Hauke Mehrtens [Sun, 22 Nov 2015 14:15:34 +0000 (14:15 +0000)]
usign: activate format-security checks
This still compiles with format-security checks activated.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47582
Hauke Mehrtens [Sun, 22 Nov 2015 14:13:47 +0000 (14:13 +0000)]
xfsprogs: activate format-security checks
This patch was taken from upstream.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47581
John Crispin [Sun, 22 Nov 2015 11:49:13 +0000 (11:49 +0000)]
ramips: update dtsi files to support second spi device
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47580
John Crispin [Sun, 22 Nov 2015 11:49:04 +0000 (11:49 +0000)]
ramips: use transfer_one instead of transfer_one_message on rt2880 spi
* use kernel buildin transfer_one_message. we only need to implement
transfer_one and set_cs function
* should support use gpio as cs pin
* deselected the spi device when setup and add debug info
* only reset device when first driver probe
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47579
John Crispin [Sun, 22 Nov 2015 11:48:57 +0000 (11:48 +0000)]
ramips: move rt2880 spi clock and reset init code to spi_prepare_message
before spi transfer. use spi_prepare_message to setup spi hardware. it
will setup MSB, spi mode and speed
remove sys_freq member and speed check code
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47578
John Crispin [Sun, 22 Nov 2015 11:48:51 +0000 (11:48 +0000)]
ramips: improve rt2880 spi setup
* check clock rate, SPI mode, and word sizes
* setup spi polarity
* enable spi1 hw if need
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47577
John Crispin [Sun, 22 Nov 2015 11:48:45 +0000 (11:48 +0000)]
ramips: clean up rt2880 spi probe/remove
* fill struct according to the member order
* add error clean up
* set min/max spi speed. so we don't need to check again
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47576
John Crispin [Sun, 22 Nov 2015 11:48:34 +0000 (11:48 +0000)]
ramips: improve rt2880 spi wait ready function
use loops_per_jiffy, spi clock speed and write bytes to get the
spi loop count. if loop to 0 than spi operation timeout.
remove usleep. we only write 1 byte to spi device. use busy loop
would be better.
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47575
John Crispin [Sun, 22 Nov 2015 11:48:21 +0000 (11:48 +0000)]
ramips: remove rt2880 spi lock and clean bit operation
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47574
John Crispin [Sun, 22 Nov 2015 11:48:10 +0000 (11:48 +0000)]
ramips: add rt2880/mt7620 spi register defines
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47573
John Crispin [Sun, 22 Nov 2015 08:04:37 +0000 (08:04 +0000)]
brcm2708: add device detection and use it for network, leds and preinit
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47572
John Crispin [Sat, 21 Nov 2015 21:26:20 +0000 (21:26 +0000)]
conntrack-tools: create /etc/conntrackd directory
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47571
John Crispin [Sat, 21 Nov 2015 21:26:12 +0000 (21:26 +0000)]
conntrack-tools: use INSTALL_DIR once
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47570
John Crispin [Sat, 21 Nov 2015 21:26:06 +0000 (21:26 +0000)]
tools/scons: update to 2.4.1
Update scons to 2.4.1.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47569
John Crispin [Sat, 21 Nov 2015 21:26:02 +0000 (21:26 +0000)]
tools/cmake: update to 3.4.0
Update cmake to 3.4.0.
Refresh patches.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47568
John Crispin [Sat, 21 Nov 2015 21:25:54 +0000 (21:25 +0000)]
kernel/generic: 3.18, 4.y: Add support for Quectel EC20 Mini PCIe module
* both patches (qcserial/qmi_wwan) were submitted upstream[1,2]
* build tested on 3.18 and 4.1
* run tested on imx6 platform with 4.1
1. http://article.gmane.org/gmane.linux.usb.general/132998
2. http://article.gmane.org/gmane.linux.usb.general/133113
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47567
John Crispin [Sat, 21 Nov 2015 21:25:43 +0000 (21:25 +0000)]
lantiq: add phy led config support over devicetree bindings
This patch adds the posibility to config the led behaviour of the lantiq phys
over the devicetree bindings.It patches the 0023-NET-PHY-adds-driver-for-lantiq-PHY11G
for 3.18 and 4.1. I have also added a register description overview for
applicable values. This goes to the documentation folder in the linux kernel.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
SVN-Revision: 47566
John Crispin [Sat, 21 Nov 2015 21:25:33 +0000 (21:25 +0000)]
ralink: add missing nand layer hack
It turned out that mtk_nand driver uses some sophisticated accounting and a
general nand code must be patched.
This patch adds required read and erase calls to a general nand code. I
used a code for re6500 released by Linksys as a reference.
All required operations (erase, write and read) are usable. However I found
that jffs2 filesystem can be created only on top of a ubi volume. I tried
to create jffs2 directly on mtd device but pages with clean markers are
became uncorrectable.
Signed-off-by: Kirill Berezin <fyiwdt@gmail.com>
SVN-Revision: 47565
John Crispin [Sat, 21 Nov 2015 21:25:28 +0000 (21:25 +0000)]
kernel: fix building RTC drivers
All RTC drivers require the kernel to be built with CONFIG_RTC_CLASS=y.
Set it accordingly.
Tested only with DS1307.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 47564
John Crispin [Sat, 21 Nov 2015 21:25:20 +0000 (21:25 +0000)]
lantiq: tweak DWC2 default parameters
This patch improves the default configuration of DWC2 on lantiq SoCs
somewhat:
* Set maximum packet count to largest allowed value by the DWC2 (511)
* Use 16-bit DMA bursts
* Divide fifo buffers more evenly
Default fifo buffer sizes from original ltq-hcd driver seem really
irrational. For example according to DWC2 data book rxfifo size of 240
will not fit even a single full length USB packet. On the other hand
non-periodic tx fifo size of 240 is more than enough to fit one complete
packet.
Change the sizes around to improve the situation and to fix some issues
especially with isochronous USB transfers.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 47563
John Crispin [Sat, 21 Nov 2015 21:25:13 +0000 (21:25 +0000)]
brcm2708: enable hard float ABI
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47562
John Crispin [Sat, 21 Nov 2015 21:25:04 +0000 (21:25 +0000)]
brcm2708: add support for multi-device images
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47561
John Crispin [Sat, 21 Nov 2015 21:24:57 +0000 (21:24 +0000)]
brcm2708: rename image device definition
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47560
John Crispin [Sat, 21 Nov 2015 21:24:50 +0000 (21:24 +0000)]
brcm2708: revert sd image extension to .img
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47559
John Crispin [Sat, 21 Nov 2015 21:24:44 +0000 (21:24 +0000)]
brcm2708: simplify gzip image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47558
John Crispin [Sat, 21 Nov 2015 21:24:38 +0000 (21:24 +0000)]
ramips: init usb power for Lenovo Y1S
Signed-off-by: Shonn Lu <countrysideboy@qq.com>
SVN-Revision: 47557
John Crispin [Sat, 21 Nov 2015 21:24:28 +0000 (21:24 +0000)]
mac80211: fix autoprobing of mt7601u driver
Strigng passed to autoprobing script should match
module's name. Currently that string is missing trailing "u".
With that change mt7601u driver really gets autoloaded on
USB Wi-Fi dongle insertion:
------------------>8---------------
[ 0.930000] hub 2-0:1.0: USB hub found
[ 0.940000] hub 2-0:1.0: 1 port detected
[ 1.150000] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[ 1.720000] init: - preinit -
Detected arc-sdp // Synopsys AXS101 Development Board
[ 1.810000] random: mktemp urandom read with 3 bits of entropy
available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug
level
[ 4.940000] procd: - early -
[ 5.540000] procd: - ubus -
[ 6.550000] procd: - init -
Please press Enter to activate this console.
[ 7.160000] Loading modules backported from Linux version
master-2015-10-26-0-g28c26cb
[ 7.170000] Backport generated by backports.git
backports-20150903-4-g12cf266
[ 7.200000] cfg80211: World regulatory domain updated:
[ 7.230000] cfg80211: DFS Master region: unset
[ 7.230000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.250000] cfg80211: (
2402000 KHz -
2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.270000] cfg80211: (
2457000 KHz -
2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.270000] cfg80211: (
2474000 KHz -
2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.290000] cfg80211: (
5170000 KHz -
5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.290000] cfg80211: (
5250000 KHz -
5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 7.310000] cfg80211: (
5490000 KHz -
5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 7.310000] cfg80211: (
5735000 KHz -
5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.330000] cfg80211: (
57240000 KHz -
63720000 KHz @
2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 7.470000] usb 1-1: reset high-speed USB device number 2 using
ehci-platform
[ 7.620000] mt7601u 1-1:1.0: ASIC revision:
76010001 MAC revision:
76010500
[ 7.630000] mt7601u 1-1:1.0: Firmware Version: 0.1.00 Build: 7640
Build time: 201302052146____
[ 8.040000] mt7601u 1-1:1.0: Warning: unsupported EEPROM version 0d
[ 8.050000] mt7601u 1-1:1.0: EEPROM ver:0d fae:00
[ 8.050000] mt7601u 1-1:1.0: EEPROM country region 01 (channels 1-13)
[ 8.320000] usbcore: registered new interface driver mt7601u
------------------>8---------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47556
John Crispin [Sat, 21 Nov 2015 21:24:23 +0000 (21:24 +0000)]
ar71xx: fix the SingleProfile kernel size limit for dLAN devices
it ends up as $(2) of CatFiles and must be a plain decimal value.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 47555
John Crispin [Sat, 21 Nov 2015 21:24:18 +0000 (21:24 +0000)]
ar71xx: add support for the devolo dLAN Hotspot
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 47554
John Crispin [Sat, 21 Nov 2015 21:24:11 +0000 (21:24 +0000)]
ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703N
The hwid check was wrong, causing the AR71XX_MODEL value to end with a
space (as $hwver was unset).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47553
John Crispin [Sat, 21 Nov 2015 21:24:03 +0000 (21:24 +0000)]
oxnas: add missing platform bindings for stmmac glue
r47218 was missing needed changes which were accidentally
ommitted from the patch.
This should fix #20878
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47552
Hauke Mehrtens [Sat, 21 Nov 2015 17:40:46 +0000 (17:40 +0000)]
kernel: make kmod-usb-dwc2 depend on kmod-usb-gadget on omap target
This dependency is missing for the omap target.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47551
Hauke Mehrtens [Sat, 21 Nov 2015 17:36:31 +0000 (17:36 +0000)]
kernel: fix build of kmod-dwc2
dwc2_platform.koi is included in dwc2.ko with kernel 4.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47550
Hauke Mehrtens [Sat, 21 Nov 2015 17:35:59 +0000 (17:35 +0000)]
kernel: add missing config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47549
Felix Fietkau [Sat, 21 Nov 2015 10:55:36 +0000 (10:55 +0000)]
ath10k: select kernel relayfs support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47548
Felix Fietkau [Sat, 21 Nov 2015 10:55:29 +0000 (10:55 +0000)]
ipq806x: fix PCIe reset gpio handling - the core already handles the active-low flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47547
Felix Fietkau [Sat, 21 Nov 2015 10:55:17 +0000 (10:55 +0000)]
ipq806x: assert AHB PCIe reset during init
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47546
Felix Fietkau [Sat, 21 Nov 2015 10:55:05 +0000 (10:55 +0000)]
ipq806x: reduce PCIe buffer size setting to fix potential data corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47545
Felix Fietkau [Sat, 21 Nov 2015 10:54:58 +0000 (10:54 +0000)]
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47544
Felix Fietkau [Sat, 21 Nov 2015 10:54:53 +0000 (10:54 +0000)]
ipq806x: fix pcie tx0-term-offset setting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47543
Felix Fietkau [Sat, 21 Nov 2015 10:54:48 +0000 (10:54 +0000)]
ipq806x: fix device tree nodes for PCI to get rid of I/O and memory offsets
Fixes QCA99x0 detection issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47542
Jo-Philipp Wich [Fri, 20 Nov 2015 23:59:31 +0000 (23:59 +0000)]
mvebu: migrate led and network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47541
Jo-Philipp Wich [Fri, 20 Nov 2015 23:52:31 +0000 (23:52 +0000)]
mpc85xx: migrate network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47540
Hauke Mehrtens [Fri, 20 Nov 2015 23:38:39 +0000 (23:38 +0000)]
uboot-omap: fix build with gcc-5
This fixes some problems with gcc-5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47539
Jo-Philipp Wich [Fri, 20 Nov 2015 23:34:11 +0000 (23:34 +0000)]
ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2 (again)
When fixing the model string for WNDR3700v2 which contain a model string
followed by 0xff in r46455, the match for other versions of the WNDR3700v2
which just contain lots of 0xff broke (as the 0xff $model is checked for
is stripped off).
Fix by stripping off non-printable characters only for the actual output
string, but not for the internal matching.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47538
Hauke Mehrtens [Fri, 20 Nov 2015 22:50:11 +0000 (22:50 +0000)]
uboot-kirkwood: fix build with gcc-5
This backports a patch from upstream u-boot to make it compile with gcc-5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47537
Hauke Mehrtens [Fri, 20 Nov 2015 22:33:59 +0000 (22:33 +0000)]
kernel: add missing config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47536
Hauke Mehrtens [Fri, 20 Nov 2015 22:22:37 +0000 (22:22 +0000)]
uboot-oxnas: fix build with gcc-5
This backports a patch from upstream u-boot to make it compile with gcc-5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47535
Jo-Philipp Wich [Fri, 20 Nov 2015 22:14:36 +0000 (22:14 +0000)]
ar71xx: migrate led and network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47534
Hauke Mehrtens [Fri, 20 Nov 2015 21:15:48 +0000 (21:15 +0000)]
uboot-mxs: fix build with gcc-5
gcc-5 handles inline without static differently and that makes
uboot-mxs fail to build. Remove the inline so it gets exported and can
be used in other functions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47533
Luka Perkov [Fri, 20 Nov 2015 05:21:19 +0000 (05:21 +0000)]
imx6: ventana: remove invalid video options from bootscript
Removed video related kernel params that are only appropriate for the
Freescale downstream vendor kernel and not appriate for mainline linux.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 47532
Felix Fietkau [Thu, 19 Nov 2015 21:49:26 +0000 (21:49 +0000)]
ubus: update to the latest version, adds support for monitoring system bus traffic
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47531
Hauke Mehrtens [Thu, 19 Nov 2015 19:36:03 +0000 (19:36 +0000)]
ath10k-firmware: fix patch of firmware
This fixes a build error.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47517
Zoltan Herpai [Thu, 19 Nov 2015 14:43:16 +0000 (14:43 +0000)]
packages: uboot-sunxi: update Lamobo R1 patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 47516
Steven Barth [Thu, 19 Nov 2015 11:49:21 +0000 (11:49 +0000)]
odhcpd: correctly handle netlink congestion case
Thanks to @ktgeek and @willmo for diagnosing
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47514
Luka Perkov [Thu, 19 Nov 2015 08:00:17 +0000 (08:00 +0000)]
imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47513
Luka Perkov [Wed, 18 Nov 2015 22:53:43 +0000 (22:53 +0000)]
imx6: remove obsolete VENTANA_DTS from profile
The device-tree files are now specified in the image Makefile
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 47512
Luka Perkov [Wed, 18 Nov 2015 22:06:54 +0000 (22:06 +0000)]
imx6: add Vetnana LVDS support
These patches have been submitted to upstream Linux and are pending acceptance.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 47511
Luka Perkov [Wed, 18 Nov 2015 22:06:50 +0000 (22:06 +0000)]
imx6: ventana: fix GW16083 device-tree patch
The 206-ARM-imx-ventana-added-GW16083-to-device-tree.patch merged wrong in
the conversion from 3.18 to 4.1. This patch resolves that and puts the
device-tree nodes in the correct place.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 47510
Luka Perkov [Wed, 18 Nov 2015 21:36:36 +0000 (21:36 +0000)]
imx6: drop support for kernel 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47509
Luka Perkov [Wed, 18 Nov 2015 21:35:24 +0000 (21:35 +0000)]
imx6: convert ventana images to squashfs+ubifs overlay
Replace the ventana ubi images from a single rootfs volume containing the
rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi
containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs'
squasfs volume, and rootfs_data an empty ubifs volume.
At the same time move ventana image creation over to using the new
TARGET_DEVICE syntax as a cleanup.
Additionally removed FIT image creation as it is recommended that this be
done manually to produce signed FIT images if needed.
Note that a bootscript is needed for Ventana to change its default mtdparts
to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there
are patches in OpenWrt kernels that try to auto-attach and auto-mount and these
get in the way if the mtd partition is named 'rootfs'.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 47508
Luka Perkov [Wed, 18 Nov 2015 21:35:16 +0000 (21:35 +0000)]
imx6: kernel: add UBI_BLOCK support
UBI_BLOCK support is needed for mounting squashfs over UBI
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 47507
Luka Perkov [Wed, 18 Nov 2015 21:35:12 +0000 (21:35 +0000)]
imx6: switch to v4.1
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47506
Luka Perkov [Wed, 18 Nov 2015 21:35:09 +0000 (21:35 +0000)]
imx6: add Gateworks GW551x support
Upstream patch:
e9d6d6b62f306ba83e1441af5daf2809a6167474
Add support for the Gateworks GW5510 board featuring:
* i.MX6 SoC
* up to 512MB DDR3
* up to 2GB NAND flash
* 1x miniPCIe socket (with USB)
* HDMI out (micro-HDMI)
* HDMI in (micro-HDMI) (currently supported by only vendor kernel)
* TTL level I/O (supported by GW16111 breakout board):
* I2C
* 2x UART
* CAN
* 2x DIO (GPIO/PWM)
* USB OTG
Also add support to OpenWrt build system
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47505
Luka Perkov [Wed, 18 Nov 2015 21:35:04 +0000 (21:35 +0000)]
kirkwood: nsa310s: fix partition size
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47504
Hauke Mehrtens [Wed, 18 Nov 2015 20:31:23 +0000 (20:31 +0000)]
kernel: fix menu for scsi-tape
this should be placed under the block menu entry, this fixes r47482.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47503
John Crispin [Wed, 18 Nov 2015 15:00:38 +0000 (15:00 +0000)]
uboot-envtools: add support for linkits7688d
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47500
Felix Fietkau [Wed, 18 Nov 2015 00:57:22 +0000 (00:57 +0000)]
gcc: fix internal compiler error on MIPS with MIPS16 enabled (triggered by libpcap)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47494
Jo-Philipp Wich [Tue, 17 Nov 2015 16:34:43 +0000 (16:34 +0000)]
netifd: fix device status reporting for external interfaces
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47493
Felix Fietkau [Tue, 17 Nov 2015 12:38:41 +0000 (12:38 +0000)]
gcc: switch to 5.2.0 by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47492
Felix Fietkau [Tue, 17 Nov 2015 12:38:32 +0000 (12:38 +0000)]
gdb: use separate patches for upstream and ARC gdb
With bump of upstream GDB from 7.9 to 7.10 at least
100-no_extern_inline.patch became incompatible with
ARC gdb (which is still based on upstream 7.9 branch).
So until ARC support is not completely upstreamed
(which we expect to happen in coming months) we'll need to have
separate patches for ARC gdb.
This time clean build-tested for Netgear WNDRMAC & AXS101.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47491
Felix Fietkau [Tue, 17 Nov 2015 12:38:22 +0000 (12:38 +0000)]
gcc: add a patch to 5.x that supports translation of __FILE__ paths
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47490
Rafał Miłecki [Tue, 17 Nov 2015 07:26:12 +0000 (07:26 +0000)]
procd: drop nand_upgrade_stage1 from sysupgrade_pre_upgrade hooks
Now we have all targets using platform_pre_upgrade (and calling
nand_do_upgrade directly) we don't need nand_upgrade_stage1 to be in
sysupgrade_pre_upgrade hooks anymore.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47489
Jo-Philipp Wich [Mon, 16 Nov 2015 18:15:00 +0000 (18:15 +0000)]
musl: fix handling of point-to-point interfaces in getifaddrs()
Current musl reports the peer (remote) address of a point-to-point
interface and does not store the local address at all.
Apply the same special treatment of IFA_LOCAL to musl's getifaddrs() which
is also used in glibc and uclibc.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47488
Jo-Philipp Wich [Mon, 16 Nov 2015 17:39:32 +0000 (17:39 +0000)]
kernel: kmod-udptunnel6 depends on IPv6
Spotted a missing 'ip6_udp_tunnel.ko' build failure during a local
build with all kmods enabled but globally disabled IPv6 support.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47487
Rafał Miłecki [Mon, 16 Nov 2015 12:22:47 +0000 (12:22 +0000)]
kernel: add CONFIG_SSB_HOST_SOC symbol
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47486
Felix Fietkau [Mon, 16 Nov 2015 11:02:14 +0000 (11:02 +0000)]
ltq-app-vdsl: convert init script to procd, add support for switching between atm and ptm
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47485
Rafał Miłecki [Mon, 16 Nov 2015 07:18:37 +0000 (07:18 +0000)]
brcm47xx: backport BCM47xx MIPS commits from 4.3 and 4.4-rc1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47484
Rafał Miłecki [Mon, 16 Nov 2015 06:55:38 +0000 (06:55 +0000)]
kernel: backport ssb changes from 4.4-rc1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47483
Hauke Mehrtens [Sun, 15 Nov 2015 22:14:45 +0000 (22:14 +0000)]
kernel: support for scsi tape devices
Support for scsi tape devices as kernel module.
This allow to use scsi tape devices in openwrt.
Signed-off-by: Giuseppe Magnotta <giuseppe.magnotta@gmail.com>
[moved to block.mk]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47482
Hauke Mehrtens [Sun, 15 Nov 2015 22:09:13 +0000 (22:09 +0000)]
base-files: add DCCP to /etc/protocols
Fixes this conntrackd warning:
WARNING: getprotobyname() cannot find protocol `DCCP' in /etc/protocols
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47481
Felix Fietkau [Sun, 15 Nov 2015 21:34:15 +0000 (21:34 +0000)]
conntrack-tools: preserve /etc/conntrackd during upgrade
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47480
Felix Fietkau [Sun, 15 Nov 2015 21:34:08 +0000 (21:34 +0000)]
kernel/modules: add OCTEON SHA512 module
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47479
Felix Fietkau [Sun, 15 Nov 2015 21:34:00 +0000 (21:34 +0000)]
kernel/modules: move SHA512 to its own package
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47478
Felix Fietkau [Sun, 15 Nov 2015 21:33:54 +0000 (21:33 +0000)]
kernel/modules: add OCTEON SHA256 module
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47477
Felix Fietkau [Sun, 15 Nov 2015 21:33:49 +0000 (21:33 +0000)]
kernel/modules: add OCTEON SHA1 module
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47476
Felix Fietkau [Sun, 15 Nov 2015 21:33:39 +0000 (21:33 +0000)]
kernel/modules: add OCTEON MD5 module
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47475
Felix Fietkau [Sun, 15 Nov 2015 21:33:33 +0000 (21:33 +0000)]
octeon: remove 3.18 support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47474
Felix Fietkau [Sun, 15 Nov 2015 21:33:28 +0000 (21:33 +0000)]
octeon: switch to 4.3
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47473
Felix Fietkau [Sun, 15 Nov 2015 21:33:23 +0000 (21:33 +0000)]
octeon: add support for 4.3
Runtime tested on Ubiquiti EdgeRouter Lite.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47472
Felix Fietkau [Sun, 15 Nov 2015 21:33:14 +0000 (21:33 +0000)]
kernel: add patch to fix prefsrc lookups
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47471
Felix Fietkau [Sun, 15 Nov 2015 21:33:07 +0000 (21:33 +0000)]
xtables-addons: update to 2.9
Fixes compilation with Linux 4.3. Runtime tested on Ubiquiti EdgeRouter
Lite with Linux 3.18, 4.1 and 4.3.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47470
Felix Fietkau [Sun, 15 Nov 2015 21:33:01 +0000 (21:33 +0000)]
ath10k-firmware: update firmware version for QCA988X (again)
Updates the ath10-firmware release to current git and updates the
QCA988X firmware in use to version 10.2.4.70.12-2 which appears to
actually fix the stability problems when using a Nexus 5X phone as
per issue #20854. Also updates the Makefile for a change in the
location of the board.bin file for QCA988X in the source repository.
Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
SVN-Revision: 47469
Felix Fietkau [Sat, 14 Nov 2015 14:22:24 +0000 (14:22 +0000)]
ipq806x: enable vfpv4 support and set cpu type to cortex-a9
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47468
Hauke Mehrtens [Fri, 13 Nov 2015 23:51:31 +0000 (23:51 +0000)]
kernel: take bcm47xx_nvram.h from kernel and not backports
compat-wireless/backports now contains a bcm47xx_nvram.h file to
backport some of the functions in it which are used by the bcmfmac
driver. This file just checks for the kernel versions and provide an
empty implementations on older kernel versions. This is OK on most
systems, but on bcm47xx / bcm53xx systems we want to call the real
functions here. This commit removes the file from backports in our
build process like we do it with the bcma and ssb header files. Instead
we add a recent version into our kernel so all code uses only one
header file. On bcm47xx / bcm53xx the real implementations of this code
will be used.
Reported-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47467
Felix Fietkau [Fri, 13 Nov 2015 11:35:41 +0000 (11:35 +0000)]
gcc: set the isl/cloog prefix when graphite is enabled, disable it explicitly if it is disabled in the config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47465
Felix Fietkau [Fri, 13 Nov 2015 11:35:37 +0000 (11:35 +0000)]
tools: add isl (used for graphite on GCC 5)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47464
Felix Fietkau [Fri, 13 Nov 2015 11:34:18 +0000 (11:34 +0000)]
scripts/diffconfig.sh: reduce config output with CONFIG_BUSYBOX_CUSTOM
Use similar approach as r47461 to reduce output for busybox config.
Since r39435 CONFIG_BUSYBOX_CUSTOM=y has caused the addition of
all ~260 busybox config options to the diffconfig output even if
only one option has been changed.
This patch eliminates the unchanged busybox config options from the output
and leaves only the actually modified options.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47463
Felix Fietkau [Thu, 12 Nov 2015 01:06:10 +0000 (01:06 +0000)]
scripts/diffconfig.sh: reduce config output with CONFIG_ALL_KMODS
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47461
Felix Fietkau [Thu, 12 Nov 2015 00:24:27 +0000 (00:24 +0000)]
netifd: update to the latest version, contains several fixes, including one for interface ip4/ip6table for device routes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47460
projects / librecmc / librecmc.git / log