stroese [Fri, 23 May 2003 11:28:55 +0000 (11:28 +0000)]
BUBINGA405EP board added (IBM PPC405EP Eval Board).
stroese [Fri, 23 May 2003 11:27:18 +0000 (11:27 +0000)]
ASH405 board added (PPC405EP based).
stroese [Fri, 23 May 2003 11:25:57 +0000 (11:25 +0000)]
- PPC405EP support added.
- CONFIG_UART1_CONSOLE added (see README).
stroese [Fri, 23 May 2003 11:18:02 +0000 (11:18 +0000)]
PPC405EP support added.
stroese [Fri, 23 May 2003 11:16:49 +0000 (11:16 +0000)]
- PPC405EP support added.
- "nand_init" (NAND FLASH) added.
wdenk [Thu, 22 May 2003 22:52:13 +0000 (22:52 +0000)]
* Patch by Dave Ellis, 22 May 2003:
Fix problem with only partially cleared .bss segment
* Patch by Rune Torgersen, 12 May 2003:
get PCI to work on a MPC8266ADS board; incorporate change to
cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
wdenk [Wed, 21 May 2003 20:26:20 +0000 (20:26 +0000)]
Add support for arbitrary bitmaps for TRAB's VFD command;
allow to pass boot bitmap addresses in environment variables;
allow for zero boot delay
wdenk [Tue, 20 May 2003 20:49:01 +0000 (20:49 +0000)]
* Add support for arbitrary bitmaps for TRAB's VFD command
* Patch by Christian Geißinger, 19 May 2002:
On TRAB: wait until the dummy byte has been completely sent
wdenk [Tue, 20 May 2003 14:25:27 +0000 (14:25 +0000)]
* Patch by David Updegraff, 22 Apr 2003:
update for CrayL1 board
* Patch by Pantelis Antoniou, 21 Apr 2003:
add boot support for ARTOS (a proprietary OS)
* Patch by Steven Scholz, 11 Apr 2003:
Add support for RTC DS1338
* Patch by Rod Boyce, 24 Jan 2003:
Fix counting of extended partitions in diskboot command
wdenk [Tue, 20 May 2003 10:58:04 +0000 (10:58 +0000)]
Patch by Christophe Lindheimer, 20 May 2003:
allow the use of CFG_LOADS when CFG_NO_FLASH is set
wdenk [Tue, 20 May 2003 10:39:44 +0000 (10:39 +0000)]
Fix SDRAM timing on Purple board
wdenk [Sun, 18 May 2003 11:30:09 +0000 (11:30 +0000)]
Add support for CompactFlash on ATC board
(includes support for Intel 82365 and compatible PC Card controllers,
and Yenta-compatible PCI-to-CardBus controllers)
wdenk [Mon, 12 May 2003 21:50:16 +0000 (21:50 +0000)]
Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
wdenk [Mon, 12 May 2003 09:51:52 +0000 (09:51 +0000)]
Fix SDRAM initialization
wdenk [Mon, 12 May 2003 09:51:00 +0000 (09:51 +0000)]
Add default switch settings.
wdenk [Mon, 5 May 2003 17:09:41 +0000 (17:09 +0000)]
Fix ATC board configuration and flash driver
wdenk [Sat, 3 May 2003 23:33:47 +0000 (23:33 +0000)]
Fix problem with usage of "true" (undefined in current versions of bfd.h)
wdenk [Sat, 3 May 2003 15:50:43 +0000 (15:50 +0000)]
* Add support for Promess ATC board
* Patch by Keith Outwater, 28 Apr 2003:
- Miscellaneous corrections and additions to GEN860T board specific code.
- Added GEN860_SC variant to GEN860T.
- Miscellaneous corrections to GEN860T documentation.
- Correct duplicate entry in U-Boot CREDITS file.
- Add GEN860T_SC entry in MAINTAINERS file.
- Update CREDITS file with GEN860T_SC info.
* Update Smiths Aerospace addresses in MAINTAINERS file
* Fix error handling in hush's version of "run" command
wdenk [Sun, 27 Apr 2003 22:52:51 +0000 (22:52 +0000)]
* LWMON extensions:
- Splashscreen support
- modem support
- sysmon support
- temperature dependend enabling of LCD
* Allow booting from old "PPCBoot" disk partitions
* Add support for TQM8255 Board / MPC8255 CPU
wdenk [Sun, 20 Apr 2003 17:41:25 +0000 (17:41 +0000)]
*** empty log message ***
wdenk [Sun, 20 Apr 2003 17:26:01 +0000 (17:26 +0000)]
Make compile clean
wdenk [Sun, 20 Apr 2003 16:52:09 +0000 (16:52 +0000)]
Add files needed for bitmap load support
wdenk [Sun, 20 Apr 2003 16:49:37 +0000 (16:49 +0000)]
Compile fixes
wdenk [Sun, 20 Apr 2003 14:04:18 +0000 (14:04 +0000)]
* Make sure Block Lock Bits get cleared in R360MPI flash driver
* MPC823 LCD driver: Fill color map backwards, to allow for steady
display when Linux takes over
* Patch by Erwin Rol, 27 Feb 2003:
Add support for RTEMS (this time for real).
* Add support for "bmp info" and "bmp display" commands to load
bitmap images; this can be used (for example in a "preboot"
command) to display a splash screen very quickly after poweron.
* Add support for 133 MHz clock on INCA-IP board
wdenk [Sat, 12 Apr 2003 23:38:12 +0000 (23:38 +0000)]
* Patch by Lutz Dennig, 10 Apr 2003:
Update for R360MPI board
* Add new meaning to "autostart" environment variable:
If set to "no", a standalone image passed to the
"bootm" command will be copied to the load address
(and eventually uncompressed), but NOT be started.
This can be used to load and uncompress arbitrary
data.
* Set max brightness for MN11236 displays on TRAB board
stroese [Thu, 10 Apr 2003 13:30:28 +0000 (13:30 +0000)]
Patch from Stefan Roese.
stroese [Thu, 10 Apr 2003 13:26:44 +0000 (13:26 +0000)]
Changed DHCP client to use ip address from server option field #54 from the OFFER-paket in the server option field #54 in the REQUEST-paket. This fixes a problem using a Windows 2000 DHCP server, where the DHCP-server is not the TFTP-server.
wdenk [Thu, 10 Apr 2003 11:18:18 +0000 (11:18 +0000)]
Add support for TQM862L modules
wdenk [Tue, 8 Apr 2003 23:25:21 +0000 (23:25 +0000)]
Prepare for 0.3.0 release
* Add support for Purple Board (MIPS64 5Kc)
* Add support for MIPS64 5Kc CPUs
wdenk [Sat, 5 Apr 2003 00:53:31 +0000 (00:53 +0000)]
* Patch by Arun Dharankar, 4 Apr 2003:
Add IDMA example code (tested on 8260 only)
* Add support for Purple Board (MIPS64 5Kc)
* Add support for MIPS64 5Kc CPUs
* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
* Patch by Denis Peter, 04 Apr 2003:
- update MIP405-4 board
* Patches by Denis Peter, 03 April 2003:
- fix PCI IRQs on MPL boards
- fix two more un-relocated pointer problems
* Fix behaviour of "run" command:
- print error message iv variable does not exist
- terminate processing of arguments in case of error
* Patches by Peter Figuli, 10 Mar 2003
- Add support for BTUART on PXA platform
- Add support for WEP EP250 (PXA) board
* Fix flash problems on INCA-IP; add tool to allow bruning images to
flash using a BDI2000
* Implement fix for I2C Edge Conditions problem for all boards that
use the bit-banging driver (common/soft_i2c.c)
* Add patches by Robert Schwebel, 31 Mar 2003:
- csb226 board: bring in sync with innokom/memsetup.S
- csb226 board: fix MDREFR handling
- misc doc fixes / extensions
- innokom board: cleanup, MDREFR fix in memsetup.S, config update
- add BOOT_PROGRESS to armlinux.c
stroese [Fri, 4 Apr 2003 16:55:30 +0000 (16:55 +0000)]
Patch from Stefan Roese.
stroese [Fri, 4 Apr 2003 16:52:57 +0000 (16:52 +0000)]
Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
stroese [Fri, 4 Apr 2003 16:48:07 +0000 (16:48 +0000)]
U-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).
stroese [Fri, 4 Apr 2003 16:00:33 +0000 (16:00 +0000)]
Changed PPC405GPr version from A to B.
stroese [Fri, 4 Apr 2003 15:53:41 +0000 (15:53 +0000)]
U-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).
stroese [Fri, 4 Apr 2003 15:44:49 +0000 (15:44 +0000)]
U-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).
wdenk [Mon, 31 Mar 2003 17:27:09 +0000 (17:27 +0000)]
* Patch by Martin Winistoerfer, 23 Mar 2003
- Add port to MPC555/556 microcontrollers
- Add support for cmi customer board with
Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
* Patch by Rick Bronson, 28 Mar 2003:
- fix common/cmd_nand.c
wdenk [Mon, 31 Mar 2003 16:34:49 +0000 (16:34 +0000)]
* Patch by Arun Dharankar, 24 Mar 2003:
- add threads / scheduler example code
* Add patches by Robert Schwebel, 31 Mar 2003:
- add ctrl-c support for kermit download
- align bdinfo output on ARM
* Add CPU ID, version, and clock speed for INCA-IP
wdenk [Fri, 28 Mar 2003 14:40:36 +0000 (14:40 +0000)]
Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
- fix SRAM and SDRAM memory sizing
- add status LED support
- add MAC address for second (SCC1) ethernet port
Update default environment for TQM8260 board
wdenk [Thu, 27 Mar 2003 18:00:16 +0000 (18:00 +0000)]
Fix MIPS build problem
wdenk [Thu, 27 Mar 2003 12:09:35 +0000 (12:09 +0000)]
* Add support for MIPS32 4Kc CPUs
* Add support for INCA-IP Board
wdenk [Wed, 26 Mar 2003 11:42:53 +0000 (11:42 +0000)]
Make compile clean, fix the usual small problems.
stroese [Wed, 26 Mar 2003 10:36:12 +0000 (10:36 +0000)]
esd PCI405 updated.
wdenk [Wed, 26 Mar 2003 06:55:25 +0000 (06:55 +0000)]
* Patch by Rick Bronson, 16 Mar 2003:
Add support for Atmel AT91RM9200DK w/NAND
* Patches by Robert Schwebel, 19 Mar 2003:
- use arm-linux-gcc as default compiler for ARM
- fix i2c fixup code
- fix missing baudrate setting
- added $loadaddr / CFG_LOAD_ADDR support to loadb
- moved "ignoring trailing characters" _before_ u-boot wants to
print out diagnostics messages; removes bogus characters at the
end of transmission
* Patch by John Zhan, 18 Mar 2003:
Add support for SinoVee Microsystems SC8xx boards
* Patch by Rolf Offermanns, 21 Mar 2003:
ported the dnp1110 related changes from the current armboot cvs to
current u-boot cvs. smc91111 does not work. problem marked in
smc91111.c, grep for "FIXME".
* Patch by Brian Auld, 25 Mar 2003:
Add support for STM flash chips on ebony board
* Add PCI support for MPC8250 Boards (PM825 module)
* Patch by Stefan Roese, 25 Mar 2003:
wdenk [Tue, 25 Mar 2003 18:06:06 +0000 (18:06 +0000)]
*** empty log message ***
wdenk [Tue, 25 Mar 2003 16:50:56 +0000 (16:50 +0000)]
Add PCI support for MPC8250 Boards (PM825 module)
stroese [Tue, 25 Mar 2003 14:44:48 +0000 (14:44 +0000)]
Patch by Stefan Roese , 25 Mar 2003.
stroese [Tue, 25 Mar 2003 14:43:01 +0000 (14:43 +0000)]
BSP-Command for esd PCI405 added.
stroese [Tue, 25 Mar 2003 14:41:35 +0000 (14:41 +0000)]
esd PCI405 updated.
stroese [Thu, 20 Mar 2003 15:32:59 +0000 (15:32 +0000)]
Patch by Stefan Roese , 20 Mar 2003.
stroese [Thu, 20 Mar 2003 15:31:19 +0000 (15:31 +0000)]
CPCI4052 update (support for revision 3).
stroese [Thu, 20 Mar 2003 15:27:41 +0000 (15:27 +0000)]
Added edge conditioning register (ecr) for PPC405GPr.
stroese [Thu, 20 Mar 2003 15:25:59 +0000 (15:25 +0000)]
Clip udiv to 5 bits on PPC405 (serial.c).
stroese [Thu, 20 Mar 2003 15:21:50 +0000 (15:21 +0000)]
Set edge conditioning circuitry on PPC405GPr for compatibility to existing PPC405GP designs.
wdenk [Fri, 14 Mar 2003 21:34:25 +0000 (21:34 +0000)]
Add files that were forgotten
wdenk [Fri, 14 Mar 2003 20:47:52 +0000 (20:47 +0000)]
* Avoid flicker on the TRAB's VFD by synchronizing the enable with
the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
boards, version 153 for Rev. 200 boards).
* Patch by Vladimir Gurevich, 12 Mar 2003:
Fix relocation problem of statically initialized string pointers
in common/cmd_pci.c
* Patch by Kai-Uwe Blöm, 12 Mar 2003:
Cleanup & bug fixes for JFFS2 code:
- the memory mangement was broken. It caused havoc on malloc by
writing beyond the block boundaries.
- the length calculation for files was wrong, sometimes resulting
in short file reads.
- data copying now optionally takes fragment version numbers into
account, to avoid copying from older data.
See doc/README.JFFS2 for details.
wdenk [Wed, 12 Mar 2003 10:43:01 +0000 (10:43 +0000)]
Cleanup compiler warning
wdenk [Wed, 12 Mar 2003 10:41:04 +0000 (10:41 +0000)]
* Patch by Josef Wagner, 12 Mar 2003:
- 16/32 MB and 50/80 MHz support with auto-detection for IP860
- ETH05 and BEDBUG support for CU824
- added support for MicroSys CPC45
- new BOOTROM/FLASH0 and DOC base for PM826
* Patch by Robert Schwebel, 12 Mar 2003:
Fix the chpart command on innokom board
* Name cleanup:
mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
s/PPCBoot/U-Boot/ in some files
s/pImage/uImage/ in some files
* Patch by Detlev Zundel, 15 Jan 2003:
Fix '' command line quoting
* Patch by The LEOX team, 19 Jan 2003:
- add support for the ELPT860 board
- add support for Dallas ds164x RTC
wdenk [Thu, 6 Mar 2003 21:55:29 +0000 (21:55 +0000)]
* Patches by David Müller, 31 Jan 2003:
- minimal setup for CardBus bridges
- add EEPROM read/write support in the CS8900 driver
- add support for the builtin I2C controller in the Samsung s3c24x0 chips
- add support for MPL's VCMA9 (Samsung s3c2410 based) board
* Patch by Steven Scholz, 04 Feb 2003:
add support for RTC DS1307
* Patch by Reinhard Meyer, 5 Feb 2003:
fix PLPRCR/SCCR init sequence on 8xx to allow for
changes of EBDF by software
* Patch by Vladimir Gurevich, 07 Feb 2003:
"API-compatibility patch" for 4xx I2C driver
wdenk [Thu, 6 Mar 2003 14:23:06 +0000 (14:23 +0000)]
Fix problem with default #defines
Cleanup compiler warning
wdenk [Thu, 6 Mar 2003 13:39:27 +0000 (13:39 +0000)]
* Patches by Robert Schwebel, 06 Mar 2003:
- fix bug in BOOTP code (must use NetCopyIP)
- update of CSB226 port
- clear BSS segment on XScale
- added support for i2c_init_board() function
- update to the Innokom plattform
* Extend support for redundand environments for configurations where
environment size < sector size
wdenk [Thu, 6 Mar 2003 00:58:30 +0000 (00:58 +0000)]
* Patch by Rune Torgersen, 13 Feb 2003:
Add support for Motorola MPC8266ADS board
* Patch by Kyle Harris, 19 Feb 2003:
patches for the Intel lubbock board:
memsetup.S - general cleanup (based on Robert's csb226 code)
flash.c - overhaul, actually works now
lubbock.c - fix init funcs to return proper value
* Patch by Kenneth Johansson, 26 Feb 2003:
- Fixed off by one in RFTA calculation.
- No need to abort when LDF is lower than we can program it's only
minimum timing so clamp it to what we can do.
- Takes function pointer to function for reading the spd_nvram. Usefull
for faking data or hardcode a module without the nvram.
- fix other user for above change
- fix some comments.
* Patches by Brian Waite, 26 Feb 2003:
- fix port for evb64260 board
- fix PCI for evb64260 board
- fix PCI scan
* Patch by Reinhard Meyer, 1 Mar 2003:
Add support for EMK TOP860 Module
* Patch by Yuli Barcohen, 02 Mar 2003:
Add SPD EEPROM support for MPC8260ADS board
wdenk [Thu, 6 Mar 2003 00:02:04 +0000 (00:02 +0000)]
* Patch by Robert Schwebel, 21 Jan 2003:
- Add support for Innokom board
- Don't complain if "install" fails
- README cleanup (remove duplicated lines)
- Update PXA header files
* Add documentation for existing POST code (doc/README.POST)
* Patch by Laudney Ren, 15 Jan 2003:
Fix handling of redundand environment in "tools/envcrc.c"
* Patch by Detlev Zundel, 28 Feb 2003:
Add bedbug support for 824x systems
* Add support for 16 MB flash configuration of TRAB board
* Patch by Erwin Rol, 27 Feb 2003:
Add support for RTEMS
* Add image information to README
* Fix dual PCMCIA slot support (when running with just one
slot populated)
* Add VFD type detection to trab board
* extend drivers/cs8900.c driver to synchronize ethaddr environment
variable with value in the EEPROM
wdenk [Fri, 28 Feb 2003 00:49:47 +0000 (00:49 +0000)]
* Add support for 16 MB flash configuration of TRAB board
* Patch by Erwin Rol, 27 Feb 2003:
Add support for RTEMS
* Add image information to README
* Fix dual PCMCIA slot support (when running with just one
slot populated)
* Add VFD type detection to trab board
* extend drivers/cs8900.c driver to synchronize ethaddr environment
variable with value in the EEPROM
* Start adding MIPS support files
stroese [Tue, 18 Feb 2003 11:30:24 +0000 (11:30 +0000)]
CPCIISER4 configuration updated.
stroese [Mon, 17 Feb 2003 16:06:06 +0000 (16:06 +0000)]
Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
stroese [Fri, 14 Feb 2003 11:21:23 +0000 (11:21 +0000)]
Add "pcidelay" environment variable (in ms, enabled via CONFIG_PCI_BOOTDELAY).
wdenk [Tue, 11 Feb 2003 01:49:43 +0000 (01:49 +0000)]
Cleanup: remove trailing white space
stroese [Mon, 10 Feb 2003 16:39:00 +0000 (16:39 +0000)]
Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
stroese [Mon, 10 Feb 2003 16:26:37 +0000 (16:26 +0000)]
Added 4MByte and 128MByte onboard SDRAM
wdenk [Fri, 17 Jan 2003 16:27:01 +0000 (16:27 +0000)]
* Add dual ethernet support on PM826
* Add support for LXT971 PHY on PM826
* Patch by Tord Andersson, 16 Jan 2003:
Fix flash sector count for TQM8xxL
* Fix I2C EEPROM problem on ICU862 board (would only write the first
16 bytes out of each 32 byte block)
wdenk [Mon, 13 Jan 2003 23:54:46 +0000 (23:54 +0000)]
Add support for V37 board
(patch by Jón Benediktsson, 11 Dec 2002)
wdenk [Sat, 11 Jan 2003 09:48:40 +0000 (09:48 +0000)]
* Restrict baudrate settings on LWMON to higher speeds
when watchdog is on
* Update baudrate in bd_info when it gets changed
* Add watchdog trigger points while waiting for serial port
(so far only 8xx -- needed on LWMON with 100ms watchdog)
* Improve command line tool to access the U-Boot's environment
(figuration of the utility, using a config file)
wdenk [Thu, 2 Jan 2003 23:57:29 +0000 (23:57 +0000)]
Patch by Detlev Zundel, 30 Dec 2002:
Add single quote support for (old) command line parser
wdenk [Sat, 28 Dec 2002 15:55:42 +0000 (15:55 +0000)]
Adjust LWMON environment to current requirements
wdenk [Fri, 20 Dec 2002 23:42:25 +0000 (23:42 +0000)]
* Switch LWMON board default config from FRAM to EEPROM;
in POST, EEPROM shows up on 8 addresses
wdenk [Tue, 17 Dec 2002 18:07:30 +0000 (18:07 +0000)]
*** empty log message ***
wdenk [Tue, 17 Dec 2002 17:55:09 +0000 (17:55 +0000)]
Prepare for release of version 0.2.0
wdenk [Tue, 17 Dec 2002 01:51:00 +0000 (01:51 +0000)]
* Use 1-byte-read instead of -write for iprobe() function
Add i2c commands to PM826 config
* extend I2C POST code: check for list on known addresses
wdenk [Sun, 8 Dec 2002 09:53:23 +0000 (09:53 +0000)]
* Improve log buffer code; use "loglevel" to decide which messages
to log on the console, too (like in Linux); get rid of "logstart"
wdenk [Sat, 7 Dec 2002 00:20:59 +0000 (00:20 +0000)]
* Patch by Hans-Joerg Frieden, 06 Dec 2002
Fix misc problems with AmigaOne support
* Patch by Chris Hallinan, 3 Dec 2002:
minor cleanup to the MPC8245 EPIC driver
* Patch by Pierre Aubert , 28 Nov 2002
Add support for external (SIU) interrupts on MPC8xx
* Patch by Pierre Aubert , 28 Nov 2002
Fix nested syscalls bug in standalone applications
* Patch by David Müller, 27 Nov 2002:
fix output of "pciinfo" command for CardBus bridge devices.
* Fix bug in TQM8260 board detection - boards got stuck when board ID
was not readable
wdenk [Wed, 4 Dec 2002 23:39:58 +0000 (23:39 +0000)]
Add LED indication for IDE activity on KUP4K board
wdenk [Tue, 3 Dec 2002 21:28:10 +0000 (21:28 +0000)]
* Fix startup problems with VFD display on TRAB
* Patch by Pierre Aubert, 20 Nov 2002
Add driver for Epson SED13806 graphic controller.
Add support for BMP logos in cfb_console driver.
wdenk [Thu, 21 Nov 2002 23:11:29 +0000 (23:11 +0000)]
* Added support for both PCMCIA slots (at the same time!) on MPC8xx
* Patch by Rod Boyce, 21 Nov 2002:
fix PCMCIA on MBX8xx board
* Patch by Pierre Aubert , 21 Nov 2002
Add CFG_CPM_POST_WORD_ADDR to make the offset of the
bootmode word in DPRAM configurable
wdenk [Tue, 19 Nov 2002 23:01:07 +0000 (23:01 +0000)]
* Patch by Daniel Engström, 18 Nov 2002:
Fixes for x86 port (mostly strings issues)
* Patch by Ken Chou, 18 Nov 2002:
Fix for natsemi NIC cards (DP83815)
* Patch by Pierre Aubert, 19 Nov 2002:
fix a bug for the MII configuration, and some warnings
wdenk [Tue, 19 Nov 2002 11:13:06 +0000 (11:13 +0000)]
* Patch by Thomas Frieden, 13 Nov 2002:
Add code for AmigaOne board
(preliminary merge to U-Boot, still WIP)
wdenk [Tue, 19 Nov 2002 11:04:11 +0000 (11:04 +0000)]
* Patch by Thomas Frieden, 13 Nov 2002:
Add code for AmigaOne board
(preliminary merge to U-Boot, still WIP)
* Patch by Jon Diekema, 12 Nov 2002:
- Adding URL for IEEE OUI lookup
- Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
being defined.
- In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
root-on-nfs macros are designed to switch how the default boot
method gets defined.
wdenk [Mon, 18 Nov 2002 00:14:45 +0000 (00:14 +0000)]
* Patch by Daniel Engström, 13 Nov 2002:
Add support for i386 architecture and AMD SC520 board
* Patch by Pierre Aubert, 12 Nov 2002:
Add support for DOS filesystem and booting from DOS floppy disk
wdenk [Mon, 11 Nov 2002 21:14:20 +0000 (21:14 +0000)]
* Patch by Jim Sandoz, 07 Nov 2002:
Increase number of network RX buffers (PKTBUFSRX in
"include/net.h") for EEPRO100 based boards (especially SP8240)
which showed "Receiver is not ready" errors when U-Boot was
processing the receive buffers slower than the network controller
was filling them.
* Get rid of obsolete include/mpc74xx.h
wdenk [Mon, 11 Nov 2002 02:11:37 +0000 (02:11 +0000)]
* Patch by Andreas Oberritter, 09 Nov 2002:
Change behaviour of NetLoop(): return -1 for errors, filesize
otherwise; return code 0 is valid an means no file loaded - in this
case the environment still gets updated!
* Patches by Jon Diekema, 9 Nov 2002:
- improve ADC/DAC clocking on the SACSng board to align
the failing edges of LRCLK and SCLK
- sbc8260 configuration tweaks
- add status LED support for 82xx systems
- wire sspi/sspo commands into command handler; improved error
handlering
- add timestamp support and alternate memory test to the
SACSng configuration
wdenk [Sun, 10 Nov 2002 22:06:23 +0000 (22:06 +0000)]
* Vince Husovsky, 7 Nov 2002:
Add "-n" to linker options to get rid of "Not enough room for
program headers" problem
* Patch by David Müller, 05 Nov 2002
Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
so we can use an already existing name
* Patch by Pierre Aubert, 05 Nov 2002
Hardware related improvements in FDC boot code
* Patch by Holger Schurig, 5 Nov 2002:
Make the PXA really change it's frequency
* Patch by Pierre Aubert, 05 Nov 2002
Add support for slave serial Spartan 2 FPGAs
* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
drivers
wdenk [Tue, 5 Nov 2002 21:01:48 +0000 (21:01 +0000)]
Quick & Dirty fix for log buffer problem when environment is not set
Trigger watchdog when reading the env - this might take a while.
Set debugging baud rate for KUP4K board
wdenk [Tue, 5 Nov 2002 16:35:14 +0000 (16:35 +0000)]
* Add support for log buffer which can be passed to Linux kernel's
syslog mechanism; used especially for POST results.
* Patch by Klaus Heydeck, 31 Oct 2002:
Add initial support for kup4k board
wdenk [Tue, 5 Nov 2002 00:17:55 +0000 (00:17 +0000)]
* Patch by Robert Schwebel, 04 Nov 2002:
- use watchdog to reset PXA250 systems
- added progress callbacks to (some of the) ARM code
- update for Cogent CSB226 board
* Add support for FPS860 board
wdenk [Mon, 4 Nov 2002 16:02:40 +0000 (16:02 +0000)]
Patch by Guillaume Alexandre,, 04 Nov 2002:
Improve PCI access on 32-bits Compact PCI bus
Adjust VFD initialization on TRAB
Cleanup RRvision video code
wdenk [Sun, 3 Nov 2002 18:03:52 +0000 (18:03 +0000)]
* Fix mdelay() on TRAB - this was still the debugging version with
seconds instead of ms.
* Patch by Robert Schwebel, 1 Nov 2002:
XScale related cleanup (affects all ARM boards)
* Cleanup of names, warnings and README.
wdenk [Sun, 3 Nov 2002 17:56:27 +0000 (17:56 +0000)]
* Fix mdelay() on TRAB - this was still the debugging version with
seconds instead of ms.
* Patch by Robert Schwebel, 1 Nov 2002:
XScale related cleanup (affects all ARM boards)
* Cleanup of names, warnings, and README.
wdenk [Sun, 3 Nov 2002 11:32:18 +0000 (11:32 +0000)]
Initial revision
wdenk [Sun, 3 Nov 2002 11:21:28 +0000 (11:21 +0000)]
Initial revision
wdenk [Sun, 3 Nov 2002 11:12:02 +0000 (11:12 +0000)]
Initial revision