Have EVP_PKEY_asn1_find_str() work more like EVP_PKEY_asn1_find()

EVP_PKEY_asn1_find_str() would search through standard asn1 methods
first, then those added by the application, which EVP_PKEY_asn1_find()
worked the other way around.  Also, EVP_PKEY_asn1_find_str() didn't
handle aliases.

This change brings EVP_PKEY_asn1_find_str() closer to EVP_PKEY_asn1_find().

Fixes #5086

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5137)

(cherry picked from commit 3bf0c3fe31d5339524dae671064cc5fe9e4bda38)

Revert "EVP_PKEY_asn1_add0(): Check that this method isn't already registered"

This reverts commit d85722d31ac9ff0dc54c06cdc8d125acf56ca27a.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5137)

(cherry picked from commit 7203c94e98c9fa76b0859c25b723b2bde4a9059b)

Don't add $(EX_LIBS) to libssl.pc's Libs.private

Since libssl requires libcrypto and libcrypto.pc already has
Libs.private set exactly the same, there's no reason to repeat it in
libssl.pc.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5135)

Add anything specifying a threads library to ex_libs

Even -pthread gets treated that way.  The reason to do this is so it
ends up in 'Libs.private' in libcrypto.pc.

Fixes #3884

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5135)

Don't attempt to use X25519 for ECDSA in speed

Fixes #5090

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5097)

(cherry picked from commit da1a1b5ac417c4e38f7717082d69cb5f0ceda6b9)

Don't crash on a missing Subject in index.txt

An index.txt entry which has an empty Subject name field will cause ca
to crash. Therefore check it when we load it to make sure its not empty.

Fixes #5109

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5114)

(cherry picked from commit 1e05c6d07ff963107286d028f6778d2ccc863a9a)

Don't allow an empty Subject when creating a Certificate

Misconfiguration (e.g. an empty policy section in the config file) can
lead to an empty Subject. Since certificates should have unique Subjects
this should not be allowed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5114)

(cherry picked from commit e505f1e86874acfd98826d64c53bf2ddfd9c1399)

Add a configure option to opt-out secure memory

./config -DOPENSSL_NO_SECURE_MEMORY

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5113)

(cherry picked from commit 154d8c132fbe22a248f95e95ef21f1840451da62)

Update the license end year

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5121)

(cherry picked from commit 7c24f9d21cddd2bb30167153b05168fee7e3cf0b)

Enable TLSProxy tests on Windows

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5096)

Set OPENSSL_ENGINES for Windows

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5108)

(cherry picked from commit 7a6ce9039cb6690aae3cca01f18daab16b8e30d7)

Create one permanent proxy socket per TLSProxy::Proxy instance

On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.

To avoid this scenario, we don't create a new proxy port for each new
client run.  Instead, we create one proxy socket when the proxy object
is created, and close it when destroying that object.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5095)

(cherry picked from commit c7454e1af74b1b99f3f47f782a6ac484c4c55b7f)

Only implement secure malloc if _POSIX_VERSION allows

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit e44c7d02ddac975ec6abff7901e77a0c37f9949d)

The Cygwin gcc doesn't define _WIN32, don't pretend it does

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit 4d3c278c1a4f940e098edac6de3d370b94d1bb8b)

Simplify Cygwin checks, part 1

Because OPENSSL_SYS_CYGWIN will keep OPENSSL_SYS_UNIX defined, there's
no point having checks of this form:

    #if (defined(OPENSSL_SYS_UNIX) || defined(OPENSSL_SYS_CYGWIN))

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit 6ce66ce073b19af46fd94f4eefdb7c4772d7dd6f)

Cygwin is POSIX, don't say it isn't

More to the point, Cygwin is a POSIX API.  In our library, the use of
a POSIX API is marked by defining the macro OPENSSL_SYS_UNIX.
Therefore, that macro shouldn't be undefined when building for Cygwin.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit 33cebb9c0dd6115bc357b5097f7db82b64b10919)

TLSProxy::Proxy: Don't use ReuseAddr on Windows

On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.

An easy solution is not to use ReuseAddr on Windows.

Thanks Bernd Edlinger for the suggestion.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5103)

(cherry picked from commit e02d5886636095c26a8bff1bf8344bd0bba7ccff)

TLSProxy::Proxy: don't waste time redirecting STDOUT and STDERR

On Windows, it seems that doing so in a forked (pseudo-)process
sometimes affects the parent, and thereby hides all the results that
are supposed to be seen by the running test framework (the "ok" and
"not ok" lines).

It turns out that our redirection isn't necessary, as the test
framework seems to swallow it all in non-verbose mode anyway.
It's possible that we did need this at some point, but the framework
has undergone some refinement since then...

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5100)

(cherry picked from commit 825038d8c36075488922617e48fc4782afe871d1)

TLSProxy::Proxy:  If we don't support IPv6, force IPv4

We use the first we can of the following IO::Socket modules to create
sockets:

- IO::Socket::INET6
- IO::Socket::IP
- IO::Socket::INET

The last of them doesn't support IPv6, so if that's the one available,
we must force the s_client and s_server processes to use IPv4.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5092)

(cherry picked from commit c44bab084ed139b5e5c3f6b318bf1bf65e04cfa5)

Extend timeout for TLSProxy

I received this error from a TLSProxy test:

Failed to start up server (localhost,4443): Transport endpoint is not
connected

So, extend the timeout before we give up trying to connect to the server.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5088)

(cherry picked from commit 82992a4130e668c14ff66fca26170629b23c4556)

Revert BN_copy() flag copy semantics change

Commit 9f9442918a changed the semantics of BN_copy() to additionally
copy the BN_FLG_CONSTTIME flag if it is set. This turns out to be
ill advised as it has unintended consequences. For example calling
BN_mod_inverse_no_branch() can sometimes return a result with the flag
set and sometimes not as a result. This can lead to later failures if we
go down code branches that do not support constant time, but check for
the presence of the flag.

The original commit was made due to an issue in BN_MOD_CTX_set(). The
original PR fixed the problem in that function, but it was changed in
review to fix it in BN_copy() instead. The solution seems to be to revert
the BN_copy() change and go back to the originally proposed way.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5080)

(cherry picked from commit 7d461736f7bd3af3c2f266f8541034ecf6f41ed9)

Fix intermittent Windows and Cygwin failures in s_server

The same kind of failure that has already been observed on the
s_client can sometimes also be observed on s_server, so we need to add
the same kind of 50ms delay as was previously added on s_client.

Ref: git commit cb2e10f257a464c6b475b321dd9e4769df84dbf6:

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5079)

(cherry picked from commit d17bdfc26d87097c2c80854fd521b6ecebdf5ebb)

Fix intermittent Cygwin failures in s_client

This was identified for Windows almost two years ago for VC and
msys/mingw.  It seems that Cygwin suffers from the same issue, and
since Cygwin doesn't define OPENSSL_SYS_WINDOWS, we need to make a
special case to have a 50ms pause before closing the TLS connection.

Ref: git commit cb2e10f257a464c6b475b321dd9e4769df84dbf6

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5074)

(cherry picked from commit 27da42d85212f80fc0db02b1cedf1d49fbfb8c43)

Use constant value 1 instead of SHUT_WR in do_server

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5072)

(cherry picked from commit 803141f6100ca8d756928328a262e1dc52daef2d)

Explicitly shut the socket down in s_client

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5072)

(cherry picked from commit 26ec943e020c0db6a25e6d155ba318270eff0fd7)

Catch SIGPIPE in TLSProxy::Proxy::clientstart

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5071)

(cherry picked from commit 438e57a43f096d37bf316869b98780e24596a5e8)

Make data argument const in SSL_dane_tlsa_add

The data argument of SSL_dane_tlsa_add is used read-only, so it
should be const.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5056)

(cherry picked from commit a41a6120cdcb7e883481bc1bed55e7157c9255c4)

Tolerate DTLS alerts with an incorrect version number

In the case of a protocol version alert being sent by a peer the record
version number may not be what we are expecting. In DTLS records with an
unexpected version number are silently discarded. This probably isn't
appropriate for alerts, so we tolerate a mismatch in the minor version
number.

This resolves an issue reported on openssl-users where an OpenSSL server
chose DTLS1.0 but the client was DTLS1.2 only and sent a protocol_version
alert with a 1.2 record number. This was silently ignored by the server.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5018)

(cherry picked from commit 08455bc9b0e69ed5f25c16fc30cc2db57cdca842)

Configure: try to make sure every config target name is unique

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5047)

(cherry picked from commit 225f980d22dfe66aa3945c21609042c32284e61c)

Update copyright years on all files merged since Jan 1st 2018

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5039)

Various small build improvements on mkdef.pl, progs.pl

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4994)

(cherry picked from commit ab307dc645502d025c2760160062d5032da56bf7)

Document OPENSSL_ENGINES environment variable

In apps/engine.pod and crypto/ENGINE_add.pod

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4956)

(cherry picked from commit c81c38cb2786dd308256c55ce8d5337e6a3f14ce)

Fix spelling: adroideabi -> androideabi

CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5029)

(cherry picked from commit bebef673607b9701bc21a0f7b7dbf92434af2588)

Clean up uClinux targets

The uClinux targets included some attributes that would result in
circular references of CFLAGS and LDCLAGS.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5034)

(cherry picked from commit f720194cbc174806fe1ce9c349edd249d8076c02)

CHANGES: Document the removal of OS390-Unix

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5031)

(cherry picked from commit 4b9e91b02bee0dd114260513cb6a3f28261124b7)

Add fingerprint text, remove MD5

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4906)
(Cherry-picked from commit 9422d45de2b70cabec5f6e6a5c812e0647e6d3ab)

Corrected 'cms' exit status when key or certificate cannot be opened

A backport of #4997.
Fixes #4996.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5021)

Stop using unimplemented cipher classes.
Add comments to no longer usable ciphers.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5023)

(cherry picked from commit 643d91fea409b0f010ce990f8f0fac234ae058bc)

Add x509(1) reference

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove old config that used non-exist util script

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5016)

(cherry picked from commit b44a65512a4a0a299f8f817b63df472e74a0007a)

ec/ecp_nistp*.c: sanitize for undefined/implmentation-specific behaviour.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4974)

(cherry picked from commit 8af7e94d7b720224547efa7e3364857f7f666dd4)

Add comments to NULL func ptrs in bio_method_st

This commit adds comments to bio_method_st definitions where the
function pointers are defined as NULL. Most of the structs have comments
but some where missing and not all consitent.

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4881)

(cherry picked from commit b4ff66223b53ad9d2f5b4efd75bf8d52cc59c8dd)

Fix invalid function type casts.
Rename bio_info_cb to BIO_info_cb.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4943)

Fix a gcc fallthru warning

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4941)

Remove test-runs dir

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4942)

Document the X509_V_FLAG_PARTIAL_CHAIN flag

Also improved documentation of TRUSTED_FIRST

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix more OCSP_resp_get0_signer() nits

Fix a typo for "retrieve" and some indentation.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(cherry picked from commit eb48052ec96a7551391b5955f03f5ef70b3528f6)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

Wrap more of ocspapitest.c in OPENSSL_NO_OCSP

make_dummy_resp() uses OCSP types, and get_cert_and_key() is unused
once make_dummy_resp() is compiled out, so neither can be included
in the build when OCSP is disabled and strict warnings are active.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit cb091295a9ff16f4de1a8b00be444d40ac068d04)

(Merged from https://github.com/openssl/openssl/pull/4723)

Fix coverity-reported errors in ocspapitest

Avoid memory leaks in error paths, and correctly apply
parentheses to function calls in a long if-chain.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b6306d8049b04dca7fa738a86c892c43ba6a5fc4)

(Merged from https://github.com/openssl/openssl/pull/4723)

Fix typo that cause find-doc-nits failure

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(cherry picked from commit b741fcd2ddc4e94faee75a47c241fa136854c81f)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit f1d3de718bc96e70ce76bf2b4ccee128ecbcd100)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

Add OCSP API test executable

Some of the OCSP APIs (such as the recently added OCSP_resp_get0_signer)
do not really merit inclusion in the ocsp(1) utility, but we should still
have unit tests for them.

For now, only test OCSP_resp_get0_signer(), but it should be easy to
add more tests in the future.

Provide an X509 cert and private key in the test's data directory
to use for signing responses, since constructing those on the fly
is more effort than is needed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 27da13430bfb3c178716cec10e8d5d6134e54f90)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

Add an API to get the signer of an OCSP response

Add a new function OCSP_resp_get0_signer() that looks in the
certs bundled with the response as well as in additional certificates
provided as a function argument, returning the certificate that signed
the given response (if present).

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ce5886dda80b6f60fb30762381506d5c6f2d995c)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

crypto/bio/bss_dgram.c: annotate fallthrough (-Wimplicit-fallthrough)

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4916)

(cherry picked from commit 147167548bb692dc1b772cf4ee1d0917e45b1aff)

Fix leak in ERR_get_state() when OPENSSL_init_crypto() isn't called yet

If OPENSSL_init_crypto() hasn't been called yet when ERR_get_state()
is called, it need to be called early, so the base initialization is
done.  On some platforms (those who support DSO functionality and
don't define OPENSSL_USE_NODELETE), that includes a call of
ERR_set_mark(), which calls this function again.
Furthermore, we know that ossl_init_thread_start(), which is called
later in ERR_get_state(), calls OPENSSL_init_crypto(0, NULL), except
that's too late.
Here's what happens without an early call of OPENSSL_init_crypto():

    => ERR_get_state():
         => CRYPTO_THREAD_get_local():
         <= NULL;
         # no state is found, so it gets allocated.
         => ossl_init_thread_start():
              => OPENSSL_init_crypto():
                   # Here, base_inited is set to 1
                   # before ERR_set_mark() call
                   => ERR_set_mark():
                        => ERR_get_state():
                             => CRYPTO_THREAD_get_local():
                             <= NULL;
                             # no state is found, so it gets allocated!!!!!
                             => ossl_init_thread_start():
                                  => OPENSSL_init_crypto():
                                       # base_inited is 1,
                                       # so no more init to be done
                                  <= 1
                             <=
                             => CRYPTO_thread_set_local():
                             <=
                        <=
                   <=
              <= 1
         <=
         => CRYPTO_thread_set_local()      # previous value removed!
    <=

Result: double allocation, and we have a leak.

By calling the base OPENSSL_init_crypto() early, we get this instead:

    => ERR_get_state():
         => OPENSSL_init_crypto():
              # Here, base_inited is set to 1
              # before ERR_set_mark() call
              => ERR_set_mark():
                   => ERR_get_state():
                        => OPENSSL_init_crypto():
                             # base_inited is 1,
                             # so no more init to be done
                        <= 1
                        => CRYPTO_THREAD_get_local():
                        <= NULL;
                        # no state is found, so it gets allocated
                        # let's assume we got 0xDEADBEEF
                        => ossl_init_thread_start():
                             => OPENSSL_init_crypto():
                                  # base_inited is 1,
                                  # so no more init to be done
                             <= 1
                        <= 1
                        => CRYPTO_thread_set_local():
                        <=
                   <=
              <=
         <= 1
         => CRYPTO_THREAD_get_local():
         <= 0xDEADBEEF
    <= 0xDEADBEEF

Result: no leak.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4913)

(cherry picked from commit aef84bb4efbddfd95d042f3f5f1d362ed7d4faeb)

Fix typo in comment

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4903)

Fix a switch statement fallthrough

SSL_trace() has a case which was inadvertently falling through.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4888)

Useless conf != NULL test

check is already made 10 line above.
clean commented code

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4885)

(cherry picked from commit df364297495e1d7409f1fcb0f4432c8671019cd8)

Make BIO_METHOD struct definitions consistent

I noticed that some of the BIO_METHOD structs are placing the name on
the same line as the type and some don't. This commit places the name
on a separate line for consistency (which looks like what the majority
do)

CLA: trivial

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4878)

(cherry picked from commit 27ab91951c96364351f1ea0652dbf14622440345)

Standardize syntax of sizeof(foo)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4876)

Correct minor typo in ssl_locl.h comment

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4880)

(cherry picked from commit 6aff543b9bf14bdac7f5385a9e56b8785b30f6d8)

Fix an incoherent test.

Pointer 'o' is set inside a local buffer, so it can't be NULL.
Also fix coding style and add comments

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4754)
(cherry picked from commit cef115ff0ca4255d3decc1dda87c5418a961fd2c)

In apps_startup(), call OPENSSL_init_ssl() rather than OPENSSL_init_crypto()

Otherwise, any command that relies on ssl modules may fail, because
SSL_add_ssl_module() will be called after the config file has already
been loaded.

Fixes #4788

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)

(cherry picked from commit 0488c0bbbe87eee3a800797b91350c653e9f1711)

In OPENSSL_init_ssl(), run the base ssl init before OPENSSL_init_crypto()

IF OPENSSL_init_ssl() is called with the option flag
OPENSSL_INIT_LOAD_CONFIG, any SSL config will be handled wrongly
(i.e. there will be an attempt to load libssl_conf.so or whatever
corresponds to that on non-Unix platforms).  Therefore, at least
SSL_add_ssl_module() MUST be called before OPENSSL_init_crypto() is
called.  The base ssl init does that, plus adds all kinds of ciphers
and digests, which is harmless.

Fixes #4788

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)

(cherry picked from commit 0a90a6831e02e00d9043ada635421cfd3da5ffe2)

Remove unicode characters from source

Some compilers react badly to non-ASCII characters

Fixes #4877

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4879)

(cherry picked from commit d68a0eaf45f12392065f3cf716a1a2682d55d3ce)

Fix the buffer sizing in the fatalerrtest

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4868)

Update CHANGES and NEWS for the new release

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test for CVE-2017-3737

Test reading/writing to an SSL object after a fatal error has been
detected. This CVE only affected 1.0.2, but we should add it to other
branches for completeness.

Reviewed-by: Rich Salz <rsalz@openssl.org>

bn/asm/rsaz-avx2.pl: fix digit correction bug in rsaz_1024_mul_avx2.

Credit to OSS-Fuzz for finding this.

CVE-2017-3738

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update eng_fat.c

This line will allow use private keys, which created by Crypto Pro, to
sign with OpenSSL.

CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4836)

(cherry picked from commit b35bb37a3d6ecf11b43ef8717600ab61718c3cc2)

Adjusted Argument Indices
CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4835)

(cherry picked from commit 1e2804f25c80136c33f3508adb54b24106b6b6f6)

Make possible variant SONAMEs and symbol versions

This small change in the Unix template and shared library build
scripts enables building "variant" shared libraries.  A "variant"
shared library has a non-default SONAME, and non default symbol
versions.  This makes it possible to build (say) an OpenSSL 1.1.0
library that can coexist without conflict in the same process address
space as the system's default OpenSSL library which may be OpenSSL
1.0.2.

Such "variant" shared libraries make it possible to link applications
against a custom OpenSSL library installed in /opt/openssl/1.1 or
similar location, and not risk conflict with an indirectly loaded
OpenSSL runtime that is required by some other dependency.

Variant shared libraries have been fully tested under Linux, and
build successfully on MacOS/X producing variant DYLD names.  MacOS/X
Darwin has no symbol versioning, but has a non-flat library namespace.
Variant libraries may therefore support multiple OpenSSL libraries
in the same address space also with MacOS/X, despite lack of symbol
versions, but this has not been verified.

Variant shared libraries are optional and off by default.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix docs for EVP_EncryptUpdate and EVP_DecryptUpdate

Fixes #4775

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4815)

Check for malloc failure

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4805)

(cherry picked from commit 378db52bb0177ae03cac3c3ba194bb6dec34a2d7)

Pretty-print large INTEGERs and ENUMERATEDs in hex.

This avoids taking quadratic time to pretty-print certificates with
excessively large integer fields. Very large integers aren't any more
readable in decimal than hexadecimal anyway, and the i2s_* functions
will parse either form.

Found by libFuzzer.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4790)

(cherry picked from commit 10a3195fcf7d04ba519651cf12e945a8fe470a3c)

Fix EVP_MD_meth_new.pod

A name too many in the NAME section, and a copyright year update

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4789)

(cherry picked from commit 92793648945affdfe529fa711666d19528815789)

Correct EVP_CIPHER_meth_new.pod and EVP_MD_meth_new.pod

One had some lines copied from the other, and both were missing a
proper RETURN VALUES section.

Fixes #4781

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4787)

(cherry picked from commit 51e47d5f6a7944c3e3ddc5f6d376fc1320639277)

Avoid unnecessary MSYS2 conversion of some arguments

Fixes #4740

The MSYS2 run-time convert arguments that look like paths when
executing a program unless that application is linked with the MSYS
run-time. The exact conversion rules are listed here:

    http://www.mingw.org/wiki/Posix_path_conversion

With the built-in configurations (all having names starting with
"mingw"), the openssl application is not linked with the MSYS2
run-time, and therefore, it will receive possibly converted arguments
from the process that executes it. This conversion is fine for normal
path arguments, but it happens that some arguments to the openssl
application get converted when they shouldn't. In one case, it's
arguments like '-passin file:something', and in another, it's a file:
URI (what typically happens is that URIs without an authority
component get converted, 'cause the conversion mechanism doesn't
recognise them as URIs).

To avoid conversion where we don't want it, we simply assign
MSYS2_ARG_CONV_EXCL a pattern to avoid specific conversions. As a
precaution, we only do this where we obviously need it.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4766)

bn/bn_add.c: address performance regression.

Performance regression was reported for EC key generation between
1.0.2 and 1.1.x [in GH#2891]. It naturally depends on platform,
values between 6 and 9% were observed.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4743)

(cherry picked from commit a78324d95bd4568ce2c3b34bfa1d6f14cddf92ef)

asn1/a_strex.c: fix flags truncation in do_esc_char.

|flags| argument to do_esc_char  was apparently truncated by implicit
cast. [Caught by VC warning subsytem.]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)

(cherry picked from commit 372463103917fcc2b68bd2ba3db55b29ce325705)

lhash.c: Replace Unicode EN DASH with the ASCII char '-'.

 * addressing", Proc. 6th Conference on Very Large Databases: 212–223
                                                                 ^
The EN DASH ('–') in this line is one UTF-8 character (hex: e2 80 93).
Under some code page setting (e.g. 936), Visual Studio may report C4819
warning: The file contains a character that cannot be represented in the
current code page.

Replace this character with the ASCII char '-' (Hex Code: 2D).

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4691)

(cherry picked from commit b4d0fa49d9d1a43792e58b0c8066bb23b9e53ef4)

Fix possible leaks on sk_X509_EXTENSION_push() failure ...

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4677)

(cherry picked from commit 1687aa760cdd164b12c5b70e65cadcbce1e7ccfa)

util/copy.pl: work around glob quirk in some of earlier 5.1x Perl versions.

In earlier 5.1x Perl versions quoting globs works only if there is
white space. If there is none, it's looking for names starting with ".

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4695)

(cherry picked from commit 1097d2a39e3f85d4dac2c4d1c238792d6e1d959f)

Configurations/unix-Makefile.tmpl: fix HP-UX build.

HP-UX make doesn't recognize $< in explict target rules, only in
inference ones such as .c.o.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4697)

(cherry picked from commit b6705d4893d1566c3a5427e387ce99344497758d)

rc4/build.info: fix HP-UX rc4-ia64 rule.

HP-UX make doesn't recognize $< in explict target rules, only in
inference ones such as .c.o.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4694)

Configure: cleanup @disable_cascade

'rsa', 'sha' and 'tlsext' can't be disabled, not even as a consequence
of other conditions, so having cascading disables that depend on them
is futile.  Clean up!

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4693)

(cherry picked from commit 89635075d84353fc0c3d44a82fd0903ccd4ab24a)

Mark a zero length record as read

If SSL_read() is called with a zero length buffer, and we read a zero length
record then we should mark that record as read.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4686)

Fix race condition in TLSProxy

Normally TLSProxy waits for the s_server process to finish before
continuing. However in cases where serverconnects > 1 we need to keep the
s_server process around for a later test so we continue immediately. This
means that TAP test output can end up being printed to stdout at the same
time as s_server is printing stuff. This confuses the test runner and can
cause spurious test failures. This commit introduces a small delay in cases
where serverconnects > 1 in order to give s_server enough time to finish
what it was doing before we continue to the next test.

Fixes #4129

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4661)

Remove 4 broken macros from ocsp.h

There were 4 macros in ocsp.h that have not worked since 1.1.0 because
they attempt to access the internals of an opaque structure.

For OCSP_REQUEST_sign() applications should use OCSP_request_sign() instead.
For OCSP_BASICRESP_sign() applications should use OCSP_basic_sign() instead.
For OCSP_REQUEST_verify() applications should use OCSP_request_verify()
instead.
For OCSP_BASICRESP_verify() applications should use OCSP_basic_verify()
instead.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4635)

(cherry picked from commit 9f5671c7e9f30dfa53b1a2b553f234c2761ceb66)

Consolidate the locations where we have our internal perl modules

Instead of having perl modules under test/testlib and util,
consolidate them all to be inside util/perl.

(this is an adaptation of the part of #4069 that wasn't included in #4666)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4667)

Perl: Use our own globbing wrapper rather than File::Glob::glob

File::Glob::glob is deprecated, it's use generates this kind of
message:

    File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277.

The first idea was to use a construction that makes the caller glob()
use File::Glob::bsd_glob().  That turned out not to work well
everywhere, so instead, we make our own wrapper, OpenSSL::Glob and use
that.

Fixes #4636

(this is an adaptation of #4040 and part of #4069, for 1.1.0)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4666)

aes/asm/{aes-armv4|bsaes-armv7}.pl: make it work with binutils-2.29.

It's not clear if it's a feature or bug, but binutils-2.29[.1]
interprets 'adr' instruction with Thumb2 code reference differently,
in a way that affects calculation of addresses of constants' tables.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4669)

(cherry picked from commit b82acc3c1a7f304c9df31841753a0fa76b5b3cda)

Spelling doc #3580
Duplicated tests descriptions

Backport of #3580 to 1.1.0
plus a few other typo fixes found at fligth.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4645)

Add error handling in dsa_main and ASN1_i2d_bio.

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4600)

(cherry picked from commit a6f622bc99ffdc7b34199babb9d200b24a7a6431)

Check return value of OBJ_nid2obj in dsa_pub_encode.

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4600)

(cherry picked from commit 7760384b403a61824c43cc767a11cd22abfa9e49)

Travis: if "make update" created a diff, please show it

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4652)

(cherry picked from commit d7948767556e68378b75196841b3d32dd70d169a)

Prepare for 1.1.0h-dev

Reviewed-by: Andy Polyakov <appro@openssl.org>

Prepare for 1.1.0g release

Reviewed-by: Andy Polyakov <appro@openssl.org>

Update CHANGES and NEWS for new release

Reviewed-by: Andy Polyakov <appro@openssl.org>

bn/asm/x86_64-mont5.pl: fix carry bug in bn_sqrx8x_internal.

Credit to OSS-Fuzz for finding this.

CVE-2017-3736

Reviewed-by: Rich Salz <rsalz@openssl.org>