oweals/openwrt.git
9 years agoramips: fix Tenda W150M model name
John Crispin [Mon, 17 Aug 2015 05:59:47 +0000 (05:59 +0000)]
ramips: fix Tenda W150M model name

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46625

9 years agoramips: fix Aigale Ai-BR100 dts and profile names
John Crispin [Mon, 17 Aug 2015 05:59:36 +0000 (05:59 +0000)]
ramips: fix Aigale Ai-BR100 dts and profile names

The following patch changes dts filename and profile name for Aigale Ai-BR100 (for consistency).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46624

9 years agoramips: fix Olimex models, images and profiles names
John Crispin [Mon, 17 Aug 2015 05:59:29 +0000 (05:59 +0000)]
ramips: fix Olimex models, images and profiles names

Official names for RT5350F based OLinuXino products are "RT5350F-OLinuXino{,-EVB}" as on official manufacturer website.
The following patch:
 * changes board names from "olinuxino-rt5350f{,-evb}" to "rt5350f-olinuxino{,-evb}"
 * changes filenames of dts and profile files
 * changes image filenames

for Olimex RT5350F-OLinuXino{,-EVB} devices.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46623

9 years agoramips: fix Sitecom WL-341v3 board and image names
John Crispin [Mon, 17 Aug 2015 05:59:12 +0000 (05:59 +0000)]
ramips: fix Sitecom WL-341v3 board and image names

The following patch changes:
 * board name from "wl341v3" to "wl-341v3"
 * dts filename
 * LED names in dts file

for Sitecom WL-341v3 device.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46622

9 years agoramips: fix Argus ATP-52B board and image names
John Crispin [Mon, 17 Aug 2015 05:58:57 +0000 (05:58 +0000)]
ramips: fix Argus ATP-52B board and image names

The following patch:
 * changes board name from "argus-atp52b" to "atp-52b"
 * changes dts filename
 * fixes LED names in dts file and base-files scripts
 * removes manufacturer name from image filename

for Argus ATP-52B device.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46621

9 years agoramips: fix Belkin F7C027 image name
John Crispin [Mon, 17 Aug 2015 05:58:44 +0000 (05:58 +0000)]
ramips: fix Belkin F7C027 image name

This patch removes manufacturer from Belkin F7C027 image name ("belkinf7c027" -> "f7c027").

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46620

9 years agoramips: fix Asus RT-N56U dts filename
John Crispin [Mon, 17 Aug 2015 05:58:35 +0000 (05:58 +0000)]
ramips: fix Asus RT-N56U dts filename

Other Asus RT-N dts files are named "RT-N..." (not "RTN..."), so use the same for RT-N56U.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46619

9 years agoramips: fix UPVEL model names
John Crispin [Mon, 17 Aug 2015 05:58:20 +0000 (05:58 +0000)]
ramips: fix UPVEL model names

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46618

9 years agoramips: fix Xiaomi MiWiFi Mini board, image and profile names
John Crispin [Mon, 17 Aug 2015 05:58:15 +0000 (05:58 +0000)]
ramips: fix Xiaomi MiWiFi Mini board, image and profile names

The following patch:
 * changes board name from "xiaomi-miwifi-mini" to "miwifi-mini"
 * changes filenames of dts and profile
 * fixes LED names in dts file and base-files scripts
 * removes manufacturer name from image filename

for Xiaomi MiWiFi Mini device.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46617

9 years agoramips: fix Asus RP-N53 and Lenovo Y1{, S} image names
John Crispin [Mon, 17 Aug 2015 05:58:07 +0000 (05:58 +0000)]
ramips: fix Asus RP-N53 and Lenovo Y1{, S} image names

This patch:
 * fixes typo (rp_n53 -> rp-n53) in Asus RP-N53 image name
 * removes manufacturer from image names for Lenovo Y1{,S} devices

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46616

9 years agoramips: fix Asus WL-330N{, 3G} boards names
John Crispin [Mon, 17 Aug 2015 05:57:55 +0000 (05:57 +0000)]
ramips: fix Asus WL-330N{, 3G} boards names

There are other Asus boards supported in ramips target, so use the same naming scheme for WL-330N{,3G} boards and their dts files.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46615

9 years agoramips: fix Zbtlink ZBT-WR8305RT board name
John Crispin [Mon, 17 Aug 2015 05:57:41 +0000 (05:57 +0000)]
ramips: fix Zbtlink ZBT-WR8305RT board name

There is another Zbtlink board (ZBT-WA05) supported in ramips target, so use the same naming scheme for ZBT-WR8305RT board and its dts file.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46614

9 years agoramips: fix indentation and other mistakes in .dts{, i} files
John Crispin [Mon, 17 Aug 2015 05:57:18 +0000 (05:57 +0000)]
ramips: fix indentation and other mistakes in .dts{, i} files

The following patch fixes:
 * wrong indentations
 * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
 * duplicate spacings
 * empty lines at end of files and after last child nodes
 * trailing and leading whitespace
 * unnecessary and commented-out code
 * missing empty lines between nodes and between properties and nodes
 * unnecessary empty lines between nodes properties [1]

in .dts{,i} files, for ramips target.

[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46613

9 years agoprocd: fix seccomp build on some architectures
Hauke Mehrtens [Sun, 16 Aug 2015 20:37:47 +0000 (20:37 +0000)]
procd: fix seccomp build on some architectures

fix generating syscall-names.h

Sometimes the syscall number is not defined with a number but with an
offset to an other syscall and then make_syscall_h.sh created some
broken header file.

For example the bit/syscall.h from musl for i386 has this:

  #define __NR_timer_create     259
  #define __NR_timer_settime    (__NR_timer_create+1)

With this patch the resulting array looks like this:

 [259] = "timer_create",
 [(__NR_timer_create+1)] = "timer_settime",

This closes #20195.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46612

9 years agotoolchain: gcc: add gcc 5.2.0
Hauke Mehrtens [Sun, 16 Aug 2015 20:20:36 +0000 (20:20 +0000)]
toolchain: gcc: add gcc 5.2.0

This was boot tested on mipsel32, arm32 and x86 only.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46611

9 years agoubi-utils: fix build with gcc5
Hauke Mehrtens [Sun, 16 Aug 2015 20:16:43 +0000 (20:16 +0000)]
ubi-utils: fix build with gcc5

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46610

9 years agokernel: yaffs2: update to version from 2015-06-02
Hauke Mehrtens [Sat, 15 Aug 2015 17:16:03 +0000 (17:16 +0000)]
kernel: yaffs2: update to version from 2015-06-02

In addition to the update this also fixes compile problems with kernel 4.1.

This closes #20323.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46609

9 years agosunxi: respect CONFIG_TARGET_IMAGES_GZIP
Zoltan Herpai [Sat, 15 Aug 2015 15:10:14 +0000 (15:10 +0000)]
sunxi: respect CONFIG_TARGET_IMAGES_GZIP

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46608

9 years agosunxi: create KDIR_TMP, build boot.img in it
Zoltan Herpai [Sat, 15 Aug 2015 14:56:21 +0000 (14:56 +0000)]
sunxi: create KDIR_TMP, build boot.img in it

It's nice to have a distinction between files which are built during the
normal OpenWrt build process and ones that are created by the ImageBuilder
(like it already exists on some other targets).

This also gives boot.img a profile-specific prefix as it contains profile-
specific data.

KDIR_TMP does not need to be specified since include/image.mk already sets
it.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46607

9 years agosamba36: preserve smbpasswd across sysupgrade
Hauke Mehrtens [Sat, 15 Aug 2015 14:49:06 +0000 (14:49 +0000)]
samba36: preserve smbpasswd across sysupgrade

Add /etc/samba/smbpasswd to list of samba conffiles
thus preserving samba passwords across sysupgrade
by default.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46606

9 years agosunxi: fix uboot install location
Zoltan Herpai [Sat, 15 Aug 2015 14:34:42 +0000 (14:34 +0000)]
sunxi: fix uboot install location

Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix
ImageBuilder. Similar fixes are necessary for many (all?) other uboot
targets.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46605

9 years agosunxi: don't copy DTS files to BIN_DIR
Zoltan Herpai [Sat, 15 Aug 2015 13:39:41 +0000 (13:39 +0000)]
sunxi: don't copy DTS files to BIN_DIR

The DTS files aren't useful (other targets don't copy them either) and
clutter BIN_DIR with files unrelated to the chosen profile.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46604

9 years agotools: xz: update to version 5.2.1
Hauke Mehrtens [Sat, 15 Aug 2015 11:27:11 +0000 (11:27 +0000)]
tools: xz: update to version 5.2.1

This adds support for symbol versioning which is needed on
CentOs/RedHat 7 to fix #20134.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46603

9 years agoipq806x: switch to new image build system
Jonas Gorski [Fri, 14 Aug 2015 15:10:54 +0000 (15:10 +0000)]
ipq806x: switch to new image build system

Switch ipq806x to the new image build system. Image files might change
slightly their names, but the generated files should not change.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46602

9 years agobrcm63xx: move gzip build command to include/image.mk
Jonas Gorski [Fri, 14 Aug 2015 15:10:47 +0000 (15:10 +0000)]
brcm63xx: move gzip build command to include/image.mk

Allow other targets to make use of it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46601

9 years agoimage.mk: add a fit recipe
Jonas Gorski [Fri, 14 Aug 2015 15:10:42 +0000 (15:10 +0000)]
image.mk: add a fit recipe

Add a recipe to build a fit wrapped kernel (and optional dtb).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46600

9 years agoipq806x: disable dma for spi on linux 4.1 as well
Jonas Gorski [Fri, 14 Aug 2015 15:10:11 +0000 (15:10 +0000)]
ipq806x: disable dma for spi on linux 4.1 as well

Linux 4.1 is also affected from the dma issue, so remove the dma
proprties there as well.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46599

9 years agokernel: update 4.1 to 4.1.5
Jonas Gorski [Fri, 14 Aug 2015 13:06:33 +0000 (13:06 +0000)]
kernel: update 4.1 to 4.1.5

Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46598

9 years agoimage.mk: store the device name variable
Jonas Gorski [Fri, 14 Aug 2015 13:05:22 +0000 (13:05 +0000)]
image.mk: store the device name variable

Make the device name accessible for any build commands instead of
forcing targets to define it themselves.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46597

9 years agoimage.mk: replace all Build/netgear-chk with a generic implementation
Jonas Gorski [Fri, 14 Aug 2015 13:05:14 +0000 (13:05 +0000)]
image.mk: replace all Build/netgear-chk with a generic implementation

Instead of letting each target define it themselves, create on in
include/image.mk and let the targets use it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46596

9 years agobrcm63xx: prefix netgear specific device variables with NETGEAR_
Jonas Gorski [Fri, 14 Aug 2015 13:04:43 +0000 (13:04 +0000)]
brcm63xx: prefix netgear specific device variables with NETGEAR_

Rename BOARD_ID to NETGEAR_BOARD_ID.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46595

9 years agobrcm47xx: prefix netgear specific device variables with NETGEAR_
Jonas Gorski [Fri, 14 Aug 2015 13:04:22 +0000 (13:04 +0000)]
brcm47xx: prefix netgear specific device variables with NETGEAR_

Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46594

9 years agobcm53xx: prefix netgear specific device variables with NETGEAR_
Jonas Gorski [Fri, 14 Aug 2015 13:03:36 +0000 (13:03 +0000)]
bcm53xx: prefix netgear specific device variables with NETGEAR_

Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46593

9 years agoimage.mk: move KDIR_TMP definition to a central location
Jonas Gorski [Fri, 14 Aug 2015 10:20:53 +0000 (10:20 +0000)]
image.mk: move KDIR_TMP definition to a central location

Instead of each target defining it the same, move the KDIR_TMP
definition to include/image.mk. In addition Image/Build/SysupgradeNAND
already requires KDIR_TMP to be set, so it makes sense to have it
globally defined.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46592

9 years agoimage: fix handling of per-device kernel build commands
Felix Fietkau [Thu, 13 Aug 2015 19:02:26 +0000 (19:02 +0000)]
image: fix handling of per-device kernel build commands

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46589

9 years agooprofile: fix path to kernel headers
Felix Fietkau [Thu, 13 Aug 2015 19:02:21 +0000 (19:02 +0000)]
oprofile: fix path to kernel headers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46588

9 years agoipq806x: disable DMA on the SPI flash
Felix Fietkau [Thu, 13 Aug 2015 19:02:16 +0000 (19:02 +0000)]
ipq806x: disable DMA on the SPI flash

Previous patch 6f2905eeb6ce5ddec8d12d677e1f377a940b537b enabled ADM in
the kernel, which causes a kernel panic when accessing the SPI flash.

As a workaround, We'll disable DMA for the flash for now. It was not
enabled previously anyway so we'll just leave it as is.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46587

9 years agobrcm47xx: fix reading WGT634U CFE variables
Rafał Miłecki [Wed, 12 Aug 2015 13:29:22 +0000 (13:29 +0000)]
brcm47xx: fix reading WGT634U CFE variables

We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46584

9 years agobase-files: buttons: make power script return 0
Rafał Miłecki [Wed, 12 Aug 2015 00:57:53 +0000 (00:57 +0000)]
base-files: buttons: make power script return 0

It was missed in the r46471.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46582

9 years agoprocd: switch buttons to the new "button" hotplug handler
Rafał Miłecki [Mon, 10 Aug 2015 22:48:07 +0000 (22:48 +0000)]
procd: switch buttons to the new "button" hotplug handler

This allows requesting "timeout" ACTION in script by returning a
positive value.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46580

9 years agoprocd: update to the latest version, add "button" hotplug handler
Rafał Miłecki [Mon, 10 Aug 2015 21:56:54 +0000 (21:56 +0000)]
procd: update to the latest version, add "button" hotplug handler

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46578

9 years agokernel: crypto: fix depends in kmod-crypto-hmac
Hauke Mehrtens [Sun, 9 Aug 2015 17:18:10 +0000 (17:18 +0000)]
kernel: crypto: fix depends in kmod-crypto-hmac

This module had two depends lines.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46576

9 years agokernel: crypto: fix module loading of cryptomgr.ko
Hauke Mehrtens [Sun, 9 Aug 2015 17:17:51 +0000 (17:17 +0000)]
kernel: crypto: fix module loading of cryptomgr.ko

There was no rule to load this module.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46575

9 years agokernel: crypto: fix module loading of aead.ko
Hauke Mehrtens [Sun, 9 Aug 2015 17:17:31 +0000 (17:17 +0000)]
kernel: crypto: fix module loading of aead.ko

The name of the module was wrong before.

This should fix #20283.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46574

9 years agokernel: add missing symbols for 4.1
Zoltan Herpai [Sun, 9 Aug 2015 15:12:07 +0000 (15:12 +0000)]
kernel: add missing symbols for 4.1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46573

9 years agoar71xx: export some clock functions used by some modules
Hauke Mehrtens [Sun, 9 Aug 2015 12:36:24 +0000 (12:36 +0000)]
ar71xx: export some clock functions used by some modules

This fixes this linking problem:

ERROR: "clk_set_rate" [drivers/usb/phy/phy-generic.ko] undefined!
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!
ERROR: "clk_set_rate" [drivers/media/v4l2-core/videodev.ko] undefined!

In the upstream kernel it is fixed here:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=411520af8ec9456886359b42628e583ac58e7e44

This closes: #20162, #20172, #20196, #20197, #20202 and #20308

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46572

9 years agosunxi: add support for 4.1
Zoltan Herpai [Sun, 9 Aug 2015 12:25:18 +0000 (12:25 +0000)]
sunxi: add support for 4.1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46571

9 years agokernel: update 3.18 to 3.18.20
Hauke Mehrtens [Sun, 9 Aug 2015 11:09:52 +0000 (11:09 +0000)]
kernel: update 3.18 to 3.18.20

Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46570

9 years agoipq806x: enable NAND flash support in the kernel
Felix Fietkau [Fri, 7 Aug 2015 08:36:36 +0000 (08:36 +0000)]
ipq806x: enable NAND flash support in the kernel

Previous patch set backported the recently posted NAND flash driver to
3.18 and 4.1 kernel. This patch now enables it in the kernel config.

There is no change to the partition layout and init yet. But the NAND
flash can be seen in the mtd list on an AP148:

root@OpenWrt:/# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 10000000 00020000 "qcom-nandc"
...

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46569

9 years agoipq806x: add NAND flash controller support
Felix Fietkau [Fri, 7 Aug 2015 08:36:31 +0000 (08:36 +0000)]
ipq806x: add NAND flash controller support

These patches add support for ipq806x NAND flash controller. Most of
these are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/8/3/16

This patch just modifies the kernel code, but doesn't change the config.
It should be harmless.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46568

9 years agoipq806x: Add ADM support
Felix Fietkau [Fri, 7 Aug 2015 08:36:16 +0000 (08:36 +0000)]
ipq806x: Add ADM support

These are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/3/17/19

They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are
applying changes merged since 3.18; they enable mechanisms used by the
ADM driver.

ADM engine is used by the NAND controller, so it is necessary to
bring-up NAND flash support.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46567

9 years agomac80211: mwl8k: init devices synchronously
Jonas Gorski [Wed, 5 Aug 2015 13:56:20 +0000 (13:56 +0000)]
mac80211: mwl8k: init devices synchronously

Make sure phys are probed and present before we detect wifis.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46566

9 years agokirkwood: add wpad-mini to router profiles
Jonas Gorski [Wed, 5 Aug 2015 13:56:02 +0000 (13:56 +0000)]
kirkwood: add wpad-mini to router profiles

Without it the wifi isn't really usable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46565

9 years agoimage: fix jffs2(_nand) image generation
Jonas Gorski [Wed, 5 Aug 2015 13:55:52 +0000 (13:55 +0000)]
image: fix jffs2(_nand) image generation

Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.

Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46564

9 years agobrcm63xx: fix crash on 6358/6368 when booting from thread 1
Jonas Gorski [Wed, 5 Aug 2015 13:55:42 +0000 (13:55 +0000)]
brcm63xx: fix crash on 6358/6368 when booting from thread 1

It looks like RAC flushes cause random corruption(?) when the
second thread is set as default.

Fixes #20160.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46563

9 years agobrcm63xx: Add support for Plusnet 2704N
Jonas Gorski [Wed, 5 Aug 2015 13:55:37 +0000 (13:55 +0000)]
brcm63xx: Add support for Plusnet 2704N

BCM6318: add support for Plusnet / Sagem 2704N (V1)
Signed-off-by: Matt Goring <matt.goring@googlemail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46562

9 years agobrcm63xx: build image for DSL-275XB D1
Jonas Gorski [Wed, 5 Aug 2015 13:55:18 +0000 (13:55 +0000)]
brcm63xx: build image for DSL-275XB D1

It boots fine, so no reason to not build it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46561

9 years agokernel: update 4.1 to 4.1.4
Jonas Gorski [Wed, 5 Aug 2015 13:55:14 +0000 (13:55 +0000)]
kernel: update 4.1 to 4.1.4

Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46560

9 years agoipq806x: add ethernet (stmmac) support
Felix Fietkau [Tue, 4 Aug 2015 23:10:18 +0000 (23:10 +0000)]
ipq806x: add ethernet (stmmac) support

We forgot to enable the stmmac driver for 4.1 kernel, so ethernet
interfaces don't show-up on this kernel.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46559

9 years agoipq806x: refresh kernel configs
Felix Fietkau [Tue, 4 Aug 2015 23:10:12 +0000 (23:10 +0000)]
ipq806x: refresh kernel configs

Remove options which have been moved into the generic config ever since.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46558

9 years agoipq806x: fix freeze in PCIe code when booting with an old u-boot
Felix Fietkau [Tue, 4 Aug 2015 23:10:03 +0000 (23:10 +0000)]
ipq806x: fix freeze in PCIe code when booting with an old u-boot

Old bootloader (same ones which have DT disabled) don't perform any PCIe
initialization. The consequence is a freeze during PCIe bring-up on
these old u-boot. Same kernel with a newer bootloaders works fine as
they contain the corresponding PCIe init code.

In this change, we'll add the missing init and make sure the kernel
doesn't rely on some preexisting init to get PCIe to work. That includes
the following changes:
*GPIOs: set function & drive strength
*Clocks: add init code for aux & ref clocks
*PCIe driver: additional init of the hardware controller

Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46557

9 years agoipq806x: fix pcie pinmux naming in ipq806x dts
Felix Fietkau [Tue, 4 Aug 2015 23:09:55 +0000 (23:09 +0000)]
ipq806x: fix pcie pinmux naming in ipq806x dts

PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but
the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing
the pinmux numbering to match the controller's one.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46556

9 years agoipq806x: add support for non-dt enabled ap148 bootloader
Felix Fietkau [Tue, 4 Aug 2015 23:09:43 +0000 (23:09 +0000)]
ipq806x: add support for non-dt enabled ap148 bootloader

Certain AP148 platforms (and derivative) use bootloaders which did not
have DT enabled.
In order to support these old platforms, we'll now make the following
modifications:
*explicitely add the memory node in the AP148 DT: this used to be added
 by new u-boot through a run-time patch mechanism. We'll now add it
 explicitely so it works on boots which don't support that feature. New
 boots will have the node twice, the second one will be ignored.
*add the zImage generation next to the FIT image for AP148.

Other platforms using non-DT enabled bootloaders may want to leverage
this zImage code to generate their own firmare as well.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46555

9 years agoipq806x: update bleeding-edge kernel from 4.0 to 4.1
Felix Fietkau [Tue, 4 Aug 2015 23:09:38 +0000 (23:09 +0000)]
ipq806x: update bleeding-edge kernel from 4.0 to 4.1

Default kernel doesn't change and stays on 3.18 for now.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46554

9 years agoar71xx: remove linux 3.18 support
Felix Fietkau [Tue, 4 Aug 2015 23:09:28 +0000 (23:09 +0000)]
ar71xx: remove linux 3.18 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46553

9 years agoacx-mac80211: update git url
Hauke Mehrtens [Mon, 3 Aug 2015 20:49:37 +0000 (20:49 +0000)]
acx-mac80211: update git url

use URL scheme documented at http://sourceforge.net/p/forge/documentation/Git/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46552

9 years agocyassl: the upstream package in version 4.6.0 changed
Hauke Mehrtens [Mon, 3 Aug 2015 20:34:28 +0000 (20:34 +0000)]
cyassl: the upstream package in version 4.6.0 changed

Update the md5sum to the new version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46551

9 years agodnsmasq: Bump to dnsmasq2.75
Hauke Mehrtens [Mon, 3 Aug 2015 20:33:57 +0000 (20:33 +0000)]
dnsmasq: Bump to dnsmasq2.75

Fixes a 100% cpu usage issue if using dhcp-script.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46550

9 years agoar71xx: Fix gpio_count setting for QCA953x in ath79_gpio_output_select
Felix Fietkau [Sun, 2 Aug 2015 15:30:35 +0000 (15:30 +0000)]
ar71xx: Fix gpio_count setting for QCA953x in ath79_gpio_output_select

Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46547

9 years agoramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500
Felix Fietkau [Sun, 2 Aug 2015 15:08:14 +0000 (15:08 +0000)]
ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500

This patch fixes weak radio signal reported by nikola.georgiev

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46545

9 years agoar71xx: fix lzma-loader kernel command line passing
Felix Fietkau [Sun, 2 Aug 2015 15:06:54 +0000 (15:06 +0000)]
ar71xx: fix lzma-loader kernel command line passing

The generic kernel cmdline parser ignores argv[0], this caused a
regression for all lzma-loader based boards with linux 4.1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46544

9 years agobuild: disable kernel stack protector support for i386/x86_64
Felix Fietkau [Sun, 2 Aug 2015 07:40:12 +0000 (07:40 +0000)]
build: disable kernel stack protector support for i386/x86_64

When stack protector support is disabled in libc (always the case for
!musl), gcc assumes that it needs to use __stack_chk_guard for the stack
canary.
This causes kernel build errors, because the kernel is only set up to
handle TLS stack canaries.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46543

9 years agoar71xx: fix mr3220 device profile (#19990)
Felix Fietkau [Sat, 1 Aug 2015 15:13:10 +0000 (15:13 +0000)]
ar71xx: fix mr3220 device profile (#19990)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46541

9 years agopackages: uboot-sunxi: bump to 2015.07 - switch to using kernel-supplied dtc - refres...
Zoltan Herpai [Fri, 31 Jul 2015 21:58:31 +0000 (21:58 +0000)]
packages: uboot-sunxi: bump to 2015.07 - switch to using kernel-supplied dtc - refresh olimex-a13-som and lamobo-r1 patches (compile-tested only)

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46540

9 years agokernel: add missing symbol for 4.1
Zoltan Herpai [Fri, 31 Jul 2015 21:49:37 +0000 (21:49 +0000)]
kernel: add missing symbol for 4.1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46539

9 years agobcm53xx: allow device tree to override SPI flash partition layout
Felix Fietkau [Fri, 31 Jul 2015 20:55:30 +0000 (20:55 +0000)]
bcm53xx: allow device tree to override SPI flash partition layout

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46538

9 years agosunxi: fix networking on Olimex A20 Micro
Zoltan Herpai [Fri, 31 Jul 2015 19:50:05 +0000 (19:50 +0000)]
sunxi: fix networking on Olimex A20 Micro

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46536

9 years agomac80211: restore AP scan patch
Felix Fietkau [Fri, 31 Jul 2015 19:49:27 +0000 (19:49 +0000)]
mac80211: restore AP scan patch

Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
SVN-Revision: 46535

9 years agoiw: update to version 4.1
Felix Fietkau [Fri, 31 Jul 2015 19:49:22 +0000 (19:49 +0000)]
iw: update to version 4.1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46534

9 years agomac80211: fix an invalid read in minstrel rate sorting
Felix Fietkau [Fri, 31 Jul 2015 19:49:17 +0000 (19:49 +0000)]
mac80211: fix an invalid read in minstrel rate sorting

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46533

9 years agomac80211: fix data alignment of management frames / beacons
Felix Fietkau [Fri, 31 Jul 2015 19:49:09 +0000 (19:49 +0000)]
mac80211: fix data alignment of management frames / beacons

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46532

9 years agomvebu: update dts files for mamba / WRT1900AC
Imre Kaloz [Fri, 31 Jul 2015 18:23:28 +0000 (18:23 +0000)]
mvebu: update dts files for mamba / WRT1900AC

Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 46530

9 years agokernel: add a few missing symbols for 4.1
Zoltan Herpai [Fri, 31 Jul 2015 18:14:59 +0000 (18:14 +0000)]
kernel: add a few missing symbols for 4.1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46529

9 years agomvebu: fix gpio config on the WRT1200AC
Imre Kaloz [Fri, 31 Jul 2015 18:08:12 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46527

9 years agomxs: switch to 4.1
Zoltan Herpai [Fri, 31 Jul 2015 12:25:35 +0000 (12:25 +0000)]
mxs: switch to 4.1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46526

9 years agomxs: add support for 4.1
Zoltan Herpai [Fri, 31 Jul 2015 12:22:12 +0000 (12:22 +0000)]
mxs: add support for 4.1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46525

9 years agomxs: build sound-soc-mxs only on 3.18 for now
Zoltan Herpai [Fri, 31 Jul 2015 11:58:24 +0000 (11:58 +0000)]
mxs: build sound-soc-mxs only on 3.18 for now

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46524

9 years agopackages: uboot-mxs: bump to 2015.07, refresh Duckbill patch
Zoltan Herpai [Fri, 31 Jul 2015 11:52:48 +0000 (11:52 +0000)]
packages: uboot-mxs: bump to 2015.07, refresh Duckbill patch

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46523

9 years agodnsmasq: Bump to dnsmasq2.74
Steven Barth [Thu, 30 Jul 2015 08:53:43 +0000 (08:53 +0000)]
dnsmasq: Bump to dnsmasq2.74

Bump to dnsmasq2.74 & refresh patches to fix fuzz

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46522

9 years agomwlwifi: upgrade to latest rev with fixed firmware
Imre Kaloz [Thu, 30 Jul 2015 06:41:25 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46520

9 years agomt76: update to the latest version, fixes more tx power related issues
Felix Fietkau [Wed, 29 Jul 2015 16:01:55 +0000 (16:01 +0000)]
mt76: update to the latest version, fixes more tx power related issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46519

9 years agoodhcp6c: minor fixes
Steven Barth [Wed, 29 Jul 2015 06:13:15 +0000 (06:13 +0000)]
odhcp6c: minor fixes

Better synchronize RA & DHCPv6 events
Accumulate some events to avoid flooding
Restart softwires for address and prefix changes

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46518

9 years agoopenssl: add one more mirror
Luka Perkov [Tue, 28 Jul 2015 21:54:44 +0000 (21:54 +0000)]
openssl: add one more mirror

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 46517

9 years agosdk: provide explicit CONFIG_MODULES kconfig symbol
Jo-Philipp Wich [Mon, 27 Jul 2015 23:45:15 +0000 (23:45 +0000)]
sdk: provide explicit CONFIG_MODULES kconfig symbol

Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46514

9 years agomt76: update to the latest version, fixes some compile errors
Felix Fietkau [Mon, 27 Jul 2015 18:46:42 +0000 (18:46 +0000)]
mt76: update to the latest version, fixes some compile errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46513

9 years agofirewall: fix typo in ESP rule
Steven Barth [Mon, 27 Jul 2015 11:47:20 +0000 (11:47 +0000)]
firewall: fix typo in ESP rule

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46506

9 years agooprofile: update to 1.1.0-rc2 and make it work with musl
Hauke Mehrtens [Sun, 26 Jul 2015 15:53:44 +0000 (15:53 +0000)]
oprofile: update to 1.1.0-rc2 and make it work with musl

This brings oprifle to version 1.1.0-rc2 and adds some fixes for musl.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46505

9 years agobcm53xx: update Disable MMU and Dcache during decompression
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:59 +0000 (15:52 +0000)]
bcm53xx: update Disable MMU and Dcache during decompression

This replaces the old patch with the version from Florian.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46504

9 years agokernel: add missing CONFIG_ARM_CCI400_PMU config option
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:34 +0000 (15:52 +0000)]
kernel: add missing CONFIG_ARM_CCI400_PMU config option

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46503

9 years agogpio-button-hotplug: handle EPROBE_DEFER and other errors
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:17 +0000 (15:52 +0000)]
gpio-button-hotplug: handle EPROBE_DEFER and other errors

of_get_gpio_flags() could return an error like EPROBE_DEFER which was
not handled before. This patch takes the code from gpio_keys_polled.c
for error handling and also improves some other unrelated small parts.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46502