oweals/u-boot.git
5 years agoarm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI
Michal Simek [Wed, 13 Feb 2019 12:46:41 +0000 (13:46 +0100)]
arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI

Replace SDHCI controller listing by Kconfig symbol to let SPL know that
this board is using multiple SDHCIs controllers.
Kconfig help message should explain why this is needed.
Origin symbols were used in full u-boot but with moving to distro boot
this was fixed already.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoxilinx: common: Remove !DM_i2C code for reading mac from eeprom
Michal Simek [Tue, 22 Jan 2019 14:55:46 +0000 (15:55 +0100)]
xilinx: common: Remove !DM_i2C code for reading mac from eeprom

All platforms are converted to DM_I2C that's why there is no reason to
keep this code here.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: Remove ancient zynq_i2c driver
Michal Simek [Tue, 22 Jan 2019 11:50:12 +0000 (12:50 +0100)]
i2c: Remove ancient zynq_i2c driver

This driver is replaced by drivers/i2c/i2c-cdns.c DM based driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Heiko Schocher <hs@denx.de>
5 years agoarm64: zynqmp: Remove addresses for i2c controllers
Michal Simek [Fri, 18 Jan 2019 08:09:40 +0000 (09:09 +0100)]
arm64: zynqmp: Remove addresses for i2c controllers

All platforms have been converted to DM that's why there is no reason to
keep addresses in headers. They are all read from DT now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoarm64: zynqmp: Switch all platforms to DM_I2C
Michal Simek [Fri, 18 Jan 2019 08:10:39 +0000 (09:10 +0100)]
arm64: zynqmp: Switch all platforms to DM_I2C

CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio
subsystem already. That's why also remove CMD_PCA953X which is only for
this driver.

zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address.

DM_I2C is not enabled for the whole SoC because it increase size for
mini configurations and there is no I2C symbol present to setup
dependencies.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoARM: zynq: Remove addresses for i2c controllers
Michal Simek [Tue, 22 Jan 2019 11:48:47 +0000 (12:48 +0100)]
ARM: zynq: Remove addresses for i2c controllers

All platforms have been converted to DM that's why there is no reason to
keep addresses in headers. They are all read from DT now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoARM: zynq: Convert dlc20 and zc70x board to DM_I2C
Michal Simek [Tue, 22 Jan 2019 13:43:04 +0000 (14:43 +0100)]
ARM: zynq: Convert dlc20 and zc70x board to DM_I2C

All these board have also eeprom enabled that's why it is also enabled
via defconfig.
There is also no need to have zc70x specific config file that's why also
remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoARM: zynq: Convert Syzygy to DM_I2C
Michal Simek [Tue, 22 Jan 2019 13:12:54 +0000 (14:12 +0100)]
ARM: zynq: Convert Syzygy to DM_I2C

Boards have only one controller enabled that's why move to DM_I2C is
easy.
Add also i2c alias for not to be shown as i2c bus -1 because alias
doesn't exist.
Config file points to MAC stored in eeprom but it is not listed that's
why I have added 24c08 part.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoarm64: versal: Add mini configuration for Versal
Siva Durga Prasad Paladugu [Mon, 4 Feb 2019 10:48:29 +0000 (16:18 +0530)]
arm64: versal: Add mini configuration for Versal

This patch adds new mini target for versal.
This configuration is very minimal in size which runs
from OCM. It contains support for mtest which can be
used for running DDR memory tests.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig
Michal Simek [Mon, 28 Jan 2019 10:12:41 +0000 (11:12 +0100)]
arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig

Move hardcoded IOU_SWITCH_DIVISOR0 to Kconfig to be able to set it up
for different platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: versal: Remove one level of indentation in board_early_init_r()
Michal Simek [Mon, 28 Jan 2019 10:08:00 +0000 (11:08 +0100)]
arm64: versal: Remove one level of indentation in board_early_init_r()

Simplify code indentation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: versal: Define distro boot commnads for qspi ospi and mmc
Siva Durga Prasad Paladugu [Thu, 31 Jan 2019 11:58:13 +0000 (17:28 +0530)]
arm64: versal: Define distro boot commnads for qspi ospi and mmc

This patch adds distro boot commands for qspi, ospi and mmc.
The distro boot commands now reads the script from flash offset
of 63.5MB  for qspi and ospi and executes it. For mmc its same
as generic distro boot command. As either one of the qspi or ospi can
exist on hardware, defined a single distroboot command as xspi
that works for both.

Setup default location via script_offset_f to 63.5MB to match the most
xilinx reference boards for qspi, ospi for now.
512kB allocated space for script size (script_size_f) should be more
than enough to cover custom boot logic.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: versal: Disable showing information about console
Michal Simek [Mon, 28 Jan 2019 09:47:33 +0000 (10:47 +0100)]
arm64: versal: Disable showing information about console

There is no need to see this info. It is just wasting of space/time.
It saves 308Bytes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm: zynq: Update boot_targets based on bootmode
Siva Durga Prasad Paladugu [Fri, 25 Jan 2019 11:36:06 +0000 (17:06 +0530)]
arm: zynq: Update boot_targets based on bootmode

Update boot_targets based on bootmode to run corresponding
distroboot command first.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm: zynq: Define distro boot commnads for qspi, nand and nor
Siva Durga Prasad Paladugu [Fri, 25 Jan 2019 11:36:05 +0000 (17:06 +0530)]
arm: zynq: Define distro boot commnads for qspi, nand and nor

This patch adds distro boot commands for qspi, nand and nor.
The distro boot commands now reads the script from flash offset
of 15.75MB and executes it.

Setup default location via script_offset_f to 15.75MB to match the most
xilinx reference boards for qspi, nand and set the same using
script_offset_nor to 0xE2EC0000 for nor.
256kB allocated space for script size (script_size_f) should be more
than enough to cover custom boot logic.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agospi: zynqmp_gqspi: Enable versal compatible string
Michal Simek [Thu, 29 Nov 2018 07:48:28 +0000 (08:48 +0100)]
spi: zynqmp_gqspi: Enable versal compatible string

Trivial patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: versal: Add mini eMMC configuration
Siva Durga Prasad Paladugu [Tue, 8 Jan 2019 16:17:29 +0000 (21:47 +0530)]
arm64: versal: Add mini eMMC configuration

This patch adds mini eMMC configuration which has only
emmc0 and emmc1 functionalities and can run from small
amount of memory. This is required for memory constraint
devices.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: versal: Enable different ethernet phy for virt platform
Michal Simek [Thu, 17 Jan 2019 08:22:37 +0000 (09:22 +0100)]
arm64: versal: Enable different ethernet phy for virt platform

This platform is going to become generic that's why it is necessary also
enable different PHY vendors.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: versal: Add new Kconfig SYS_MEM_RSVD_FOR_MMU
Siva Durga Prasad Paladugu [Tue, 8 Jan 2019 16:17:26 +0000 (21:47 +0530)]
arm64: versal: Add new Kconfig SYS_MEM_RSVD_FOR_MMU

This patch adds new config option which is used for
reserving a specific memory for MMU Table and in this
case we are using TCM for that purpose.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoARM: zynq: Convert Antminer to OF_SEPARATE
Michal Simek [Mon, 28 Jan 2019 07:40:50 +0000 (08:40 +0100)]
ARM: zynq: Convert Antminer to OF_SEPARATE

Convert board from OF_EMBED to OF_SEPARATE.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoxilinx: common: Add support for DM_I2C zynq_board_read_rom_ethaddr()
Michal Simek [Mon, 21 Jan 2019 15:29:07 +0000 (16:29 +0100)]
xilinx: common: Add support for DM_I2C zynq_board_read_rom_ethaddr()

It is much easier to point to eeprom which stores information like MAC
address directly via DT. eeprom which contains this information is
pointed by /chosen/xlnx,eeprom parameter.

For example:
        chosen {
                bootargs = "earlycon";
                stdout-path = "serial0:115200n8";
+               xlnx,eeprom = &eeprom;
        };

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoxilinx: Move zynq_board_read_rom_ethaddr to shared location
Michal Simek [Mon, 21 Jan 2019 14:25:02 +0000 (15:25 +0100)]
xilinx: Move zynq_board_read_rom_ethaddr to shared location

Zynq and ZynqMP are sharing similar code and there is no reason to do
code duplication. Move zynq_board_read_rom_ethaddr() to common file for
easier conversion to DM.
Use ZynqMP version that's why also add CONFIG_ZYNQ_EEPROM_BUS to Syzygy
which is only one Zynq board which is using this feature.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoarm64: zynqmp: Define distro boot commnads for qspi and nand
Siva Durga Prasad Paladugu [Thu, 24 Jan 2019 06:02:04 +0000 (11:32 +0530)]
arm64: zynqmp: Define distro boot commnads for qspi and nand

This patch adds distro boot commands for qspi and nand. The
distro boot commands now reads the script from flash offset
of 63.5MB and executes it.

Setup default location via script_offset_f to 63.5MB to match the most
xilinx reference boards. 512kB allocated space for script size
(script_size_f) should be more than enough to cover custom boot logic.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoARM: zynq: Run distribution boot commands first
Michal Simek [Thu, 3 Jan 2019 12:58:27 +0000 (13:58 +0100)]
ARM: zynq: Run distribution boot commands first

This patch is doing two things.
1. Exchanging order of boot commands. distro_bootcmd is run first
followed by Xilinx boot command.
2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by
creating Xilinx distribution bootcommand and wiring it as the last
bootcommand.

QSPI, NAND distribution boot command will be added later.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
5 years agoMerge tag 'signed-efi-next' of git://github.com/agraf/u-boot
Tom Rini [Wed, 13 Feb 2019 12:12:29 +0000 (07:12 -0500)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2019-02-13

Goodness this time around:

  - HII protocol, finally allows us to run the UEFI Shell!
    (experimantal, disabled by default)
  - efi selftest now available on Cortex-M
  - NVMe support for distro boot
  - Lots of code cleanup

5 years agoefi_loader: fix EFI_FILE_PROTOCOL.GetInfo()
Heinrich Schuchardt [Sat, 9 Feb 2019 21:23:48 +0000 (22:23 +0100)]
efi_loader: fix EFI_FILE_PROTOCOL.GetInfo()

We check the existence of files with fs_exist(). This function calls
fs_close(). If we do not set the active block device again fs_opendir()
fails and we do not set the flag EFI_FILE_DIRECTORY. Due to this error the
`cd` command in the EFI shell fails.

So let's add the missing set_blk_dev(fh) call.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agolib: vsprintf: avoid overflow printing UTF16 strings
Heinrich Schuchardt [Sun, 10 Feb 2019 10:11:26 +0000 (11:11 +0100)]
lib: vsprintf: avoid overflow printing UTF16 strings

We have to ensure while printing UTF16 strings that we do not exceed the
end of the print buffer.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: Make HII a config option
Alexander Graf [Mon, 11 Feb 2019 14:24:00 +0000 (15:24 +0100)]
efi_loader: Make HII a config option

Heinrich ran into issues with HII and iPXE which lead to #SErrors on
his Odroid-C2 system. We definitely do not want to regress just yet,
so let's not expose the HII protocols by default.

Instead, let's make it a config option that people can play with
This way, we can stabilize the code in tree without breaking any
users.

Once someone figures out, why this breaks iPXE (probably a NULL
dereference), we can enable it by default.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
---

v1 -> v2:

  - Remove HII selftest as well

v2 -> v3:

  - Make config option

5 years agoarm: Leave smccc calls in .text when efi_loader=n
Alexander Graf [Mon, 11 Feb 2019 14:07:17 +0000 (15:07 +0100)]
arm: Leave smccc calls in .text when efi_loader=n

Commit 81ea00838c6 ("efi_loader: PSCI reset and shutdown") put the SMCCC
assembly code into the efi specific code section. This is wrong when we
do not have EFI_LOADER enabled, as that strips efi runtime sections from
the output binary

Reported-by: Michal Simek <monstr@monstr.eu>
Reported-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Fixes: 81ea00838c6 ("efi_loader: PSCI reset and shutdown")
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: debug output for HII protocols
Heinrich Schuchardt [Wed, 23 Jan 2019 21:55:36 +0000 (22:55 +0100)]
efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_selftest: fix HII tests
Heinrich Schuchardt [Wed, 23 Jan 2019 19:36:27 +0000 (20:36 +0100)]
efi_selftest: fix HII tests

efi_st_printf() does not support format code %ld. Anyway the format code
for size_t would be %zu which isn't supported either.

We do not want any divisions to avoid invalid references to integer
arithmetic routines, cf.
https://gcc.gnu.org/onlinedocs/gccint/Integer-library-routines.html.

As a simple remedy remove the noisy messages from the output.
They are not relevant for automated testing.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_selftest: add HII database protocols test
AKASHI Takahiro [Mon, 21 Jan 2019 03:13:01 +0000 (12:13 +0900)]
efi_selftest: add HII database protocols test

This efi_selftest tests HII database protocol and HII string protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi: hii: add HII config routing/access protocols
AKASHI Takahiro [Mon, 21 Jan 2019 03:13:00 +0000 (12:13 +0900)]
efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi: hii: add keyboard layout package support
AKASHI Takahiro [Mon, 21 Jan 2019 03:12:59 +0000 (12:12 +0900)]
efi: hii: add keyboard layout package support

Allow for handling keyboard layout package in HII database protocol.

A package can be added or deleted in HII database protocol, but
we don't set 'current' keyboard layout as there is no driver that
requests a keyboard layout.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi: hii: add guid package support
AKASHI Takahiro [Mon, 21 Jan 2019 03:12:58 +0000 (12:12 +0900)]
efi: hii: add guid package support

Allow for handling GUID package in HII database protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: Initial HII database protocols
Leif Lindholm [Mon, 21 Jan 2019 03:12:57 +0000 (12:12 +0900)]
efi_loader: Initial HII database protocols

This patch provides enough implementation of the following protocols to
run EDKII's Shell.efi and UEFI SCT:

  * EfiHiiDatabaseProtocol
  * EfiHiiStringProtocol

Not implemented are:
  * ExportPackageLists()
  * RegisterPackageNotify()/UnregisterPackageNotify()
  * SetKeyboardLayout() (i.e. *current* keyboard layout)

HII database protocol in this patch series can handle only:
  * GUID package
  * string package
  * keyboard layout package
  (The other packages, except Device path package, will be necessary
   for interactive and graphical UI.)

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agox86: do not use i386 code for x86_64 memory functions
Heinrich Schuchardt [Wed, 23 Jan 2019 01:42:39 +0000 (02:42 +0100)]
x86: do not use i386 code for x86_64 memory functions

arch/x86/lib/string.c contains assembler implementations of memcpy(),
memmove(), and memset() written for i386. Don't use it on x86_64.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: GetNextVariableName() relies on REGEX
Heinrich Schuchardt [Tue, 22 Jan 2019 20:35:23 +0000 (21:35 +0100)]
efi_loader: GetNextVariableName() relies on REGEX

Our implementation of GetNextVariableName() relies on
CONFIG_REGEX=y. So EFI_LOADER has to select it.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: fix GetNextVariableName
Heinrich Schuchardt [Tue, 22 Jan 2019 19:10:46 +0000 (20:10 +0100)]
efi_loader: fix GetNextVariableName

Our current implementation of GetNextVariableName() first collects all EFI
variables. If none is found at all hexport_r() returns a zero length string
terminated by \0 and the value 1 as number of bytes in the returned buffer.

In this case GetNextVariableName() has to return EFI_NOT_FOUND.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: do not use symbolic links
Heinrich Schuchardt [Mon, 21 Jan 2019 18:30:42 +0000 (19:30 +0100)]
efi_loader: do not use symbolic links

Symbolic links are not supported on all file systems, e.g. not on FAT. So
it is not wise to use them in our source tree.

Use a qualified path to refer to lib/efi_loader/efi_freestanding.c in
scripts/Makefile.lib instead.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: Fix build with O=]
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: use library memcpy() in helloworld.efi
Heinrich Schuchardt [Sun, 20 Jan 2019 07:20:32 +0000 (08:20 +0100)]
efi_loader: use library memcpy() in helloworld.efi

Helloworld does not need its own memcpy() implementation anymore. Use the
one provided in efi_freestanding.c.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: use freestanding library for efi apps
Heinrich Schuchardt [Sun, 20 Jan 2019 07:20:31 +0000 (08:20 +0100)]
efi_loader: use freestanding library for efi apps

GCC requires that freestanding programs provide memcpy(), memmove(),
memset(), and memcmp().

Add the library functions when building a *.efi files.

The EFI selftests might use other compilation flags. So use a symbolic
link to provide lib/efi_selftest/efi_freestanding.c and compile it
separately.

Reported-by: Alexander Graf <agraf@suse.de>
Fixes: 5be444d14b38 ("efi_loader: consistent build flags for EFI applications")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: provide freestanding library
Heinrich Schuchardt [Sun, 20 Jan 2019 07:20:30 +0000 (08:20 +0100)]
efi_loader: provide freestanding library

GCC requires that freestanding programs provide memcpy(), memmove(),
memset(), and memcmp().

Provide the required library functions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_selftest: fix variables test for GetNextVariableName()
AKASHI Takahiro [Mon, 21 Jan 2019 11:43:14 +0000 (12:43 +0100)]
efi_selftest: fix variables test for GetNextVariableName()

There is a bug in efi variables test.
Fix it with some cosmetic improvements.

Please note that efi variables test still fails at QueryVariableInfo()
and GetVariable(), but this is not due to a change in this patch.
  ==8<==
  Testing EFI API implementation

  Selected test: 'variables'

  Setting up 'variables'
  Setting up 'variables' succeeded

  Executing 'variables'
  .../u-boot/lib/efi_selftest/efi_selftest_variables.c(60):
  TODO: QueryVariableInfo failed
  .../u-boot/lib/efi_selftest/efi_selftest_variables.c(131):
  TODO: GetVariable returned wrong length 7
  .../u-boot/lib/efi_selftest/efi_selftest_variables.c(133):
  TODO: GetVariable returned wrong value
  Executing 'variables' succeeded

  Boot services terminated

  Summary: 0 failures
  ==>8==

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: implement GetNextVariableName()
AKASHI Takahiro [Mon, 21 Jan 2019 11:43:13 +0000 (12:43 +0100)]
efi_loader: implement GetNextVariableName()

The current GetNextVariableName() is a placeholder.
With this patch, it works well as expected.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
rebased on efi-next
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: comments for variable services
Heinrich Schuchardt [Fri, 18 Jan 2019 18:52:05 +0000 (19:52 +0100)]
efi_loader: comments for variable services

Comment the functions implementing the runtime variable services.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: remove duplicate function mem2hex()
Heinrich Schuchardt [Fri, 18 Jan 2019 17:54:26 +0000 (18:54 +0100)]
efi_loader: remove duplicate function mem2hex()

Replace duplicate function mem2hex() by inline function bin2hex().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: eliminate duplicate function hex2mem()
Heinrich Schuchardt [Fri, 18 Jan 2019 11:31:54 +0000 (12:31 +0100)]
efi_loader: eliminate duplicate function hex2mem()

Use existing inline function hex2bin() instead of defining a new one.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: remove duplicate GUID definition
Heinrich Schuchardt [Tue, 15 Jan 2019 04:44:56 +0000 (05:44 +0100)]
efi_loader: remove duplicate GUID definition

Remove duplicate definition o EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: consistent build flags for EFI applications
Heinrich Schuchardt [Sat, 12 Jan 2019 14:32:06 +0000 (15:32 +0100)]
efi_loader: consistent build flags for EFI applications

At the same time adding and removing the -Os flag does not make any sense.
Actually it leads to -Os not being used.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: use u16* for file name
Heinrich Schuchardt [Sat, 12 Jan 2019 11:02:33 +0000 (12:02 +0100)]
efi_loader: use u16* for file name

UTF-16 strings in our code should all be u16 *. Fix an inconsistency for
file names which may lead to a warning for printf("%ls", ).

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: fix CopyMem()
Heinrich Schuchardt [Wed, 9 Jan 2019 20:41:13 +0000 (21:41 +0100)]
efi_loader: fix CopyMem()

CopyMem() must support overlapping buffers. So replace memcpy() by
memmove().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: refactor switch to non-secure mode
Heinrich Schuchardt [Tue, 8 Jan 2019 17:13:06 +0000 (18:13 +0100)]
efi_loader: refactor switch to non-secure mode

Refactor the switch from supervisor to hypervisor to a new function called
at the beginning of do_bootefi().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_driver: simplify error message
Heinrich Schuchardt [Sun, 6 Jan 2019 16:12:43 +0000 (17:12 +0100)]
efi_driver: simplify error message

Stating the function module is sufficient. We don't need file and line
number. Anyway the format code for the line number was incorrect (should
be %d).

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_selftest: tpl unit test, check return values
Heinrich Schuchardt [Sun, 6 Jan 2019 15:44:16 +0000 (16:44 +0100)]
efi_selftest: tpl unit test, check return values

For some API calls checks for the return values are missing.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_selftest: events unit test, check return values
Heinrich Schuchardt [Sun, 6 Jan 2019 15:38:57 +0000 (16:38 +0100)]
efi_selftest: events unit test, check return values

For some API calls checks for the return values are missing.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_selftest: SNP unit test on sandbox
Heinrich Schuchardt [Sat, 5 Jan 2019 22:50:41 +0000 (23:50 +0100)]
efi_selftest: SNP unit test on sandbox

Running the simple network protocol test on the sandbox requires setting
the environment variable ethact to a network interface connected to a DHCP
server and ethrotate to 'no'. So let's make it an on-request test on the
sandbox (selectable by setting environment variable efi_selftest).

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: efi_set_variable use const void *
Heinrich Schuchardt [Sun, 30 Dec 2018 20:03:15 +0000 (21:03 +0100)]
efi_loader: efi_set_variable use const void *

The SetVariable() runtime service does not change the data passed to it.
So mark the parameter as constant.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: use const efi_guid_t * for variable services
Heinrich Schuchardt [Sun, 30 Dec 2018 19:53:51 +0000 (20:53 +0100)]
efi_loader: use const efi_guid_t * for variable services

The runtime variable services never change GUIDs. So we should declare
the GUID parameters as constant.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: move efi_init_obj_list() to a new efi_setup.c
AKASHI Takahiro [Sun, 30 Dec 2018 14:16:55 +0000 (15:16 +0100)]
efi_loader: move efi_init_obj_list() to a new efi_setup.c

The function, efi_init_obj_list(), can be shared in different pseudo efi
applications, like bootefi/bootmgr as well as my efishell. Moreover, it
will be utilized to extend efi initialization, for example, my "removable
disk support" patch and "capsule-on-disk support" patch in the future.

So with this patch, it will be moved to a new file, efi_setup.c, under
lib/efi_loader and exported, making no changes in functionality.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Remove lines deactivated by #if 1 #else
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agodoc: README.uefi: fix typos
Heinrich Schuchardt [Sun, 30 Dec 2018 11:54:36 +0000 (12:54 +0100)]
doc: README.uefi: fix typos

%s/specfication/specification/
%s/selftest/self-test/
%s/little endian/little-endian/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_selftest: allow building on ARMv7-M
Heinrich Schuchardt [Sun, 30 Dec 2018 09:52:41 +0000 (10:52 +0100)]
efi_selftest: allow building on ARMv7-M

ARMv7-M only supports the Thumb instruction set. Our current crt0 code does
not support it. With the patch we can build all unit tests of the EFI
subsystem that do not require crt0.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: signature of StartImage and Exit
Heinrich Schuchardt [Fri, 28 Dec 2018 11:41:15 +0000 (12:41 +0100)]
efi_loader: signature of StartImage and Exit

We use u16* for Unicode strings and efi_uintn_t for UINTN. Correct the
signature of efi_exit() and efi_start_image().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: avoid unnecessary pointer to long conversion
Heinrich Schuchardt [Fri, 28 Dec 2018 11:41:14 +0000 (12:41 +0100)]
efi_loader: avoid unnecessary pointer to long conversion

debug() support supports %p to print pointers.

The debug message is unique. So there is not need to write a possibly
distracting line number.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: fix memory allocation on sandbox
Heinrich Schuchardt [Sat, 5 Jan 2019 22:41:36 +0000 (23:41 +0100)]
efi_loader: fix memory allocation on sandbox

Commit 7b78d6438a2b ("efi_loader: Reserve unaccessible memory") introduced
a comparison between RAM top and RAM start that was not known at the time
when the patch of commit 49759743bf09 ("efi_loader: eliminate sandbox
addresses") was written.

The sandbox uses an address space that is only relevant in the sandbox
context. We have to map ram_top from the sandbox address space to the
physical address space before using it in the EFI subsystem.

Fixes: 49759743bf09 ("efi_loader: eliminate sandbox addresses")
Fixes: 7b78d6438a2b ("efi_loader: Reserve unaccessible memory")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: CMD_BOOTEFI_HELLO_COMPILE in configs
Heinrich Schuchardt [Sun, 30 Dec 2018 09:11:14 +0000 (10:11 +0100)]
efi_loader: CMD_BOOTEFI_HELLO_COMPILE in configs

It should not be necessary to adjust CMD_BOOTEFI_HELLO_COMPILE in config
files.

arch/arm/lib/crt0_arm_efi.S cannot be compiled in thumbs mode. We can
disable CMD_BOOTEFI_HELLO_COMPILE for CONFIG_CPU_V7M. So there is no longer
a need to disable it in stm32 configs.

helloworld.efi can be built without problems on x86_64. So there is no need
to disable it in chromebook_link64_defconfig and qemu-x86_64_defconfig.

Same is true for ARM V7A. So do not disable CMD_BOOTEFI_HELLO_COMPILE in
kp_imx6q_tpc_defconfig.

Some architecture checks are already make for EFI_LOADER. There is no need
to repeat them for CMD_BOOTEFI_HELLO_COMPILE

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice.Chotard@st.com
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: use named constant for efi_dp_from_mem()
Heinrich Schuchardt [Wed, 26 Dec 2018 21:23:00 +0000 (22:23 +0100)]
efi_loader: use named constant for efi_dp_from_mem()

When calling efi_dp_from_mem() use a named constant for the memory type.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agodistro: not taint environment variables if possible
AKASHI Takahiro [Tue, 4 Dec 2018 06:46:55 +0000 (15:46 +0900)]
distro: not taint environment variables if possible

The aim of this patch is not to have temporary variables used in
distro_bootcmd left as environment variables after run something.
See the discussion[1].
Without this patch, saveenv command also saves those variables, too.
While they are apparently safe, scsi_need_init can be harmful.

Please note that, in most cases, a variable should be converted to
hush's local variable, while "devplist" cannot because it is created
by "part" command as an environment variable.

[1] https://lists.denx.de/pipermail/u-boot/2018-December/350209.html

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: efi_connect_controller() use %pD
Heinrich Schuchardt [Sun, 9 Dec 2018 15:39:20 +0000 (16:39 +0100)]
efi_loader: efi_connect_controller() use %pD

EFI_ENTRY in efi_connect_controller() should use %pD to print the remaining
device path.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: efi_add_runtime_mmio()
Heinrich Schuchardt [Sun, 23 Dec 2018 01:35:13 +0000 (02:35 +0100)]
efi_loader: efi_add_runtime_mmio()

The first parameter of efi_add_runtime_mmio() is a pointer to a
pointer. This should be reflected in the documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agodistro_bootcmd: add NVME support
Heinrich Schuchardt [Fri, 21 Dec 2018 01:18:16 +0000 (02:18 +0100)]
distro_bootcmd: add NVME support

Some boards support NVME drives. We should be able to use them as boot
devices.

NVME access requires running 'nvme scan'.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agotest: tests for u16_strdup() and u16_strcpy()
Heinrich Schuchardt [Fri, 14 Dec 2018 21:00:37 +0000 (22:00 +0100)]
test: tests for u16_strdup() and u16_strcpy()

Provide unit tests for u16_strdup() and u16_strcpy().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agolib: add u16_strcpy/strdup functions
Akashi, Takahiro [Fri, 14 Dec 2018 10:10:38 +0000 (19:10 +0900)]
lib: add u16_strcpy/strdup functions

Add u16_strcpy() and u16_strdup(). The latter function will be
used later in implementing efi HII database protocol.

Signed-off-by: Akashi Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: struct efi_configuration_table
Heinrich Schuchardt [Mon, 17 Dec 2018 23:06:05 +0000 (00:06 +0100)]
efi_loader: struct efi_configuration_table

Commit 393fccdf6c73 ("efi_loader: efi_guid_t must be 64-bit aligned")
has changed the alignment of efi_guid_t. This changed the size of
struct efi_configuration_table on 32-bit systems form 20 to 24 bytes. As
an array of this type is pointed to by the system table this breaks
compatibility with existing versions of GRUB and Linux. Let's get back the
original size by using the attribute __packed.

Fixes: 393fccdf6c73 ("efi_loader: efi_guid_t must be 64-bit aligned")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agoefi_loader: efi_guid_t must be 64-bit aligned
Heinrich Schuchardt [Sun, 16 Dec 2018 10:16:03 +0000 (11:16 +0100)]
efi_loader: efi_guid_t must be 64-bit aligned

The UEFI Specification Version 2.7 Errata A defines:

"EFI_GUID
128-bit buffer containing a unique identifier value.
Unless otherwise specified, aligned on a 64-bit boundary."

Before this patch efi_guid_t was 8-bit aligned.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
5 years agotest/py: use default load address for tftp
Heinrich Schuchardt [Sat, 26 Jan 2019 14:25:12 +0000 (15:25 +0100)]
test/py: use default load address for tftp

On x86_64 the size of the file u-boot loaded by the tftp test has grown in
size such that when loading the file to 0x200000 it overwrites a memory
area reserved for PCI.

If no load address is specified for tftp do not use the ram base address
(or if zero 0x200000) but the default address.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agoMerge git://git.denx.de/u-boot-x86
Tom Rini [Tue, 12 Feb 2019 12:16:46 +0000 (07:16 -0500)]
Merge git://git.denx.de/u-boot-x86

- Edison switch to CONFIG_OF_SEPARATE.
- Tangier initial ACPI support for PMIC device.
- TSC timer driver update to support native calibration.
- Fixes to 64-bit U-Boot proper.

5 years agox86: tangier: Add initial ACPI support for PMIC device
Andy Shevchenko [Tue, 5 Feb 2019 11:06:57 +0000 (13:06 +0200)]
x86: tangier: Add initial ACPI support for PMIC device

Basin Cove PMIC is connected to I2C0 bus which is hidden from the OS
and access is going via SCU device, enumerated via PCI.

For now, we add just a minimum support of PMIC device to allow enabling,
e.g. USB OTG, in the OS.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
5 years agox86: Use the existing GDT in the ROM for 64-bit U-Boot proper
Bin Meng [Thu, 31 Jan 2019 16:22:14 +0000 (08:22 -0800)]
x86: Use the existing GDT in the ROM for 64-bit U-Boot proper

It is unnecessary to use a RAM version GDT for 64-bit U-Boot proper.
In fact we can just use the ROM version directly, which not only
eliminates the risk of being overwritten by application, but also
removes the complexity of patching the cpu_call64().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agox86: Don't copy the cpu_call64() function to a hardcoded address
Bin Meng [Thu, 31 Jan 2019 16:22:13 +0000 (08:22 -0800)]
x86: Don't copy the cpu_call64() function to a hardcoded address

Before jumping to 64-bit U-Boot proper, SPL copies the cpu_call64()
function to a hardcoded address 0x3000000. This can have potential
conflicts with application usage. Switch the destination address
to be allocated from the heap to avoid such risk.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agox86: Change 4-level page table base address to low memory
Bin Meng [Thu, 31 Jan 2019 16:22:12 +0000 (08:22 -0800)]
x86: Change 4-level page table base address to low memory

At present the 4-level page table base address for 64-bit U-Boot
proper is assigned an address that conflicts with CONFIG_LOADADDR.
Change it to an address within the low memory range instead.

Fixes crashes seen when 'dhcp' on QEMU x86_64 with
"-net nic -net user,tftp=.,bootfile=u-boot".

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agox86: tsc: Add support for native calibration of TSC freq
Bernhard Messerklinger [Mon, 7 Jan 2019 11:14:40 +0000 (12:14 +0100)]
x86: tsc: Add support for native calibration of TSC freq

Add native tsc calibration function. Calibrate the tsc timer the same
way as linux does in arch/x86/kernel/tsc.c.

Fixes booting for Apollo Lake processors.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agodoc: Fix CONFIG_OF_SEPARATE description
Andy Shevchenko [Tue, 8 Jan 2019 14:17:42 +0000 (16:17 +0200)]
doc: Fix CONFIG_OF_SEPARATE description

CONFIG_OF_SEPARATE description is not in align with actual code in Makefile and
thus has misleading instructions and explanation.

Make it aligned with the actual code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agox86: edison: Switch to CONFIG_OF_SEPARATE
Andy Shevchenko [Tue, 8 Jan 2019 14:17:43 +0000 (16:17 +0200)]
x86: edison: Switch to CONFIG_OF_SEPARATE

There is no need for Intel Edison to have CONFIG_OF_EMBED to be enabled.
Replace it with CONFIG_OF_SEPARATE.

There is no functional change since u-boot.bin always contains DTB
either embedded or attached.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-i2c
Tom Rini [Mon, 11 Feb 2019 16:15:34 +0000 (11:15 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c

- DM I2C improvements

5 years agoMerge git://git.denx.de/u-boot-marvell
Tom Rini [Mon, 11 Feb 2019 15:35:52 +0000 (10:35 -0500)]
Merge git://git.denx.de/u-boot-marvell

- Fix BUILD_TARGET for ARCH_MVEBU from Baruch
- Fix MVEBU PCIe reset issues from Baruch
- Increase DDR stability on x530 from Chris

5 years agoARM: mvebu: x530: use MV_DDR_FREQ_SAR
Chris Packham [Mon, 11 Feb 2019 01:19:56 +0000 (14:19 +1300)]
ARM: mvebu: x530: use MV_DDR_FREQ_SAR

MV_DDR_FREQ_SAR lets the DDR frequency be determined by hardware
strapping. This also has the side effect of running the DDR clock in
synchronous mode with the CPU core clock rather than from an independent
PLL. We've seen this improve reliability in operation across a number of
boards and temperature ranges.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
5 years agoKconfig: fix BUILD_TARGET for ARCH_MVEBU
Baruch Siach [Thu, 7 Feb 2019 11:21:16 +0000 (13:21 +0200)]
Kconfig: fix BUILD_TARGET for ARCH_MVEBU

Commit dc146ca11187 ("Kconfig: Migrate CONFIG_BUILD_TARGET") made the
mvebu default build target depend on CONFIG_SPL_BUILD. Unfortunately,
there is no such Kconfig symbol. Use the CONFIG_SPL symbol instead to
fix that.

Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Stefan Roese <sr@denx.de>
5 years agoarm: mvebu: cf gt-8k: dts: add PCIe slot reset support
Baruch Siach [Sun, 3 Feb 2019 13:15:40 +0000 (15:15 +0200)]
arm: mvebu: cf gt-8k: dts: add PCIe slot reset support

Describe the mini-PCIe slot gpio reset signal. This enables PCIe devices
on Clearfog GT-8K.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
5 years agopcie: designware: mvebu: fix reset release polarity
Baruch Siach [Sun, 3 Feb 2019 13:15:39 +0000 (15:15 +0200)]
pcie: designware: mvebu: fix reset release polarity

The dm_gpio_set_value() routine sets signal logical level, with
GPIO_ACTIVE_LOW/HIGH value taken into account. Reset active value is 1
(asserted), while reset inactive value is 0 (de-asserted). Fix the reset
toggle code to set the correct reset logic value.

Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
5 years agoarm: mvebu: mcbin: dts: fix PCIe reset polarity
Baruch Siach [Sun, 3 Feb 2019 13:15:38 +0000 (15:15 +0200)]
arm: mvebu: mcbin: dts: fix PCIe reset polarity

The PCIe slot PERST signal is active low. Fix the gpio signal
description in the dts.

This happened to work because the pcie_dw_mvebu driver sets the reset
gpio level to 1 (high) to release the reset. The following commit will
fix that.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
5 years agoi2c: mux: Generate longer i2c mux name
Michal Simek [Thu, 31 Jan 2019 15:31:03 +0000 (16:31 +0100)]
i2c: mux: Generate longer i2c mux name

For !DM case busses are listed as
ZynqMP> i2c bus
Bus 0: zynq_0
Bus 1: zynq_0->PCA9544A@0x75:0
Bus 2: zynq_0->PCA9544A@0x75:1
Bus 3: zynq_0->PCA9544A@0x75:2
Bus 4: zynq_1
Bus 5: zynq_1->PCA9548@0x74:0
Bus 6: zynq_1->PCA9548@0x74:1
Bus 7: zynq_1->PCA9548@0x74:2
Bus 8: zynq_1->PCA9548@0x74:3
Bus 9: zynq_1->PCA9548@0x74:4
Bus 10: zynq_1->PCA9548@0x75:0
Bus 11: zynq_1->PCA9548@0x75:1
Bus 12: zynq_1->PCA9548@0x75:2
Bus 13: zynq_1->PCA9548@0x75:3
Bus 14: zynq_1->PCA9548@0x75:4
Bus 15: zynq_1->PCA9548@0x75:5
Bus 16: zynq_1->PCA9548@0x75:6
Bus 17: zynq_1->PCA9548@0x75:7

where is exactly describing i2c bus topology.
By moving to DM case i2c mux buses are using names from DT and because
i2c-muxes describing sub busses with the same names like i2c@0, etc it
is hard to identify which bus is where.
Linux is adding topology information to i2c-mux busses to identify them
better.
This patch is doing the same and composing bus name with topology
information.

When patch is applied with topology information on zcu102-revA.
ZynqMP> i2c bus
Bus 0: i2c@ff020000
   20: gpio@20, offset len 1, flags 0
   21: gpio@21, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 2: i2c@ff020000->i2c-mux@75->i2c@0
Bus 3: i2c@ff020000->i2c-mux@75->i2c@1
Bus 4: i2c@ff020000->i2c-mux@75->i2c@2
Bus 1: i2c@ff030000  (active 1)
   74: i2c-mux@74, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 5: i2c@ff030000->i2c-mux@74->i2c@0  (active 5)
   54: eeprom@54, offset len 1, flags 0
Bus 6: i2c@ff030000->i2c-mux@74->i2c@1
Bus 7: i2c@ff030000->i2c-mux@74->i2c@2
Bus 8: i2c@ff030000->i2c-mux@74->i2c@3
Bus 9: i2c@ff030000->i2c-mux@74->i2c@4
Bus 10: i2c@ff030000->i2c-mux@75->i2c@0
Bus 11: i2c@ff030000->i2c-mux@75->i2c@1
Bus 12: i2c@ff030000->i2c-mux@75->i2c@2
Bus 13: i2c@ff030000->i2c-mux@75->i2c@3
Bus 14: i2c@ff030000->i2c-mux@75->i2c@4
Bus 15: i2c@ff030000->i2c-mux@75->i2c@5
Bus 16: i2c@ff030000->i2c-mux@75->i2c@6
Bus 17: i2c@ff030000->i2c-mux@75->i2c@7

Behavior before the patch is applied.
ZynqMP> i2c bus
Bus 0: i2c@ff020000
   20: gpio@20, offset len 1, flags 0
   21: gpio@21, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 2: i2c@0
Bus 3: i2c@1
Bus 4: i2c@2
Bus 1: i2c@ff030000  (active 1)
   74: i2c-mux@74, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 5: i2c@0  (active 5)
   54: eeprom@54, offset len 1, flags 0
Bus 6: i2c@1
Bus 7: i2c@2
Bus 8: i2c@3
Bus 9: i2c@4
Bus 10: i2c@0
Bus 11: i2c@1
Bus 12: i2c@2
Bus 13: i2c@3
Bus 14: i2c@4
Bus 15: i2c@5
Bus 16: i2c@6
Bus 17: i2c@7

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: Fill req_seq in i2c_post_bind()
Michal Simek [Thu, 31 Jan 2019 15:31:02 +0000 (16:31 +0100)]
i2c: Fill req_seq in i2c_post_bind()

For i2c controllers which are missing alias in DT there is no req_seq
setup. This function is setting up proper ID based on highest found
alias ID.

On zcu102 this is the behavior when patch is applied.
ZynqMP> i2c bus
Bus 0: i2c@ff020000
   20: gpio@20, offset len 1, flags 0
   21: gpio@21, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 2: i2c@0
Bus 3: i2c@1
Bus 4: i2c@2
Bus 1: i2c@ff030000  (active 1)
   74: i2c-mux@74, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 5: i2c@0  (active 5)
   54: eeprom@54, offset len 1, flags 0
Bus 6: i2c@1
Bus 7: i2c@2
Bus 8: i2c@3
Bus 9: i2c@4
Bus 10: i2c@0
Bus 11: i2c@1
Bus 12: i2c@2
Bus 13: i2c@3
Bus 14: i2c@4
Bus 15: i2c@5
Bus 16: i2c@6
Bus 17: i2c@7

Before this patch applied (controllers have -1 ID)
ZynqMP> i2c bus
Bus 0: i2c@ff020000
   20: gpio@20, offset len 1, flags 0
   21: gpio@21, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus -1: i2c@0
Bus -1: i2c@1
Bus -1: i2c@2
Bus 1: i2c@ff030000  (active 1)
   74: i2c-mux@74, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus -1: i2c@0  (active 0)
   54: eeprom@54, offset len 1, flags 0
Bus -1: i2c@1
Bus -1: i2c@2
Bus -1: i2c@3
Bus -1: i2c@4
Bus -1: i2c@0
Bus -1: i2c@1
Bus -1: i2c@2
Bus -1: i2c@3
Bus -1: i2c@4
Bus -1: i2c@5
Bus -1: i2c@6
Bus -1: i2c@7

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: dm: Record maximum id of devices before probing devices
Michal Simek [Thu, 31 Jan 2019 15:31:01 +0000 (16:31 +0100)]
i2c: dm: Record maximum id of devices before probing devices

There is a need to find out the first free i2c ID which can be used for
i2s buses (including i2c buses connected to i2c mux). Do it early in
init and share this variable with other i2c classes for uniq bus
identification.

add from hs:
fix build problem in i2c-uclass.c for omap devices

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-sh
Tom Rini [Sun, 10 Feb 2019 13:11:53 +0000 (08:11 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-sh

- SD/MMC fixes and ext4 memory leak fix

5 years agoMerge tag 'dm-pull-10feb19' of git://git.denx.de/u-boot-dm
Tom Rini [Sun, 10 Feb 2019 13:11:32 +0000 (08:11 -0500)]
Merge tag 'dm-pull-10feb19' of git://git.denx.de/u-boot-dm

Samsung sound patches (applied for Samsung maintainer)
Common sound support
buildman environment support
of-platdata documentation improvements

5 years agoMerge branch '2019-02-08-master-imports'
Tom Rini [Sun, 10 Feb 2019 13:04:53 +0000 (08:04 -0500)]
Merge branch '2019-02-08-master-imports'

- bcm6345 watchdog, bcm63158/bcm963158 initial support.
- Various TI platform resyncs and improvements.
- FDT support in Android-format images.
- stm32mp1 improvements.

5 years agosound: Allow audio codecs to be used by other SoCs
Simon Glass [Thu, 27 Dec 2018 20:24:39 +0000 (13:24 -0700)]
sound: Allow audio codecs to be used by other SoCs

At present there is still some samsung-specific code in the audio codecs.
Remove it so that these can be used by other SoCs.

Signed-off-by: Simon Glass <sjg@chromium.org>
5 years agosound: i2s: Tidy up a few comments
Simon Glass [Thu, 27 Dec 2018 20:24:38 +0000 (13:24 -0700)]
sound: i2s: Tidy up a few comments

Fix a struct typo and drop a comment (and function prototype) which is not
actually used.

Signed-off-by: Simon Glass <sjg@chromium.org>
5 years agosound: samsung: Fix 'regiter' typo
Simon Glass [Thu, 27 Dec 2018 20:24:37 +0000 (13:24 -0700)]
sound: samsung: Fix 'regiter' typo

Fix a typo that appears many times in this file.

Signed-off-by: Simon Glass <sjg@chromium.org>