Felix Fietkau [Thu, 8 Aug 2013 20:45:09 +0000 (20:45 +0000)]
ubus: update to latest version, fixes a bug in reconnect after ubusd dies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37740
Felix Fietkau [Thu, 8 Aug 2013 16:24:50 +0000 (16:24 +0000)]
hostapd: add a build variant for wpa_supplicant with p2p (aka Wi-Fi Direct) support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37739
Felix Fietkau [Thu, 8 Aug 2013 16:04:19 +0000 (16:04 +0000)]
hostapd: update to latest version (
20130707)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37738
Jo-Philipp Wich [Wed, 7 Aug 2013 13:54:51 +0000 (13:54 +0000)]
include: cmake: pass toolchain directory to default root find path as well
SVN-Revision: 37737
Felix Fietkau [Tue, 6 Aug 2013 18:55:30 +0000 (18:55 +0000)]
hostapd: Settings for DAE/CoA server
hostapd supports "Dynamic Authorization Extensions", making it possible
to forcibly disconnect a user by sending it a RADIUS "Disconnect-Request"
packet.
I've added three new variables to enable setting of the
"radius_das_client" and "radius_das_port" variables in the hostapd
configuration, which enable these extensions.
* dae_client - IP of the client that can send disconnect requests
* dae_secret - shared secret for DAE packets
These are combined into the "radius_das_client" option in hostapd.conf
To enable the server, both dae_client and dae_secret must be set.
* dae_port - optional, default value is 3799 as specified in RFC 5176
Signed-off-by: Martijn van de Streek <martijn@vandestreek.net>
SVN-Revision: 37734
Felix Fietkau [Tue, 6 Aug 2013 17:59:12 +0000 (17:59 +0000)]
hostapd: Fix WDS/WEP usage
WEP in WDS is currently broken in hostapd. Add a patch
to fix the issue.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37733
Felix Fietkau [Tue, 6 Aug 2013 17:59:09 +0000 (17:59 +0000)]
mac80211: Handle concurrent AP/STA beaconing properly
Use the "start_disabled" option in hostapd that was added
in the earlier patch.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37732
Felix Fietkau [Tue, 6 Aug 2013 17:59:05 +0000 (17:59 +0000)]
hostapd: Refresh patches
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37731
Felix Fietkau [Tue, 6 Aug 2013 17:59:02 +0000 (17:59 +0000)]
hostapd: Add an option to disable beaconing
Add a patch for hostapd that introduces a config option
"start_disabled" which can be used to bring up an AP
interface with beaconing disabled. This is useful in
a Repeater-AP setup where the Repeater AP has to start
beaconing only after the WDS link has been established.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37730
John Crispin [Tue, 6 Aug 2013 16:25:45 +0000 (16:25 +0000)]
lantiq: fix TD-W8970 image generation to work with the new tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37727
John Crispin [Tue, 6 Aug 2013 16:25:35 +0000 (16:25 +0000)]
firmware-utils: add a tool TP-Link v2 image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37726
John Crispin [Tue, 6 Aug 2013 16:25:24 +0000 (16:25 +0000)]
firmware-utils: remove v2 support
we will use gabors patch instead
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37725
John Crispin [Tue, 6 Aug 2013 14:32:50 +0000 (14:32 +0000)]
firmware-utils: fix segfault introduced by v2 changes
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 37724
John Crispin [Tue, 6 Aug 2013 14:12:02 +0000 (14:12 +0000)]
ar71xx: remove duplicate dir505 entry from board detection code
https://dev.openwrt.org/ticket/14006
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37723
John Crispin [Tue, 6 Aug 2013 12:31:25 +0000 (12:31 +0000)]
lantiq: add support for tplink images to .../image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37722
John Crispin [Tue, 6 Aug 2013 12:31:20 +0000 (12:31 +0000)]
lantiq: make the split patch recognize the tplink header
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37721
John Crispin [Tue, 6 Aug 2013 12:31:16 +0000 (12:31 +0000)]
lantiq: fix TDW8970.dts commandline and partition name
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37720
John Crispin [Tue, 6 Aug 2013 12:31:10 +0000 (12:31 +0000)]
lantiq: add tplink header id to sysupgrade and fix a comment
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37719
John Crispin [Tue, 6 Aug 2013 12:31:06 +0000 (12:31 +0000)]
firmware-utils: add support for TDW8970 to mktplinkfw
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37718
John Crispin [Tue, 6 Aug 2013 12:30:52 +0000 (12:30 +0000)]
firmware-utils: add v2 header support to firmware-utils
only image build works. inspect and md5 checksum support are not implemented yet
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37717
Felix Fietkau [Tue, 6 Aug 2013 10:31:10 +0000 (10:31 +0000)]
ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37716
Felix Fietkau [Tue, 6 Aug 2013 10:31:06 +0000 (10:31 +0000)]
mac80211: refresh a patch that was using the wrong patch style
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37715
Felix Fietkau [Tue, 6 Aug 2013 10:31:02 +0000 (10:31 +0000)]
mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37714
Felix Fietkau [Tue, 6 Aug 2013 10:30:58 +0000 (10:30 +0000)]
ath9k: add some more fixes for the tx queueing rework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37713
Luka Perkov [Tue, 6 Aug 2013 10:17:16 +0000 (10:17 +0000)]
lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37712
Hauke Mehrtens [Mon, 5 Aug 2013 21:57:48 +0000 (21:57 +0000)]
mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37711
Florian Fainelli [Mon, 5 Aug 2013 20:58:05 +0000 (20:58 +0000)]
kernel: add some missing config symbols
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37710
Hauke Mehrtens [Mon, 5 Aug 2013 16:17:05 +0000 (16:17 +0000)]
kernel: fix DMA error when BCM4331 is connected to BCM4706
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37709
Gabor Juhos [Mon, 5 Aug 2013 12:49:19 +0000 (12:49 +0000)]
ramips: re-implement PCI mux
Parallel flash access on RT3662/RT3883 based devices
is broken without that. It was fixed already some time
ago, but that change seems lost somewhere.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37708
Gabor Juhos [Mon, 5 Aug 2013 12:35:22 +0000 (12:35 +0000)]
ramips: allow to build Seama firmware images with arbitrary size
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37707
John Crispin [Mon, 5 Aug 2013 11:08:30 +0000 (11:08 +0000)]
ar71xx: add usb modules to dir 505 profile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37706
John Crispin [Mon, 5 Aug 2013 10:42:09 +0000 (10:42 +0000)]
octeon: add a few missing symbols to the kernel config file
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37705
John Crispin [Mon, 5 Aug 2013 10:42:00 +0000 (10:42 +0000)]
lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki
Signed-off-by: John Crispin <blogic@openwrt.or
SVN-Revision: 37704
John Crispin [Mon, 5 Aug 2013 10:41:48 +0000 (10:41 +0000)]
ar71xx: add support for dir 505 a1
this patch is based on ...
-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37703
Felix Fietkau [Mon, 5 Aug 2013 10:32:13 +0000 (10:32 +0000)]
gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37702
Felix Fietkau [Mon, 5 Aug 2013 10:08:04 +0000 (10:08 +0000)]
ubus: fix typo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37701
Felix Fietkau [Mon, 5 Aug 2013 10:07:33 +0000 (10:07 +0000)]
ubus: change section/category to base, libs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37700
Gabor Juhos [Mon, 5 Aug 2013 09:24:19 +0000 (09:24 +0000)]
mac80211: fix rt2x00 dependency
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
Gabor Juhos [Mon, 5 Aug 2013 09:09:41 +0000 (09:09 +0000)]
mac80211: rt2x00: fix LED polarity patch
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
Gabor Juhos [Mon, 5 Aug 2013 09:09:40 +0000 (09:09 +0000)]
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
Closes #13951.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
Gabor Juhos [Mon, 5 Aug 2013 09:09:39 +0000 (09:09 +0000)]
ar71xx: fix tl-wa901nd buttons code
This patch fixes the code of the buttons for TP-Link WA901ND.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37696
Gabor Juhos [Mon, 5 Aug 2013 09:09:37 +0000 (09:09 +0000)]
ar71xx: ubnt unifi outdoor register gpio button
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37695
John Crispin [Sun, 4 Aug 2013 17:05:33 +0000 (17:05 +0000)]
x86: change /dev/console to tty to fix job control
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).
This patch switches /dev/console to tty devices for ash on x86 generic target.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 37693
Jonas Gorski [Sun, 4 Aug 2013 15:32:36 +0000 (15:32 +0000)]
mac80211: add rtlwifi drivers
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
Luka Perkov [Sun, 4 Aug 2013 14:20:15 +0000 (14:20 +0000)]
imx6: sync usb chipidea with upstream
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37686
John Crispin [Sun, 4 Aug 2013 13:54:42 +0000 (13:54 +0000)]
generic: make the module reloc pacth work on mips64
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37685
John Crispin [Sun, 4 Aug 2013 13:54:32 +0000 (13:54 +0000)]
octeon: add support for the octeon mips64 SoC
This is the SoC used be the ESR Lite made by ubnt.com
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37684
Luka Perkov [Sun, 4 Aug 2013 13:28:26 +0000 (13:28 +0000)]
imx6: remove sdma binary
SVN-Revision: 37682
Jo-Philipp Wich [Sun, 4 Aug 2013 12:40:24 +0000 (12:40 +0000)]
busybox: rename ntp init script back to sysntpd (#13920)
Renaming the init script to ntp broke LuCI time sync functionality and collides with other ntp packages
SVN-Revision: 37681
Hauke Mehrtens [Sun, 4 Aug 2013 12:36:13 +0000 (12:36 +0000)]
brcm47xx: change board detection for some Asus devices
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
Felix Fietkau [Sun, 4 Aug 2013 12:17:26 +0000 (12:17 +0000)]
build: process transitive dependencies after local dependencies
This improves duplicate dependency detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37679
Felix Fietkau [Sun, 4 Aug 2013 12:17:22 +0000 (12:17 +0000)]
build: suppress conditional dependencies if there are unconditional dependencies on the same symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37678
Hauke Mehrtens [Sun, 4 Aug 2013 09:51:07 +0000 (09:51 +0000)]
kernel: kmod-appletalk: fix dependencies
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.
This fixes the missing dependency of kmod-appletalk on psnap.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37673
Hauke Mehrtens [Sun, 4 Aug 2013 09:41:10 +0000 (09:41 +0000)]
kernel: do not build FW_LOADER as a module.
CONFIG_FW_LOADER=y is set in the generic config and our packages in
packages/kernel/linux are depending on it to be compiled into the
kernel.
This fixes some dependency problem where kmod-r8169 misses
firmware_class.ko.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37672
Felix Fietkau [Sun, 4 Aug 2013 08:55:28 +0000 (08:55 +0000)]
ubus: update to latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37671
Hauke Mehrtens [Sat, 3 Aug 2013 17:12:07 +0000 (17:12 +0000)]
broadcom-diag: show error message in case something goes wrong with gpio irq
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37668
Hauke Mehrtens [Sat, 3 Aug 2013 17:10:37 +0000 (17:10 +0000)]
broadcom-diag: add gpio config for Asus RT-N66U
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37667
Hauke Mehrtens [Sat, 3 Aug 2013 17:09:39 +0000 (17:09 +0000)]
broadcom-diag: add gpio config for Linksys E4200v1
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37666
Felix Fietkau [Sat, 3 Aug 2013 11:56:27 +0000 (11:56 +0000)]
gpio-button-hotplug: cleanup, fix compiler warning
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37665
Felix Fietkau [Sat, 3 Aug 2013 11:49:50 +0000 (11:49 +0000)]
gpio-button-hotplug: fix active_low handling, possibly broken in r37643
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37664
Zoltan Herpai [Sat, 3 Aug 2013 10:37:25 +0000 (10:37 +0000)]
imx23: add missing DTS config for lradc
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37663
Zoltan Herpai [Sat, 3 Aug 2013 10:35:18 +0000 (10:35 +0000)]
imx23: add hw crypto (dcp) support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37662
Hauke Mehrtens [Sat, 3 Aug 2013 10:10:16 +0000 (10:10 +0000)]
kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is set
SVN-Revision: 37661
Hauke Mehrtens [Fri, 2 Aug 2013 20:13:54 +0000 (20:13 +0000)]
kernel: add missing config options
SVN-Revision: 37660
Hauke Mehrtens [Fri, 2 Aug 2013 20:08:20 +0000 (20:08 +0000)]
kernel: add missing module to video-core for kernel < 3.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37659
Hauke Mehrtens [Fri, 2 Aug 2013 20:07:11 +0000 (20:07 +0000)]
kernel: fix usb-chipidea compilation with kernel <= 3.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37658
Hauke Mehrtens [Fri, 2 Aug 2013 16:51:47 +0000 (16:51 +0000)]
kernel: add missing config option
SVN-Revision: 37657
Hauke Mehrtens [Fri, 2 Aug 2013 16:16:23 +0000 (16:16 +0000)]
kernel: add missing config option
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37656
Hauke Mehrtens [Fri, 2 Aug 2013 15:44:04 +0000 (15:44 +0000)]
broadcom-diag: add support for the ASUS RT-N12
This adds button and led info, which I determined
by manually poking the gpio values.
Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37655
Hauke Mehrtens [Fri, 2 Aug 2013 15:06:14 +0000 (15:06 +0000)]
broadcom-diag: increase version number
There are some changes in there and this should be rebuild.
SVN-Revision: 37654
Felix Fietkau [Fri, 2 Aug 2013 10:02:35 +0000 (10:02 +0000)]
mac80211: backport a few upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37653
Jonas Gorski [Thu, 1 Aug 2013 23:04:42 +0000 (23:04 +0000)]
kernel: ocf: add missing kernel dependencies
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher,
so let it select these through kernel config.
Fixes the following build error:
ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37652
Hauke Mehrtens [Thu, 1 Aug 2013 22:19:19 +0000 (22:19 +0000)]
kernel: load libphy before tg3
SVN-Revision: 37651
Hauke Mehrtens [Thu, 1 Aug 2013 21:01:59 +0000 (21:01 +0000)]
brcm47xx: switch to kernel 3.10.4
This uses a new switch driver.
The old ADMTEK Adm6996 switch is not supported any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37650
Hauke Mehrtens [Thu, 1 Aug 2013 20:47:55 +0000 (20:47 +0000)]
brcm47xx: use lib phy when tg3 is in use
This is untested, but probably needed to make it work with the phy lib switch driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37649
Hauke Mehrtens [Thu, 1 Aug 2013 20:46:56 +0000 (20:46 +0000)]
kernel: b53: use devm_gpio_request_one() to request gpio
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37648
Hauke Mehrtens [Thu, 1 Aug 2013 19:33:59 +0000 (19:33 +0000)]
brcm47xx: improve detection of Linksys WRTSL54GS
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37647
Hauke Mehrtens [Thu, 1 Aug 2013 19:17:51 +0000 (19:17 +0000)]
brcm47xx: remove support for kernel 3.9
This is not needed any more.
SVN-Revision: 37646
Hauke Mehrtens [Thu, 1 Aug 2013 19:05:34 +0000 (19:05 +0000)]
kernel: b53: add support for GPIO reset
This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37645
Hauke Mehrtens [Thu, 1 Aug 2013 19:04:12 +0000 (19:04 +0000)]
brcm47xx: add function to get a gpio pin by name
bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based
on configuration data in nvram.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37644
John Crispin [Thu, 1 Aug 2013 14:31:28 +0000 (14:31 +0000)]
gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions. At leat 1 button is in pressed state
in any of those positions. Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37643
John Crispin [Thu, 1 Aug 2013 14:31:24 +0000 (14:31 +0000)]
gpio-button-hotplug: use gpio_button_get_value() to fetch state.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37642
John Crispin [Thu, 1 Aug 2013 14:31:20 +0000 (14:31 +0000)]
gpio-button-hotplug: add inline function gpio_button_get_value().
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37641
John Crispin [Thu, 1 Aug 2013 14:31:15 +0000 (14:31 +0000)]
ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37640
John Crispin [Thu, 1 Aug 2013 14:31:09 +0000 (14:31 +0000)]
ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37639
John Crispin [Thu, 1 Aug 2013 14:31:04 +0000 (14:31 +0000)]
ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37638
John Crispin [Thu, 1 Aug 2013 14:30:58 +0000 (14:30 +0000)]
ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37637
John Crispin [Thu, 1 Aug 2013 14:30:53 +0000 (14:30 +0000)]
ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37636
John Crispin [Thu, 1 Aug 2013 14:30:46 +0000 (14:30 +0000)]
ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.
Support for Poray devices was worked on by:
Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37635
John Crispin [Thu, 1 Aug 2013 14:30:40 +0000 (14:30 +0000)]
lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37634
John Crispin [Thu, 1 Aug 2013 14:30:33 +0000 (14:30 +0000)]
ralink: add mt7620a_mt7610e profile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37633
Zoltan Herpai [Thu, 1 Aug 2013 09:36:37 +0000 (09:36 +0000)]
imx23: add lradc support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37632
Zoltan Herpai [Thu, 1 Aug 2013 06:58:08 +0000 (06:58 +0000)]
kernel: add missing iio config symbols for 3.10
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37631
Felix Fietkau [Wed, 31 Jul 2013 22:07:13 +0000 (22:07 +0000)]
libubox: update to the latest version, fixes a fd deletion race condition in uloop
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37629
Felix Fietkau [Wed, 31 Jul 2013 22:07:09 +0000 (22:07 +0000)]
uhttpd: update to the latest version, fixes a crash on early cgi/lua process termination
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37628
Jo-Philipp Wich [Wed, 31 Jul 2013 18:11:55 +0000 (18:11 +0000)]
base-files: implement -l (--list-backup) sysupgrade parameter to list the files that would be backed up
SVN-Revision: 37627
Hauke Mehrtens [Wed, 31 Jul 2013 17:42:55 +0000 (17:42 +0000)]
broadcom-wl: fix compile error with kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37626
Hauke Mehrtens [Wed, 31 Jul 2013 17:41:52 +0000 (17:41 +0000)]
brcm47xx: run mtd fixtrx linux every time
With this patch it is possible to boot a device with kernel 3.10 a second time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37625
Jo-Philipp Wich [Wed, 31 Jul 2013 14:10:34 +0000 (14:10 +0000)]
base-files: abort sysupgrade if file specified with --restore-config is not found
SVN-Revision: 37624
Jo-Philipp Wich [Wed, 31 Jul 2013 10:44:50 +0000 (10:44 +0000)]
ubox: update to git head
- fixes extroot tag file corruption with long uuids
SVN-Revision: 37623
projects / oweals / openwrt.git / log