Kurt Roeckx [Sun, 30 Nov 2014 14:35:22 +0000 (15:35 +0100)]
Remove SSLv2 support
The only support for SSLv2 left is receiving a SSLv2 compatible client hello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rich Salz [Wed, 3 Dec 2014 15:55:31 +0000 (10:55 -0500)]
New location on website for binaries.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
Matt Caswell [Wed, 3 Dec 2014 09:21:09 +0000 (09:21 +0000)]
Remove "#if 0" code
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Tue, 2 Dec 2014 11:16:35 +0000 (11:16 +0000)]
Only use the fallback mtu after 2 unsuccessful retransmissions if it is less
than the mtu we are already using
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Mon, 1 Dec 2014 23:57:44 +0000 (23:57 +0000)]
Updates to s_client and s_server to remove the constant 28 (for IPv4 header
and UDP header) when setting an mtu. This constant is not always correct (e.g.
if using IPv6). Use the new DTLS_CTRL functions instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Tue, 2 Dec 2014 00:16:55 +0000 (00:16 +0000)]
If we really get a situation where the underlying mtu is less than the minimum
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Mon, 1 Dec 2014 22:18:18 +0000 (22:18 +0000)]
Fix dtls_query_mtu so that it will always either complete with an mtu that is
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Mon, 1 Dec 2014 23:58:05 +0000 (23:58 +0000)]
Remove instances in libssl of the constant 28 (for size of IPv4 header + UDP)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Mon, 1 Dec 2014 23:49:47 +0000 (23:49 +0000)]
There are a number of instances throughout the code where the constant 28 is
used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Mon, 1 Dec 2014 11:41:25 +0000 (11:41 +0000)]
The first call to query the mtu in dtls1_do_write correctly checks that the
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Mon, 1 Dec 2014 11:13:15 +0000 (11:13 +0000)]
The SSL_OP_NO_QUERY_MTU option is supposed to stop the mtu from being
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Mon, 1 Dec 2014 11:10:38 +0000 (11:10 +0000)]
Verify that we have a sensible message len and fail if not
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Kurt Roeckx [Sat, 29 Nov 2014 15:17:54 +0000 (16:17 +0100)]
Use the SSLv23 method by default
If SSLv2 and SSLv3 are both disabled we still support SSL/TLS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rich Salz [Fri, 28 Nov 2014 23:24:53 +0000 (18:24 -0500)]
Remove all .cvsignore files
Reviewed-by: Tim Hudson <tjh@openssl.org>
Richard Levitte [Fri, 28 Nov 2014 22:06:20 +0000 (23:06 +0100)]
Check for FindNextFile when defining it rather than FindFirstFile
Reviewed-by: Matt Caswell <matt@openssl.org>
Richard Levitte [Fri, 28 Nov 2014 19:40:10 +0000 (20:40 +0100)]
[PR3597] Advance to the next state variant when reusing messages.
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Richard Levitte [Fri, 28 Nov 2014 15:31:10 +0000 (16:31 +0100)]
Correct some layout issues, convert all remaining tabs to appropriate amounts of spaces.
Reviewed-by: Matt Caswell <matt@openssl.org>
Alok Menghrajani [Fri, 14 Nov 2014 18:39:41 +0000 (10:39 -0800)]
Improves the proxy certificates howto doc.
The current documentation contains a bunch of spelling and grammar mistakes. I also
found it hard to understand some paragraphs, so here is my attempt to improve its
readability.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Matt Caswell [Thu, 27 Nov 2014 20:32:21 +0000 (20:32 +0000)]
Fix warning in ssl2_enc
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell [Thu, 27 Nov 2014 20:31:59 +0000 (20:31 +0000)]
Remove more references to dtls1_enc
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell [Tue, 18 Nov 2014 15:03:55 +0000 (15:03 +0000)]
Check EVP_Cipher return values for SSL2
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell [Tue, 18 Nov 2014 13:51:20 +0000 (13:51 +0000)]
Delete unused file
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell [Tue, 18 Nov 2014 12:56:26 +0000 (12:56 +0000)]
Add checks to the return value of EVP_Cipher to prevent silent encryption failure.
PR#1767
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell [Thu, 27 Nov 2014 11:06:43 +0000 (11:06 +0000)]
Remove redundant checks in ssl_cert_dup. This was causing spurious error messages when using GOST
PR#3613
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell [Thu, 27 Nov 2014 10:15:47 +0000 (10:15 +0000)]
Tidy up ocsp help output
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
André Guerreiro [Thu, 27 Nov 2014 10:11:33 +0000 (10:11 +0000)]
Add documentation on -timeout option in the ocsp utility
PR#3612
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Guenter [Thu, 27 Nov 2014 13:33:47 +0000 (13:33 +0000)]
NetWare compilation fix.
Workaround for NetWare CodeWarrior compiler which doesn't properly lookup
includes when in same directory as the C file which includes it.
PR#3569
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell [Fri, 12 Sep 2014 05:00:26 +0000 (01:00 -0400)]
Updates to X509_NAME_get_index_by_NID.pod submitted by user Bernardh via the wiki
Minor changes made by Matt Caswell
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Matt Caswell [Sat, 6 Sep 2014 22:48:54 +0000 (23:48 +0100)]
Updates to X509_NAME_add_entry_by_txt.pod submitted by user Bernardh via the wiki
Minor changes made by Matt Caswell.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Matt Caswell [Sat, 6 Sep 2014 22:47:55 +0000 (23:47 +0100)]
Updates to EVP_PKEY_encrypt.pod submitted by user Bernardh via the wiki
Minor changes made by Matt Caswell.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Matt Caswell [Thu, 27 Nov 2014 12:25:18 +0000 (12:25 +0000)]
Add include of ssl.h which is required by srtp.h
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Matt Caswell [Tue, 25 Nov 2014 13:36:00 +0000 (13:36 +0000)]
Fixed memory leak due to incorrect freeing of DTLS reassembly bit mask
PR#3608
Reviewed-by: Tim Hudson <tjh@openssl.org>
Matt Caswell [Tue, 25 Nov 2014 17:23:24 +0000 (17:23 +0000)]
Corrected comments in ssl.h about SSLv23_method and friends
PR#3574
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Dr. Stephen Henson [Thu, 20 Nov 2014 14:50:54 +0000 (14:50 +0000)]
Print out Suite B status.
When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
Dr. Stephen Henson [Thu, 20 Nov 2014 14:06:50 +0000 (14:06 +0000)]
Fix SuiteB chain checking logic.
Reviewed-by: Matt Caswell <matt@openssl.org>
Annie Yousar [Mon, 8 Sep 2014 20:50:03 +0000 (16:50 -0400)]
RT2679: Fix error if keysize too short
In keygen, return KEY_SIZE_TOO_SMALL not INVALID_KEYBITS.
** I also increased the minimum from 256 to 512, which is now
documented in CHANGES file. **
Reviewed-by: Matt Caswell <matt@openssl.org>
Rich Salz [Tue, 9 Sep 2014 17:45:49 +0000 (13:45 -0400)]
RT3488: Update doc for OPENSSL_config
Fix CONF_load_modules to CONF_modules_load.
Document that it calls exit.
Advise against using it now.
Add an error print to stderr.
Reviewed-by: Matt Caswell <matt@openssl.org>
David Benjamin [Thu, 20 Nov 2014 15:22:40 +0000 (16:22 +0100)]
Do not resume a session if the negotiated protocol version does not match
the session's version (server).
See also BoringSSL's commit
bdf5e72f50e25f0e45e825c156168766d8442dde.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Matt Caswell [Wed, 19 Nov 2014 20:09:19 +0000 (20:09 +0000)]
When using EVP_PKEY_derive with a KDF set, a negative error from
ECDH_compute_key is silently ignored and the KDF is run on duff data
Thanks to github user tomykaira for the suggested fix.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Emilia Kasper [Thu, 20 Nov 2014 11:20:02 +0000 (12:20 +0100)]
Clean up CHANGES
Reviewed-by: Matt Caswell <matt@openssl.org>
Emilia Kasper [Wed, 19 Nov 2014 16:01:36 +0000 (17:01 +0100)]
Ensure SSL3_FLAGS_CCS_OK (or d1->change_cipher_spec_ok for DTLS) is reset
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
Emilia Kasper [Wed, 19 Nov 2014 15:40:27 +0000 (16:40 +0100)]
Always require an advertised NewSessionTicket message.
The server must send a NewSessionTicket message if it advertised one
in the ServerHello, so make a missing ticket message an alert
in the client.
An equivalent change was independently made in BoringSSL, see commit
6444287806d801b9a45baf1f6f02a0e3a16e144c.
Reviewed-by: Matt Caswell <matt@openssl.org>
Emilia Kasper [Wed, 19 Nov 2014 15:28:11 +0000 (16:28 +0100)]
Remove ssl3_check_finished.
The client sends a session ID with the session ticket, and uses
the returned ID to detect resumption, so we do not need to peek
at handshake messages: s->hit tells us explicitly if we're resuming.
An equivalent change was independently made in BoringSSL, see commit
407886f589cf2dbaed82db0a44173036c3bc3317.
Reviewed-by: Matt Caswell <matt@openssl.org>
Emilia Kasper [Wed, 19 Nov 2014 14:56:27 +0000 (15:56 +0100)]
Set s->hit when resuming from external pre-shared secret.
The same change was independently made in BoringSSL, see commit
9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67
Reviewed-by: Matt Caswell <matt@openssl.org>
Emilia Kasper [Wed, 19 Nov 2014 14:42:43 +0000 (15:42 +0100)]
Reset s->tlsext_ticket_expected in ssl_scan_serverhello_tlsext.
This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.
Reviewed-by: Matt Caswell <matt@openssl.org>
Matt Caswell [Wed, 19 Nov 2014 16:02:49 +0000 (16:02 +0000)]
Fix s_server -ssl2. Previously this reported "Error setting EC curve"
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Dr. Stephen Henson [Mon, 17 Nov 2014 16:30:51 +0000 (16:30 +0000)]
Fix excert logic.
If no keyfile has been specified use the certificate file instead.
Fix typo: we need to check the chain is not NULL, not the chain file.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit
786370b1b09b919d9306f27336e13783e4fe3fd0)
Dr. Stephen Henson [Wed, 29 Oct 2014 12:51:31 +0000 (12:51 +0000)]
New option no-ssl3-method which removes SSLv3_*method
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Dr. Stephen Henson [Mon, 3 Nov 2014 17:47:11 +0000 (17:47 +0000)]
Only handle RI extension for SSLv3
Don't send or parse any extensions other than RI (which is needed
to handle secure renegotation) for SSLv3.
Reviewed-by: Matt Caswell <matt@openssl.org>
Dr. Stephen Henson [Mon, 17 Nov 2014 16:52:59 +0000 (16:52 +0000)]
Process signature algorithms before deciding on certificate.
The supported signature algorithms extension needs to be processed before
the certificate to use is decided and before a cipher is selected (as the
set of shared signature algorithms supported may impact the choice).
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit
56e8dc542bd693b2dccea8828b3d8e5fc6932d0c)
Conflicts:
ssl/ssl.h
ssl/ssl_err.c
Matt Caswell [Mon, 17 Nov 2014 23:09:05 +0000 (23:09 +0000)]
Added references to RFC 7027
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Dr. Stephen Henson [Mon, 17 Nov 2014 19:39:32 +0000 (19:39 +0000)]
Prevent use of binary curves when OPENSSL_NO_EC2M is defined
Reviewed-by: Matt Caswell <matt@openssl.org>
Matt Caswell [Wed, 12 Nov 2014 10:05:01 +0000 (10:05 +0000)]
Fixed cms-test.pl for no-ec2m
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Matt Caswell [Mon, 10 Nov 2014 23:29:44 +0000 (23:29 +0000)]
Updated comment references to draft-ietf-tls-ecc-12 to refer to RFC4492 instead
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Jan Hykel [Sun, 16 Nov 2014 16:51:17 +0000 (16:51 +0000)]
Don't use msg on error.
Don't attempt to access msg structure if recvmsg returns an error.
PR#3483
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Mike Bland [Wed, 25 Jun 2014 19:28:38 +0000 (15:28 -0400)]
Add whrlpool and camellia .s files to perlasm list
Change-Id: I626d751f19f24df6b967c17498d6189cc0acb96c
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Mike Bland [Sun, 29 Jun 2014 14:00:43 +0000 (10:00 -0400)]
Add missing SRC variable
This is the only Makefile without SRC defined. This change enables a
standard Makefile include directive to cover crypto/jpake/*.d files.
This was automatically applied by AddSrcVarIfNeeded() in:
https://code.google.com/p/mike-bland/source/browse/openssl/update_makefiles.py
Change-Id: I030204a1bc873b5de5b06c8ddc0b94bb224c6650
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Mike Bland [Tue, 24 Jun 2014 17:03:49 +0000 (13:03 -0400)]
Remove redundant test targets outside of test/
These correspond to targets of the same name in test/Makefile that clash when
using the single-makefile build method using GitConfigure and GitMake.
Change-Id: If7e900c75f4341b446608b6916a3d76f202026ea
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Mike Bland [Tue, 24 Jun 2014 04:39:33 +0000 (00:39 -0400)]
Improve variable parsing when generating MINFO
Before this change, variables for which a '=' appeared in the assignment would
be parsed as the entire string up until the final '='. For example:
BUILD_CMD=shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
would result in the variable name "BUILD_CMD=shlib_target". This doesn't
appear to harm the current generation of MINFO, but creates problems for other
Makefile-related work I'm attempting.
Change-Id: I1f3a606d67fd5464bb459e8f36c23b3e967b77e1
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Mike Bland [Sun, 8 Jun 2014 18:58:16 +0000 (14:58 -0400)]
{,darwin64-}debug-test-64-clang Configure targets
These are based on debug-ben-debug-64-clang and is intended to produce
consistent settings for folks involved in the unit testing effort detailed at:
http://wiki.openssl.org/index.php/Unit_Testing
-fsanitize has been removed from the set of clang flags for now. Apparently
clang 3.1, which ships with FreeBSD 9.1, completely ignores -fsanitize. Clang
3.3, which ships with FreeBSD 9.2, compiles with it, but fails to link due to
the absence of libasan:
http://lists.freebsd.org/pipermail/freebsd-hackers/2013-December/043995.html
https://www.mail-archive.com/cfe-commits@cs.uiuc.edu/msg92260.html
http://reviews.llvm.org/D2644
We need -Wno-error=unused-const-variable because of this error:
.../crypto/ec/ec_lib.c:74:19: error: unused variable 'EC_version' [-Werror,-Wunused-const-variable]
static const char EC_version[] = "EC" OPENSSL_VERSION_PTEXT;
Change-Id: I2cba53537137186114c083049ea1233550a741f9
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Mike Bland [Tue, 24 Jun 2014 00:26:30 +0000 (20:26 -0400)]
Emit PERLASM_SCHEME to fix GitMake on OS X
This fixes the errors when trying to assemble .s files using GitMake on OS X.
Change-Id: I2221f558619302d22e0c57d7203173d634155678
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Mike Bland [Mon, 9 Jun 2014 00:27:20 +0000 (20:27 -0400)]
Add cscope.out and .d files to .gitignore
cscope.out is generated by cscope as described in:
http://wiki.openssl.org/index.php/Testing_and_Development_Tools_and_Tips
.d files are compiler-generated Makefile dependency files (e.g. using
'gcc -MMD -MP foo.c').
Change-Id: I2338858a6b6ee0527837d10a8b55cff1689023fd
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Dr. Stephen Henson [Mon, 27 Oct 2014 14:39:37 +0000 (14:39 +0000)]
Additional output for ssltest.
Print out more details of the conection in ssltest specifically:
server certificate curve name for EC, server temporary key (if any)
and peer signing digest.
Reviewed-by: Matt Caswell <matt@openssl.org>
Dr. Stephen Henson [Mon, 27 Oct 2014 14:07:12 +0000 (14:07 +0000)]
Add SSL_CONF support to ssltest.
Add command line support for SSL_CONF: server side arguments are
prefixed by -s_ (e.g. -s_no_ssl3) and client side with -c_.
Reviewed-by: Matt Caswell <matt@openssl.org>
Dr. Stephen Henson [Sat, 1 Nov 2014 00:10:56 +0000 (00:10 +0000)]
Fix cross reference table generator.
If the hash or public key algorithm is "undef" the signature type
will receive special handling and shouldn't be included in the
cross reference table.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Alok Menghrajani [Tue, 11 Nov 2014 22:39:11 +0000 (14:39 -0800)]
Fixes a minor typo in the EVP docs.
Out is the buffer which needs to contain at least inl + cipher_block_size - 1 bytes. Outl
is just an int*.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Michal Bozon [Wed, 12 Nov 2014 15:59:04 +0000 (15:59 +0000)]
Correct timestamp output when clock_precision_digits > 0
PR#3535
Reviewed-by: Stephen Henson <steve@openssl.org>
Matt Caswell [Wed, 12 Nov 2014 11:18:09 +0000 (11:18 +0000)]
Fix free of garbage pointer. PR#3595
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Kurt Roeckx [Mon, 10 Nov 2014 18:03:03 +0000 (19:03 +0100)]
Fix warning about negative unsigned intergers
Reviewed-by: Richard Levitte <levitte@openssl.org>
Russell Coker [Thu, 25 Jun 2009 05:59:32 +0000 (15:59 +1000)]
Fix datarace reported by valgrind/helgrind
This doesn't really fix the datarace but changes it so it can only happens
once. This isn't really a problem since we always just set it to the same
value. We now just stop writing it after the first time.
PR3584, https://bugs.debian.org/534534
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Kurt Roeckx [Wed, 5 Nov 2014 20:35:09 +0000 (21:35 +0100)]
Fix spelling of EECDH
Reviewed-by: Matt Caswell <matt@openssl.org>
Andy Polyakov [Thu, 30 Oct 2014 19:24:29 +0000 (20:24 +0100)]
armv4cpuid.S: fix compilation error in pre-ARMv7 build.
PR: 3474
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Dr. Stephen Henson [Tue, 21 Oct 2014 16:48:38 +0000 (17:48 +0100)]
Fix WIN32 build by disabling bn* calls.
The trial division and probable prime with coprime tests are disabled
on WIN32 builds because they use internal functions not exported from
the WIN32 DLLs.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Andy Polyakov [Wed, 29 Oct 2014 09:57:46 +0000 (10:57 +0100)]
ec/asm/ecp_nistz256-x86_64.pl: fix inconsistency in path handling.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Andy Polyakov [Wed, 29 Oct 2014 09:48:39 +0000 (10:48 +0100)]
md32_common.h: address compiler warning in HOST_c2l.
Reviewed-by: Stephen Henson <steve@openssl.org>
Samuel Neves [Fri, 3 Oct 2014 23:13:36 +0000 (00:13 +0100)]
Use only unsigned arithmetic in constant-time operations
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Emilia Kasper [Tue, 28 Oct 2014 16:35:59 +0000 (17:35 +0100)]
Tighten session ticket handling
Tighten client-side session ticket handling during renegotiation:
ensure that the client only accepts a session ticket if the server sends
the extension anew in the ServerHello. Previously, a TLS client would
reuse the old extension state and thus accept a session ticket if one was
announced in the initial ServerHello.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
Emilia Kasper [Mon, 27 Oct 2014 18:14:40 +0000 (19:14 +0100)]
Add missing CHANGES interval [1.0.1h, 1.0.1i]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Emilia Kasper [Mon, 27 Oct 2014 15:55:29 +0000 (16:55 +0100)]
Sync CHANGES
Reviewed-by: Rich Salz <rsalz@openssl.org>
Emilia Kasper [Mon, 27 Oct 2014 15:25:17 +0000 (16:25 +0100)]
Fix ssltest logic when some protocols are compiled out.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Dr. Stephen Henson [Wed, 8 Oct 2014 23:23:34 +0000 (00:23 +0100)]
Copy negotiated parameters in SSL_set_SSL_CTX.
SSL_set_SSL_CTX is used to change the SSL_CTX for SNI, keep the
supported signature algorithms and raw cipherlist.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Dr. Stephen Henson [Thu, 9 Oct 2014 19:37:27 +0000 (20:37 +0100)]
Process signature algorithms in ClientHello late.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Andy Polyakov [Thu, 23 Oct 2014 14:08:44 +0000 (16:08 +0200)]
ecp_nistz256 update.
Facilitate switch to custom scatter-gather routines. This modification
does not change algorithms, only makes it possible to implement
alternative. This is achieved by a) moving precompute table to assembly
(perlasm parses ecp_nistz256_table.c and is free to rearrange data to
match gathering algorithm); b) adhering to explicit scatter subroutine
(which for now is simply a memcpy). First implementations that will use
this option are 32-bit assembly implementations, ARMv4 and x86, where
equivalent of current read-whole-table-select-single-value algorithm
is too time-consuming. [On side note, switching to scatter-gather on
x86_64 would allow to improve server-side ECDSA performance by ~5%].
Reviewed-by: Bodo Moeller <bodo@openssl.org>
Andy Polyakov [Thu, 23 Oct 2014 14:04:01 +0000 (16:04 +0200)]
Configure: add ios64 target.
Reviewed-by: Steve Marquess <marquess@openssl.org>
Andy Polyakov [Wed, 22 Oct 2014 07:35:51 +0000 (09:35 +0200)]
Add missing credit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Bodo Moeller [Tue, 21 Oct 2014 20:43:08 +0000 (22:43 +0200)]
Fix and improve SSL_MODE_SEND_FALLBACK_SCSV documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Bodo Moeller [Tue, 21 Oct 2014 20:24:42 +0000 (22:24 +0200)]
When processing ClientHello.cipher_suites, don't ignore cipher suites
listed after TLS_FALLBACK_SCSV.
RT: 3575
Reviewed-by: Emilia Kasper <emilia@openssl.org>
Kurt Roeckx [Tue, 21 Oct 2014 18:45:15 +0000 (20:45 +0200)]
Keep old method in case of an unsupported protocol
When we're configured with no-ssl3 and we receive an SSL v3 Client Hello, we set
the method to NULL. We didn't used to do that, and it breaks things. This is a
regression introduced in
62f45cc27d07187b59551e4fad3db4e52ea73f2c. Keep the old
method since the code is not able to deal with a NULL method at this time.
CVE-2014-3569, PR#3571
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Tim Hudson [Mon, 20 Oct 2014 05:12:17 +0000 (15:12 +1000)]
no-ssl2 with no-ssl3 does not mean drop the ssl lib
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Kurt Cancemi [Sun, 28 Sep 2014 19:28:49 +0000 (15:28 -0400)]
RT3547: Add missing static qualifier
Reviewed-by: Ben Laurie <ben@openssl.org>
Tim Hudson [Thu, 25 Sep 2014 06:04:35 +0000 (08:04 +0200)]
Add constant_time_locl.h to HEADERS,
so the Win32 compile picks it up correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Conflicts:
crypto/Makefile
Richard Levitte [Wed, 24 Sep 2014 20:59:37 +0000 (22:59 +0200)]
Include "constant_time_locl.h" rather than "../constant_time_locl.h".
The different -I compiler parameters will take care of the rest...
Reviewed-by: Tim Hudson <tjh@openssl.org>
Conflicts:
crypto/evp/evp_enc.c
crypto/rsa/rsa_oaep.c
crypto/rsa/rsa_pk1.c
Matt Caswell [Wed, 15 Oct 2014 11:22:20 +0000 (12:22 +0100)]
Updates to NEWS file
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
Matt Caswell [Wed, 15 Oct 2014 09:45:32 +0000 (10:45 +0100)]
Updates CHANGES file
Reviewed-by: Bodo Möller <bodo@openssl.org>
Geoff Thorpe [Wed, 15 Oct 2014 07:25:50 +0000 (03:25 -0400)]
Fix no-ssl3 configuration option
CVE-2014-3568
Reviewed-by: Emilia Kasper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Dr. Stephen Henson [Wed, 15 Oct 2014 00:53:55 +0000 (01:53 +0100)]
Fix for session tickets memory leak.
CVE-2014-3567
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Matt Caswell [Wed, 15 Oct 2014 00:23:07 +0000 (01:23 +0100)]
Fix SRTP compile issues for windows
Related to CVE-2014-3513
This fix was developed by the OpenSSL Team
Reviewed-by: Tim Hudson <tjh@openssl.org>
Conflicts:
util/mkdef.pl
util/ssleay.num
Matt Caswell [Wed, 15 Oct 2014 00:03:32 +0000 (01:03 +0100)]
Fix for SRTP Memory Leak
CVE-2014-3513
This issue was reported to OpenSSL on 26th September 2014, based on an original
issue and patch developed by the LibreSSL project. Further analysis of the issue
was performed by the OpenSSL team.
The fix was developed by the OpenSSL team.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Bodo Moeller [Wed, 15 Oct 2014 12:48:14 +0000 (14:48 +0200)]
Fix SSL_R naming inconsistency.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Andy Polyakov [Wed, 15 Oct 2014 09:10:08 +0000 (11:10 +0200)]
aesni-x86_64.pl: make ECB subroutine Windows ABI compliant.
RT: 3553
Reviewed-by: Emilia Kasper <emilia@openssl.org>