oweals/openssl.git
8 years agoRemove outdated legacy crypto options
Rich Salz [Wed, 27 Jan 2016 23:43:25 +0000 (18:43 -0500)]
Remove outdated legacy crypto options

Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed.  This simplifies the source code and
does not really penalize anyone.
        DES_PTR (always on)
        DES_RISC1, DES_RISC2 (always off)
        DES_INT (always 'unsigned int')
        DES_UNROLL (always on)
        BF_PTR (always on) BF_PTR2 (removed)
        MD2_CHAR, MD2_LONG (always 'unsigned char')
        IDEA_SHORT, IDEA_LONG (always 'unsigned int')
        RC2_SHORT, RC2_LONG (always 'unsigned int')
        RC4_LONG (only int and char (for assembler) are supported)
        RC4_CHUNK (always long), RC_CHUNK_LL (removed)
        RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)

This is done in consultation with Andy.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoFix check of what makedepprog should be
Richard Levitte [Wed, 27 Jan 2016 18:03:13 +0000 (19:03 +0100)]
Fix check of what makedepprog should be

A mistake was made and the setting of this config variable got
reverted to an older behavior.  This restores the latest.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
8 years agoTest all built-in curves and let the library choose the EC_METHOD
Billy Brumley [Wed, 27 Jan 2016 15:29:32 +0000 (17:29 +0200)]
Test all built-in curves and let the library choose the EC_METHOD

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoComplete the removal of /* foo.c */ comments
Richard Levitte [Wed, 27 Jan 2016 17:37:12 +0000 (18:37 +0100)]
Complete the removal of /* foo.c */ comments

Some files that are automatically generated still had those comments
added by the generating scripts.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoSkip all explicitely if the number of tests is 0
Richard Levitte [Wed, 27 Jan 2016 17:31:08 +0000 (18:31 +0100)]
Skip all explicitely if the number of tests is 0

It seems that Test::More doesn't like 0 tests, a line like this raises
an error and stops the recipe entirely:

    plan tests => 0;

So we need to check for 0 tests beforehand and skip the subtest
explicitely in that case.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFix typos
Zhao Junwang [Tue, 26 Jan 2016 21:57:27 +0000 (05:57 +0800)]
Fix typos

cryptograpic => cryptographic

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoBe careful when applying EXE_SHELL
Richard Levitte [Tue, 26 Jan 2016 16:50:13 +0000 (17:50 +0100)]
Be careful when applying EXE_SHELL

$EXE_SHELL should only be used with out own programs, not with
surrounding programs such as the perl interpreter.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoDoc fixes suggested by Claus Assmann
Viktor Dukhovni [Wed, 27 Jan 2016 05:55:19 +0000 (00:55 -0500)]
Doc fixes suggested by Claus Assmann

RT4264, RT4268

Reviewed-by: Tim Hudson <tjh@openssl.org>
8 years agoFix Custom Extension tests skip count
Viktor Dukhovni [Tue, 26 Jan 2016 21:52:26 +0000 (16:52 -0500)]
Fix Custom Extension tests skip count

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRemove /* foo.c */ comments
Rich Salz [Fri, 18 Dec 2015 17:57:23 +0000 (12:57 -0500)]
Remove /* foo.c */ comments

This was done by the following
        find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
        print unless $. == 1 && m@/\* .*\.[ch] \*/@;
        close ARGV if eof; # Close file to reset $.

And then some hand-editing of other files.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoSHARED_LIBS_LINK_EXTS is no longer used, remove it completely
Richard Levitte [Tue, 26 Jan 2016 16:04:26 +0000 (17:04 +0100)]
SHARED_LIBS_LINK_EXTS is no longer used, remove it completely

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRemove unused, undocumented clean-shared target
Benjamin Kaduk [Thu, 21 Jan 2016 18:06:39 +0000 (12:06 -0600)]
Remove unused, undocumented clean-shared target

Also removes the make variable SHARED_LIBS_LINK_EXTS, only used by
the clean-shared target.

When shared library linking was moved to the separate Makefile.shared
in commit 30afcc072acd4f70590fec68bf0590da4e4f1883, this target was
skipped.  Prior to that commit, clean-shared was invoked as a
dependency of build-shared, but afterward it was no longer referenced
anywhere in the tree.

Instead of porting the functionality over to Makefile.shared, just
remove it entirely, as it appears to be unused.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRT4272: Unit tests fail when DTLS disabled
Todd Short [Mon, 25 Jan 2016 17:44:15 +0000 (12:44 -0500)]
RT4272: Unit tests fail when DTLS disabled

Missing SKIP: block in SSL unit tests for DTLS and TLS version tests.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years ago80-test_ca.t is made to use the new perlapp()
Richard Levitte [Tue, 26 Jan 2016 14:01:00 +0000 (15:01 +0100)]
80-test_ca.t is made to use the new perlapp()

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoHave OpenSSL::Test handle perl scripts like any program
Richard Levitte [Tue, 26 Jan 2016 13:57:21 +0000 (14:57 +0100)]
Have OpenSSL::Test handle perl scripts like any program

Since we're building some of our perl scripts and the result might not
end up in apps/ (*), we may need to treat them like the compile
programs we use for testing.

This introduces perlapp() and perltest(), which behave like app() and
test(), but will add the perl executable in the command line.

-----

(*) For example, with a mk1mf build, the result will end up in $(BIN_D)

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoAdd SSL_up_ref() and SSL_CTX_up_ref()
Matt Caswell [Tue, 26 Jan 2016 11:31:41 +0000 (11:31 +0000)]
Add SSL_up_ref() and SSL_CTX_up_ref()

The SSL and SSL_CTX structures are reference counted. However since libssl
was made opaque there is no way for users of the library to manipulate the
reference counts. This adds functions to enable that.

Reviewed-by: Stephen Henson <steve@openssl.org>
8 years agoRemove dirs from mkfiles.pl
Matt Caswell [Tue, 26 Jan 2016 10:29:48 +0000 (10:29 +0000)]
Remove dirs from mkfiles.pl

Recent changes have removed some directories which is causing mkfiles.pl
to fail.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoUse the new OpenSSL::Test::Utils routines.
Richard Levitte [Tue, 26 Jan 2016 01:11:55 +0000 (02:11 +0100)]
Use the new OpenSSL::Test::Utils routines.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoUse Configure's @disablables and %disabled through configdata.pm
Richard Levitte [Tue, 26 Jan 2016 01:09:33 +0000 (02:09 +0100)]
Use Configure's @disablables and %disabled through configdata.pm

Enhances the routines in OpenSSL::Test::Utils for checking disabled
stuff to get their information directly from Configure instead of
'openssl list -disabled'.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoConfigure first in travis create release
Richard Levitte [Tue, 26 Jan 2016 00:47:00 +0000 (01:47 +0100)]
Configure first in travis create release

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoBase the tarfile list of files on git ls-files instead of find
Richard Levitte [Tue, 26 Jan 2016 00:40:13 +0000 (01:40 +0100)]
Base the tarfile list of files on git ls-files instead of find

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoAsk for tests in CONTRIBUTING
Rich Salz [Mon, 25 Jan 2016 22:12:57 +0000 (17:12 -0500)]
Ask for tests in CONTRIBUTING

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoSmall Makefile.in cleanup
Richard Levitte [Mon, 25 Jan 2016 21:23:42 +0000 (22:23 +0100)]
Small Makefile.in cleanup

engines_obj changed name to padlock_obj in Configure.  We need to do
the corresponding ENGINES_ASM_OBJ -> PADLOCK_ASM_OBJ in appropriate
Makefile.ins.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoSmall cleanups in Configure
Richard Levitte [Mon, 25 Jan 2016 20:51:22 +0000 (21:51 +0100)]
Small cleanups in Configure

- Small rearrangement of the TABLE and HASH printouts, and adding
  printout of the "build_scheme" item
- Renamed "engines_obj" to "padlock_obj"
- Moved the runs of dofile down...  it didn't quite make sense to have
  that in the middle of a printout

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoGenerate warning text
Richard Levitte [Mon, 25 Jan 2016 20:19:59 +0000 (21:19 +0100)]
Generate warning text

Now that we're using templates, we should warn people not to edit the
resulting file.  We do it through util/dofile.pl, which is enhanced
with an option to tell what file it was called from.  We also change
the calls so the template files are on the command line instead of
being redirected through standard input.  That way, we can display
something like this (example taken from include/openssl/opensslconf.h):

    /* WARNING: do not edit! */
    /* Generated by Configure from include/openssl/opensslconf.h.in */

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoMisc fixups
Richard Levitte [Mon, 25 Jan 2016 19:07:34 +0000 (20:07 +0100)]
Misc fixups

The goal is Makefile, not Makefile.new
Remove the second generation of opensslconf.h

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRevert merge error
Richard Levitte [Mon, 25 Jan 2016 17:20:23 +0000 (18:20 +0100)]
Revert merge error

There are two versions of print_table_entry() in Configure.  Remove
the older.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoAdd some info in CHANGES about what's happening so far with Configure et al
Richard Levitte [Sat, 23 Jan 2016 22:09:12 +0000 (23:09 +0100)]
Add some info in CHANGES about what's happening so far with Configure et al

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoRemove GOST again
Richard Levitte [Sat, 23 Jan 2016 21:58:51 +0000 (22:58 +0100)]
Remove GOST again

The config for the removed GOST engine reappeared by mistake.  Now
removed again.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoRefactor file writing - Remake Makefile.org into a template
Richard Levitte [Wed, 20 May 2015 18:03:20 +0000 (20:03 +0200)]
Refactor file writing - Remake Makefile.org into a template

It is time for Makefile.org to fold into the new regime and have a run
through util/dofile.pl.  This forces some information out of there and
into Configure, which isn't a bad thing, it makes Configure
increasingly the center of build information, which is as it should
be.

A few extra defaults were needed in the BASE template to get rid of
warnings about missing values.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoNow that Configure doesn't produce tools/c_rehash, mk1mf has to do it
Richard Levitte [Sun, 24 Jan 2016 16:07:27 +0000 (17:07 +0100)]
Now that Configure doesn't produce tools/c_rehash, mk1mf has to do it

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFor every test in 80-test_ssl.t, check that the protocol(s) used is enabled
Richard Levitte [Mon, 25 Jan 2016 13:34:22 +0000 (14:34 +0100)]
For every test in 80-test_ssl.t, check that the protocol(s) used is enabled

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoMake tests use configdata.pm rather than parsing Makefile
Richard Levitte [Mon, 25 Jan 2016 14:48:35 +0000 (15:48 +0100)]
Make tests use configdata.pm rather than parsing Makefile

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoMove & split opensslconf.h.in
Rich Salz [Mon, 25 Jan 2016 14:44:08 +0000 (09:44 -0500)]
Move & split opensslconf.h.in

Move opensslconf.h.in to include/openssl.
Split off DES,BN,RC4 stuff into separate header file
templates in crypto/include/internal/*_conf.h.in

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix OpenSSL::Test::Simple to take more than one algorithm
Richard Levitte [Sun, 24 Jan 2016 15:23:55 +0000 (16:23 +0100)]
Fix OpenSSL::Test::Simple to take more than one algorithm

Some test programs may depend on more than just one TLS version, for
example.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoMove pqueue into ssl
Rich Salz [Fri, 22 Jan 2016 19:54:01 +0000 (14:54 -0500)]
Move pqueue into ssl

This is an internal facility, never documented, not for
public consumption.  Move it into ssl (where it's only used
for DTLS).

I also made the typedef's for pqueue and pitem follow our style: they
name structures, not pointers.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoMake sure apps/Makefile builds apps/CA.pl by default
Richard Levitte [Sun, 24 Jan 2016 23:16:04 +0000 (00:16 +0100)]
Make sure apps/Makefile builds apps/CA.pl by default

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoThe rehash.time target should depend on build_tools as well
Richard Levitte [Sat, 23 Jan 2016 22:19:05 +0000 (23:19 +0100)]
The rehash.time target should depend on build_tools as well

The explanation is that it falls back to using tools/c_rehash if
'apps/openssl rehash' isn't supported on the platform at hand.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFix two possible leaks.
FdaSilvaYY [Thu, 21 Jan 2016 22:10:29 +0000 (23:10 +0100)]
Fix two possible leaks.

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #580

8 years agoFix possible memory leak on BUF_MEM_grow_clean failure
FdaSilvaYY [Thu, 21 Jan 2016 22:09:57 +0000 (23:09 +0100)]
Fix possible memory leak on BUF_MEM_grow_clean failure

Simplify BUF_MEM init. code

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #580

8 years agoRefactor file writing - make configdata.pm the info center for "reconf"
Richard Levitte [Sun, 27 Dec 2015 01:27:30 +0000 (02:27 +0100)]
Refactor file writing - make configdata.pm the info center for "reconf"

Now that configdata.pm is the centre of information, use that instead
of Makefile to figure out reconfiguration parameters.  This will help
future development with different Makefile file names.

The code to read necessary configuration data from Makefile is retained
for an easy transition to configdata.pm based information gathering.  It
will be removed later on.

This change includes moving the variable $cross_compile_prefix to %config.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoString configs are truly deprecated, not even somewhat supported any more
Richard Levitte [Sat, 23 Jan 2016 10:43:35 +0000 (11:43 +0100)]
String configs are truly deprecated, not even somewhat supported any more

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRemove extra unused variable in util/dofile.pl
Richard Levitte [Sat, 23 Jan 2016 11:35:30 +0000 (12:35 +0100)]
Remove extra unused variable in util/dofile.pl

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFix store with opaque data
Todd Short [Thu, 21 Jan 2016 19:26:53 +0000 (14:26 -0500)]
Fix store with opaque data

When experimental-store is enabled, it does not compile due to the
change to opaque data structures.

Change CRYPTO_add() to EVP_PKEY_up_ref() as needed.

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
RT: #4263, GH: #579

8 years agofree item after sk_push fail
mrpre [Tue, 1 Sep 2015 12:42:06 +0000 (20:42 +0800)]
free item after sk_push fail

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
8 years agoDisable jpake if psk is disabled.
Ben Laurie [Thu, 31 Dec 2015 16:45:00 +0000 (16:45 +0000)]
Disable jpake if psk is disabled.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoRefactor file writing - rewrite crypto/opensslconf.h.in as template
Richard Levitte [Mon, 18 May 2015 23:40:54 +0000 (01:40 +0200)]
Refactor file writing - rewrite crypto/opensslconf.h.in as template

The turn has come to have crypto/opensslconf.h.in get run through
util/dofile.pl.  The consequence is that a large number of variables
get moved to the %config table.

Also, the string variables $openssl_*, which were populated with cpp
lines, all being of the form "#define SOMETHING", were converted into
ARRAY refs in %config values, containing just the list of macros to be
defined.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefactor file writing - Adapt util/mkdef.pl to use configdata.pm
Richard Levitte [Mon, 11 Jan 2016 23:17:12 +0000 (00:17 +0100)]
Refactor file writing - Adapt util/mkdef.pl to use configdata.pm

For this adaptation, the variables $options and $version needed to
move to %config in Configure, and why not move all other variables
holding diverse version numbers at the same time?

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRefactor file writing - information on our use of Perl and Perl modules
Richard Levitte [Thu, 21 Jan 2016 13:43:51 +0000 (14:43 +0100)]
Refactor file writing - information on our use of Perl and Perl modules

This includes a start on how to install missing modules.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefactor file writing - adapt util/dofile.pl to use with_fallback
Richard Levitte [Fri, 22 Jan 2016 11:40:49 +0000 (12:40 +0100)]
Refactor file writing - adapt util/dofile.pl to use with_fallback

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoBundle the non core Perl module Text::Template
Richard Levitte [Fri, 22 Jan 2016 11:25:14 +0000 (12:25 +0100)]
Bundle the non core Perl module Text::Template

Because we're using Text::Template and we know it's a non core Perl
module, we choose to bundle it into our source, for convenience.

external/perl/Downloaded.txt document what modules we choose to bundle
this way and exactly where we downloaded it from.

With this changes comes the transfer module for with_fallback.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefactor file writing - arrange for use of bundled Perl modules as fallback
Richard Levitte [Fri, 22 Jan 2016 11:37:31 +0000 (12:37 +0100)]
Refactor file writing - arrange for use of bundled Perl modules as fallback

For our own convenience, we need a mechanism to be able to fall back
on bundled Perl modules.  It's a minimal package that's called like
this:

    use with_fallback qw(Module1 Module2 ...);

For each module, it will try to require them from the system
installation, and failing that, it will temporarly add external/perl
and try to require transfer::{ModuleName}.  It requires that each
bundled Perl modules is accompanied by a small transfer module
(external/perl/transfer/ModuleName.pm in our example) that knows
exactly what to load.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefactor file writing - introduce template driven file writing
Richard Levitte [Mon, 18 May 2015 20:35:23 +0000 (22:35 +0200)]
Refactor file writing - introduce template driven file writing

apps/CA.pl and tools/c_rehash are built from template files.  So far,
this was done by Configure, which created its own problems as it
forced everyone to reconfigure just because one of the template files
had changed.
Instead, have those files created as part of the normal build in apps/
and in tools/.

Furthermore, this prepares for a future where Configure may produce
entirely other build files than Makefile, and the latter can't be
guaranteed to be the holder of all information for other scripts.
Instead, configdata.pm (described below) becomes the center of
configuration information.

This introduces a few new things:

%config         a hash table to hold all kinds of configuration data
                that can be used by any other script.
configdata.pm   a perl module that Configure writes.  It currently
                holds the hash tables %config and %target.
util/dofile.pl  a script that takes a template on STDIN and outputs
                the result after applying configuration data on it.
                It's supposed to be called like this:

                        perl -I$(TOP) -Mconfigdata < template > result

                or

                        perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result

                Note: util/dofile.pl requires Text::Template.

As part of this changed, remove a number of variables that are really
just copies of entries in %target, and use %target directly.  The
exceptions are $target{cflags} and $target{lflags}, they do get copied
to $cflags and $lflags.  The reason for this is that those variable
potentially go through a lot of changes and would rather deserve a
place in %config.  That, however, is for another commit.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRefactor config - consolidate and refresh print_table_entry
Richard Levitte [Mon, 18 May 2015 10:53:38 +0000 (12:53 +0200)]
Refactor config - consolidate and refresh print_table_entry

It's time for print_table_entry to get a bit of refreshment.  The way it
was put together, we needed to maintain the list of known configuration
keys of interest twice, in different shapes.  This is error prone, so
move the list of strings to a common list for all printing cases, and
use simple formatting of lines to do the actual printout based on that
list.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFix quoting error in SRP printf
Andy Isaacson [Fri, 22 Jan 2016 20:06:21 +0000 (15:06 -0500)]
Fix quoting error in SRP printf

The code is trying to interpolate the value of the BASE_SECTION macro,
but due to excess escaping, it instead prints the string "BASE_SECTION".

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
8 years agoFixed typo in the SSL_CTX_set_security_level
Alex Gaynor [Tue, 19 Aug 2014 01:56:04 +0000 (18:56 -0700)]
Fixed typo in the SSL_CTX_set_security_level

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
8 years agoCleanup .gitignore
Richard Levitte [Fri, 22 Jan 2016 12:06:26 +0000 (13:06 +0100)]
Cleanup .gitignore

Some things to ignore need to be properly rooted, and use a bit more
precision on ignoring 'lib', as that maybe be a perfectly valid
directory name to add into git elsewhere in the source tree.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoConfigurations - no_asm_filler is long gone, don't use it
Richard Levitte [Fri, 22 Jan 2016 11:49:28 +0000 (12:49 +0100)]
Configurations - no_asm_filler is long gone, don't use it

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFix build failure with CIPHER_DEBUG
Alessandro Ghedini [Tue, 19 Jan 2016 21:15:33 +0000 (21:15 +0000)]
Fix build failure with CIPHER_DEBUG

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
8 years agoisalist(1) is obsolete; use isainfo(1)
mmiyashi [Mon, 27 Jul 2015 22:07:59 +0000 (17:07 -0500)]
isalist(1) is obsolete; use isainfo(1)

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoUpdated OSSL_DYNAMIC_VERSION/OSSL_DYNAMIC_OLDEST
Michał Trojnara [Thu, 14 Jan 2016 10:43:21 +0000 (11:43 +0100)]
Updated OSSL_DYNAMIC_VERSION/OSSL_DYNAMIC_OLDEST

Change to reflect changes in dynamic_fns

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
8 years agodsatest: use the correct BIO to print the test error
Marcus Meissner [Thu, 3 Dec 2015 14:19:53 +0000 (15:19 +0100)]
dsatest: use the correct BIO to print the test error

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
8 years agofew typo fixes
FdaSilvaYY [Sun, 17 Jan 2016 16:02:02 +0000 (17:02 +0100)]
few typo fixes

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
8 years agoRemove outdated conftest.c
Rich Salz [Fri, 22 Jan 2016 16:33:16 +0000 (11:33 -0500)]
Remove outdated conftest.c

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoRefactor config - @MK1MF_Builds out, general build scheme in
Richard Levitte [Mon, 18 May 2015 12:31:49 +0000 (14:31 +0200)]
Refactor config - @MK1MF_Builds out, general build scheme in

Time to get rid of @MK1MF_Builds and introduce a more flexible
'build_scheme' configuration key.  Its value may be a string or an
array of strings, meaning we need to teach resolve_config how to
handle ARRAY referenses.

The build scheme is a word that selects a function to create the
appropriate result files for a certain configuration.  Currently valid
build schemes aer "mk1mf" and "unixmake", the plan is however to add
at least one other for a more universal build scheme.

Incidently, this also adds the functions 'add' and 'add_before', which
can be used in a configuration, so instead of having to repeatedly
write a sub like this:

key1 => sub { join(" ", @_, "myvalues"); },
key2 => sub { join(" ", "myvalues", @_); },

one could write this:

key1 => add(" ", "myvalues"),
key2 => add_before(" ", "myvalues"),

The good point with 'add' and 'add_before' is that they handle
inheritances where the values are a misture of scalars and ARRAYs.  If
there are any ARRAY to be found, the resulting value will be an ARRAY,
otherwise it will be a scalar with all the incoming valued joined
together with the separator given as first argument to add/add_before.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefactor config - move templates and template docs to Configurations
Richard Levitte [Mon, 18 May 2015 00:54:28 +0000 (02:54 +0200)]
Refactor config - move templates and template docs to Configurations

Move the documentation of the target configuration form to
Configurations/README.

Move initial assembler object templates to
Configurations/00-BASE-templates.conf.

Furthermore, remove all variables containing the names of the
non-assembler object files and make a BASE template of them instead.
The  values from this templates are used as defaults as is.  The
remaining manipulation of data when assembler modules are used is done
only when $no_asm is false.

While doing this, clean out some other related variables that aren't
used anywhere.

Also, we had to move the resolution of the chosen target a bit, or the
function 'asm' would never catch a true $no_asm...  this hasn't
mattered before we've moved it all to the BASE template, but now it
does.

At the same time, add the default for the 'unistd' key to the BASE
template.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefresh the thinking of --prefix and --openssldir
Richard Levitte [Wed, 20 Jan 2016 17:11:51 +0000 (18:11 +0100)]
Refresh the thinking of --prefix and --openssldir

--prefix is now exclusively used for software and manual installation.
--openssldir is not exclusively used as a default location for certs,
keys and the default openssl.cnf.

This change is made to bring clarity, to have the two less
intertwined, and to be more compatible with the usual ways of software
installation.

Please change your habits and scripts to use --prefix rather than
--openssldir for installation location now.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoRT3863 ECC: Add missing NULL check. Set a flag
Billy Brumley [Thu, 21 Jan 2016 12:06:57 +0000 (14:06 +0200)]
RT3863 ECC: Add missing NULL check. Set a flag

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoRefactor config - throw away the last remains of '--test-sanity'
Richard Levitte [Thu, 21 Jan 2016 00:23:43 +0000 (01:23 +0100)]
Refactor config - throw away the last remains of '--test-sanity'

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoRefactor config - consolidate handling of disabled stuff
Richard Levitte [Mon, 18 May 2015 09:03:47 +0000 (11:03 +0200)]
Refactor config - consolidate handling of disabled stuff

It's time to refactor the handling of %disabled so that all
information of value is in the same place.  We have so far had a few
cascading disable rules in form of code, far away from %disabled.
Instead, bring that information to the array @disable_cascade, which
is a list of pairs of the form 'test => descendents'.  The test part
can be a string, and it's simply checked if that string is a key in
%disabled, or it can be a CODEref to do a more complex test.  If the
test comes true, then all descendents are disabled.  This check is
performed until there are no more things that need to be disabled.

Also, $default_depflags is constructed from the information in
%disabled instead of being a separate string.  While a string of its
own is visually appealing, it's much too easy to forget to update it
when something is changed in %disabled.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoRefactor config - rewrite handling of "reconf"
Richard Levitte [Mon, 18 May 2015 01:33:55 +0000 (03:33 +0200)]
Refactor config - rewrite handling of "reconf"

The way the "reconf"/"reconfigure" argument is handled is overly
complicated.  Just grep for it first, and if it is there in the
current arguments, get the old command line arguments from Makefile.

While we're at it, make the Makefile variable CONFIGURE_ARGS hold the
value as a perl list of strings.  This makes things much safer in case
one of the arguments would contain a space.  Since CONFIGURE_ARGS is
used for nothing else, there's no harm in this.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoMultiple -trusted/-untrusted/-CRLfile options in verify
Viktor Dukhovni [Sat, 16 Jan 2016 06:15:02 +0000 (01:15 -0500)]
Multiple -trusted/-untrusted/-CRLfile options in verify

It is sometimes useful (especially in automated tests) to supply
multiple trusted or untrusted certificates via separate files rather
than have to prepare a single file containing them all.

To that end, change verify(1) to accept these options zero or more
times.  Also automatically set -no-CAfile and -no-CApath when
-trusted is specified.

Improve verify(1) documentation, which could still use some work.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRefactor apps load_certs/load_crls to work incrementally
Viktor Dukhovni [Sat, 16 Jan 2016 05:08:38 +0000 (00:08 -0500)]
Refactor apps load_certs/load_crls to work incrementally

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoMore X509_verify_cert() tests via verify(1).
Viktor Dukhovni [Thu, 14 Jan 2016 23:10:27 +0000 (18:10 -0500)]
More X509_verify_cert() tests via verify(1).

Still need tests for trusted-first and tests that probe construction
of alternate chains.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoReject when explicit trust EKU are set and none match.
Viktor Dukhovni [Fri, 15 Jan 2016 08:49:11 +0000 (03:49 -0500)]
Reject when explicit trust EKU are set and none match.

Returning untrusted is enough for for full chains that end in
self-signed roots, because when explicit trust is specified it
suppresses the default blanket trust of self-signed objects.

But for partial chains, this is not enough, because absent a similar
trust-self-signed policy, non matching EKUs are indistinguishable
from lack of EKU constraints.

Therefore, failure to match any trusted purpose must trigger an
explicit reject.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoCommit pre-generated test_verify certs
Viktor Dukhovni [Fri, 15 Jan 2016 21:12:42 +0000 (16:12 -0500)]
Commit pre-generated test_verify certs

These can be re-generated via:

        cd test/certs; ./setup.sh

if need be.  The keys are all RSA 2048-bit keys, but it is possible
to change that via environment variables.

    cd test/certs
    rm -f *-key.pem *-key2.pem
    OPENSSL_KEYALG=rsa OPENSSL_KEYBITS=3072 ./setup.sh

    cd test/certs
    rm -f *-key.pem *-key2.pem
    OPENSSL_KEYALG=ecdsa OPENSSL_KEYBITS=secp384r1 ./setup.sh

    ...

Keys are re-used if already present, so the environment variables
are only used when generating any keys that are missing.  Hence
the "rm -f"

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoScripts to generate verify test certs
Viktor Dukhovni [Fri, 15 Jan 2016 08:48:27 +0000 (03:48 -0500)]
Scripts to generate verify test certs

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoCheck Suite-B constraints with EE DANE records
Viktor Dukhovni [Sun, 17 Jan 2016 21:50:52 +0000 (16:50 -0500)]
Check Suite-B constraints with EE DANE records

When DANE-EE(3) matches or either of DANE-EE/PKIX-EE fails, we don't
build a chain at all, but rather succeed or fail with just the leaf
certificate.  In either case also check for Suite-B violations.

As unlikely as it may seem that anyone would enable both DANE and
Suite-B, we should do what the application asks.

Took the opportunity to eliminate the "cb" variables in x509_vfy.c,
just call ctx->verify_cb(ok, ctx)

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
8 years agoRefactor config - split read_config into read_config and resolve_config
Richard Levitte [Mon, 18 May 2015 00:57:24 +0000 (02:57 +0200)]
Refactor config - split read_config into read_config and resolve_config

Split the read_config function into read_config that ONLY reads the
configuration files but doesn't try to resolve any of the
inheritances, and resolve_config which resolves the inheritance chain
of a given target.  Move them to the bottom of Configure, with the
rest of the helpers.

Have a new small hash table, %target, which will hold the values for
the target the user requested.  This also means that all access to the
current target data can be reduced from '$table{$target}->{key}' to a
mere '$target{key}'.

While we're at it, the old string formatted configurations are getting
obsolete, so they may as well get deprecated entirely.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefactor config - throw away '--test-sanity'
Richard Levitte [Mon, 18 May 2015 10:51:16 +0000 (12:51 +0200)]
Refactor config - throw away '--test-sanity'

Get rid of the --test-sanity option.  Since we no longer have string
based configurations, we don't have the problem with miscounting
colons any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRefactor config - a small cosmetic touchup of Configure
Richard Levitte [Mon, 18 May 2015 00:46:21 +0000 (02:46 +0200)]
Refactor config - a small cosmetic touchup of Configure

Start simple, removed some unused variables and change all '<<EOF' to
'<<"EOF"'.  The latter is because some code colorizers (notably, in
emacs) cannot recognise the here document end marker unless it's
quoted and therefore assume the rest of the file is part of the here
document.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoAdd an engine destructor to eng_cryptodev.
Richard Levitte [Tue, 19 Jan 2016 00:27:12 +0000 (01:27 +0100)]
Add an engine destructor to eng_cryptodev.

Reviewed-by: Ben Laurie <ben@openssl.org>
8 years agoAdapt BSD cryptodev engine to opaque EVP_MD_CTX, EVP_CIPHER_CTX, etc
Richard Levitte [Mon, 18 Jan 2016 23:46:42 +0000 (00:46 +0100)]
Adapt BSD cryptodev engine to opaque EVP_MD_CTX, EVP_CIPHER_CTX, etc

Reviewed-by: Ben Laurie <ben@openssl.org>
8 years agoRemove update tags
Rich Salz [Mon, 18 Jan 2016 16:50:36 +0000 (11:50 -0500)]
Remove update tags

Also remove depend/local_depend.
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoConsolidate "make update"
Rich Salz [Sun, 17 Jan 2016 21:53:53 +0000 (16:53 -0500)]
Consolidate "make update"

Rename 'update' to 'generate'.  Rather than recurse, just explicitly
call the three generate targets directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoHandle SSL_shutdown while in init more appropriately
Matt Caswell [Mon, 7 Dec 2015 16:50:38 +0000 (16:50 +0000)]
Handle SSL_shutdown while in init more appropriately

Calling SSL_shutdown while in init previously gave a "1" response, meaning
everything was successfully closed down (even though it wasn't). Better is
to send our close_notify, but fail when trying to receive one.

The problem with doing a shutdown while in the middle of a handshake is
that once our close_notify is sent we shouldn't really do anything else
(including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS before
acting on our close_notify - so we won't be able to read it because we're
not acting on CCS messages!

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agomake EVP_PKEY opaque
Dr. Stephen Henson [Tue, 19 Jan 2016 00:21:12 +0000 (00:21 +0000)]
make EVP_PKEY opaque

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRemove the GOST engine
Matt Caswell [Tue, 19 Jan 2016 12:06:33 +0000 (12:06 +0000)]
Remove the GOST engine

The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.

See:
https://wiki.openssl.org/index.php/Binaries

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix BSD -rpath parameter
Richard Levitte [Tue, 19 Jan 2016 19:35:41 +0000 (20:35 +0100)]
Fix BSD -rpath parameter

For BSD systems, Configure adds a shared_ldflags including a reference
to the Makefile variable LIBRPATH, but since it must be passed down to
Makefile.shared, care must be taken so the value of LIBRPATH doesn't
get expanded too early, or it ends up giving an empty string.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoAPI compat for SSLeay_add_ssl_algorithms
Viktor Dukhovni [Tue, 19 Jan 2016 17:42:31 +0000 (12:42 -0500)]
API compat for SSLeay_add_ssl_algorithms

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
8 years agoValidate ClientHello session_id field length and send alert on failure
Alessandro Ghedini [Thu, 8 Oct 2015 17:56:03 +0000 (19:56 +0200)]
Validate ClientHello session_id field length and send alert on failure

RT#4080

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoprf redirection build fixes
Dr. Stephen Henson [Tue, 19 Jan 2016 15:17:41 +0000 (15:17 +0000)]
prf redirection build fixes

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoUpdate license year range to 2016
Prayag Verma [Mon, 18 Jan 2016 03:19:09 +0000 (08:49 +0530)]
Update license year range to 2016

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoSupport disabling any or all TLS or DTLS versions
Viktor Dukhovni [Mon, 18 Jan 2016 18:10:21 +0000 (13:10 -0500)]
Support disabling any or all TLS or DTLS versions

Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2.  In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...

This commit makes it possible to disable any or all of the TLS or
DTLS protocols.  It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoAdd documentation for EVP_PKEY_TLS1_PRF
Dr. Stephen Henson [Tue, 19 Jan 2016 13:59:09 +0000 (13:59 +0000)]
Add documentation for EVP_PKEY_TLS1_PRF

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoadd TLS1-PRF tests
Dr. Stephen Henson [Tue, 19 Jan 2016 13:59:05 +0000 (13:59 +0000)]
add TLS1-PRF tests

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoAdd TLS1-PRF test support to evp_test
Dr. Stephen Henson [Tue, 19 Jan 2016 13:59:00 +0000 (13:59 +0000)]
Add TLS1-PRF test support to evp_test

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agouse TLS PRF
Dr. Stephen Henson [Tue, 19 Jan 2016 13:58:51 +0000 (13:58 +0000)]
use TLS PRF

Modify libssl to use EVP_PKEY TLS PRF.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoAdd TLS PRF method.
Dr. Stephen Henson [Tue, 19 Jan 2016 13:57:19 +0000 (13:57 +0000)]
Add TLS PRF method.

Add EVP_PKEY algorithm for TLS1 PRF.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoFix GOST2012-NULL-GOST12
Dmitry Belyavsky [Tue, 19 Jan 2016 11:36:43 +0000 (11:36 +0000)]
Fix GOST2012-NULL-GOST12

Fix a typo in the definition of the GOST2012-NULL-GOST12 ciphersuite.

RT#4213

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>