SMDK2410: remove unneeded config.mk

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

SMDK2410: activate ARM relocation feature

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

BeagleBoard: fixed typo in typecast

Without this patch, you should get a warning.

Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>

mvsata: issue hard reset on initialization

Before the actual initialization do a hard reset of the SATA port and the
connected device.

changes v1->v2:
 - add comment for udelay

Signed-off-by: Michael Walle <michael@walle.cc>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

VCMA9: use ARM relocation feature to fix build error

Signed-off-by: David Müller <d.mueller@elsoft.ch>

MX31: drop warnings due to missing prototype for mxc_watchdog_reset()

Signed-off-by: Stefano Babic <sbabic@denx.de>

MX5: drop config.mk from efikamx board

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>

MX31: Make get_reset_cause() static and drop unreachable code

get_reset_cause() should not be exported. Drop code in the function
after return statement that can generate warnings due to unreachable code.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.

commit ed59e58 (Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ) made the
definition of CONFIG_SYS_BOOTMAPSZ unnecessary.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <jason.hui@linaro.org>

MX53: Handle silicon revision 2.1 case

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

mx5: board: code clean up for checkboard code

The boot cause code has been factor out to soc common
code,we need drop the part from the board support code

This patch also remove the redundant cpu version print

Signed-off-by: Jason Liu <jason.hui@linaro.org>

MX51: vision2: Fix build for vision2 board.

config.mk should not be used in board directory and should be removed.
Use the same approach for building the image as other MX51/MX53 boards.

After this change vision2 board can be built again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

MX51: vision: Let video mode struct be independant of watchdog.

Currently the fb_videomode struct is only declared if CONFIG_HW_WATCHDOG is defined.

Remove this dependancy and let the video struct always be declared.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

MX53: Add initial support for MX53SMD board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

MX53: support for freescale MX53LOCO board

This patch add initial support for freescale MX53LOCO board.
Network(FEC),SD/MMC,UART have been supported by this patch

Signed-off-by: Jason Liu <jason.hui@linaro.org>

mx5: Fix CONFIG_OF_LIBFDT redefined warning

With the following commit, CONFIG_OF_LIBFDT is redefined.

  2fa8ca98c37d5b1bb0328b19ddb7e9d162cd9683
  Add CONFIG_OF_LIBFDT to more boards.

Remove the duplicated definition to fix CONFIG_OF_LIBFDT redefined
warning.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition

Since the following commit, definition CONFIG_SYS_BOOTMAPSZ is not
needed any more.

  ed59e58786cae9f8afcb575649afc65985beed4d
  Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

mx31pdk: Clean up mx31pdk.h file

No need to use '#define SYMBOL 1' to make it active.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

.gitignore: update list of u-boot.* files and add *.bin

This patch adds additional u-boot.* files mentioned in Makefile,
and adds *.bin since these are deleted as part of "make clean".

Signed-off-by: Eric Cooper <ecc@cmu.edu>

MPC8xx: Make SPD823TS board build again

Commit e59e356 "TFTP: net/tftp.c: add server mode receive" caused the
size of some object files to grow which breaks the manually optimized
linking for the SPD823TS board.  Adjust linker script as needed.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Prepare v2011.06-rc1

Signed-off-by: Wolfgang Denk <wd@denx.de>

Minor coding style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>

net/tftp.c: fix typo

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

TFTP: add tftpsrv command

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

TFTP: net/tftp.c: add server mode receive

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

TFTP: rename STATE_RRQ to STATE_SEND_RRQ

With the upcoming TFTP server implementation, requests can be either
outgoing or incoming, so avoid ambiguities.

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

TFTP: replace "server" with "remote" in local variable names

With the upcoming TFTP server implementation, the remote node can be
either a client or a server, so avoid ambiguities.

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

net/tftp.c: cosmetic: do not initialise statics to 0 or NULL

This removes the following checkpatch issue:
 - ERROR: do not initialise statics to 0 or NULL

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

net/tftp.c: cosmetic: fix indentation

This removes the following checkpatch issue:
 - WARNING: suspect code indent for conditional statements

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

net/tftp.c: cosmetic: trailing statements should be on next line

This removes the following checkpatch issue:
 - ERROR: trailing statements should be on next line

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

net/tftp.c: cosmetic: fix brace issues

This removes the following checkpatch issues:
 - WARNING: braces {} are not necessary for single statement blocks
 - WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

net/tftp.c: cosmetic: do not use assignment in if condition

This removes the following checkpatch issue:
 - ERROR: do not use assignment in if condition.

There is one such error left:

  ERROR: do not use assignment in if condition
  #239: FILE: tftp.c:239:
  + if (!ProhibitMcast
  +  && (Bitmap = malloc(Mapsize))
  +  && eth_get_dev()->mcast) {

which would require an additional nested if to be fixed, resulting in longer
and less readable code.

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

net/tftp.c: cosmetic: fix pointer syntax issues

This removes the following checkpatch issues:
 - ERROR: "foo * bar" should be "foo *bar"
 - ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

net/tftp.c: cosmetic: fix whitespace issues

This removes the following checkpatch issues:
 - ERROR: space prohibited before that close parenthesis ')'
 - ERROR: space required after that ';' (ctx:BxV)
 - ERROR: space required after that ',' (ctx:VxV)
 - ERROR: space required after that ';' (ctx:VxV)
 - ERROR: spaces required around that '<<=' (ctx:VxV)
 - ERROR: spaces required around that '<' (ctx:VxV)
 - ERROR: spaces required around that '=' (ctx:VxV)
 - ERROR: spaces required around that '+=' (ctx:VxV)
 - ERROR: spaces required around that '=' (ctx:VxW)
 - WARNING: please, no spaces at the start of a line
 - WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

net/tftp.c: cosmetic: fix lines over 80 characters

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
  powerpc/85xx: Enable eSPI support on corenet ds boards

km/common: add pnvramsize to default environment

The pnvram size was used later from start scripts in linux. Therefore
it was added to the default environment.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>

km/common: simplify default environment

This is a first step to simplify the default environment. Move all
the environment variables which are only needed for debugging
purpose to textfiles in the scripts directory. In case of debugging
these files can be loaded via tftp into RAM and set via the env import
command. Other variables are identified as obsolete and were removed.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>

km/common: implement boardId HWkey checks as u-boot cmd

BoardId and HWKey are used to identify the HW class of a given board.
The correct values are stored in the inventory eeprom. During creation
time of a boot package the boardId and HWkey for the SW is stored in
the default environment and burned into the flash. During boottime
the values in the inventory and in the environment are compared to
avoid starting of a SW which is not authorized for this board.

Some bootpackages are allowed to run on a set of different boardId
hwKey. In this case the environment variable boardIdListHex was added
to the default environment. In this case the command iterates over the
pair values and compares them with the values read from the inventory
eeprom.

The syntax of such a boardIdListHex value is e.g.: 158_1 159_1 159_2

Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>

MMC: omap_hsmmc.c: Add missing prototype header

Add missing header file to fix compilation warning

omap_hsmmc.c: In function 'omap_mmc_init':
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_family'
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_rev'

introduced by commit "MMC: omap_hsmmc.c: disable
multiblock rw on old rev omap34xx silicon"
(4ca9244d74f146a0605f5bee28a66e39aae88d3e)

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
CC: Andy Fleming <afleming@freescale.com>
CC: John Rigby <john.rigby@linaro.org>

fsl_esdhc: Initialize mmc->b_max

commit 262951(MMC: make b_max unconditional) missed to update fsl_esdhc.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

mmc: enable partition switch function for emmc

For emmc, it may have up to 7 partitions: two boot partitions, one
user partition, one RPMB partition and four general purpose partitions.
(Refer to JESD84-A44.pdf/page 154)

As bootloader may need to read out or reflashing images on those

different partitions, it is better to enable the partition switch with
console command support.

Also for partition would be restore to user partition(part 0) when CMD0
is used, so change mmc_init routine to perform normal initialization
only once for each slot, unless use the rescan command to force init
again.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>

cmd_mmc: eliminate device num in the mmc command

mmc command applied device, like ide and usb...

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>

mmc_spi: generate response for send status command

A "send status" command is added with the commit "mmc: checking
status after commands with R1b response". But the status register
returned from send status command of SPI protocol is different from
that of MMC/SD protocol. We do a simple test and generate a response
in stead of full bit-by-bit translation.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>

powerpc/85xx: add support for env in MMC/SPI on corenet ds boards

Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/85xx: Enable eSPI support on corenet ds boards

Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (40 commits)
  avr32: add ATAG_BOARDINFO
  at91: reworked support for otc570 board
  at91: reworked support for meesc board
  hammerhead: move CONFIG_SYS_TEXT_BASE to header
  mimc200: move CONFIG_SYS_TEXT_BASE to header
  favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header
  atstk100x: move CONFIG_SYS_TEXT_BASE to header
  atngw100: move CONFIG_SYS_TEXT_BASE to header
  mimc200: fix "#define XXXX 1"
  hammerhead: fix "#define XXXX 1"
  favr-32-ezkit: fix "#define XXXX 1"
  atstk1006: fix "#define XXXX 1"
  atstk1004: fix "#define XXXX 1"
  atstk1003: fix "#define XXXX 1"
  atstk1002: fix "#define XXXX 1"
  atngw100: fix "#define XXXX 1"
  avr32: use single linker script
  avr32/config.mk: simplify PLATFORM_RELFLAGS
  avr32: fix linking
  Add support for Bluewater Systems Snapper 9260 and 9G20 modules
  ...

Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

* 'master' of git://git.denx.de/u-boot-nand-flash:
  nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occurance

avr32: add ATAG_BOARDINFO

This patch adds a new ATAG_BORADINFO to U-Boot. This tag is intended to hand
over the bd->bi_board_number to the linux kernel for early stage board
information like a board revision or other kind of board specific decisions
necessary before the linux peripherial drivers are up.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

at91: reworked support for otc570 board

The otc570 board support was broken. Within this opportunity, I completely
reworked the board files.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

at91: reworked support for meesc board

The meesc board support was broken. Within this opportunity, I completely
reworked the board files.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

hammerhead: move CONFIG_SYS_TEXT_BASE to header

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

mimc200: move CONFIG_SYS_TEXT_BASE to header

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

atstk100x: move CONFIG_SYS_TEXT_BASE to header

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

atngw100: move CONFIG_SYS_TEXT_BASE to header

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

mimc200: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

hammerhead: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

favr-32-ezkit: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

atstk1006: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

atstk1004: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

atstk1003: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

atstk1002: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

atngw100: fix "#define XXXX 1"

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

avr32: use single linker script

This patch move the atstk100x linker script to $(CPUDIR) and delete other
pure copies of this file in each board directory.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

avr32/config.mk: simplify PLATFORM_RELFLAGS

This patch removes PLATFORM_RELFLAGS from board specific config.mk files and
define them in arch specific config.mk file.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

avr32: fix linking

This patch fixes following error:

---8<---
avr32-linux-ld: --gc-sections and -r may not be used together
--->8---

Since 8aba9dceebb14144e07d19593111ee3a999c37fc all avr32 boards are broken due
to linking error as seen above.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Add support for Bluewater Systems Snapper 9260 and 9G20 modules

Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

at91: fixed at91sam9263 system file

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

remove __attribute__ ((packed)) in at91 headers

* remove __attribute__ ((packed)) to prevent byte access
  to soc registers in some gcc version

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>

at91rm9200: fix lowlevel_init() SMRDATA size

* use start/end label for initialization tables instead of fix values

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>

AT91: fix timer.c - remove reset_timer()

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: fix at91sam_wdt.c to reworked header files

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: remove LEGACY from at91_rstc.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

ATMEL: fix dataflash (dirty) this file should be converted to struct SoC access

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: change includes from asm/arch/io.h to asm/io.h

and remove the now unused asm/arch-at91/io.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: cleanup at91sam9260_matrix.h to struct SoC access

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

ATMEL: fix related common atmel driver files

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: fix related at91 driver files

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: fix related at91 system/driver files

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: fix related arch-at91 header files

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: cleanup hardware.h, remove memory-map.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: rework at91sam9g45.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: rework at91sam9263.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: rework at91sam9261.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

AT91: rework at91sam9260.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

avr32: fixup definitions to ATMEL_BASE_xxx

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

avr32: rename memory-map.h -> hardware.h

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

nios2: Make STANDALONE_LOAD_ADDR configurable per board

Follow commit 8ae86b76c648d8bef97241c78e2fddb1c4f164d3
which changed the variable name.

Fix this error,
nios2-elf-ld: invalid hex number `-o'

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>

nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occurance

Remove the last CONFIG_SYS_NAND_READ_DELAY occurance from nand_boot.c.
I missed this one in patch a9c847cb [nand_spl: nand_boot.c: Remove
CONFIG_SYS_NAND_READ_DELAY].

This fixes a compile breakage on kilauea_nand for example.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

nand_spl: nand_boot.c: Remove CONFIG_SYS_NAND_READ_DELAY

There are multiple reasons why this define should be removed:

First it saves some space and therefore fixes a problem we have on
the canyonlands_nand and glacier_nand targets right now.

Second, the define was hackish and would most likely not work on all
board using nand_boot.c. Boards not providing a real dev_ready()
function should implement a board specific function instead.

I checked and it seems, that all boards using nand_boot.c right now
already implement a board specific dev_ready() function. So this
patch should not break any boards and will result in smaller
NAND_SPL images.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Tested-by: Sughosh Ganu <urwithsughosh@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

nand_spl: nand_boot.c: Init nand_chip.options to 0

Patch 65a9db7b [nand_spl: Fix large page nand_command()] broke
nand booting on canyonlands. "options" has to be initialized to
0. If not, boards might have the NAND_BUSWIDTH_16 bit set,
resulting in wrong offset calculation.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Alex Waterman <awaterman@dawning.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Decreases code size of the nand_spl

The canyonland boards nand_spl size is just under the maximum 4KByte size. This
patch decreases the size of the nand_spl to make a previous commit - commit
65a9db7be0868be91ba81b9b5bf821de82e6d9b0 - fit in the nand_spl.

Signed-off-by: Alex Waterman <awaterman@dawning.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Revert "Fix building tools alone with host compiler"

This reverts commit bbc6353c740064c8e0741b772376a1a67a1c3f01.
It breaks building on many systems:
...
.../common/env_embedded.c:28:20: fatal error: config.h: No such file or directory
compilation terminated.
.../common/image.c:27:20: fatal error: common.h: No such file or directory
compilation terminated.
.../lib/crc32.c:12:20: fatal error: common.h: No such file or directory
compilation terminated.
.../lib/md5.c:28:22: fatal error: compiler.h: No such file or directory
compilation terminated.
.../lib/sha1.c:33:20: fatal error: common.h: No such file or directory
compilation terminated.

powerpc/mpc8xxx: reword max tCKmin message

Reword "The DIMM max tCKmin is ..." to "The DDR clock is faster than the slowest
DIMM(s) can support". Fixed interger type in printf as well.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/85xx: fix compatible property for the L2 cache node

The compatible property for the L2 cache node (on 85xx systems that don't
have a CPC) was using a value for the property length that did not match
the actual length of the property.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

kwbimage: Fix check variable of checksum

calc_hdrcsum two times are checked. checksumi of exthdr is not checked.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Prafulla Wadaskar <prafulla@marvell.com>

examples: add smc911x_eeprom to clean target

Signed-off-by: Mike Frysinger <vapier@gentoo.org>