RT3757: base64 encoding bugs

Rewrite EVP_DecodeUpdate.

In particular: reject extra trailing padding, and padding in the middle
of the content. Don't limit line length. Add tests.

Previously, the behaviour was ill-defined, and depended on the position
of the padding within the input.

In addition, this appears to fix a possible two-byte oob read.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit 3cdd1e94b1d71f2ce3002738f9506da91fe2af45)

Fix return values when adding serverinfo fails.

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1128

(cherry picked from commit fae11ec714ac8e71d95e824d7102ab5b2ec2e256)

Make no-psk compile without warnings.

PR#4035

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

RT4044: Remove .cvsignore files.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 83fcd322f7b398534fba7816ca3c0896f529c7c0)

RT4044: Remove .cvsignore files.

Reviewed-by: Matt Caswell <matt@openssl.org>

d2i: don't update input pointer on failure

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
MR #1005
(cherry picked from commit a46c9789ce2aecedceef119e9883513c7a49f1ca)

Constify ECDSA_METHOD_new.

PR#3920.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit aabd49232025807babe995006a46c4c7815ce868)

Check for FIPS mode after loading config.

PR#3958

Reviewed-by: Rich Salz <rsalz@openssl.org>

Use memmove instead of memcpy.

PR#4036

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Use default field separator.

If the field separator isn't specified through -nameopt then use
XN_FLAG_SEP_CPLUS_SPC instead of printing nothing and returing an error.

PR#2397

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 03706afa30aeb4407287171a9d6f9a765395d0a2)

RT3754: check for NULL pointer

Fix both the caller to error out on malloc failure, as well as the
eventual callee to handle a NULL gracefully.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Remove bogus CHANGES entries

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Match SUITEB strings at start of cipher list.

PR#4009.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 13e228d6845aff7e454eea7c9ddd392ebfbd2868)

Conflicts:
ssl/ssl_ciph.c

Add initial Travis CI configuration

Closes #63

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
(cherry picked from commit 66c103bdaba21749555c8073a3f20b7741fa5869)

Cleaner handling of "cnid" in do_x509_check

Avoid using cnid = 0, use NID_undef instead, and return early instead
of trying to find an instance of that in the subject DN.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fffc2faeb2b5cad4516cc624352d445284aa7522)

Better handling of verify param id peername field

Initialize pointers in param id by the book (explicit NULL assignment,
rather than just memset 0).

In x509_verify_param_zero() set peername to NULL after freeing it.

In x509_vfy.c's internal check_hosts(), avoid potential leak of
possibly already non-NULL peername.  This is only set when a check
succeeds, so don't need to do this repeatedly in the loop.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit a0724ef1c9b9e2090bdd96b784f492b6a3952957)

RT3767: openssl_button.gif should be PNG

No, we should just delete it.  And updated the README

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 8db78781069697cfa30a2261413f33f5055a2838)

Fix DTLS1.2 compression

Backport of equivalent fix from master. The only compression
method is stateful and hence incompatible with DTLS. The DTLS
test was not working for DTLS1.2

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix DTLS1.2 buffers

Fix the setup of DTLS1.2 buffers to take account of the Header

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix session resumption

Commit f0348c842e7 introduced a problem with session resumption. The
version for the session is fixed when the session is created. By moving
the creation of the session earlier in the process the version is fixed
*before* version negotiation has completed when processing the ServerHello
on the client side. This fix updates the session version after version neg
has completed.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Fix building with OPENSSL_NO_TLSEXT.

Builds using no-tlsext in 1.0.0 and 0.9.8 are broken. This commit fixes the
issue. The same commit is applied to 1.0.1 and 1.0.2 branches for code
consistency. However this commit will not fix no-tlsext in those branches
which have always been broken for other reasons. The commit is not applied
to master at all, because no-tlsext has been completely removed from that
branch.

Based on a patch by Marc Branchaud <marcnarc@xiplink.com>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Fix the comment for POINT_CONVERSION_UNCOMPRESSED

The |z| value should be 0x04 not 0x02

RT#3838

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 91d2728b38b1df930f337e163816a0fc9580b6a6)

Add missing CHANGES entry for 1.0.2

Reviewed-by: Rich Salz <rsalz@openssl.org>

RT4002: check for NULL cipher in p12_crpt.c

The NULL cipher case can't actually happen because we have no
EVP_PBE_CTL combinations where cipher_nid is -1 and keygen is
PKCS12_PBE_keyivgen. But make the code more obviously correct.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 394f7b6fcc38132b8ccff0a3253b9dd15640cfc0)

RT 3493: fix RSA test

- Pass in the right ciphertext length to ensure we're indeed testing
  ciphertext corruption (and not truncation).
- Only test one mutation per byte to not make the test too slow.
- Add a separate test for truncated ciphertexts.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 25d6b3401ca40c9a2cbe5080449c1c2a37037777)

Ignore .dir-locals.el

Because we recently encourage people to have a .dir-locals.el, it's a good
idea to ignore it on a git level.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d7c02691a5e6f2716759eacb6f48c39f15ee57c8)

check bn_new return value

Slightly modified from the original PR.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit a7e974c7be90e2c9673e2ce6215a70f734eb8ad4)

GH367 follow-up, for more clarity

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 36ac7bc8a9c856bcdff6eecdaca128ccc5430a1e)

BN_mod_exp_mont_consttime: check for zero modulus.

Don't dereference |d| when |top| is zero. Also test that various BIGNUM methods behave correctly on zero/even inputs.

Follow-up to b11980d79a52ec08844f08bea0e66c04b691840b

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove auto-fill-mode

Apparently, emacs sees changes to auto-fill-mode as insecure

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6dc08048d93ff35de882878f190ae49aa698b5d2)

Add an example .dir-locals.el

This file, when copied to .dir-locals.el in the OpenSSL source top,
will make sure that the CC mode style "OpenSSL-II" will be used for
all C files.

Additionally, I makes sure that tabs are never used as indentation
character, regardless of the emacs mode, and that the fill column is
78.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0927f0d822b1e0f55cb7d8bacf9004ad3495514b)

Add emacs CC mode style for OpenSSL

This hopefully conforms closely enough to the current code style.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d9b3554b2d9724bc2d1621a026ddaf0223e2d191)

bntest: don't dereference the |d| array for a zero BIGNUM.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 4d04226c2ec7e7f69f6234def63631648e35e828)

Remove the "times" directory.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 9db0c91c39fb548c36d6c3c944f50d4c068eefb7)

GH354: Memory leak fixes

Fix more potential leaks in X509_verify_cert()
Fix memory leak in ClientHello test
Fix memory leak in gost2814789 test
Fix potential memory leak in PKCS7_verify()
Fix potential memory leaks in X509_add1_reject_object()
Refactor to use "goto err" in cleanup.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 55500ea7c46c27a150a46832e1260891aaad8e52)

GH367: Fix dsa keygen for too-short seed

If the seed value for dsa key generation is too short (< qsize),
return an error. Also update the documentation.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit f00a10b89734e84fe80f98ad9e2e77b557c701ae)

GH351: -help text for some s_client/s_server flags

add -help descriptions of -curves, -sigalgs, -client_sigalgs
to s_client and s_server

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Fixed problem with multiple load-unload of comp zlib

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 8cbb153357896c4b224e0678550944f7851bc3b2)

GH correct organizationalUnitName

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 208b2d541dcb3b8f62639d2a8cc5771af4ba8755)

GH371: Print debug info for ALPN extension

Also known as RT 4106
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b48357d9953decc43333979ca11ebc1500040f4e)

Fix DTLS session ticket renewal

A DTLS client will abort a handshake if the server attempts to renew the
session ticket. This is caused by a state machine discrepancy between DTLS
and TLS discovered during the state machine rewrite work.

The bug can be demonstrated as follows:

Start a DTLS s_server instance:
openssl s_server -dtls

Start a client and obtain a session but no ticket:
openssl s_client -dtls -sess_out session.pem -no_ticket

Now start a client reusing the session, but allow a ticket:
openssl s_client -dtls -sess_in session.pem

The client will abort the handshake.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ee4ffd6fccd169775ba74afb1dbfecff48ee413d)

Conflicts:
ssl/d1_clnt.c

RT4019: Duplicate -hmac flag in dgst.pod

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 86de216da3ebea7f876a096e258cf4c9d219bc0a)

GH372: Remove duplicate flags

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 32c5e0ba0f9097e9c788ed8402fcbf6646cd2c2d)

Add new types to indent.pro

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 3da9505dc02b0594633c73a11343f54bb5dbf536)

GH345: Remove stderr output

Manually-cherry-picked since master varied a lot.
Reviewed-by: Tim Hudson <tjh@openssl.org>

Move FAQ to the web.

Best hope of keeping current.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 4f46473a86c9e3741203b22d4d401a3763583494)

Update docs.

Clarify and update documention for extra chain certificates.

PR#3878.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2fd7fb99dba9f56fbcb7ee1686bef30c7aef4754)

Documentation for SSL_check_chain()

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 6d5f8265ce6c4a8ed528462f519d9e8f2b7cfafd)

Fix 1.0.2 build break

Reviewed-by: Matt Caswell <matt@openssl.org>

GH364: Free memory on an error path

Part of RT 3997
Per Ben, just jump to common exit code.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit cc2829e6641092abed8360433dbe67e883fd1cc6)

Return error for unsupported modes.

PR#3974
PR#3975

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix memory leak if setup fails.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 891eac4604b5f05413e59602fae1f11136f4719a)

Conflicts:
crypto/cms/cms_enc.c

Err isn't always malloc failure.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a187e08d856690b5c1da3184d0ff560d572f893b)

Conflicts:
crypto/cms/cms_smime.c

Fix "make test" seg fault with SCTP enabled

When config'd with "sctp" running "make test" causes a seg fault. This is
actually due to the way ssltest works - it dives under the covers and frees
up BIOs manually and so some BIOs are NULL when the SCTP code does not
expect it. The simplest fix is just to add some sanity checks to make sure
the BIOs aren't NULL before we use them.

This problem occurs in master and 1.0.2. The fix has also been applied to
1.0.1 to keep the code in sync.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit f75d5171be0b3b5419c8974133e1573cf976a8bb)

Fix missing return value checks in SCTP

There are some missing return value checks in the SCTP code. In master this
was causing a compilation failure when config'd with
"--strict-warnings sctp".

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d8e8590ed90eba6ef651d09d77befb14f980de2c)

Check for 0 modulus in BN_MONT_CTX_set

The function BN_MONT_CTX_set was assuming that the modulus was non-zero
and therefore that |mod->top| > 0. In an error situation that may not be
the case and could cause a seg fault.

This is a follow on from CVE-2015-1794.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix seg fault with 0 p val in SKE

If a client receives a ServerKeyExchange for an anon DH ciphersuite with the
value of p set to 0 then a seg fault can occur. This commits adds a test to
reject p, g and pub key parameters that have a 0 value (in accordance with
RFC 5246)

The security vulnerability only affects master and 1.0.2, but the fix is
additionally applied to 1.0.1 for additional confidence.

CVE-2015-1794

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

RT3998: fix X509_check_host.pod release to 1.0.2

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Ben Laurie <ben@openssl.org>
(cherry picked from commit 2bfbeb264573342bea475f6dbb5b4c7fec8fdb0a)

RT3990: Fix #include path.

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1125245997dac232a0c0867b6c858cda4e549c6d)

Fix warning when compiling with no-ec2m

EC_KEY_set_public_key_affine_coordinates was using some variables that only
apply if OPENSSL_NO_EC2M is not defined.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit 8d11b7c7ee84ad0aa243476088285d15b22c5470)

GH336: Return an exit code if report fails

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e36ce2d986a5edbd33d6d176fb95c8046fae9725)

Clear BN-mont values when free'ing it.

From a CloudFlare patch.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Various doc fixes from GH pull requests

Thanks, folks!
        348 Benjamin Kaduk
        317 Christian Brueffer
        254 Erik Tews
        253 Erik Tews
        219 Carl Mehner
        155 (ghost)
        95 mancha
        51 DominikNeubauer

(Manually picked from 59c554b36e39256ac2cfc34dca052453e10c6d9c)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

RT3959: Fix misleading comment

Manual cherry-pick from main branch, since the header file
moved in master.
Reviewed-by: Matt Caswell <matt@openssl.org>

use X9.31 keygen by default in FIPS mode

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix write failure handling in DTLS1.2

The DTLS code is supposed to drop packets if we try to write them out but
the underlying BIO write buffers are full. ssl3_write_pending() contains
an incorrect test for DTLS that controls this. The test only checks for
DTLS1 so DTLS1.2 does not correctly clear the internal OpenSSL buffer which
can later cause an assert to be hit. This commit changes the test to cover
all DTLS versions.

RT#3967

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 5e8b24dbfb98ed7c5b355cb6a959906a418e264b)

RT3774: double-free in DSA

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit fa4629b6a2518d202fd051f228c3d8770682b3be)

Tweak README about rt and bug reporting.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 932af1617e277904bcca6e47729a420bba39785b)

Fix SSL_set_session_ticket_ext when used with SSLv23_method

The function SSL_set_session_ticket_ext can be used to set custom session
ticket data passed in the initial ClientHello. This can be particularly
useful for EAP-FAST. However, when using SSLv23_method, the session does
not get created until the ServerHello has been received. The extension code
will only add the SessionTicket data to the ClientHello if a session already
exists. Therefore SSL_set_session_ticket_ext has no impact when used in
conjunction with SSLv23_method. The solution is to simply create the session
during creation of the ClientHello instead of waiting for the ServerHello.

This commit fixes the test failure introduced by the previous commit.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Add test for SSL_set_session_ticket_ext

The function SSL_set_session_ticket_ext sets the ticket data to be sent in
the ClientHello. This is useful for EAP-FAST. This commit adds a test to
ensure that when this function is called the expected ticket data actually
appears in the ClientHello.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

rsaz_exp.h: align license with the rest of the contribution

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f4ee22be03bb8318b1e0f00e116be231ba12fdef)

Fix author credit for e5c0bc6

Reviewed-by: Richard Levitte <levitte@openssl.org>

Revert "Missing perldoc markup around < literal"

This reverts commit e5c0bc6cc49a23b50a272801c4bd53639c25fca4.
Reviewed-by: Richard Levitte <levitte@openssl.org>

GH322: Fix typo in generated comment.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit ad282e638b6824325fb83ecf7cde2e7996f52b79)

Missing perldoc markup around < literal

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e5c0bc6cc49a23b50a272801c4bd53639c25fca4)

Conversion to UTF-8 where needed

This leaves behind files with names ending with '.iso-8859-1'.  These
should be safe to remove.  If something went wrong when re-encoding,
there will be some files with names ending with '.utf8' left behind.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Small script to re-encode files that need it to UTF-8

This requires 'iconv' and that 'file' can take the options '-b' and '-i'.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f608b4064d58ca4dfdfdfc921308b51cb96205e2)

Remove extra '; \' in apps/Makefile

Fixes GH#330

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit eeb97bce751296b2e04a92d00c0d0a792ba61834)

Conflicts:
apps/Makefile

Set numeric IDs for tar as well

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit da24e6f8a05ea657684094e04c1a54efa04c2962)

Stop using tardy

Instead of piping through tardy, and possibly suffering from bugs in certain
versions, use --transform, --owner and --group directly with GNU tar (we
already expect that tar variant).

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 27f98436b9a84b94fbdd8e32960504634ae44cc0)

Conflicts:
Makefile.org

correct example

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2fc52c912a79eefe8610984bac5eed3a2589ee85)

Exit on error in ecparam

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 99dcd88035330d59ab40b5bc0f551aca7020cd30)

Sort @sstacklst correctly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Prepare for 1.0.2e-dev

Reviewed-by: Stephen Henson <steve@openssl.org>

Prepare for 1.0.2d release

Reviewed-by: Stephen Henson <steve@openssl.org>

Update CHANGES and NEWS for the new release

Reviewed-by: Stephen Henson <steve@openssl.org>

Add documentation for some missing verify options

Fills in a couple of verify options that were lacking documentation.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 79a55b1f2796bf6471360e8b6ab131cdedca256e)

Conflicts:
doc/apps/verify.pod

Reject calls to X509_verify_cert that have not been reinitialised

The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of ctx->untrusted. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase  where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.

With regards to the second of these, we should discount this - it should
not be supported to allow this.

With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.

Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation. This is a follow up commit to CVE-2015-1793.

Reviewed-by: Stephen Henson <steve@openssl.org>

Add test for CVE-2015-1793

This adds a test for CVE-2015-1793. This adds a new test file
verify_extra_test.c, which could form the basis for additional
verification tests.

Reviewed-by: Stephen Henson <steve@openssl.org>

Fix alternate chains certificate forgery issue

During certificate verfification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
bypassed, such as the CA flag, enabling them to use a valid leaf
certificate to act as a CA and "issue" an invalid certificate.

This occurs where at least one cert is added to the first chain from the
trust store, but that chain still ends up being untrusted. In that case
ctx->last_untrusted is decremented in error.

Patch provided by the BoringSSL project.

CVE-2015-1793

Reviewed-by: Stephen Henson <steve@openssl.org>

Relax CCM tag check.

In CCM mode don't require a tag before initialising decrypt: this allows
the tag length to be set without requiring the tag.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 9cca7be11d62298b2af0722f94345012c86eaed4)

document -2 return value

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 5727582cf51e98e5e0faa435e7da2c8929533c0d)

Fix PSK handling.

The PSK identity hint should be stored in the SSL_SESSION structure
and not in the parent context (which will overwrite values used
by other SSL structures with the same SSL_CTX).

Use BUF_strndup when copying identity as it may not be null terminated.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Check for errors with SRP

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 5fced2395ddfb603a50fd1bd87411e603a59dc6f)

Don't output bogus errors in PKCS12_parse

PR#3923

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ffbf304d4832bd51bb0618f8ca5b7c26647ee664)

Add docs for ssl verification parameter functions.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 77672802a665b26a44524a7a8091e56ee84bdf39)

GH297: Fix NAME section of SSL_CTX_use_serverinfo.pod

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>

RT3682: Avoid double-free on OCSP parse error

Found by Kurt Cancemi

(Manual cherry-pick of f8e427154bbc0c33f29fa7aad001b1b655e5995b)
Reviewed-by: Matt Caswell <matt@openssl.org>

RT3856: Fix memory leaks in test code

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 2d540402aac7a05af9c99b58864d53c0201a0b42)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>