examples/inittab: fix a few incorrect statements about init

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

lineedit: \W on "/bin" should show "bin", not "/bin"

function                                             old     new   delta
parse_and_put_prompt                                 793     785      -8

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

lineedit: implement \T \t \A \@ prompts escapes, fix \W escape, drop \!

function                                             old     new   delta
parse_and_put_prompt                                 742     793     +51
read_line_input                                     3836    3826     -10

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libbb: introduce and use strftime_[YYYYMMDD]HHMMSS()

function                                             old     new   delta
strftime_fmt                                           -      53     +53
strftime_YYYYMMDDHHMMSS                                -      12     +12
strftime_HHMMSS                                        -      12     +12
human_time                                            44      43      -1
fmtstr_t                                               9       -      -9
step_time                                            361     345     -16
watch_main                                           261     232     -29
------------------------------------------------------------------------------
(add/remove: 3/1 grow/shrink: 0/3 up/down: 77/-55)             Total: 22 bytes
   text    data     bss     dec     hex filename
 919203     932   17692  937827   e4f63 busybox_old
 919209     932   17692  937833   e4f69 busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

lineedit: add handling of \H in prompt

Based on the patch by Arnaud Rébillout <rebillout@syscom.ch>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hexdump: need to use xstrtoull for off_t

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hexdump: don't unconditionally limit the usable address range

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

man: install to /usr/bin, not /sbin

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

httpd: don't allow tabs and multiple spaces in request string

HTTP standard doesn't allow it and no sane clients should ever use it.

function                                             old     new   delta
handle_incoming_and_exit                            2795    2785     -10

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

setserial: Fix typo: s/baund_rate/baud_rate/g

as noted by Christoph Handel opensource at macht-blau.org

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>

sendmail: code shrink on top of previous patches

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: don't add multiple To: headers

When adding To: header, add only a single header. If there are multiple
addresses, make it multiline.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: don't add To: header if it already exists

If the message we are sending already has To: header, don't add a new one.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: support long header fields for recipients

Support long header fields in To:, Cc: and Bcc: headers.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: support address lists

Headers To:, Cc: and Bcc: may have a list of comma-separated
addresses. Add support for that. Commas inside double quotes are ignored.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: support addresses inside angle brackets

When we extract addresses from the e-mail, try to first check for an
address inside angle brackets.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: don't mangle e-mail headers

Leave the original To: and Cc: headers untouched, when we try to extract
addresses from them.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: avoid sending mail to wrong addresses

If we get an address we cannot parse properly, we currently just strip
the unknown characters and still try to send it. This is considered
harmful as the resulting address may still be valid but different from
what the user originally intended.

Instead, skip sending to an address we cannot fully understand and
print the characters what we have scanned so far. Leading and trailing
whitespace is allowed and silently stripped.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

mkfs_minix: use get_volume_size_in_bytes instead of local version

Hopefully this also closes 4730

function                                             old     new   delta
valid_offset                                          55       -     -55
mkfs_minix_main                                     2925    2674    -251
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-306)           Total: -306 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

mdev: fix build failure

The error was "error: 'struct globals' has no member named 'parser'"

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

nc: fix build failure ("subscripted value is neither array nor pointer")

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ash: add comment about failures in source builtin. No code changes.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hush: source builtin should override $N only if it has args

function                                             old     new   delta
builtin_source                                       174     184     +10

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ash: read $HOME/.profile instead of $(pwd)/.profile

ash --login should read ~/.profile instead of .profile in the current
directory. I noticed it while trying to figure out why /root/.profile
is only read sometimes.

function                                             old     new   delta
ash_main                                            1374    1398     +24

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ash: move code to allow setting $HOME in /etc/profile

move HISTFILE=$HOME/.ash_history below reading /etc/profile,
so that /etc/profile can set $HOME. HOME can be unset when
directly invoking ash --login from init without going through
getty.

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

vi: code shrink

function                                             old     new   delta
status_line_bold_errno                                 -      32     +32
colon                                               2891    2873     -18
file_insert                                          354     313     -41
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/2 up/down: 32/-59)            Total: -27 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

vi: fix adjustment of buffer on partial file read

The second argument to text_hole_delete was incorrect: it should
be a pointer to the end of the hole.

Signed-off-by: Ron Yorston <rmy@tigress.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sysklogd: trim help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

traceroute: free some memory allocated by xzalloc()

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

flash_eraseall: implement -N

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

nanddump: fix build if nandwrite isn't enabled

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ping[6]: accept and ignore -n. Code shrink

function                                             old     new   delta
print_stats_and_exit                                 270     232     -38

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

udhcpd: also add -I ADDR to help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

udhcpd: add -I LOCAL_ADDR option

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

awk: Fix handling of functions with empty body

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>

losetup: fix util-linux compatibility

Added -a support. Also made sure -f works as follows:

losetup [-r] [-o offset] {-f|loopdev} file

Removed support for 'losetup -r' with no arguments.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

readlink: note that our -f is really -e

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

readlink: uClibc supports automatic allocation too now

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

platform: use KERNEL_VERSION to simplify uClibc version checking

This makes reading the logic (as well as adding new code) a lot simpler,
and fixes one or two cases that were broken due to incorrect sub-version
tests.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

udhcpc: use readlink rather than realpath

The realpath utility requires all paths exist when canonicalizing
symlinks.  If /etc/resolv.conf points to a tmpfs, then it might
not exist initially.  Use `readlink -f` so that we follow all
symlinks that are available.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

hostid: do not output sign-extended host id. Closes 6056

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

archival: note implicit dependencies between lzop & bbunzip

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

decompress_unlzma: move function, no code changes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

decompress_unlzma: 10% speedup in "small" code

   text    data     bss     dec     hex filename
   1796       0       0    1796     704 decompress_unlzma.o
   1801       0       0    1801     709 decompress_unlzma.o

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

decompress_unlzma: make "fast" version a bit smaller

It is not slower. In fact it seems a tiny bit faster too.

   text    data     bss     dec     hex filename
   2827       0       0    2827     b0b decompress_unlzma.o
   2797       0       0    2797     aed decompress_unlzma.o

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

lzop: fiq -q and OPTION_DECOMPRESS mismatch

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

bbunzip: fix order of flags vs bit defines

Too much code shuffling.

Reported-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

bbunzip: ignore the -q flag with the decompressors

The -q flag is used in shell scripts for suppressing output.
Have our applets swallow the flag for compatibility.

Reported-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

ifupdown: support "source" stanza in /etc/network/interfaces

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

zcat: fix "zcat FILE" trying to do detection twice

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

zcat: if seamless uncompressors are defined, autodetect file's format

function                                             old     new   delta
bbunpack                                             526     622     +96
packed_usage                                       29335   29341      +6
gunzip_main                                           64      67      +3

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

fix error message on failure to oen /dev/null; fix zcat's help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

code shrink in check_errors_in_children()

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

pgrep: fix a "missing closing paren" build error

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ifplugd: make -k send SIGINT, not SIGQUIT

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

pgrep: fix -x option

Because when -x is used (exact match), then we cannot compile the
regular expression with REG_NOSUB. The manual page regcomp(3) states
in section "Byte offsets":

    Unless REG_NOSUB was set for the compilation of the pattern
    buffer, it is possible to obtain substring match addressing
    information.

The problem was detected on an ARM system with glibc 2.16.
Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

Fix config help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

make --help return exitcode 0. Closes 5612

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

run-parts: fix unicode creep in --help

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

nc_bloaty: support -ll and -lk. Closes 2245

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

nc: don't redirect stderr to network in -e PROG mode

This in incompatible with nc-1.10, but makes a lot of sense.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

nameif: fix use-after-free in ENABLE_FEATURE_CLEAN_UP code

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

run-parts: stop providing incompatible short options

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

run-parts: add --exit-on-error | -e support

The "big" run-parts supports a handy --exit-on-error to stop execution on
errors, so lets support it as well.

Upstream doesn't have a short option for it, but I've used '-e' for busybox.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: fix put_unaligned_{l,b}e32

Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

lineedit: initialize delptr

In vi mode, the 'p' and 'P' commands caused a segfault when nothing had
been put in the buffer yet because the delptr was not initialized.

Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: support concatenated .xz streams

function                                             old     new   delta
xz_dec_reset                                           -      77     +77
unpack_xz_stream                                    2402    2397      -5

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: mention xzminidec.c in README

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: fix incorrect XZ_BUF_ERROR

xz_dec_run() could incorrectly return XZ_BUF_ERROR if
all of the following was true:

  - The caller knows how many bytes of output to expect
    and only provides that much output space.

  - When the last output bytes are decoded, the
    caller-provided input buffer ends right before
    the LZMA2 end of payload marker. So LZMA2 won't
    provide more output anymore, but it won't know it
    yet and thus won't return XZ_STREAM_END yet.

  - A BCJ filter is in use and it hasn't left any
    unfiltered bytes in the temp buffer. This can happen
    with any BCJ filter, but in practice it's more likely
    with filters other than the x86 BCJ.

This fixes <https://bugzilla.redhat.com/show_bug.cgi?id=735408>
where Squashfs thinks that a valid file system is corrupt.
Thanks to Jindrich Novy for telling me that such a bug report
exists, Phillip Lougher for providing excellent debug info,
and other people on #fedora-ppc.

This also fixes a similar bug in single-call mode where the
uncompressed size of a XZ Block using BCJ + LZMA2 was 0 bytes
and caller provided no output space. Many empty .xz files
don't contain any Blocks and thus don't trigger this bug.

This also tweaks a closely related detail: xz_dec_bcj_run()
could call xz_dec_lzma2_run() to decode into temp buffer when
it was known to be useless. This was harmless although it
wasted a minuscule number of CPU cycles.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: fix decoding of LZMA2 streams having no uncompressed data.

No .xz encoder creates files with empty LZMA2 streams,
but such files would still be valid and decompressors
must accept them.

Note that empty .xz files are a different thing than
empty LZMA2 streams. This bug didn't affect typical .xz
files that had no uncompressed data.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

cz: add C++ support to xz.h

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: remove an empty line from xz_dec_lzma2.c

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: make bcj_x86_test_msbyte() an inline function

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: add a comment about using uint32_t as vli_type

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: avoid "NOTE:" in xz.h

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: update README

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

xz: omit explicit \0 from HEADER_MAGIC

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

Fix move_to_unaligned16

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

mdev: improve $SEQ handling; improve debug logging

Sequential run of concurrent mdev's was too simplistic:
they waited for /dev/mdev.seq to match. This could sometimes
cause cumulative loss of time on the order of a second.

Added SIGCHLD signaling from exiting mdev to all other mdev's.
Added debugging required to see that code actually works as intended.

Example of /dev/mdev.log (with "woken up" elevated from dbg lvl 3 to 2):

mdev[1023]: first seq written
     ^^^^ seq, not pid
mdev[1023]: 35.022395 ACTION:add SUBSYSTEM:module DEVNAME:(null) DEVPATH:/module/lib80211
mdev[1023]: rule matched, line -1
                          ^^^^^^^ means "default rule"
mdev[1023]: 35.022676 exiting
            ^^^^^^^^^ second,usec timestamp
mdev[1024]: 35.069691 ACTION:add SUBSYSTEM:vc DEVNAME:vcs9 DEVPATH:/devices/virtual/vc/vcs9
mdev[1024]: dev 7,9
mdev[1025]: 35.069889 waiting for '1024'
mdev[1026]: 35.069946 waiting for '1024'
mdev[1027]: 35.070151 waiting for '1024'
mdev[1024]: rule matched, line -1
mdev[1024]: mknod vcs9 (7,9) 20660 0:0
mdev[1024]: 35.070346 exiting
mdev[1025]: woken up
mdev[1026]: woken up
mdev[1025]: 35.071213 ACTION:add SUBSYSTEM:vc DEVNAME:vcsa9 DEVPATH:/devices/virtual/vc/vcsa9
            ^^^^^^^^^ took only a millisecond to start running after prev mdev exited
mdev[1025]: dev 7,137
mdev[1027]: woken up
mdev[1025]: rule matched, line -1
mdev[1025]: mknod vcsa9 (7,137) 20660 0:0
mdev[1025]: 35.072109 exiting

function                                             old     new   delta
mdev_main                                            849    1372    +523
curtime                                                -      59     +59
dirAction                                             87     134     +47
static.ts                                              -       8      +8
keywords                                              19      12      -7
make_device                                         2189    2119     -70

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

udhcpc: tweak math shell style with the metric var

Some shells (like dash) are lame and omit the POSIX increment/decrement
feature (because it is listed as optional).  Tweak the shell script to
work in all POSIX variants.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

udhcpc: support resolv.conf symlinks

Often it is desirable to have /etc/ be on read-only storage (well, the
whole rootfs) but have things like /etc/resolv.conf be symlinks to a
writable location.  Tweak the simple script to support that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

mdev: add environment variable match

function                                             old     new   delta
make_device                                         1998    2189    +191
clean_up_cur_rule                                     61      96     +35
dirAction                                             75      87     +12
mdev_main                                            838     849     +11
packed_usage                                       29272   29273      +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 250/0)             Total: 250 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

move endofname() to libbb

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

tail: make help text for -n +N syntax more correct

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

head: support -n -NUM and -c -NUM

function                                             old     new   delta
head_main                                            406     832    +426
packed_usage                                       29234   29252     +18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 444/0)             Total: 444 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

head,tail: use common suffix struct. simplify help text.

function                                             old     new   delta
head_tail_suffixes                                     -      32     +32
head_main                                            415     406      -9
packed_usage                                       29252   29234     -18
tail_suffixes                                         32       -     -32
head_suffixes                                         32       -     -32
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 0/2 up/down: 32/-91)            Total: -59 bytes
   text    data     bss     dec     hex filename
 890474     497    7584  898555   db5fb busybox_old
 890415     497    7584  898496   db5c0 busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

rpm: unmap rpm file before working with next one

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

rpm: stop using statics; move main() to the end of the source file

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

rpm: use "create+rename" method of replacing existing files

Users were reporting getting errors like
"ls: error while loading shared libraries: libc.so.6: ELF load command past end of file"
while rpm was unpacking glibc tarball.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

rpm: make -ql display more compatible; improve help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

fdisk_sun: fix partition alignment

When the display unit is sectors, the partition alignment will convert
the partition start to a wrong unit (it should always be in sectors). Fix
this.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

fdisk_sun: fix corrupted partition data with blank disk

After creating Sun disk label for the first time for a blank disk,
the partition table appears corrupted because current_label_type will
never get set to a proper type. Fix this by calling check_sun_label()
after BusyBox has created the label.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

vasprintf: return -1 on strdup failure

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

vasprintf: do not use xmalloc, it will deadlock on OOM

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

mdev: chdir back to /dev after trying to read firmware

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

arp: code shrink

function                                             old     new   delta
packed_usage                                       29257   29252      -5
arp_main                                            1487    1471     -16

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

arp: fix -H/-t handling.

While at it, shrank code.
function                                             old     new   delta
arp_main                                            1558    1487     -71

Signed-off-by: Kuleshov Aleksey <rndfax@yandex.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

mdev: extend debug logging output

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

udhcpc6: fix port numbers used if !FEATURE_UDHCP_PORT

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

testsuite/du/du-k-works: fix false positive

Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>