Add support for minimum and maximum protocol version supported by a cipher

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Add ssl_get_client_min_max_version() function

Adjust ssl_set_client_hello_version to get both the minimum and maximum and then
make ssl_set_client_hello_version use the maximum version.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Make SSL_CIPHER_get_version return a const char *

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Remove unused code

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Make function to convert version to string

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Constify security callbacks

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Documentation for ctx_set_ctlog_list_file()

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Minor improvement to formatting of SCT output in s_client

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Do not display a CT log error message if CT validation is disabled

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

RT3676: Expose ECgroup i2d functions

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Comment away the extra checks in Configure

The "extra checks" is a debugging tool to check the config resolving
mechanism.  It uses Perl's smart match, which is experimental and
therefore always causes Perl to give out a warning, and it causes
older Perl versions to fail entirely.

So, it gets commented away, but stays otherwise in place, as it may be
useful again.

Reviewed-by: Matt Caswell <matt@openssl.org>

Make ct_dir and certs_dir static in test/ct_test.c

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix ct_test to not assume it's in the source directory

ct_test assumed it's run in the source directory and failed when built
elsewhere.  It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.

Test recipe updated to match.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Document importance of CTLOG_STORE outliving SCT if SCT_set0_log is used

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Make SCT literals into const variables in ct_test.c

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Makes STACK_OF(SCT)* parameter of i2d_SCT_LIST const

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Removes SCT_LIST_set_source and SCT_LIST_set0_logs

Both of these functions can easily be implemented by callers instead.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Makes SCT_get0_log return const CTLOG*

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Makes CTLOG_STORE_get0_log_by_id return const CTLOG*

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Improved documentation of SCT_CTX_* functions

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Updates ct_err.c

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove unnecessary call to SCT_set1_extensions(sct, "", 0) in ct_test.c

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reset SCT validation_status if the SCT is modified

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Use SCT_VERSION_V1 in place of literal 0 in ct_test.c

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fixes "usuable" typo in ct_locl.h

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Treat boolean functions as booleans

Use "!x" instead of "x <= 0", as these functions never return a negative
value.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Make parameters of CTLOG_get* const

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Extensive application of __owur to CT functions that return a boolean

Also improves some documentation of those functions.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Makes SCT_LIST_set_source return the number of successes

No longer terminates on first error, but instead tries to set the source
of every SCT regardless of whether an error occurs with some.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix locking in ssl_cert_dup()

Properly check the return value of CRYPTO_THREAD_lock_new()

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Restore building out of source with the unified build scheme

Reviewed-by: Matt Caswell <matt@openssl.org>

CT test can't run without EC, so skip it on that algo as well

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix ct_test to not assume it's in the source directory

ct_test assumed it's run in the source directory and failed when built
elsewhere.  It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.

Test recipe updated to match.

Reviewed-by: Matt Caswell <matt@openssl.org>

Update CHANGES and NEWS

Update the CHANGES and NEWS files with information about the recently added
AFALG engine and pipelining.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix classic build

The Thread API changes broke classic build. This fixes it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

In build.info, an IF within a clause that's skipped over shouldn't apply

If we find an IF within a clause that's skipped over, set it to be
skipped as well.

Reviewed-by: Matt Caswell <matt@openssl.org>

Add an entry in NEWS about the new threading API

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update CHANGES for the new threading API

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove the old threading API

All OpenSSL code has now been transferred to use the new threading API,
so the old one is no longer used and can be removed. We provide some compat
macros for removed functions which are all no-ops.

There is now no longer a need to set locking callbacks!!

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove use of the old CRYPTO_LOCK_X5O9_STORE

The locking here is a bit strange and unclear. Rather than refactor
anything and possibly break stuff I have just moved to using the new
thread API following as closely as possible what was there previously.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't call ENGINE_cleanup when configured "no-engine"

Reviewed-by: Matt Caswell <matt@openssl.org>

Don't add engines if configured "no-engine"

Similarly, don't add e_capi if configured "no-capieng"

Also, indent a little deeper, for clarity.

Reviewed-by: Matt Caswell <matt@openssl.org>

Don't add afalg engine if configured "no-engine"

Also, indent a little deeper, for clarity.

Reviewed-by: Matt Caswell <matt@openssl.org>

Don't check the conditions to build e_afalg if configured "no-engine"

Reviewed-by: Matt Caswell <matt@openssl.org>

Have Configure display the value of SHARED_CFLAG

Reviewed-by: Andy Polyakov <appro@openssl.org>

Make sure the effect of "pic" / "no-pic" is used with assembler compilations

Before the 'Introduce the "pic" / "no-pic" config option' commit, the
shared_cflag value for the chosen config would be part of the make
variable CFLAG, which got replicated into CFLAGS and ASFLAGS.

Since said commit, the shared_cflag value has become a make variable
of its own, SHARED_CFLAG (which is left empty in a "no-pic" build).

However, ASFLAGS was forgotten.  That's what's corrected with this
change.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Touch the correct variables for the system; shlib_wrap.sh on Solaris

If there is cause to think LD_LIBRARY_PATH_32 and LD_PRELOAD_32 are
appropriate variables to touch, do so.  Otherwise, touch the usual
LD_LIBRARY_PATH and LD_PRELOAD.  This covers for older installations
that don't have a mix of 32-bit and 64-bit libs.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Recognise 32-bit Solaris in util/shlib_wrap.sh

Submitted by Erik Forsberg <erik@efca.com>

Reviewed-by: Andy Polyakov <appro@openssl.org>

Check gcc version to see if it supports -MM and friends

According to manuals found here: https://gcc.gnu.org/onlinedocs/, GNU
C version 3 and on support the dependency generation options.  We
therefore need to check the gcc version to see if we're going to use
it or makedepend for dependency generation.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Add extra include directory for includers of ppc_arch.h

crypto/evp/e_aes.c and crypto/modes/gcm128.c include ppc_arch.h, which
is located in crypto/, so add that as extra include directory for them.

Issue reported by Jeffrey Walton <noloader@gmail.com>

Reviewed-by: Andy Polyakov <appro@openssl.org>

Adapt INSTALL and related notes for Windows

Reviewed-by: Rich Salz <rsalz@openssl.org>

Adapt appveyor.yml for the new unified build

Reviewed-by: Rich Salz <rsalz@openssl.org>

Adapt the Windows makefile template to source generation

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't run the TLSProxy based tests in native Windows

There are issues binding listening ports.  This may be analyzed more
thoroughly later on.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Unified - name native Windows shared libraries like MingW builds do

Reviewed-by: Rich Salz <rsalz@openssl.org>

Unified - extract settings from util/pl/VC-32.pl and make the config settings

This introduces the settings loutflag and aroutflag, because different
Windows tools that do the same thing have different ways to specify
the output file.

The Borland C++ config is commented away for the monent, perhaps
permanently.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Unified - a native Windows makefile template

Reviewed-by: Rich Salz <rsalz@openssl.org>

ec/asm/ecp_nistz256-sparcv9.pl: get corner logic right.

RT#4284

Reviewed-by: Rich Salz <rsalz@openssl.org>

Adapt mk1mf.pl and companions to changed perlasm script semantics

Reviewed-by: Matt Caswell <matt@openssl.org>

Unified - adapt the generation of whirlpool assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/whrlpool/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of sha assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/sha/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of rc4 assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/rc4/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of rc5 assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/rc5/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of ripemd assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/ripemd/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of md5 assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/md5/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of modes assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/modes/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of poly1305 assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/poly1305/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of des assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/des/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of ec assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/ec/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of camellia assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/camellia/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of cast assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/cast/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of chacha assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/chacha/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Because crypto/build.info demands CFLAGS_Q, descrip.mms.tmpl must deliver

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of cpuid, uplink and buildinf to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of aes assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/aes/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Unified - adapt the generation of blowfish assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/bf/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Convert the dynlocks in e_chil to the new Thread API locks

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove another lock from e_chil

Reviewed-by: Richard Levitte <levitte@openssl.org>

Always call ENGINE_cleanup() in de-init

Even if we haven't loaded an engine, we might have set up the
global_engine_lock, so we should still clean up.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Move chil engine to the new thread api

Move the chil engine to use the new thread API. As I don't have access to
the hardware I can't test this :-(. I think its ok...

Reviewed-by: Richard Levitte <levitte@openssl.org>

Move engine library over to using the new thread API

Remove usage of CRYPTO_LOCK_ENGINE

Reviewed-by: Richard Levitte <levitte@openssl.org>

err_lcl.h is gone, don't pretend it's there

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Add missing semi

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Counter mixed signedness with a cast

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Fix names of the #define used for platform specific code

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Add empty line after local variables

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix error with wait set of fds for the select()

It also makes the call to select blocking to reduce CPU usage

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Use correct function ID in error path

This fixes "make update".

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Move variable declaration to the start of the function

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Ensure CRYPTO_mem_leaks is the last thing we do

CRYPTO_mem_leaks de-inits the library, so we must not do anything
interesting after we've used it!

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix memory leak in ssltest

The new Rand usage of Thread API exposed a bug in ssltest. ssltest "cheats"
and uses internal headers to directly call functions that normally you
wouldn't be able to do. This means that auto-init doesn't happen, and
therefore auto-deinit doesn't happen either, meaning that the new rand locks
don't get cleaned up properly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert rand code to new threading API

Replace the CRYPTO_LOCK_RAND and CRYPTO_LOCK_RAND2 locks with new thread
API style locks.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Adapt unix Makefile template to 'no-makedepend'

This change is a bit more complex, as it involves several recipe
variants.

Also, remove the $(CROSS_COMPILE) prefix for the makedepend program.
When we use the program "makedepend", this doesn't serve anything,
and when we use the compiler, this value isn't even used.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Adapt descrip.mms.tmpl to 'no-makedepend'

VMS doesn't have "makedepend" anyway, so this is just a matter of using
the right qualifiers when 'makedepend' is enabled.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add the configure option 'no-makedepend'

If no makedepend program or equaly capable compiler is present,
'makedepend' gets disabled automatically.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix SSL_CIPHER_get_auth_nid return

Copy/paste error between SSL_CIPHER_get_kx_nid() and
SSL_CIPHER_get_auth_nid(), wrong table was referenced

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix a typo in dynamic_load()

Reviewed-by: Matt Caswell <matt@openssl.org>

Convert RSA blinding to new multi-threading API

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert CRYPTO_LOCK_SSL_* to new multi-threading API

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove the transfer of lock hooks from bind_engine

With the new threads API, this is no longer needed.

Reviewed-by: Matt Caswell <matt@openssl.org>