Hauke Mehrtens [Sat, 13 Sep 2014 20:26:51 +0000 (20:26 +0000)]
Kconfig: Aesthetic/formatting fixes to toolchain/Config.in.
Non-functional edits to toolchain/Config.in:
* fix spelling mistake ("us" -> "is")
* Overly long help lines shortened to avoid line wrap
* Standardize help info to use tab(s), then two spaces
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
SVN-Revision: 42518
Hauke Mehrtens [Sat, 13 Sep 2014 20:26:08 +0000 (20:26 +0000)]
curl: 7.36.0 -> 7.38.0
Main changes:
- URL parser: IPv6 zone identifiers are now supported
- cyassl: Use error-ssl.h when available (drop local patch)
- polarssl: support CURLOPT_CAPATH / --capath
- mkhelp: generate code for --disable-manual as well (drop local patch)
Full release notes: http://curl.haxx.se/changes.html
MIPS 34kc binary size:
- 7.36.0 before: 82,539 bytes
- 7.38.0 after: 83,321 bytes
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
SVN-Revision: 42517
Steven Barth [Fri, 12 Sep 2014 12:25:55 +0000 (12:25 +0000)]
toolchain: packetize libatomic
Based on a patch by Tobias Steinicke <tobias.steinicke@inet.tu-berlin.de>.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42514
John Crispin [Fri, 12 Sep 2014 06:54:16 +0000 (06:54 +0000)]
atheros: refresh config
Remove symbols that are now placed in the generic config.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42513
John Crispin [Fri, 12 Sep 2014 06:54:10 +0000 (06:54 +0000)]
atheros: convert AR2315 GPIO code to platform driver
Convert gpiolib realization to platform driver and move to the
appropriate subdirectory. Misc GPIO interrupt acknowledgement placed
to the MISC IRQ handler since in fact we can detect only one GPIO state
change.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42512
John Crispin [Fri, 12 Sep 2014 06:54:05 +0000 (06:54 +0000)]
atheros: convert AR5312 GPIO code to platform driver
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42511
John Crispin [Fri, 12 Sep 2014 06:53:58 +0000 (06:53 +0000)]
atheros: rework chained interrupts handling
Call generic_handle_irq() instead of do_IRQ() for chained interrupts,
remove XXX_NONE interrupts and call spurious_interrupt() when an interrupt
is unexpected.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42510
John Crispin [Fri, 12 Sep 2014 06:53:53 +0000 (06:53 +0000)]
atheros: convert gpio.h to stub
Implement to_irq() handler for AR2315 GPIO chip and convert custom
gpio.h header to stub.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42509
John Crispin [Fri, 12 Sep 2014 06:53:48 +0000 (06:53 +0000)]
atheros: rename SoCs config symbols
Rename config symbols to be consistent with other SoCs config symbols
supported by MIPS arch.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42508
John Crispin [Fri, 12 Sep 2014 06:53:43 +0000 (06:53 +0000)]
atheros: add AR2316 and AR2318 SoCs detection
Tested with AR2315, AR2316 and AR2317 SoCs, not tested with AR2318 but
changes seems correct: revision is one more than AR2317.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42507
John Crispin [Fri, 12 Sep 2014 06:53:33 +0000 (06:53 +0000)]
atheros: ar2315-pci: convert to platform driver
Convert the PCI controller support code to platform driver and move it to
appropriate subdirectory.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42506
John Crispin [Fri, 12 Sep 2014 06:53:27 +0000 (06:53 +0000)]
atheros: ar2315-pci: rename configuration symbol
Rename configuration symbol to be consistent with other MIPS machines.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42505
John Crispin [Fri, 12 Sep 2014 06:53:21 +0000 (06:53 +0000)]
atheros: ar2315-pci: update DMA offset macroses
Remove duplicated macroses, which define DMA offset (SDRAM baseaddress).
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42504
John Crispin [Fri, 12 Sep 2014 06:53:15 +0000 (06:53 +0000)]
atheros: ar2315-pci: update host bridge resources
It seems that the PCI controller does not support I/O ports, so remove
the ports range. Also correct the beginning of the memory range and its
size.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42503
John Crispin [Fri, 12 Sep 2014 06:53:09 +0000 (06:53 +0000)]
atheros: ar2315-pci: rework the configuration access code
Use __raw_{read,write}l accessors and use Abort interrupt to detect a
configuration space read/write errors. The second change improves errors
detection, what improves the device presence detection and helps us to
avoid following (and similar) errors:
pci 0000:00:00.2: ignoring class 0x7e0200 (doesn't match header type 02)
pci 0000:00:00.2: bridge configuration invalid ([bus 03-90]), reconfiguring
pci 0000:00:00.2: not setting up bridge for bus 0000:01
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42502
John Crispin [Fri, 12 Sep 2014 06:53:00 +0000 (06:53 +0000)]
atheros: ar2315-pci: rework interrupt handling
Add PCI IRQ controller to facilitate interrupt handling, move interrupts
initialization to the IRQ controller initialization from
pcibios_plat_dev_init() callback.
Also remove odd PCI dev configuration manipulation from pcibios_plat_dev_init()
callback.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42501
John Crispin [Fri, 12 Sep 2014 06:52:55 +0000 (06:52 +0000)]
atheros: ar2315-pci: rework host controller initialization
Explicitly configure PCI host controller, and do not expose it to PCI
subsystem. The PCI host controller acts as a usual PCI device connected
to the bus, but its configuration as a usual PCI device is senseless,
since the host controller provide access to _internal_ memory space for
_external_ device.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42500
John Crispin [Fri, 12 Sep 2014 06:52:51 +0000 (06:52 +0000)]
atheros: ar2315-pci: cosmetic changes
- add comment, which briefly describes PCI controller features and
Fonera 2.0g schematics.
- rename several functions and structures, to make it clear that this
code only for AR2315 chips.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42499
John Crispin [Fri, 12 Sep 2014 06:52:46 +0000 (06:52 +0000)]
atheros: ar2315-pci: remove odd locking in PCI config space access function
Caller (generic PCI code) already do proper locking so no need to add
another one here.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42498
John Crispin [Fri, 12 Sep 2014 06:52:42 +0000 (06:52 +0000)]
atheros: remove odd ATHEROS_AR2315 config symbol dependencies
Remove options which already selected by ATHEROS_AR231X on which
ATHEROS_AR2315 depends.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42497
John Crispin [Fri, 12 Sep 2014 06:52:36 +0000 (06:52 +0000)]
atheros: various space related changes
- remove odd blank lines
- remove odd spaces after casts
- fix alignment
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42496
John Crispin [Fri, 12 Sep 2014 06:52:26 +0000 (06:52 +0000)]
atheros: rework and cleanup board initialization
- remove odd flags and branching
- add __init mark
- make shorter variables names
- returns true or false from boolean functions
- unwrap short function declarations
- unwrap quoted string
- rename macroses with names in CamelCase
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42495
John Crispin [Fri, 12 Sep 2014 06:52:21 +0000 (06:52 +0000)]
atheros: update ether addresses handling
- use ether_foo() routines to work with addresses
- use ETH_ALEN inplace of magic '6'
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42494
John Crispin [Fri, 12 Sep 2014 06:52:14 +0000 (06:52 +0000)]
atheros: remove useless includes
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42493
John Crispin [Fri, 12 Sep 2014 06:52:07 +0000 (06:52 +0000)]
atheros: ar231x-eth: remove useless IOCTL handlers
These IOCTLs handled in the core now.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42492
John Crispin [Fri, 12 Sep 2014 06:52:00 +0000 (06:52 +0000)]
atheros: ar2315-spiflash: use mutex inplace of spinlock
Use mutex inplace of spinlock to make code simple, also call
mutex_{lock,unlock} explicitly to avoid sparse warning about context
imbalance.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42491
John Crispin [Fri, 12 Sep 2014 06:51:51 +0000 (06:51 +0000)]
atheros: ar2315-spiflash: update initialization
- fill module metadata
- remove odd module_{init,exit}
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42490
John Crispin [Fri, 12 Sep 2014 06:51:46 +0000 (06:51 +0000)]
atheros: ar2315-spiflash: use devm_* API to simplify the code
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42489
John Crispin [Fri, 12 Sep 2014 06:51:39 +0000 (06:51 +0000)]
atheros: remove useless return
Remove useless void function return.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42488
John Crispin [Fri, 12 Sep 2014 06:51:33 +0000 (06:51 +0000)]
atheros: remove FSF mailing address
Remove FSF mailing address as suggested by checkpach and place license
URL.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42487
John Crispin [Fri, 12 Sep 2014 06:51:26 +0000 (06:51 +0000)]
atheros: add blank line after declarations
as suggested by checkpach.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42486
John Crispin [Fri, 12 Sep 2014 06:51:10 +0000 (06:51 +0000)]
atheros: use static keywork for local code
Make PCI IRQ handler and several structures static as suggested by
sparse.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42485
John Crispin [Fri, 12 Sep 2014 06:51:05 +0000 (06:51 +0000)]
atheros: use NULL instead of plain integer
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42484
John Crispin [Fri, 12 Sep 2014 06:50:58 +0000 (06:50 +0000)]
atheros: add missing include
Missing this headers cause several sparse "symbol 'foo' was not
declared. Should it be static?" warnings.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42483
John Crispin [Fri, 12 Sep 2014 06:50:53 +0000 (06:50 +0000)]
atheros: avoid extern prototypes
Avoid using of extern prototypes as suggested by checkpatch.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42482
John Crispin [Fri, 12 Sep 2014 06:50:46 +0000 (06:50 +0000)]
ralink: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42481
Felix Fietkau [Thu, 11 Sep 2014 23:13:29 +0000 (23:13 +0000)]
tools: install a fake empty ldconfig script to prevent the system ldconfig from messing around with the toolchain (fixes disappearing musl symlink issue)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42480
Felix Fietkau [Thu, 11 Sep 2014 23:13:24 +0000 (23:13 +0000)]
qos-scripts: disable fq_codel ecn by default to improve compatibility
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42479
John Crispin [Thu, 11 Sep 2014 18:22:31 +0000 (18:22 +0000)]
lantiq: update to a newer versions of the vr9 drivers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42478
John Crispin [Thu, 11 Sep 2014 17:50:03 +0000 (17:50 +0000)]
ltq-deu: fix compile for 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42477
John Crispin [Thu, 11 Sep 2014 17:49:57 +0000 (17:49 +0000)]
lantiq: update 3.14 patches
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42476
John Crispin [Thu, 11 Sep 2014 12:28:22 +0000 (12:28 +0000)]
lldp: remove calls to user/group_add/exists
use the new ipkg based mechanism
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42472
John Crispin [Thu, 11 Sep 2014 12:28:00 +0000 (12:28 +0000)]
procd: update to latest git
add support for starting services as !root
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42471
John Crispin [Thu, 11 Sep 2014 12:27:49 +0000 (12:27 +0000)]
ipkg: add a default postinst/prerm script
the postinst script enables/starts the init.d scripts upon package installation
and installs the users required by the package.
the prerm script stops and disables the init.d scripts.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42470
John Crispin [Thu, 11 Sep 2014 12:27:26 +0000 (12:27 +0000)]
include: add a meta data field for required system user:group
this is in preparation of having services run as !root with
ACL'ed access to ubus.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42469
John Crispin [Thu, 11 Sep 2014 12:27:09 +0000 (12:27 +0000)]
opkg: indicate upgrade vs install
when running the postinst trigger we set PKG_UPGRADE=1 if this is an upgrade
and not an install.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42468
John Crispin [Thu, 11 Sep 2014 12:26:52 +0000 (12:26 +0000)]
umbim: remove superflous jshn call
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42467
John Crispin [Thu, 11 Sep 2014 12:26:41 +0000 (12:26 +0000)]
umbim: update to latest git
adds handling for username/password
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42466
John Crispin [Thu, 11 Sep 2014 12:26:31 +0000 (12:26 +0000)]
comgt: add directip proto
add a proto handler for sierra wireless directip modems
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42465
Luka Perkov [Wed, 10 Sep 2014 23:15:22 +0000 (23:15 +0000)]
config: enable cgroup freezer
This option will be enabled by default only when cgroups support is enabled.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42464
Luka Perkov [Wed, 10 Sep 2014 21:40:19 +0000 (21:40 +0000)]
kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42463
Luka Perkov [Wed, 10 Sep 2014 13:57:48 +0000 (13:57 +0000)]
kernel: remove unused versions
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42462
Felix Fietkau [Wed, 10 Sep 2014 13:50:10 +0000 (13:50 +0000)]
atheros: enable the low_mem flag to better deal with 16M RAM devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42460
Felix Fietkau [Wed, 10 Sep 2014 13:01:53 +0000 (13:01 +0000)]
hostapd: add ubus bindings for wps
With this patch WPS discovery can be started or canceled over ubus if
WPS is enabled in wireless configuration. This is equivalent of
'hostapd_cli wps_pbc' and 'hostapd_cli wps_cancel' commands.
Signed-off-by: Petar Koretic <petar.koretic@sartura.hr>
SVN-Revision: 42459
Felix Fietkau [Wed, 10 Sep 2014 12:56:24 +0000 (12:56 +0000)]
ar71xx: ack completed tx descriptors only after the full frame has been completed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42457
Felix Fietkau [Wed, 10 Sep 2014 12:56:19 +0000 (12:56 +0000)]
procd: allow adding empty strings to arrays
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42456
Luka Perkov [Tue, 9 Sep 2014 21:15:49 +0000 (21:15 +0000)]
imx6: fix image build for Generic profile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42455
Felix Fietkau [Tue, 9 Sep 2014 08:03:00 +0000 (08:03 +0000)]
ath9k: fix pll clock initialization on newer soc devices (fixes #14916)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42453
Hauke Mehrtens [Mon, 8 Sep 2014 19:55:36 +0000 (19:55 +0000)]
kernel: drop 3.9 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42452
Hauke Mehrtens [Mon, 8 Sep 2014 19:55:00 +0000 (19:55 +0000)]
gemini: drop kernel 3.9 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42451
Hauke Mehrtens [Mon, 8 Sep 2014 19:54:22 +0000 (19:54 +0000)]
gemini: switch to kernel 3.10
This switches to kernel 3.10 that was prepared by Hauke in r41531 :
gemini: add support for kernel 3.10
This is compile tested only, please run test and report back.
I've simply checked if it still compiles, unfortunately we didn't get
any feedback for this target.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42450
Hauke Mehrtens [Mon, 8 Sep 2014 19:53:01 +0000 (19:53 +0000)]
omap: add kernel 3.14 support
It has been compile-tested only so far. Please give it a try.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42449
Hauke Mehrtens [Mon, 8 Sep 2014 19:50:53 +0000 (19:50 +0000)]
kernel: add bcma patches sent upstream but not pushed yet
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42448
Hauke Mehrtens [Mon, 8 Sep 2014 19:50:11 +0000 (19:50 +0000)]
kernel: update bcma to the version from wireless-testing master-2014-09-04 tag
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42447
John Crispin [Mon, 8 Sep 2014 17:33:16 +0000 (17:33 +0000)]
ralink: dwc_otg->dwc2
the old dwc_otg driver is starting to fall apart and fails on newer 3g
modems and some storage devices. switch to the upstream dwc2 driver which
is no longer in staging/.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42446
John Crispin [Mon, 8 Sep 2014 17:32:52 +0000 (17:32 +0000)]
ralink: add dwc2 device_reset() call
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42445
Felix Fietkau [Mon, 8 Sep 2014 16:45:30 +0000 (16:45 +0000)]
ath9k: add some ani related stability / performance fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42443
Felix Fietkau [Mon, 8 Sep 2014 16:09:57 +0000 (16:09 +0000)]
tools: fix mtools/dosfstools related build system warnings
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42442
Steven Barth [Mon, 8 Sep 2014 14:45:56 +0000 (14:45 +0000)]
netifd: work-around kernel IPv6 on-link route issue
SVN-Revision: 42439
John Crispin [Mon, 8 Sep 2014 14:29:18 +0000 (14:29 +0000)]
lantiq: add ath9k led pin support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42437
Zoltan Herpai [Mon, 8 Sep 2014 07:50:03 +0000 (07:50 +0000)]
sunxi: re-add lradc driver in 3.14
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42436
Zoltan Herpai [Sun, 7 Sep 2014 23:38:03 +0000 (23:38 +0000)]
tools: build dosfstools and mtools for sunxi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42435
Felix Fietkau [Sun, 7 Sep 2014 09:45:32 +0000 (09:45 +0000)]
ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable. The existing code
however advertieses gigabit capability in the link status word. If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link. This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.
In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.
So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit. This patch implements the
former solution.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
SVN-Revision: 42432
Jonas Gorski [Sun, 7 Sep 2014 09:38:13 +0000 (09:38 +0000)]
mac80211: enable DFS support for ath9k/10k by default
The DFS pattern detector now supports all three regions; ETSI, FCC and
JP, so there is no reason to not have it enabled anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42431
Jonas Gorski [Sun, 7 Sep 2014 09:38:10 +0000 (09:38 +0000)]
toolchain/binutils: do not install host libiberty.a into target lib dir
Binutils target build will pick it up and break build on e.g. arm:
libtool: link: arm-openwrt-linux-uclibcgnueabi-gcc -shared .libs/archive.o .libs/archures.o .libs/bfd.o .libs/bfdio.o .libs/bfdwin.o .libs/cache.o .libs/coffgen.o .libs/corefile.o .libs/format.o .libs/init.o .libs/libbfd.o .libs/opncls.o .libs/reloc.o .libs/section.o .libs/syms.o .libs/targets.o .libs/hash.o .libs/linker.o .libs/srec.o .libs/binary.o .libs/tekhex.o .libs/ihex.o .libs/stabs.o .libs/stab-syms.o .libs/merge.o .libs/dwarf2.o .libs/simple.o .libs/compress.o .libs/verilog.o .libs/elf32-arm.o .libs/elf32.o .libs/elf-nacl.o .libs/elf-vxworks.o .libs/elf.o .libs/elflink.o .libs/elf-attrs.o .libs/elf-strtab.o .libs/elf-eh-frame.o .libs/dwarf1.o .libs/elf32-gen.o .libs/cpu-arm.o -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/build_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/binutils-2.24/bfd/../libiberty/pic -liberty -lz -march=armv5te -mtune=arm926ej-s -mfloat-abi=soft -Wl,-lc -Wl,--as-needed -Wl,-lm -Wl,--no-as-needed -Wl,-soname -Wl,libbfd-2.24.so -o .libs/libbfd-2.24.so
/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib/libiberty.a: could not read symbols: File format not recognized
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42430
Felix Fietkau [Sat, 6 Sep 2014 17:51:48 +0000 (17:51 +0000)]
ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes (#13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42429
Felix Fietkau [Sat, 6 Sep 2014 17:51:44 +0000 (17:51 +0000)]
ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42428
Felix Fietkau [Sat, 6 Sep 2014 17:51:39 +0000 (17:51 +0000)]
ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 (improves performance) (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42427
Felix Fietkau [Sat, 6 Sep 2014 17:51:35 +0000 (17:51 +0000)]
atheros: remove linux 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42426
Zoltan Herpai [Sat, 6 Sep 2014 15:59:06 +0000 (15:59 +0000)]
sunxi: bump kernel to 3.14.16
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42425
Zoltan Herpai [Sat, 6 Sep 2014 15:57:08 +0000 (15:57 +0000)]
sunxi: update pcDuino3 profile to the new u-boot
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42424
Zoltan Herpai [Sat, 6 Sep 2014 15:23:30 +0000 (15:23 +0000)]
sunxi: update Bananapi profile to the new u-boot
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42423
Zoltan Herpai [Sat, 6 Sep 2014 15:18:40 +0000 (15:18 +0000)]
uboot-sunxi: bump to 2014.04
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42422
Nicolas Thill [Fri, 5 Sep 2014 22:02:09 +0000 (22:02 +0000)]
uml: bump to 3.14.16
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 42421
Felix Fietkau [Thu, 4 Sep 2014 11:25:04 +0000 (11:25 +0000)]
uclient: update to the latest version, fixes some crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42419
Florian Fainelli [Wed, 3 Sep 2014 03:11:25 +0000 (03:11 +0000)]
at91: build images for AT91SAMA5D3XPLAINED
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42418
Florian Fainelli [Wed, 3 Sep 2014 03:11:11 +0000 (03:11 +0000)]
at91: add SAMA5D3 subtarget
Add a subtarget for Atmel's SAMA5D3 Cortex-A5 based SoCs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42417
Florian Fainelli [Wed, 3 Sep 2014 03:10:59 +0000 (03:10 +0000)]
at91: move legacy Kconfig options to subtarget
Some Kconfig options are only relevant for the legacy platforms, move
them where they belong
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42416
Florian Fainelli [Wed, 3 Sep 2014 03:10:47 +0000 (03:10 +0000)]
at91: switch to 3.14
We need a new kernel version to support Cortex-A5 based platforms such
as SAMA5GD3.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42415
Florian Fainelli [Wed, 3 Sep 2014 03:10:18 +0000 (03:10 +0000)]
at91: add 3.14 support
Add support for Linux 3.14 for the Atmel's AT91 platform.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42414
Florian Fainelli [Wed, 3 Sep 2014 03:09:51 +0000 (03:09 +0000)]
at91: move 3.10 specific files and patches
In preparation for adding 3.14 kernel support, move files and patches to
a separate per-version directory since some of them will have
incompatible changes (e.g: dts)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42413
Florian Fainelli [Wed, 3 Sep 2014 03:09:36 +0000 (03:09 +0000)]
at91: add Kconfig symbol for CONFIG_USB_ATMEL_USBA
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42412
Florian Fainelli [Wed, 3 Sep 2014 03:09:24 +0000 (03:09 +0000)]
at91: add CONFIG_USB_OHCI_HCD_AT91 to usb-ohci
The at91 OHCI driver has a separate Kconfig symbol with newer kernels,
include it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42411
Florian Fainelli [Wed, 3 Sep 2014 03:09:14 +0000 (03:09 +0000)]
at91: fix typo on Calao
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42410
Florian Fainelli [Wed, 3 Sep 2014 03:09:03 +0000 (03:09 +0000)]
include: add Cortex-A5 CPU_TYPE
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42409
Florian Fainelli [Wed, 3 Sep 2014 03:08:51 +0000 (03:08 +0000)]
at91: create a legacy subtarget
In preparation for adding SAMA5D3 support, move the legacy ARMv5 based
platforms to a separate subtarget.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42408
John Crispin [Tue, 2 Sep 2014 21:39:40 +0000 (21:39 +0000)]
mdns: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42407
Felix Fietkau [Tue, 2 Sep 2014 21:06:35 +0000 (21:06 +0000)]
mtd: disable trx_check() for ar71xx, fixes a regression introduced in r42403
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42405
Felix Fietkau [Tue, 2 Sep 2014 17:13:42 +0000 (17:13 +0000)]
mtd: Fix trx check after partition rename ("linux" to "firmware")
On brcm47xx (Huawei E970), I noticed that sysupgrade now tries to flash trx images which don't fit into the flash, resulting in non-booting system.
I found that mtd does trx size checking only when flashing to a partition called "linux". This patch changes this to be "firmware".
This matches the following patch which changed partition name in bcm47xxpart.c driver to "firmware":
commit
86b4d5ef68ca77ff6724ebb9bddd6b93239c87fc
Author: hauke <hauke@
3c298f89-4303-0410-b956-
a3cf2f4a3e73>
Date: Sun Dec 1 16:32:32 2013 +0000
brcm47xx: use "firmware" partition name
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 38973
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
SVN-Revision: 42403
Felix Fietkau [Tue, 2 Sep 2014 17:00:46 +0000 (17:00 +0000)]
omap: remove 3.12 kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42401
projects / oweals / openwrt.git / log