Tom Rini [Tue, 21 Apr 2020 21:53:23 +0000 (17:53 -0400)]
Merge tag 'dm-pull-21apr20' of git://git.denx.de/u-boot-dm
Various improvements to buildman summary output
Tom Rini [Tue, 21 Apr 2020 19:20:42 +0000 (15:20 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Backplane support and bug fixes
Simon Glass [Thu, 9 Apr 2020 16:49:45 +0000 (10:49 -0600)]
buildman: Change the exit codes
The current exit codes of 128 and 129 are useful in that they do not
conflict with those returned by tools, but they are not actually valid.
It seems better to pick some codes which work with 'bit bisect run'.
Update them to 100 (for errors) and 101 (for warnings).
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:54 +0000 (15:08 -0600)]
buildman: Update the TODO items
A few of these have been done. Drop those and add some new ideas.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:53 +0000 (15:08 -0600)]
buildman: Add an option to ignore migration warnings
These are becoming more common now. They cause boards to show warnings
which can be mistaking for compiler warnings.
Add a buildman option to ignore them. This option works only with the
summary option (-s). It does not affect the build process.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:52 +0000 (15:08 -0600)]
buildman: Add an option to ignore device-tree warnings
Unfortunately the plague of device-tree warnings has not lifted. These
warnings infiltrate almost every build, adding noise and confusion.
Add a buildman option to ignore them. This option works only with the
summary option (-s). It does not affect the build process.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:51 +0000 (15:08 -0600)]
buildman: Make -I the default
At present buildman defaults to running 'mrproper' on every thread before
it starts building commits for each board. This can add a delay of about 5
seconds to the start of the process, since the tools and other invariants
must be rebuilt.
In particular, a build without '-b', to build current source, runs much
slower without -I, since any existing build is removed, thus losing the
possibility of an incremental build.
Partly this behaviour was to avoid strange build-system problems caused by
running 'make defconfig' for one board and then one with a different
architecture. But these problems were fixed quite a while ago.
The -I option (which disabled mrproper) was introduced four years ago and
does not seem to cause any problems with builds.
So make -I the default and deprecate the option. To allow use of
'mrproper', add a new -m flag.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:50 +0000 (15:08 -0600)]
buildman: Update workflow documentation with more detail
Make a few additions and change some wording in the workflow
documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:49 +0000 (15:08 -0600)]
buildman: Add the abbreviation for --boards
This option may be frequency used, so mention that it can be abbreviated
to --bo
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:48 +0000 (15:08 -0600)]
buildman: Update the 'theory of operation' a little
Make a few updates to this important section of the documentation, to
make things clearer.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:47 +0000 (15:08 -0600)]
buildman: Show a summary of the build result
When buildman finishes it leaves the last summary line visible, which
shows the number of successful builds, builds with warnings and builds
with errors.
It is useful also to see how many builds were done in total along with
the time taken. Show these on a separate line before buildman finishes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:46 +0000 (15:08 -0600)]
buildman: Limit the length of progress messages
If a progress message is longer than the terminal line it will scroll the
terminal. Limit the messages to the terminal width.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:45 +0000 (15:08 -0600)]
buildman: Show the number of builds remaining
It is nice to see the actual number of builds remaining to complete. Add
this in the progress message, using a different colour.
Drop the unnecessary 'name' variable while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:44 +0000 (15:08 -0600)]
buildman: Drop unused output code
The commit counter is a hangover from when buildman processed each board
for a commit. Now buildman processes each commit for a board, so this
output is never triggered.
Delete it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:43 +0000 (15:08 -0600)]
buildman: Show a message when fetching a repo
Fetching updated versions of a repo can take time. At present buildman
gives no indication that it is doing this.
Add a message to explain the delay.
Tidy up a few other messages while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:42 +0000 (15:08 -0600)]
buildman: Drop the line-clearing code in Builder
The new feature in terminal can be used by buildman. Update the Builder
class accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:41 +0000 (15:08 -0600)]
patman: Support limiting output to a single line
When outputing a progress line we don't want it to go past the end of the
current terminal line, or it will not be possible to erase it. Add an
option to Print() which allows limiting the output to the terminal width.
Since ANSI sequences do not take up space on the terminal, these are
removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:40 +0000 (15:08 -0600)]
patman: Support erasing a previously unfinished text line
When printing progress it is useful to print a message and leave the
cursor at the end of the line until the operation is finished. When it is
finished, the line needs to be erased so a new line can start in its place.
Add a function to handle clearing a line previously written by
terminal.Print()
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:39 +0000 (15:08 -0600)]
patman: Update flushing Print() for Python 3
This does not seem to work on Python 3. Update the code to use the
built-in support.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:38 +0000 (15:08 -0600)]
buildman: Use spaces in the board list
At present the board names shown with -l are separated by commas. This
makes it hard to double-click to select a particular board. Also it is not
possible to select all boards and paste them as arguments to a subsequent
buildman run, since buildman requires spaces to separate the list on the
command line, not commas.
Change the output format to use spaces instead of commas.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:37 +0000 (15:08 -0600)]
buildman: Show the list of boards in magenta
It is quite hard to see the list of board for each error line since the
colour is the same as the actual error line. Show the board list in
magenta so that it is easier to distinguish them.
There is no point in checking the colour of the overall line, since there
are now multiple colours. So drop those tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:36 +0000 (15:08 -0600)]
buildman: Use an object to hold error lines
At present the string for each error line is created in _CalcErrorDelta()
and used to create the summary output. This is inflexible since all the
information (error/warning character, error line, list of boards with that
error line) is munged together in a string.
Create an object to hold this information and only convert it to a string
when printing the actual output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:35 +0000 (15:08 -0600)]
buildman: Use yellow consistently for warning lines
At present warnings are shown in yellow in the summary (-s) but magenta in
the detail listing (-e). Use yellow in both.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:34 +0000 (15:08 -0600)]
buildman: Test the output with --list-error-boards
Add a test to cover this flag, which adds the name of each board to each
error/warning line.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:33 +0000 (15:08 -0600)]
buildman: Add a test helper for creating a line prefix
The split/join code is repeated in a lot of places. Add a function to
handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:32 +0000 (15:08 -0600)]
buildman: Split out testOutput() into separate functions
We want to add a few more tests similar to testOutput(). Split its logic
into a function which runs buildman to get the output and another which
checks the output. This will make it easier to reuse the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:31 +0000 (15:08 -0600)]
buildman: Create temp directory in test setup
Rather than having a few tests handle this themselves, create the
temporary directory in the setUp() method and remove it in tearDown().
This will make it easier to add more tests.
Only testOutput and testGit() actually need it, but it doesn't add to the
test time noticeably to do this for all tests in this file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:30 +0000 (15:08 -0600)]
buildman: Use an iterator to check test output
Rather than using the absolute array index, use an interator to work
through the expected output lines. This is easier to follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:29 +0000 (15:08 -0600)]
buildman: Add test coverage for error/warning colour
Buildman should output the right colours for each error/warning line. Some
of these checks are missing. Add them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 9 Apr 2020 21:08:28 +0000 (15:08 -0600)]
buildman: Refactor error-line output int a function
Reduce the amount of repeated code by creating an _OutputErrLines()
function to hold this code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 21 Apr 2020 12:28:13 +0000 (08:28 -0400)]
Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c
i2c changes for 2020.07
- add new i2c driver for Broadcom iproc-based socs
- fix cmd: eeprom: Staticize eeprom_i2c_bus
- i2c: muxes: pca954x: add PCA9546 variant
Tom Rini [Tue, 21 Apr 2020 12:27:56 +0000 (08:27 -0400)]
Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubi
new ubi command for renaming an UBI volume
Tom Rini [Mon, 20 Apr 2020 21:22:47 +0000 (17:22 -0400)]
Merge branch '2020-04-17-master-imports'
- Further cleanups for 'make refcheckdocs'
- Another BTRFS fix.
- Support for automatic decompression of images with booti as well as
unlz4 command for manual decompression.
Tom Rini [Mon, 20 Apr 2020 17:44:27 +0000 (13:44 -0400)]
Merge tag 'u-boot-amlogic-
20200420' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic
- enable DM_RNG on meson boards
- fix SMBIOS info on Odroid-C2
- Fix video output on GXBB/GXL/GXM boards
- add USB gadget support for GXL/GXM boards
Marek Behún [Mon, 30 Mar 2020 16:48:42 +0000 (18:48 +0200)]
fs: btrfs: support sparse extents
When logical address of a regular extent is 0, the extent is sparse and
consists of all zeros.
Without this when sparse extents are used in a file reading fails with
Cannot map logical address 0 to physical
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tom Rini [Mon, 20 Apr 2020 15:14:22 +0000 (11:14 -0400)]
Merge tag 'ti-v2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix boot on am335x guardian board
- Increase OPSI speed on AM65x and J721E devices
- Use JTAD register for identifying K3 devices.
- Update TI entry in MAINTAINERS file.
Tom Rini [Mon, 20 Apr 2020 12:45:27 +0000 (08:45 -0400)]
Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Neil Armstrong [Mon, 30 Mar 2020 09:27:32 +0000 (11:27 +0200)]
configs: libretech-s912-pc: Enable USB gadget with Mass Storage function
Enable configs to support USB gadget and Mass Storage
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:31 +0000 (11:27 +0200)]
configs: libretech-s905d-pc: Enable USB gadget with Mass Storage function
Enable configs to support USB gadget and Mass Storage
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:30 +0000 (11:27 +0200)]
configs: khadas-vim: Enable USB gadget with Mass Storage function
Enable configs to support USB gadget and Mass Storage
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:29 +0000 (11:27 +0200)]
configs: khadas-vim2: Enable USB gadget with Mass Storage function
Enable configs to support USB gadget and Mass Storage
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:28 +0000 (11:27 +0200)]
configs: libretech-ac: Enable USB gadget with Mass Storage function
Enable configs to support USB gadget and Mass Storage
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:27 +0000 (11:27 +0200)]
configs: libretech-cc: Enable USB gadget with Mass Storage function
Enable configs to support USB gadget and Mass Storage
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:26 +0000 (11:27 +0200)]
arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot
Add the USB DWC2 node to u-boot specific dtsi files since Gadget
support is not (yet) available in upstream Linux yet.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:25 +0000 (11:27 +0200)]
arm: meson-gx: add board_usb_init()/cleanup() for USB gadget
Add arch code to initialize USB Gadget mode using the DWC2 controller,
and using the previously added set_mode() phy functions.
[narmstrong: fixup board_usb_cleanup call to phy_meson_gxl_usb2_set_mode]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:24 +0000 (11:27 +0200)]
phy: meson-gxl-usb: add set_mode call to force switch to peripheral mode
Add set_mode function in the Amlogic GXL PHYs that will be called by
the arch code to switch PHYs from/to gadget mode.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong [Mon, 30 Mar 2020 09:27:23 +0000 (11:27 +0200)]
generic-phy: add generic_phy_get_by_node()
Add generic_phy_get_by_node() to get a PHY phandle from a node instead
of a udevice.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[narmstrong: fixed by including ofnode.h in generic-phy.h]
Florinel Iordache [Mon, 16 Mar 2020 13:36:02 +0000 (15:36 +0200)]
t208xqds: add support for backplane kr
Add support for backplane kr on t208xqds: remove board specific fixups
on t208xqds for ethernet interfaces specified in device tree as
supported backplane modes.
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Florinel Iordache [Mon, 16 Mar 2020 13:36:01 +0000 (15:36 +0200)]
lx2160aqds: add support for backplane kr
Add support for backplane kr on lx2160aqds: remove board specific fixups
on lx2160aqds for ethernet interfaces specified in device tree as
supported backplane modes.
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Florinel Iordache [Mon, 16 Mar 2020 13:36:00 +0000 (15:36 +0200)]
ls1046aqds: add support for backplane kr
Add support for backplane kr on ls1046aqds: remove board specific fixups
on ls1046aqds for ethernet interfaces specified in device tree as
supported backplane modes.
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Florinel Iordache [Mon, 16 Mar 2020 13:35:59 +0000 (15:35 +0200)]
phy: add support for backplane kr mode
Add generic support for backplane kr modes currently available:
10gbase-kr, 40gbase-kr4. Remove platform generic fixups
(armv8/layerscape and powerpc) for ethernet interfaces specified
in device tree as supported backplane modes.
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Yinbo Zhu [Tue, 14 Apr 2020 09:24:48 +0000 (17:24 +0800)]
armv8: ls1028a: define esdhc_status_fixup
This patch is to define esdhc_status_fixup function for ls1028a to disable
SDHC1/SDHC2 status in device tree node if not selected.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Heinrich Schuchardt [Sat, 11 Apr 2020 08:57:09 +0000 (10:57 +0200)]
board: fsl: lx2160a: unused variable gic_lpi_base
If the board is configured without CONFIG_GIC_V3_ITS, an error occurs:
board/freescale/lx2160a/lx2160a.c: In function ‘ft_board_setup’:
board/freescale/lx2160a/lx2160a.c:673:6: error: unused variable
‘gic_lpi_base’ [-Werror=unused-variable]
673 | u64 gic_lpi_base;
| ^~~~~~~~~~~~
Let's define the variable as __maybe_unused.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Rayagonda Kokatanur [Wed, 8 Apr 2020 05:42:27 +0000 (11:12 +0530)]
drivers: i2c: add brcm iproc I2C driver support
Add I2C driver support for Broadcom iproc-based socs.
Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Marek Vasut [Tue, 7 Apr 2020 11:29:04 +0000 (13:29 +0200)]
cmd: eeprom: Staticize eeprom_i2c_bus
The eeprom_i2c_bus is not used outside of this file, make it static.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Chris Packham [Wed, 1 Apr 2020 02:55:27 +0000 (15:55 +1300)]
i2c: muxes: pca954x: add PCA9546 variant
This adds the PCA9546 4-channel i2c bus switch.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Heiko Schocher <hs@denx.de>
Philippe Reynes [Mon, 23 Mar 2020 18:20:47 +0000 (19:20 +0100)]
cmd: ubi: add a command to rename volume
This commit adds the command ubi rename to rename an ubi volume.
The format of the command is: ubi rename <oldname> <newname>.
To enable this command, the option CMD_UBI_RENAME must be selected.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lokesh Vutla [Fri, 17 Apr 2020 08:13:53 +0000 (13:43 +0530)]
arm: mach-k3: Use JTAD_ID register for device identification
JTAG ID register is defined by IEEE 1149.1 for device identification.
Use this JTAG ID register for identifying AM65x[0] and J721E[1] devices
instead of using SoC specific registers.
[0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
[1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Giulio Benetti [Tue, 18 Feb 2020 19:02:55 +0000 (20:02 +0100)]
Add support for i.MXRT1020-EVK board
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Giulio Benetti [Tue, 18 Feb 2020 19:02:54 +0000 (20:02 +0100)]
dt-bindings: pinctrl: add i.MXRT1020 pins definition
Add i.MXRT1020 pins definition.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Giulio Benetti [Tue, 18 Feb 2020 19:02:53 +0000 (20:02 +0100)]
ARM: dts: imxrt1020: add dtsi file
Add dtsi file for i.MXRT1020.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Giulio Benetti [Tue, 18 Feb 2020 19:02:52 +0000 (20:02 +0100)]
Add i.MXRT1020 support
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Giulio Benetti [Tue, 18 Feb 2020 19:02:51 +0000 (20:02 +0100)]
clk: imx: add i.IMXRT1020 clk driver
Add i.MXRT1020 clk driver support.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Wed, 26 Feb 2020 11:37:02 +0000 (12:37 +0100)]
imx: pmic: Set proper pmic name for iMX53 HSC|DDC boards
After the
commit
4213609cc7fb ("drivers: core: use strcmp when find device by name")
the exact DTS node name for PMIC device must be provided.
This patch fixes this issue by providing full DTS node name ('mc34708@8').
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chug <jh80.chung@samsung.com>
Lukasz Majewski [Wed, 26 Feb 2020 11:37:01 +0000 (12:37 +0100)]
config: imx: Enable CONFIG_PHY_FIXED on HSC and DDC i.MX53 boards
The CONFIG_PHY_FIXED is necessary to allow DSA switch work in U-Boot after
the
commit
3bf135b6c367 ("drivers: net: phy: Ignore PHY ID 0 during PHY probing").
This particular device - LAN9303 - returns phy_id == 0. With
CONFIG_PHY_FIXED enabled HSC and DDC boards work again with the same U-Boot
binary.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Wed, 26 Feb 2020 11:37:00 +0000 (12:37 +0100)]
dts: imx: Add fixed-link property to HSC and DDC (imx53) devices
Those two boards are supposed to be run with a single u-boot binary.
There are notable differences though - HSC uses DSA switch (which
phy_id == 0x0) and DCC (DP83848C).
After the commit
3bf135b6c367
("drivers: net: phy: Ignore PHY ID 0 during PHY probing") the PHY devices
with phy_id == 0 are not created in U-Boot anymore. This caused regression
on HSC.
To fix this problem - the fec's 'fixed-link' node has been introduced and
the phy_id is not assessed anymore. This approach works on both boards.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Harald Seiler [Thu, 16 Apr 2020 08:52:19 +0000 (10:52 +0200)]
ARM: imx6: DHCOM i.MX6 PDK: Fix usb-otg VBUS regulator
During the conversion of this board to DM_REGULATOR, usb-mass-storage
was broken and started failing with the following error:
=> ums 0 mmc 2
UMS: LUN 0, dev 2, hwpart 0, sector 0x0, count 0xe90000
Error enabling VBUS supply
g_dnl_register: failed!, error: -38
g_dnl_register failed
Fix this by adding the relevant GPIO to the regulator node.
Fixes:
4ca99fe81aea ("ARM: imx: dh-imx6: Enable DM regulator")
Signed-off-by: Harald Seiler <hws@denx.de>
Harald Seiler [Wed, 15 Apr 2020 18:04:53 +0000 (20:04 +0200)]
ARM: imx6: DHCOM i.MX6 PDK: Convert to DM_ETH
Use DM_ETH instead of legacy networking. Add VIO as a fixed regulator
to the relevant device-trees and augment the FEC node with properties
for the reset GPIO.
It should be noted that the relevant properties for the reset GPIO
already exist in the PHY node (reset-gpios, reset-delay-us,
reset-post-delay-us) but U-Boot currently ignores those and only
supports the bus-level reset properties in the FEC node
(phy-reset-gpios, phy-reset-duration, phy-reset-post-delay).
Signed-off-by: Harald Seiler <hws@denx.de>
Fabio Estevam [Fri, 17 Apr 2020 12:27:13 +0000 (09:27 -0300)]
wandboard: Print the board version in board_late_init()
Since CONFIG_DISPLAY_BOARDINFO_LATE is no longer used, the checkboard()
function is no longer called.
As it is useful to print the board revision, print it inside
board_late_init() instead.
Also, to avoid GPIO errors related to using a GPIO without requesting it,
move the gpio_request(REV_DETECTION, "REV_DETECT") call prior to its
usage.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Fabio Estevam [Fri, 17 Apr 2020 12:27:12 +0000 (09:27 -0300)]
wandboard: Remove CONFIG_DISPLAY_BOARDINFO_LATE
Since we are using revD1 device tree for all board revisions, the
following can be seen on a revB1 board:
Model: Wandboard i.MX6 Quad Board revD1
Board: Wandboard rev B1
To avoid such confusing messages, disable CONFIG_DISPLAY_BOARDINFO_LATE.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Fabio Estevam [Fri, 17 Apr 2020 12:27:11 +0000 (09:27 -0300)]
wandboard: Do not print error when PMIC is not present
On wandboard variants prior to revD1, there is no PMIC populated, so
do not print an error when the reading of the device ID register fails.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Fabio Estevam [Fri, 17 Apr 2020 12:27:10 +0000 (09:27 -0300)]
pmic: pfuze100: Change error message level to debug
In some cases U-Boot runs the same binary on different board versions.
In wandboard, for example, there are versions with the PFUZE100 PMIC
populated and others without it.
When the PMIC is not present, it is not really useful to get PMIC error,
so change the error message level to debug instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Fabio Estevam [Fri, 17 Apr 2020 12:27:09 +0000 (09:27 -0300)]
wandboard: Fix version detection for mx6q/mx6dl revD1
The detection of the revD1 version is based on the presence of the PMIC.
Currently revb1 device trees are used for mx6q/mx6dl variants, which
do not have the PMIC nodes.
This causes revD1 boards to be incorrectly be detected as revB1.
Fix this issue by using the revd1 device trees, so that the PMIC node can be
found and then the PMIC can be detected by reading its register ID.
Imported the revd1 device trees from mainline kernel version 5.7-rc1.
Reported-by: Heiko Schocher <hs@denx.de>
Reported-by: Derek Atkins <derek@ihtfp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Derek Atkins <derek@ihtfp.com>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Giulio Benetti [Wed, 8 Apr 2020 15:11:08 +0000 (17:11 +0200)]
configs: imxrt1050-evk: temporary disable DCACHE
mxsfb needs a dcache function not implemented in cortex-M7, so for the
moment let's keep dcache not enabled.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:11:07 +0000 (17:11 +0200)]
configs: imxrt1050-evk: enable video support/console
Enable DM_VIDEO subsystem and its BACKLIGHT_GPIO. Then enable
SYS_WHITE_ON_BLACK to have classic black background on display. Need
also to enable CONFIG_SYS_CONSOLE_ENV_OVERWRITE to retrieve
stdin/stdout/stderr from CONFIG_EXTRA_ENV_SETTINGS.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:11:06 +0000 (17:11 +0200)]
arch: arm: dts: imxrt1050-evk: add lcdif node
Add lcdif node and its pinctrl.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:11:05 +0000 (17:11 +0200)]
ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux
Linux doesn't provide skeleton.dtsi file so let's remove its include and
provide #address-cells/size-cells = <1> that were defined in
skeleton.dtsi before.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:21 +0000 (17:10 +0200)]
ARM: dts: i.mxrt1050: add lcdif node
Add lcdif node to SoC.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:20 +0000 (17:10 +0200)]
imxrt1050_evk: add 16bpp video support if video layer enabled
i.MXRT1050 provides mxsfb compatible lcd controller, so let's enable
video mxsfb driver with 16bpp depth if CONFIG_DM_VIDEO is selected since
board has 16bpp only connection.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:19 +0000 (17:10 +0200)]
video: mxsfb: enable setting ENABLE negative polarity
ENABLE signal can now be flipped by writing its bitmask on vdctrl0
register.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:18 +0000 (17:10 +0200)]
video: mxsfb: enable setting PIXDATA on negative edge
DOTCLK signal can now be flipped by writing its bitmask on vdctrl0
register.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:17 +0000 (17:10 +0200)]
video: mxsfb: enable setting VSYNC negative polarity
VSYNC signal can now be flipped by writing its bitmask on vdctrl0
register.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:16 +0000 (17:10 +0200)]
video: mxsfb: enable setting HSYNC negative polarity
HSYNC signal can now be flipped according to display_flags bitmaks by
writing its bitmask on vdctrl0 register.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:15 +0000 (17:10 +0200)]
video: mxsfb: refactor for using display_timings
struct display_timings provides more informations such clock and DE
polarity, so let's refactor the code to use struct display_timings
instead of struct ctfb_res_modes, so we'll become able to get clock and
DE polarity settings and set register according to them in the next patch.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:14 +0000 (17:10 +0200)]
video: mxsfb: add support for i.MXRT
Add support for i.MXRT by adding CONFIG_IMXRT in register structure and
adding .compatible = "fsl,imxrt-lcdif".
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:13 +0000 (17:10 +0200)]
video: mxsfb: add support for DM CLK
Allow using DM CLK instead of mxs_set_lcdclk() so we can avoid to
implement a special function to set lcd clock on i.MXRT.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:12 +0000 (17:10 +0200)]
sunxi: display: use common video_ctfb_mode_to_display_timing()
Since video_ctfb_mode_to_display_timing() has been implemented by moving
sunxi_ctfb_mode_to_display_timing() to video_modes.c and it's meant to be
used by other video subsystem, let's use it instead of local
sunxi_ctfb_mode_to_display_timing().
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:11 +0000 (17:10 +0200)]
videomodes: add helper function to convert from ctfb to display_timing
This function converts from "struct ctf_res_modes" to
"struct display_timing".
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:10 +0000 (17:10 +0200)]
clk: imx: clk-imxrt1050: add set_parent() callback
Need to add set_parent() callback to allow dts assigned-clock-parents to
work so let's add it accordingly.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Giulio Benetti [Wed, 8 Apr 2020 15:10:09 +0000 (17:10 +0200)]
clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL
mxsfb needs PLL5 as source, so let's setup it at its default frequency
specified in RM(650Mhz).
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:08 +0000 (17:10 +0200)]
clk: imx: clk-imxrt1050: fix typo in clock name "video:"
"video:" must be "video", ":" is a typo.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Giulio Benetti [Wed, 8 Apr 2020 15:10:07 +0000 (17:10 +0200)]
clk: imx: pllv3: add enable_bit
pllv3 PLLs have powerdown/up bits but enable bits too. Specifically
"enable bit" enable the pll output, so when dis/enabling pll by
setting/clearing power_bit we must also set/clear enable_bit.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:25 +0000 (12:28 +0200)]
colibri_imx6: enable relocation of fdt and initrd
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF)
from default environment which prevents relocation of FDT and initrd.
Rely on 'bootm_size' value instead to safely relocate kernel, device tree and
initrd.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:24 +0000 (12:28 +0200)]
colibri-imx6ull: enable relocation of fdt and initrd
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF)
from default environment which prevents relocation of FDT and initrd.
Rely on 'bootm_size' value instead to safely relocate kernel, device tree and
initrd.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:23 +0000 (12:28 +0200)]
apalis_imx6: enable relocation of fdt and initrd
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF)
from default environment which prevents relocation of FDT and initrd.
Rely on 'bootm_size' value instead to safely relocate kernel, device tree and
initrd.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:22 +0000 (12:28 +0200)]
colibri_imx7: enable relocation of fdt and initrd
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF)
from default environment which prevents relocation of FDT and initrd.
Rely on 'bootm_size' value instead to safely relocate kernel, device tree and
initrd.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:21 +0000 (12:28 +0200)]
colibri_vf: enable relocation of fdt and initrd
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF)
from default environment which prevents relocation of FDT and initrd.
Rely on 'bootm_size' value instead to safely relocate kernel, device tree and
initrd.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:20 +0000 (12:28 +0200)]
verdin-imx8mm: add nfsboot wrapper to env
Add nfsboot wrapper to env to boot Linux kernel from TFTP/NFS.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:19 +0000 (12:28 +0200)]
imx8mm_evk: adjust dram size in case bl32 is used
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty),
so during MMU initialization U-Boot won't touch this mem area.
BL32 is loaded to the end of DRAM, bl32 payload size is read from
rom_pointer[1]. This relates to the issue described in
59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Fri, 27 Mar 2020 10:28:18 +0000 (12:28 +0200)]
verdin-imx8mm: adjust dram size in case bl32 is used
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty),
so during MMU initialization U-Boot won't touch this mem area.
BL32 is loaded to the end of DRAM, bl32 payload size is read from
rom_pointer[1]. This relates to the issue described in
59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
projects / oweals / u-boot.git / log