Luka Perkov [Wed, 16 Oct 2013 03:25:58 +0000 (03:25 +0000)]
imx6: enable fixed voltage reulator
Fixed voltage regulator support is required by several drivers that have
regulator consumers, such as the sgtl5000 audio codec used on many i.MX6
boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38426
Luka Perkov [Wed, 16 Oct 2013 03:25:57 +0000 (03:25 +0000)]
imx6: add support for gw52xx
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:
* i.MX6DL 512MB DDR3
* 256MB NAND FLASH
* 2x PCIe
* 1x USB EHCI (to PCIe socket2)
* 1x USB OTG (to front panel or PCIe socket1)
* 1x uSD
* LVDS
* HDMI AudioVideo out
* Analog Video in
* Digital IO
* Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38425
Luka Perkov [Wed, 16 Oct 2013 03:25:55 +0000 (03:25 +0000)]
imx6: dts: update ventana dts
- fix spi chipselect for GW5400-A
- fix audmux pinctrl for GW54xx
- remove unused alias nodes
- remove unused regulator nodes (will be adding pmic nodes next)
- remove duplicate eeprom entries
- add regulator definitions
- fix sgtl5000 regulator reference
- add egalax touchscreen controller interrupt
- fix gw5400-a audmux pinctrl
- fix usb ehci alias
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38424
Luka Perkov [Wed, 16 Oct 2013 03:25:54 +0000 (03:25 +0000)]
imx6: split out ventana init patch from devicetree
SVN-Revision: 38423
Luka Perkov [Wed, 16 Oct 2013 03:25:52 +0000 (03:25 +0000)]
imx6: add pfuze100 regulator support
- backport driver
- apply patch to allow misprogrammed parts
- enable driver in kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38422
Luka Perkov [Wed, 16 Oct 2013 03:25:51 +0000 (03:25 +0000)]
imx6: minor (cosmetic) changes in uci-defaults
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38421
Luka Perkov [Wed, 16 Oct 2013 03:25:49 +0000 (03:25 +0000)]
imx6: add back bootargs
They make our life easier when testing ramdisk images.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38420
Luka Perkov [Tue, 15 Oct 2013 21:37:31 +0000 (21:37 +0000)]
ubifs: remove breaking commas from ubi calls
The extra commas get output by the shell resulting in errors since
the commands that get called with those extra commas are then
malformed.
Signed-off-by: Joris de Vries <joris@apptrician.nl>
SVN-Revision: 38419
John Crispin [Tue, 15 Oct 2013 14:56:49 +0000 (14:56 +0000)]
ralink: fix default vlan mapping for MT7620a_MT7610e
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38418
Jo-Philipp Wich [Tue, 15 Oct 2013 13:10:32 +0000 (13:10 +0000)]
dropbear: add dropbear.nl mirror, provided by dropbear maintainer
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
SVN-Revision: 38413
Luka Perkov [Tue, 15 Oct 2013 12:42:58 +0000 (12:42 +0000)]
openvpn: make comp_lzo a parameter
Possible parameters are yes, no and adaptive. See manpage for more information.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
SVN-Revision: 38412
Jo-Philipp Wich [Tue, 15 Oct 2013 12:23:21 +0000 (12:23 +0000)]
openvpn-easy-rsa: restore essential patch to make it actually work on the target (#14324)
SVN-Revision: 38411
Luka Perkov [Tue, 15 Oct 2013 11:32:28 +0000 (11:32 +0000)]
uci: upgrade to latest git version
Fixes issues with UBIFS file system when due to unclean shutdown files would
end up with size 0. Furthermore, few style fixes are included too.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38410
Felix Fietkau [Tue, 15 Oct 2013 11:20:06 +0000 (11:20 +0000)]
mpc85xx: revert the napi polling code to the one from an older kernel version to fix stability issues (#14020)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38409
Zoltan Herpai [Mon, 14 Oct 2013 22:43:50 +0000 (22:43 +0000)]
imx23: build DCP crypto co-processor support by default
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38408
Zoltan Herpai [Mon, 14 Oct 2013 21:22:40 +0000 (21:22 +0000)]
mxs: add support for I2SE Duckbill devices
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38407
Zoltan Herpai [Mon, 14 Oct 2013 21:00:01 +0000 (21:00 +0000)]
mxs: improve image generation support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38406
Zoltan Herpai [Mon, 14 Oct 2013 19:53:06 +0000 (19:53 +0000)]
mxs: enable device tree support in /proc
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38405
Luka Perkov [Mon, 14 Oct 2013 19:46:45 +0000 (19:46 +0000)]
kirkwood: drop 3.3.x kernel version
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38404
Luka Perkov [Mon, 14 Oct 2013 19:46:43 +0000 (19:46 +0000)]
uboot-envtools: update kirkwood scripts
Also, scripts can be installed as data so let's change that here too.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38403
Luka Perkov [Mon, 14 Oct 2013 19:46:40 +0000 (19:46 +0000)]
kirkwood: upgrade to 3.10.15
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38402
Zoltan Herpai [Mon, 14 Oct 2013 19:45:31 +0000 (19:45 +0000)]
elftosb: support static linking
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38400
Felix Fietkau [Mon, 14 Oct 2013 19:40:30 +0000 (19:40 +0000)]
rt2x00: fix rf id for rt3352 (#14322)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38399
Felix Fietkau [Mon, 14 Oct 2013 19:38:42 +0000 (19:38 +0000)]
ath9k: add some more pending fixes / optimizations
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38398
Felix Fietkau [Mon, 14 Oct 2013 19:20:05 +0000 (19:20 +0000)]
ath5k: fix tx status processing errors (causing packet loss and throughput issues)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38396
Felix Fietkau [Mon, 14 Oct 2013 19:20:02 +0000 (19:20 +0000)]
ath9k: reduce rx buffer allocation size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38395
Zoltan Herpai [Mon, 14 Oct 2013 19:01:23 +0000 (19:01 +0000)]
imx23: rename imx23 to mxs for upcoming imx23/28 support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38394
Steven Barth [Mon, 14 Oct 2013 18:53:02 +0000 (18:53 +0000)]
odhcp6c: various fixes
* Make SOL_MAX_RT configurable and default back to 120s
* Prefer servers with bigger prefixes (allows to use Comcast /60)
* Don't hang indefinitely if DHCPv6 REQUEST is not answered
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 38393
Jo-Philipp Wich [Mon, 14 Oct 2013 13:01:06 +0000 (13:01 +0000)]
ubox: fix extroot after kmodloader changes
The kmodloader executable disregarded the global directory prefix in
scan_module_folder() leading to a broken extroot for non-builtin modules.
Update to current git head to fix the prefix handling again.
SVN-Revision: 38392
Steven Barth [Mon, 14 Oct 2013 08:09:58 +0000 (08:09 +0000)]
opkg: ignore empty fields in package lists
This is to work around issues with package list generators creating
empty fields in some environments.
Based on a patch by Paul Selkrik <pselkrik@isc.org>
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 38390
Hauke Mehrtens [Sun, 13 Oct 2013 22:51:33 +0000 (22:51 +0000)]
iputils: do not compile this for brcm47xx with -O2
ping is now working for me with -Os on brcm47xx.
This revert r26278.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38389
Hauke Mehrtens [Sun, 13 Oct 2013 22:46:18 +0000 (22:46 +0000)]
brcm47xx: activate ARP daemon support
This just add some bytes to the kernel and is activated on other targets.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38388
Hauke Mehrtens [Sun, 13 Oct 2013 22:15:31 +0000 (22:15 +0000)]
switch: remove old switch driver
The switch driver is not used by brcm47xx any more and can be removed,
instead of this switch driver b53 is used now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38387
Hauke Mehrtens [Sun, 13 Oct 2013 22:10:57 +0000 (22:10 +0000)]
cobalt: do not build userland with support for mips1
Without specifying -march gcc uses -march=mips1 by default, but that
causes problems when compiling openssl. Use -march=r5000 instead to
compile a userland optimized for the CPU used on this device.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38386
Hauke Mehrtens [Sun, 13 Oct 2013 20:25:12 +0000 (20:25 +0000)]
mac80211: b43: fix prefix for config options
Config options in backports are starting with CPTCFG and not with CONFIG_.
CONFIG_B43_BCMA was never true.
This closes #13883.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38385
Hauke Mehrtens [Sun, 13 Oct 2013 19:28:29 +0000 (19:28 +0000)]
kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38384
Hauke Mehrtens [Sun, 13 Oct 2013 19:27:24 +0000 (19:27 +0000)]
brcm47xx: fix detection of some boards
This adds some more boards.
This fixes parts of #14316 and #14133.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38383
Vasilis Tsiligiannis [Sun, 13 Oct 2013 18:39:09 +0000 (18:39 +0000)]
ar71xx: Fix sysupgrade when upgrading to images with small rootfs partition
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 38382
Luka Perkov [Sun, 13 Oct 2013 03:35:15 +0000 (03:35 +0000)]
ubifs: when creating ubi(fs) images profile originated arguments have priority
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38381
Luka Perkov [Sun, 13 Oct 2013 03:35:14 +0000 (03:35 +0000)]
image: introduce MkuImageARM function
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38380
Luka Perkov [Sun, 13 Oct 2013 03:35:13 +0000 (03:35 +0000)]
kirkwood: enable appended dtb (3.10.x)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38379
Hauke Mehrtens [Sat, 12 Oct 2013 22:36:08 +0000 (22:36 +0000)]
zd1201: fix url to zd1201 firmware
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38378
Hauke Mehrtens [Sat, 12 Oct 2013 22:34:45 +0000 (22:34 +0000)]
yaffs2: the yaffs2 git moved
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38377
Hauke Mehrtens [Sat, 12 Oct 2013 22:33:55 +0000 (22:33 +0000)]
lantiq: add some missing PKG_SOURCE_URLs
These URLs where missing and causes build failures.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38376
Luka Perkov [Sat, 12 Oct 2013 21:44:48 +0000 (21:44 +0000)]
ubifs: enable building modular images
Now it is possible to build ubi/ubifs images for only selected boards inside
single target.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38375
Luka Perkov [Sat, 12 Oct 2013 21:44:46 +0000 (21:44 +0000)]
image: if possible use profile name when building .tar.gz images
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38374
Luka Perkov [Sat, 12 Oct 2013 16:26:55 +0000 (16:26 +0000)]
kernel: add kirkwood thermal module
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38371
Jonas Gorski [Sat, 12 Oct 2013 10:50:47 +0000 (10:50 +0000)]
ar7: drop linux 3.9 support
Linux 3.9 is EOL since quite a while, no need to keep support for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38370
Jonas Gorski [Sat, 12 Oct 2013 10:50:44 +0000 (10:50 +0000)]
ar7: add support for linux 3.10 and switch to it
Run tested on WAG354Gv2.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38369
Jonas Gorski [Sat, 12 Oct 2013 10:50:39 +0000 (10:50 +0000)]
mvswitch: fix compilation for linux 3.10
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38368
Jonas Gorski [Sat, 12 Oct 2013 10:50:35 +0000 (10:50 +0000)]
acx-mac80211: update to latest version
Fixes compilation for linux 3.10.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38367
Jonas Gorski [Sat, 12 Oct 2013 10:50:19 +0000 (10:50 +0000)]
ar7-atm: fix compilation for linux 3.10
Update proc code to new proc_create to allow compilation with
linux 3.10+.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38366
Jo-Philipp Wich [Fri, 11 Oct 2013 18:33:15 +0000 (18:33 +0000)]
dnsmasq: add option broadcast to host sections
There are certain consumer devices which are outliers in protocol conformance.
An example is Samsung bluray players, which require broadcast DHCP responses
(on Ethernet only, strangely not on Wifi).
By specifying:
config host
...
option broadcast 1
this will enable the response to be sent as an Ethernet broadcast and not as
a unicast.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 38365
Imre Kaloz [Fri, 11 Oct 2013 15:41:42 +0000 (15:41 +0000)]
make the generated images actually flashable on the Unifi devices.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38364
Felix Fietkau [Thu, 10 Oct 2013 21:10:45 +0000 (21:10 +0000)]
ath9k: fix rx issues introduced in my last commit (fixes #14307)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38362
Jo-Philipp Wich [Thu, 10 Oct 2013 18:15:10 +0000 (18:15 +0000)]
firewall: small improvements in nat reflection
- do not insert duplicate rules when setting up reflection to a zone containing multiple interfaces
- set up reflection for any protocol, not just TCP and UDP
SVN-Revision: 38361
Jo-Philipp Wich [Thu, 10 Oct 2013 15:01:50 +0000 (15:01 +0000)]
Incorrect checkout of git submodules
When checking out git packages, buildroot doesn't seem to track the revisions
correctly of any submodules referenced by that project. As a result, the
submodule stays at whatever revision was referenced by the head of the master
branch. Running a 'git submodule update' after the checkout fixes this problem.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 38359
Jo-Philipp Wich [Thu, 10 Oct 2013 14:58:12 +0000 (14:58 +0000)]
ppp: correct module loaded check in proto_pptp_setup
proto_pptp_setup is responsible for loading the required modules to establish
a pptp connection to a foreign peer. The function checks whether all required
modules are already loaded, before actually loading them.
It seems that the filter being used to accomplish this, is not restrictive
enough in some cases. For instance when pptp nat helper modules are present on
a system, and already loaded before a pptp connection is enabled. Then the
search filter (possibly) returns the following for module=pptp, where actually
no matches are expected, resulting in the pptp.ko module not being loaded,
thereby failing to establish the pptp connection.
# module="pptp" ; grep "$module" /proc/modules
nf_nat_pptp 1312 0 - Live 0x86ce7000
nf_conntrack_pptp 3072 1 nf_nat_pptp, Live 0x86cb9000
nf_nat_proto_gre 784 1 nf_nat_pptp, Live 0x86cba000
nf_conntrack_proto_gre 2368 1 nf_conntrack_pptp, Live 0x86cbf000
nf_nat 9792 13 nf_nat_rtsp,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_h323,nf_nat_proto_gre,nf_nat_amanda,nf_nat_irc,nf_nat_ftp,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,iptable_nat, Live 0x86ca8000
nf_conntrack 37264 31 nf_nat_rtsp,nf_conntrack_rtsp,nf_nat_tftp,nf_conntrack_tftp,nf_nat_snmp_basic,nf_conntrack_snmp,nf_nat_sip,nf_conntrack_sip,nf_nat_pptp,nf_conntrack_pptp,nf_nat_h323,nf_conntrack_h323,nf_conntrack_proto_gre,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_broadcast,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_helper,xt_connmark,xt_connbytes,xt_conntrack,xt_CT,xt_NOTRACK,xt_state,nf_conntrack_ipv4, Live 0x86c90000
The search filter can be made more accurate/restrictive, by requiring the
occurance of the exact name of the module at the beginning of a line in
/proc/modules.
# module="pptp" ; grep "^$module " /proc/modules
pptp 13296 2 - Live 0x86e80000
Signed-off-by: Tijs Van Buggenhout <tvb@able.be>
SVN-Revision: 38358
Jo-Philipp Wich [Thu, 10 Oct 2013 14:42:05 +0000 (14:42 +0000)]
dropbear: update to 2013.59 (released 4 october 2013)
- drop mirror www.mirrors.wiretapped.net (not working anymore)
- drop patch 300-ipv6_addr_port_split.patch, included upstream
- refresh patches
- various upstream changes: http://matt.ucc.asn.au/dropbear/CHANGES
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
SVN-Revision: 38356
Jo-Philipp Wich [Thu, 10 Oct 2013 14:40:52 +0000 (14:40 +0000)]
x86: kvm: disable squashfs and jffs2 images by default
SVN-Revision: 38355
Felix Fietkau [Thu, 10 Oct 2013 14:31:22 +0000 (14:31 +0000)]
ath9k: add some cleanups and minor fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38354
Hauke Mehrtens [Thu, 10 Oct 2013 11:13:54 +0000 (11:13 +0000)]
kernel: add default config for ARM_ERRATA symbols for kernel 3.3
Commit r37470 did not add a default conig for the ARM_ERRATA symbols for kernel 3.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38352
Luka Perkov [Wed, 9 Oct 2013 11:25:09 +0000 (11:25 +0000)]
openvpn: rework initscript (fixes #14299)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38351
Felix Fietkau [Wed, 9 Oct 2013 11:07:23 +0000 (11:07 +0000)]
procd: fix command handling in procd_add_instance()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38350
Imre Kaloz [Wed, 9 Oct 2013 11:03:00 +0000 (11:03 +0000)]
IPv6 support should depend on if we've enabled it
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38349
John Crispin [Wed, 9 Oct 2013 10:08:52 +0000 (10:08 +0000)]
ralink: fixes mpr a1/a2 network setup
Signed-off-by: Suschman <suschman@gmx.net>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38348
Hauke Mehrtens [Wed, 9 Oct 2013 09:13:41 +0000 (09:13 +0000)]
mac80211: rtlwifi: Align private space in rtl_priv struct
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38346
John Crispin [Tue, 8 Oct 2013 21:10:15 +0000 (21:10 +0000)]
ralink: add support for the mt7530 eval board
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38345
John Crispin [Tue, 8 Oct 2013 21:10:00 +0000 (21:10 +0000)]
ralink: add missing header file to mt7530 driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38344
John Crispin [Tue, 8 Oct 2013 15:28:33 +0000 (15:28 +0000)]
lantiq: fix up diag.sh
init no longer exists as a parameter
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38342
John Crispin [Tue, 8 Oct 2013 15:08:33 +0000 (15:08 +0000)]
kernel: dont rely on library modules to be depended on
fixes https://dev.openwrt.org/ticket/14257
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38341
John Crispin [Tue, 8 Oct 2013 15:08:23 +0000 (15:08 +0000)]
kernel: remove debug code from module insert script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38340
Felix Fietkau [Tue, 8 Oct 2013 11:09:52 +0000 (11:09 +0000)]
hostapd: recognize 8021x as an authentication mode
Currently, in order to configure the authentication daemon in
8021x mode, we need to set wireless.@wifi-iface[0].encryption="wpa"
Though it works it confuses folks as 8021x is using WEP
encryption and not WPA. Therefore the terminology itself is
confusing. This change adds 8021x as a recognized string for 8021x
authentication.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38339
Felix Fietkau [Tue, 8 Oct 2013 11:09:48 +0000 (11:09 +0000)]
hostapd: add external registrar support
Setting wireless.@wifi-iface[N].ext_registrar=1 will enable UPNP
advertising and add an external registrar to the interface this vif
belongs to (br-lan if the vif is included in the LAN bridge). By
enabling this we append upnp_iface=xxx to the hostapd config file.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38338
Felix Fietkau [Tue, 8 Oct 2013 11:09:44 +0000 (11:09 +0000)]
hostapd: enable WPS2 support on hostapd-full.config
Enable CONFIG_WPS2 for hostapd. This is required to support
options like Virtual Push Button in WPS.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38337
Felix Fietkau [Tue, 8 Oct 2013 11:09:40 +0000 (11:09 +0000)]
hostapd: fix hostapd RSN preauthentication PMKSA caching
In 2009 OpenWrt's hostapd config added an "auth_cache" boolean
to be used to address a reported issue #12129 [0] on a forum [1].
The reported issue on the ticket is different that the one
described on the forum. The commit was r33359. This change broke
proper RSN preauthentication [2] [3] [4] expectations on hostapd's
configuration for WPA2 and this in turn disabled PMKSA caching and
Opportunistic Key Caching. This change:
* Leaves the "auth_cache" to be used only for WPA networks for those
looking to use this as a workaround to a reported issue but annotates
a warning over its usage.
* Separate "auth_cache" from WPA2 RSN preauthentication, leaving
WPA2 RSN preauthentication to enabled only with "rsn_preauth" with
the expected and recommended settings.
* Adds a new WPA2 RSN preauthentication "rsn_preauth_testing" to
be used when evaluating funcionality for WPA2 RSN preauthentication
with the expected and recommended settings with the only difference
so far with what should be enabled by default to disable Opportunistic
Key Caching.
Disabling the PMKSA cache should mean the STA could not roam off and back
onto the AP that had PMKSA caching disabled and would require a full
authentication cycle. This fixes this for WPA2 networks with
RSN preauthentication enabled.
This change should be applied to AA as well as trunk.
TL DR;
The issue described on the forum has to do with failure of a STA
being able to try to authenticate again with the AP if it failed
its first try. This may have been an issue with hostapd in 2009
but as per some tests I cannot reproduce this today on a WPA2
network.
The issue described on the ticket alludes to a security issue with the
design of using a Radius server to authenticate to an AP. The issue
vaguely alludes to the circumstances of zapping a user, deleting their
authentication credentials to log in to the network, and that if
RSN preauthentication is enabled with PMKSA caching that the user
that was zapped would still be able to authenticate.
Lets treat these as separate issues.
I cannot reproduce the first issue reported on the forums of not
being able to authenticate anymore on a WPA2 network.
The issue reported on the ticket modified WPA2 RSN preauthentication
by adding two fields to the hostapd configuration if auth_cache
was enabled:
* disable_pmksa_caching=1
* okc=0
The first one disables PMKSA authentication cache.
The second one disables Opportunistic Key Caching.
The issue reported on the ticket was fixed by implementing a workaround
in hostapd's configuration. Disabling PMKSA caching breaks proper use
of WPA2 RSN pre authentication. The usage of disable_pmksa_caching=1
prevents hostapd from adding PMKSA entries into its cache when a successful
802.1x authentication occurs. In practice RSN preauthentication would
trigger a STA to perform authentication with other APs on the same SSID,
it would then have its own supplicant PMKSA cache held. If a STA roams
between one AP to another no new authenitcation would need to be performed
as the new AP would already have authenticated the STA. The purpose of the
PMKSA cache on the AP side would be for the AP to use the same PMKID for
a STA when the STA roams off onto another BSSID and later comes back to it.
Disabling Opportunistic Key Caching could help the reported issue
as well but its not the correct place to address this. Opportunistic
Key Caching enables an AP with different interfaces to share the
PMKSA cache. Its a technical enhancement and disabling it would
be useful to let a testing suite properly test for RSN preauthentication
given that otherwise Opportunistic Key Caching would enable an
interface being tested to derive its own derive the PMKSA entry.
In production though okc=1 should be enabled to help with RSN
preauthentication.
The real fix for this particular issue outside of the scope of hostapd's
configuration and it should not be dealt with as a workaround to
its configuration and breaking expected RSN preauthentication and
technical optimizations. Revert this change and enable users to pick
and choose to enable or disable disable_pmksa_caching and okc expecting them
to instead have read clearly more what these do.
As for the core issure ported, the correct place to fix this is to
enable a sort of messaging between the RADIUS server and its peers
so that if caching for authentication is enabled that cache can be
cleared upon user credential updates. Updating a user password
(not just zapping a user) is another possible issue that would need
to be resolved here. Another part of the solution might be to reduce
the cache timing to account for any systematic limitations (RADIUS
server not able to ask peers to clear cache might be
one).
[0] https://dev.openwrt.org/changeset/33359
[1] https://forum.openwrt.org/viewtopic.php?id=19596
[2] http://wireless.kernel.org/en/users/Documentation/hostapd#IEEE_802.11i.2FRSN.2FWPA2_pre-authentication
[3] http://wireless.kernel.org/en/users/Documentation/wpa_supplicant#RSN_preauthentication
[4] http://wiki.openwrt.org/doc/recipes/rsn_preauthentication
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
SVN-Revision: 38336
Felix Fietkau [Tue, 8 Oct 2013 11:09:36 +0000 (11:09 +0000)]
hostapd: Add WPS unconfigured & WPS pin method support
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38335
Felix Fietkau [Tue, 8 Oct 2013 11:09:27 +0000 (11:09 +0000)]
hostapd: Add eap_reauth_period config option
This adds the eap_reauth_period to be used for modifying
the RADIUS server reauthentication authentication period,
a parameter that gets passed directly to the hostapd
configuration file.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
SVN-Revision: 38334
Hauke Mehrtens [Mon, 7 Oct 2013 22:16:17 +0000 (22:16 +0000)]
mac80211: wl12xx: build them again
WL_TI is bool but was set to =m, which deactivated it. Now it is set to
=y and should be activated in the config so the wl12xx driver gets
build.
This closes #14212.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38333
Hauke Mehrtens [Mon, 7 Oct 2013 21:49:28 +0000 (21:49 +0000)]
mac80211: brcmfmac: BRCMFMAC_USB was not set in config
Somehow BRCMFMAC_USB was not set in the build and brcmfmac.ko did not had usb support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38332
Luka Perkov [Mon, 7 Oct 2013 21:28:14 +0000 (21:28 +0000)]
openvpn: switch to new procd init script style
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38331
Luka Perkov [Mon, 7 Oct 2013 21:28:12 +0000 (21:28 +0000)]
polarssl: update to 1.2.9
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38330
John Crispin [Mon, 7 Oct 2013 20:13:32 +0000 (20:13 +0000)]
lantiq: fix ltq_ptm compile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38329
John Crispin [Mon, 7 Oct 2013 15:03:00 +0000 (15:03 +0000)]
lantiq: experia v8 fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38328
John Crispin [Mon, 7 Oct 2013 15:02:56 +0000 (15:02 +0000)]
lantiq: fix fritz3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38327
John Crispin [Mon, 7 Oct 2013 15:02:52 +0000 (15:02 +0000)]
lantiq: fix fritz image generation
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38326
John Crispin [Mon, 7 Oct 2013 15:02:48 +0000 (15:02 +0000)]
lantiq: fix eva partition split for squashfs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38325
John Crispin [Mon, 7 Oct 2013 15:02:44 +0000 (15:02 +0000)]
ralink: fix asiarf image generation
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38324
John Crispin [Mon, 7 Oct 2013 15:02:39 +0000 (15:02 +0000)]
ralink: split mt7530 driver out of the gsw driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38323
John Crispin [Mon, 7 Oct 2013 15:02:35 +0000 (15:02 +0000)]
ralink: build recovery images for dcs930 ip cam
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38322
John Crispin [Mon, 7 Oct 2013 15:02:31 +0000 (15:02 +0000)]
ralink: DIR610A1 Fix remaining issues
This patch fixes:
- Ethernet and Wireless LEDs
- Wireless MAC Address
- Remove whitespaces from dts file
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38321
John Crispin [Mon, 7 Oct 2013 15:02:27 +0000 (15:02 +0000)]
ralink: MT7620 eval board pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38320
John Crispin [Mon, 7 Oct 2013 15:02:23 +0000 (15:02 +0000)]
ralink: make cevt systick selectable via kconfig
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38319
John Crispin [Mon, 7 Oct 2013 15:02:18 +0000 (15:02 +0000)]
ralink: fix mt7620a pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38318
John Crispin [Mon, 7 Oct 2013 15:01:05 +0000 (15:01 +0000)]
tools: add tool to generate dcs93xl images
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38317
Steven Barth [Mon, 7 Oct 2013 08:43:33 +0000 (08:43 +0000)]
odhcp6c: improve server selection, introduce "forceprefix" option
SVN-Revision: 38314
Luka Perkov [Mon, 7 Oct 2013 08:26:41 +0000 (08:26 +0000)]
iproute2: update to 3.11
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38313
Hauke Mehrtens [Mon, 7 Oct 2013 00:01:01 +0000 (00:01 +0000)]
brcm47xx: Cocci spatch "noderef"
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
SVN-Revision: 38312
Hauke Mehrtens [Mon, 7 Oct 2013 00:00:10 +0000 (00:00 +0000)]
brcm47xx: move clock detection patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38311
Hauke Mehrtens [Sun, 6 Oct 2013 23:57:11 +0000 (23:57 +0000)]
brcm47xx: move and rename nvram gpio patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38310
projects / librecmc / librecmc.git / log