Configurations: fix typo in 50-masm.conf.

Reviewed-by: Richard Levitte <levitte@openssl.org>

evp/aes_aes.c: engage Fujitsu SPARC64 X AES support.

Reviewed-by: Richard Levitte <levitte@openssl.org>

sparcv9cap.c: add Fujitsu SPARC64 X AES capability detection.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add AES assembly module for Fujitsu SPARC64 X/X+.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Configuration: add unsupported masm target.

Reviewed-by: Richard Levitte <levitte@openssl.org>

perlasm/x86_64-xlate.pl: make latest ml64 work.

Reviewed-by: Richard Levitte <levitte@openssl.org>

poly1305/asm/poly1305-x86_64.pl: not all assemblers manage << in constants.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Typo, asoutflag -> perlasm_scheme

Reviewed-by: Tim Hudson <tjh@openssl.org>

Only allow Microsoft assembler with no-asm on Windows

This also restores the possibility to have ml used with VC-WIN32 with
no-asm, which was lost during the mk1mf -> unified transition.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Build: Make 'test' depend on 'tests'

Because we have a directory 'test', the target 'test' may be confusing
to make.  However, if we make it depend on 'tests', which doesn't
exist, make should never fail to run the actions.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Prepare for 1.1.0-pre6-dev

Reviewed-by: Rich Salz <rsalz@openssl.org>

Prepare for 1.1.0-pre5 release

Reviewed-by: Rich Salz <rsalz@openssl.org>

Unsigned chars can't be negative

Fix a problem where an unsigned char was being checked to see if it was
negative.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix PKCS7 memory leak

Commit f0e0fd51f was a bit over-zealous in removing a call to
X509_STORE_CTX_cleanup(). The call in question was in a loop and was
required to cleanup resources used on each iteration of the loop. Removing
this resulted in a memory leak.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Make string_to_hex/hex_to_string public

Give the API new names, document it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Rename some lowercase API's

Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...

Reviewed-by: Richard Levitte <levitte@openssl.org>

NOTES files will contain more requirements, make that explicit

Reviewed-by: Rich Salz <rsalz@openssl.org>

Haiku x86-64 doesn't need RC4_CHAR.

* add a comment about Haiku being built with no-asm.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Free methods on destroy.

Reviewed-by: Matt Caswell <matt@openssl.org>

Free engine on error.

Reviewed-by: Matt Caswell <matt@openssl.org>

Opacity.

Reviewed-by: Matt Caswell <matt@openssl.org>

Signed/unsigned compare.

Reviewed-by: Matt Caswell <matt@openssl.org>

Restore OCSP_basic_verify() error return semantics

Recently, OCSP_basic_verify() was changed to always return 0 on error,
when it would previously return 0 on error and < 0 on fatal error.
This restores the previous semantics back.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove declaration of function that isn't implemented

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add X509_STORE_CTX_set0_untrusted function.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Small OCSP fixup

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Make many X509_xxx types opaque.

Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Don't use a default for --with-zlib-lib on Windows with option 'zlib'

To begin with, the default should have been the import library, not
the DLL itself.  However, we don't know what directory it's installed
in either way, so we may as well demand the full path from the user

Reviewed-by: Matt Caswell <matt@openssl.org>

ex_libs settings have to be added to, not overriden, on Windows too

Reviewed-by: Matt Caswell <matt@openssl.org>

Update Travis and Appveyor for change to shared by default

Update the Travis and Appveyor builds to explicitly state no-shared where
applicable.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Make "shared" builds the default

In most cases we expect that people will be using shared libraries not
static ones, therefore we make that the default.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix ex_data locks issue

Travis identified a problem with freeing the ex_data locks which wasn't
quite right in ff2344052. Trying to fix it identified a further problem:
the ex_data locks are cleaned up by OPENSSL_cleanup(), which is called
explicitly by CRYPTO_mem_leaks(), but then later the BIO passed to
CRYPTO_mem_leaks() is freed. An attempt is then made to use the ex_data
lock already freed.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add Haiku support.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix installation on VMS for no-stdio and no-autoalginit

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix installation for no-stdio and no-autoalginit

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix no-stdio and no-autoalginit

no-stdio does not work with the apps. Since the tests also need the apps
it doesn't support that either. Therefore we disable building of both.

no-autoalginit is not compatible with the apps because it requires explicit
loading of the algorithms, and the apps don't do that. Therefore we disable
building the apps for this option. Similarly the tests depend on the apps
so we also disable the tests. Finally the whole point about no-autoalginit
is to avoid excessive executable sizes when doing static linking. Therefore
we disable "shared" if this option is selected.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The err_cleanup() funtion is internal so shouldn't be exported

Running a "make update" wanted to add err_cleanup to libcrypto.num which
is wrong.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Write POD page.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add SSL_SESSION_get0_hostname()

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ensure all locks are properly cleaned up

Some locks were not being properly cleaned up during close down.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix the spelling of "implement".

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix AFALG kernel and headers mismatch problem

During Configure we attempt to check the kernel version of this platform
to see whether we can compile the AFALG engine. If the kernel version
looks recent enough then we enable AFALG. However when we compile
e_afalg.c we check the version of the linux headers. If there is a
mismatch between the linux headers and the currently running kernel then
we don't compile the AFLAG engine and continue. This was causing a link
error.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Bugfix: in asn1parse avoid erroneous len after a sub-sequence

Introduced in:

    commit 79c7f74d6cefd5d32fa20e69195ad3de834ce065
    Author: Ben Laurie <ben@links.org>
    Date:   Tue Mar 29 19:37:57 2016 +0100

    Fix buffer overrun in ASN1_parse().

Problem input:

    https://tools.ietf.org/html/draft-ietf-curdle-pkix-eddsa-00#section-8.1
    -----BEGIN PUBLIC KEY-----
    MC0wCAYDK2VkCgECAyEAGb9ECWmEzf6FQbrBZ9w7lshQhqowtrbLDFw4rXAxZuE=
    -----END PUBLIC KEY-----

Previously:

        0:d=0  hl=2 l=  45 cons: SEQUENCE
        2:d=1  hl=2 l=   8 cons: SEQUENCE
        4:d=2  hl=2 l=   3 prim: OBJECT            :1.3.101.100
        9:d=2  hl=2 l=   1 prim: ENUMERATED        :02
    Error in encoding
    140735164989440:error:0D07207B:asn1 encoding routines:ASN1_get_object:header too long:../openssl/crypto/asn1/asn1_lib.c:148:

Now:

    0:d=0  hl=2 l=  45 cons: SEQUENCE
    2:d=1  hl=2 l=   8 cons: SEQUENCE
    4:d=2  hl=2 l=   3 prim: OBJECT            :1.3.101.100
    9:d=2  hl=2 l=   1 prim: ENUMERATED        :02
   12:d=1  hl=2 l=  33 prim: BIT STRING
      0000 - 00 19 bf 44 09 69 84 cd-fe 85 41 ba c1 67 dc 3b   ...D.i....A..g.;
      0010 - 96 c8 50 86 aa 30 b6 b6-cb 0c 5c 38 ad 70 31 66   ..P..0....\8.p1f
      0020 - e1                                                .

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't use deprecated CONF_modules_free() in tests

Reviewed-by: Richard Levitte <levitte@openssl.org>

make update

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add a CHANGES entry for removal of Configure options

Document removal of no-aes, no-hmac, no-rsa, no-sha and no-md5.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update INSTALL file based on feedback

Update the config options documentation based on feedback.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update the INSTALL instructions with lots of options

There were a lot of options missing from INSTALL. This adds descriptions
for them.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove OPENSSL_NO_HMAC

no-hmac is no longer an option so remove OPENSSL_NO_HMAC guards.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove OPENSSL_NO_SHA guards

no-sha is no longer an option so remove OPENSSL_NO_SHA guards.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove OPENSSL_NO_AES guards

no-aes is no longer a Configure option and therefore the OPENSSL_NO_AES
guards can be removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove no-aes, no-rsa, no-sha, no-md5 and no-hmac

These algorithms are fundamental and extensively used. The "no-" options
do not work either in 1.1.0 or in other released branches. Therefore the
ability to disable them should be removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Need err_load_crypto_strings_int declared.

Reviewed-by: Matt Caswell <matt@openssl.org>

make update

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove check_defer()

The check_defer() function was used to ensure that EVP_cleanup() was always
called before OBJ_cleanup(). The new cleanup code ensures this so it is
no longer needed.

Remove obj_cleanup() call in OID config module: it is not needed
any more either.

Reviewed-by: Matt Caswell <matt@openssl.org>

Rename internal symbol to follow internal naming pattern

Reviewed-by: Matt Caswell <matt@openssl.org>

Cleanup libcrypto.num and make update

Reviewed-by: Matt Caswell <matt@openssl.org>

Move a declaration that's private to libcrypto

Don't expose purely libcrypto internal symbols, even to libssl.

Reviewed-by: Matt Caswell <matt@openssl.org>

PPC assebmly pack: initial POWER9 support tidbits.

Reviewed-by: Richard Levitte <levitte@openssl.org>

chacha/asm/chacha-armv8.pl: fix intermittent build failures.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't use FORMAT_BASE64 format when compressing / decompressing

When compressing, the output / input is a binary format, not a text
format like BASE64.  This is important on Windows, where a ^Z in a
text file is seen as EOF, and there could be a ^Z somewhere in a
compressed file, cutting it short as input.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix the handling of --with-zlib-include

The handling was Unix centric, already in Configure.  Change that to
just collect the value and let the build file templates figure out
what to do with it.

Reviewed-by: Matt Caswell <matt@openssl.org>

Remake the way dynamic zlib is loaded

Instead of absolute hard coding of the libz library name, have it use
the macro LIBZ, which is set to defaults we know in case it's
undefined.

This allows our configuration to set something that's sane on current
or older platforms, and allows the user to override it by defining
LIBZ themselves.

Reviewed-by: Matt Caswell <matt@openssl.org>

Configuration: Simplify the way vms information is retrieved

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix zlib configuration options.

The macros ZLIB and ZLIB_SHARED weren't appropriately defined,
deviating wrongly from how they worked in earlier OpenSSL versions.
So, restore it so that ZLIB is defined if configured "enable-zlib" and
so that ZLIB and ZLIB_SHARED are defined if configured
"enable-zlib-dynamic".

Additionally, correct the interpretation of the --with-zlib-lib value
on Windows and VMS, where it's used to indicate the actual zlib
zlib library file / logical name, as that can differ depending on zlib
version and packaging on those platforms.

Finally for Windows and VMS, we also define the macro LIBZ with that
file name / logical name when configured "zlib-dynamic", so the
compression unit can pick it up and use it.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix no-tls1_1 and no-tls1_2

The above config options were failing in test_ssl_old.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Rename int_*() functions to *_int()

There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Tweak to documentation

Tweak to documentation following feedback

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Misc fix ups to deprecate explicit de-init documentation

Documentation fix ups as a result of feedback received.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix explicit de-init macros

The no-op de-init macros may fail because of extraneous ";", so we use
a slightly different construct instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix symbols missing from shared build

libssl needs to have access to some internal libcrypto symbols.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Rename lots of *_intern or *_internal function to int_*

There was a lot of naming inconsistency, so we try and standardise on
one form.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Add a CHANGES entry for the deprecated cleanup functions

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

make update

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate CONF_modules_free() and make it a no-op

CONF_modules_free() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate ENGINE_cleanup() and make it a no-op

ENGINE_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate OBJ_cleanup() and make it a no-op

OBJ_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate EVP_cleanup() and make it a no-op

EVP_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate BIO_sock_cleanup() and make it a no-op

BIO_sock_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate CRYPTO_cleanup_all_ex_data() and make it a no-op

CRYPTO_cleanup_all_ex_data() should not be called expicitly - we should
leave auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate RAND_cleanup() and make it a no-op

RAND_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix conditional compile logic in speed.c

The conditional compile logic wasn't quite right in speed.c for when
both OPENSSL_NO_DSA and OPENSSL_NO_EC are defined.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate SSL_COMP_free_compression_methods() and make it a no-op

SSL_COMP_free_compression_methods() should not be called expicitly - we
should leave auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate ERR_free_strings() and make it a no-op

ERR_free_strings() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Deprecate COMP_zlib_cleanup() and make it a no-op

COMP_zlib_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

X509_PUBKEY docs

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Fix setting of debug callback in apps/enc.c

Setting the debug callback on the in and out BIOs were done too early.
No debug callback was set on the zlib filter BIO.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add SSL_CTX_get_ciphers()

Add an accessor for SSL_CTX.

Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix the no-posix-io option

Fix a compile failure with no-posix-io

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove an unused function

The function pqueue_print is not exported and is never called. Therefore
we should delete it.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix the no-tls option

The no-tls option was failing in the tests. This fixes it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix the no-nextprotoneg option

Misc fixes to get no-nextprotoneg config option working again.

Reviewed-by: Rich Salz <rsalz@openssl.org>

BIO: respect opening in text mode

When a file is opened with BIO_new_file(), make sure that the internal
mode TEXT vs BINARY setting reflects what's given in the mode string.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Disable some sanitizer checks without PEDANTIC

Code without PEDANTIC has intentional "undefined" behaviour. To get best
coverage for both PEDANTIC and non-PEDANTIC codepaths, run the sanitizer
builds in two different configurations:
1) Without PEDANTIC but with alignment checks disabled.
2) With PEDANTIC.

To not overload Travis too much, run one build with clang and the other
with gcc (chosen at random).

Also remove a micro-optimization in CAST code to be able to
-fsanitize=shift. Whether shift sanitization is meaningful for crypto or
an obstacle is debatable but since this appears to be the only offender,
we might as well keep the check for now.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix warnings exposed by clang-3.8

Reviewed-by: Richard Levitte <levitte@openssl.org>

Adjust --strict-warnings builds in Travis

In Travis, do --strict-warnings on BUILDONLY configurations. This
ensures that the tests run even if --strict-warnings fail, and avoids
hiding unrelated test failures.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't check the generated ssl-tests configs on VMS

The simple reason is that the pre-generated files are mainly for Unix.
The VMS variants look slightly different, so comparing will always fail.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

VMS doesn't have directory separators in the same sense as Unix

Don't add / in file specs on VMS.  The directory "separator" is part
of the directory spec.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

RSA: the docs still talk about RSA_PKCS1_SSLeay

Rename the function to RSA_PKCS1_OpenSSL.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Add CHANGES entry for DH and DH_METHOD opacity

Reviewed-by: Richard Levitte <levitte@openssl.org>