02 +0000 (11:43 +0200)]
ARM64: zynqmp: Fix secondary bootmode enabling
Do not setup use_alt bit which copy alternative boot mode to
boot mode. The reason is that this bit is cleared after POR
but not after any software reset which will cause
that after SW reset bootrom will look for different boot image.
This patch setups alternative boot mode selection (purely SW
handling) and extends code to read this alternative boot mode first and
use it if it is setup.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Wed, 21 Sep 2016 06:15:05 +0000 (11:45 +0530)]
ARM64: zynqmp: Add support for SD1 with level shifters bootmode
Add support for SD1 with level shifters bootmode.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 1 Sep 2016 09:27:32 +0000 (11:27 +0200)]
ARM64: zynqmp: Record board name as serial number for DFU/FASTBOOT
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Soren Brinkmann [Thu, 29 Sep 2016 18:44:41 +0000 (11:44 -0700)]
ARM64: zynqmp: Adjust to new SMC interface to get silicon version
The new FW interface returns the IDCODE and version register, leaving
extracting bitfields to the caller.
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 18 Oct 2016 14:10:25 +0000 (16:10 +0200)]
ARM: zynq: Add support for Zynq 7000S 7007s/7012s/7014s devices
Zynq 7000S (Single A9 core) devices is using different ID code.
This patch adds this new codes and assign them.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Mon, 16 May 2016 10:01:38 +0000 (15:31 +0530)]
net: zynq_gem: Correct SGMII enable bit setting
Correct the SGMII enable bit position to 27 instead
of 31.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>