Prevent over long nonces in ChaCha20-Poly1305

ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for
every encryption operation. RFC 7539 specifies that the nonce value (IV)
should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and
front pads the nonce with 0 bytes if it is less than 12 bytes. However it
also incorrectly allows a nonce to be set of up to 16 bytes. In this case
only the last 12 bytes are significant and any additional leading bytes are
ignored.

It is a requirement of using this cipher that nonce values are unique.
Messages encrypted using a reused nonce value are susceptible to serious
confidentiality and integrity attacks. If an application changes the
default nonce length to be longer than 12 bytes and then makes a change to
the leading bytes of the nonce expecting the new value to be a new unique
nonce then such an application could inadvertently encrypt messages with a
reused nonce.

Additionally the ignored bytes in a long nonce are not covered by the
integrity guarantee of this cipher. Any application that relies on the
integrity of these ignored leading bytes of a long nonce may be further
affected.

Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe
because no such use sets such a long nonce value. However user
applications that use this cipher directly and set a non-default nonce
length to be longer than 12 bytes may be vulnerable.

CVE-2019-1543

Fixes #8345

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8406)

apps/openssl.c: avoid memory leaks

The trace API doesn't know that the BIOs we give it, let alone those
we attach to callbacks as 'void *data', need to be cleaned up.  This
must be done in the application.

To ensure this cleanup is done as late as possible, use atexit().

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Add a log about the tracing functionality

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Document the tracing functionality

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Make it possible to trace the trace functionality itself

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt BN_CTX_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt OPENSSL_DEBUG_DECRYPT to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt OPENSSL_POLICY_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt OPENSSL_DEBUG_KEYGEN to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt OPENSSL_DEBUG_PKCS5V2 to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt ENGINE_REF_COUNT_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt ENGINE_TABLE_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt ENGINE_CONF_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt OPENSSL_INIT_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt CIPHER_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Adapt SSL_DEBUG to the new generic trace API

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Make it possible to disable the TRACE API

This disabled the tracing functionality by making functions do
nothing, and making convenience macros produce dead code.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

apps/openssl.c: Adapt to enable tracing output

Use the environment variables OPENSSL_TRACE to determine what's going
to be enabled.  The value of this variables is a comma separated list
of trace and debugging names, which correspond to the trace category
macros defined in include/openssl/trace.h.

For example, setting OPENSSL_DEBUG=TRACE,SSL will enable debugging output
for the types OSSL_TRACE_CATEGORY_TRACE and OSSL_TRACE_CATEGORY_SSL.

This also slightly changes the handling of the prefix method in
apps/apps.c.  This is for the better, as the prefix method pointer was
unneccessarily stored in two places.

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Add generic trace API

The idea is that the application shall be able to register output
channels or callbacks to print tracing output as it sees fit.

OpenSSL internals, on the other hand, want to print thoses texts using
normal printing routines, such as BIO_printf() or BIO_dump() through
well defined BIOs.

When the application registers callbacks, the tracing functionality
sets up an internal BIO that simply forwards received text to the
appropriate application provided callback.

Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)

Make the sparse array code use ossl_uintmax_t as its index rather than size_t.

This should never reduce the range covered and might increase it on some
platforms.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8415)

padlock: generate assembler source for static libraries too

The GENERATE lines for generating the padlock assembler source were
wrongly placed in such a way that they only applied to the shared
library build.

[extended tests]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8412)

Don't write the tick_identity to the session

Sessions must be immutable once they can be shared with multiple threads.
We were breaking that rule by writing the ticket index into it during the
handshake. This can lead to incorrect behaviour, including failed
connections in multi-threaded environments.

Reported by David Benjamin.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8383)

Add advice on setting CXX at the same time as CC

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8370)

Travis: use enable-buildtest-c++

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8370)

Configure: make C++ build tests optional and configurable

Disabled by default

Fixes #8360

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8370)

VMS: fix util/[un]local.com.in to handle attributes

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8382)

testutil: ensure good treatment of argv on non-Unix platforms

From a Unix point of view, some other platform families have certain
quirks.  Windows command prompt doesn't expand globs into actual file
names, so we must do this.  VMS has some oddity with argv pointer size
that can cause crashes if you're not careful (by copying it to a less
surprising pointer size array).

The fixups already exist and are used in the apps/ code.  However, the
testutil code started using the opt routines from apps/ without
including the non-Unix fixups.  This change fixes that.

For VMS' sake, libtestutil gets an app_malloc() shim, to avoid sucking
in all of apps/apps.c.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8381)

VMS: move copy_argc to its own module and make it an aux source

copy_argv was never initialization code.

Make it self-cleaning too.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8381)

Deprecate the "hw" configuration options, make "padlockeng" disablable

The "hw" and "hw-.*" style options are historical artifacts, sprung
from the time when ENGINE was first designed, with hardware crypto
accelerators and HSMs in mind.

Today, these options have largely lost their value, replaced by
options such as "no-{foo}eng" and "no-engine".

This completes the transition by making "hw" and "hw-.*" deprecated,
but automatically translated into more modern variants of the same.

In the process, we get rid of the last regular expression in
Configure's @disablables, a feature that was ill supported anyway.
Also, padlock now gets treated just as every other engine.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8380)

openssl_strerror_r: Fix handling of GNU strerror_r

GNU strerror_r may return either a pointer to a string that the function
stores in buf, or a pointer to some (immutable) static string in which case
buf is unused.

In such a case we need to set buf manually.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8371)

Check for negative return for signature size.Addresses Coverity 1442933

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8392)

Fix seeding from random device w/o getrandom syscall

Use select to wait for /dev/random in readable state,
but do not actually read anything from /dev/random,
use /dev/urandom first.

Use linux define __NR_getrandom instead of the
glibc define SYS_getrandom, in case the kernel headers
are more current than the glibc headers.

Fixes #8215

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8251)

Fix no-ec, no-sm2 and no-sm3

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8372)

Add section order check in util/find-doc-nits

This patch checks if the EXAMPLES section in a pod file is placed
before the RETURN VALUES section.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8338)

Place return values after examples in doc

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8338)

apps/ca.c: only output DER with SPKAC input and when -out is chosen

So say the docs

Fixes #8055

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8368)

The use of the likes of UINT32_MAX requires internal/numbers.h

Found a few more cases.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8366)

Configure: support a few more "make variables" defaulting from env

CFLAGS, CXXFLAGS, CPPFLAGS, LDFLAGS, and LDLIBS

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8325)

.travis.yml: change -std=c89 to -ansi

For C, -ansi is equivalent to -std=c90
For C++, -ansi is equivalent to -std=c++98

We also place -ansi in CPPFLAGS instead of the usual command line config,
to avoid getting it when linking (clang complains)

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8325)

Configuration: divide devteam flags into language specific sets

Some of the devteam flags are not for C++

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8325)

Do buildtests on our public header files with C++ as well

This ensures that we don't mistakenly use C++ keywords anywhere public.

Related to #8313

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8325)

OpenSSL::Util::Pod: allow slashes in names

The names in the NAME section may describe headers, which contain a slash
for OpenSSL headers.  We deal with that by converting slashes to dashes
for the file names.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8286)

Replumbing: Add include/openssl/core.h, initially with core types

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8286)

Implement SSH KDF

SSH's KDF is defined in RFC 4253 in Section 7.2

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7290)

Make the padlock engine build correctly

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8220)

Ensure configured module specific and application specific defines are used

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8220)

Add PADLOCK_ASM to dso_defines rather than lib_defines

Since the padlock code is an engine, the assembler is for a module,
not a library link to when building a program...  there's a
distinction.

Fixes #2311

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8220)

The use of the likes of UINT32_MAX requires internal/numbers.h

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8354)

Fix the default digest algorthm of SM2

Currently SM2 shares the ameth with EC, so the current default digest
algorithm returned is SHA256. This fixes the default digest algorithm of
SM2 to SM3, which is the only valid digest algorithm for SM2 signature.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8186)

Support raw input data in apps/pkeyutl

Some signature algorithms require special treatment for digesting, such
as SM2. This patch adds the ability of handling raw input data in
apps/pkeyutl other than accepting only pre-hashed input data.

Beside, SM2 requries an ID string when signing or verifying a piece of data,
this patch also adds the ability for apps/pkeyutil to specify that ID
string.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8186)

Revert "Configure: stop forcing use of DEFINE macros in headers"

Github PR #8246 provides a better solution to the problem.

This reverts commit f11ffa505f8a9345145a26a05bf77b012b6941bd.

[extended tests]

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8247)

Add BN_native2bn and BN_bn2nativepad, for native BIGNUM import/export

These are a couple of utility functions, to make import and export of
BIGNUMs to byte strings in platform native for (little-endian or
big-endian) easier.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8346)

[test] modernize ecdsatest and extend ECDSA sign KATs

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8314)

Fix trivial typo in EVP_DigestVerifyInit doc

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8319)

Clarify that SSL_shutdown() must not be called after a fatal error

Follow on from CVE-2019-1559

Reviewed-by: Richard Levitte <levitte@openssl.org>

Disable 02-test_errstr.t on msys/mingw as well as MSWin32

There is too high a risk that perl and OpenSSL are linked with
different C RTLs, and thereby get different messages for even the most
mundane error numbers.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8343)

Rearrange the inclusion of curve448/curve448_lcl.h

The real cause for this change is that test/ec_internal_test.c
includes ec_lcl.h, and including curve448/curve448_lcl.h from there
doesn't work so well with compilers who always do inclusions relative
to the C file being compiled.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8334)

(cherry picked from commit f408e2a352b59f2e7aa2160bfb6285725fe88ea7)

Ensure bn_cmp_words can handle the case where n == 0

Thanks to David Benjamin who reported this, performed the analysis and
suggested the patch. I have incorporated some of his analysis in the
comments below.

This issue can cause an out-of-bounds read. It is believed that this was
not reachable until the recent "fixed top" changes. Analysis has so far
only identified one code path that can encounter this - although it is
possible that others may be found. The one code path only impacts 1.0.2 in
certain builds. The fuzzer found a path in RSA where iqmp is too large. If
the input is all zeros, the RSA CRT logic will multiply a padded zero by
iqmp. Two mitigating factors:

- Private keys which trip this are invalid (iqmp is not reduced mod p).
Only systems which take untrusted private keys care.
- In OpenSSL 1.1.x, there is a check which rejects the oversize iqmp,
so the bug is only reproducible in 1.0.2 so far.

Fortunately, the bug appears to be relatively harmless. The consequences of
bn_cmp_word's misbehavior are:

- OpenSSL may crash if the buffers are page-aligned and the previous page is
non-existent.
- OpenSSL will incorrectly treat two BN_ULONG buffers as not equal when they
are equal.
- Side channel concerns.

The first is indeed a concern and is a DoS bug. The second is fine in this
context. bn_cmp_word and bn_cmp_part_words are used to compute abs(a0 - a1)
in Karatsuba. If a0 = a1, it does not matter whether we use a0 - a1 or
a1 - a0. The third would be worth thinking about, but it is overshadowed
by the entire Karatsuba implementation not being constant time.

Due to the difficulty of tripping this and the low impact no CVE is felt
necessary for this issue.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8326)

fix x509 -force_pubkey option to take effect with cert input or self-signing; improve its doc

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8165)

CID 1442838:  API usage errors

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8318)

CID 1442835:  Integer Overflow

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8318)

CID 1442836:  Resource leaks

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8318)

Windows: Call TerminateProcess, not ExitProcess

Ty Baen-Price explains:

> Problem and Resolution:
> The following lines of code make use of the Microsoft API ExitProcess:
>
> ```
> Apps\Speed.c line 335: ExitProcess(ret);
> Ms\uplink.c line 22: ExitProcess(1);
> ```
>
> These function calls are made after fatal errors are detected and
> program termination is desired. ExitProcess(), however causes
> _orderly_ shutdown of a process and all its threads, i.e. it unloads
> all dlls and runs all destructors. See MSDN for details of exactly
> what happens
> (https://msdn.microsoft.com/en-us/library/windows/desktop/ms682658(v=vs.85).aspx).
> The MSDN page states that ExitProcess should never be called unless
> it is _known to be safe_ to call it. These calls should simply be
> replaced with calls to TerminateProcess(), which is what should be
> called for _disorderly_ shutdown.
>
> An example of usage:
>
> ```
> TerminateProcess(GetCurrentProcess(), exitcode);
> ```
>
> Effect of Problem:
> Because of a compilation error (wrong c++ runtime), my program
> executed the uplink.c ExitProcess() call. This caused the single
> OpenSSL thread to start executing the destructors of all my dlls,
> and their objects. Unfortunately, about 30 other threads were
> happily using those objects at that time, eventually causing a
> 0xC0000005 ACCESS_VIOLATION. Obviously an ACCESS_VIOLATION is the
> best case scenario, as I'm sure you can imagine at the consequences
> of undiscovered memory corruption, even in a terminating process.

And on the subject of `TerminateProcess()` being asynchronous:

> That is technically true, but I think it's probably synchronous
> "enough" for your purposes, since a call to TerminateProcess
> suspends execution of all threads in the target process. This means
> it's really only asynchronous if you're calling TerminateProcess one
> some _other_ process. If you're calling TerminateProcess on your own
> process, you'll never return from the TerminateProcess call.

Fixes #2489
Was originally RT-4526

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8301)

Don't restrict the number of KeyUpdate messages we can process

Prior to this commit we were keeping a count of how many KeyUpdates we
have processed and failing if we had had too many. This simplistic approach
is not sufficient for long running connections. Since many KeyUpdates
would not be a particular good DoS route anyway, the simplest solution is
to simply remove the key update count.

Fixes #8068

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8299)

engines/dasync: add explaining comments about AES-128-CBC-HMAC-SHA1

Fixes #7950

It was reported that there might be a null pointer dereference in the
implementation of the dasync_aes_128_cbc_hmac_sha1() cipher, because
EVP_aes_128_cbc_hmac_sha1() can return a null pointer if AES-NI is
not available. It took some analysis to find out that this is not
an issue in practice, and these comments explain the reason to comfort
further NPD hunters.

Detected by GitHub user @wurongxin1987 using the Sourcebrella Pinpoint
static analyzer.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8305)

engines/e_devcrypto: set digest input_blocksize

This restores the behavior of previous versions of the /dev/crypto
engine, in alignment with the default implementation.

Reported-by: Gerard Looije <lglooije@hotmail.com>
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8213)

engines/e_devcrypto: fixes logic in close_devcrypto

Call close(cfd) before setting cfd = -1.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8213)

engines/e_devcrypto.c: fix cipher_ctrl function

This fixes commit c703a80, which had a mistake in cipher_ctrl function.

Move the /dev/crypto session cleanup code to its own function.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8213)

engines/build.info: fix devcrypto MODULES entry

The devcrypto MODULES line was missing the "engine" attribute.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8213)

Fix a grammar nit in CRYPTO_get_ex_new_index.pod

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8303)

Make sure that generated POD files are actually created before we run doc-nits

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8285

Indent with 4

doc-nits says that over needs a parameter

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8285

Fix dasync engine

The aes128_cbc_hmac_sha1 cipher in the dasync engine is broken. Probably
by commit e38c2e8535 which removed use of the "enc" variable...but not
completely.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8291)

SSL_CONF_cmd: fix doc for NoRenegotiation

The option is a flag for Options, not a standalone setting.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8292)

MIPS32R3 provides the EXT instruction to extract bits from
registers. As the AES table is already 1K aligned we can
use it everywhere and speedup table address calculation by
10%. Performance numbers:

decryption         16B       64B      256B     1024B     8192B
-------------------------------------------------------------------
aes-256-cbc   5636.84k  6443.26k  6689.02k  6752.94k  6766.59k bef.
aes-256-cbc   6200.31k  7195.71k  7504.30k  7585.11k  7599.45k aft.
-------------------------------------------------------------------
aes-128-cbc   7313.85k  8653.67k  9079.55k  9188.35k  9205.08k bef.
aes-128-cbc   7925.38k  9557.99k 10092.37k 10232.15k 10272.77k aft.

encryption         16B       64B      256B     1024B     8192B
-------------------------------------------------------------------
aes-256 cbc   6009.65k  6592.70k  6766.59k  6806.87k  6815.74k bef.
aes-256 cbc   6643.93k  7388.69k  7605.33k  7657.81k  7675.90k aft.
-------------------------------------------------------------------
aes-128 cbc   7862.09k  8892.48k  9214.04k  9291.78k  9311.57k bef.
aes-128 cbc   8639.29k  9881.17k 10265.86k 10363.56k 10392.92k aft.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8206)

cfi build fixes in x86-64 ghash assembly

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8281)

Clear BN_FLG_CONSTTIME on BN_CTX_get()

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8253)

Test for constant-time flag leakage in BN_CTX

This commit adds a simple unit test to make sure that the constant-time
flag does not "leak" among BN_CTX frames:

- test_ctx_consttime_flag() initializes (and later frees before
  returning) a BN_CTX object, then it calls in sequence
  test_ctx_set_ct_flag() and test_ctx_check_ct_flag() using the same
  BN_CTX object. The process is run twice, once with a "normal"
  BN_CTX_new() object, then with a BN_CTX_secure_new() one.
- test_ctx_set_ct_flag() starts a frame in the given BN_CTX and sets the
  BN_FLG_CONSTTIME flag on some of the BIGNUMs obtained from the frame
  before ending it.
- test_ctx_check_ct_flag() then starts a new frame and gets a number of
  BIGNUMs from it. In absence of leaks, none of the BIGNUMs in the new
  frame should have BN_FLG_CONSTTIME set.

In actual BN_CTX usage inside libcrypto the leak could happen at any
depth level in the BN_CTX stack, with varying results depending on the
patterns of sibling trees of nested function calls sharing the same
BN_CTX object, and the effect of unintended BN_FLG_CONSTTIME on the
called BN_* functions.

This simple unit test abstracts away this complexity and verifies that
the leak does not happen between two sibling functions sharing the same
BN_CTX object at the same level of nesting.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8253)

test/context_internal_test.c: don't initialize as a separate test

Because test order can be randomized, running foo_init() as a separate
test is unsafe practice.  Instead, we make it possible to call it
multiple times, and call it at the start of each separate test.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8288)

sha/keccak1600.c: subscribe more platforms for "complementing" optimization.

E.g. on MIPS64 it gives >20% improvement...

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8261)

Don't set SNI by default if hostname is not dNS name

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8175)

Fix reference to symbol 'main'.

The AIX binder needs to be instructed that the output will have no entry
point (see AIX' ld manual: -e in the Flags section; autoexp and noentry
in the Binder section).

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8282)

Add a test for interleaving app data with handshake data in TLSv1.3

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/8191)

Don't interleave handshake and other record types in TLSv1.3

In TLSv1.3 it is illegal to interleave handshake records with non handshake
records.

Fixes #8189

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/8191)

Fixup internal documentation

There were some faults that got caught by the updated doc-nits

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8270)

Fix a test ordering issue.

A randomised order causes failure due to unintentional dependencies between
two of the test cases.

[extended tests]

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8279)

util/find-docs-nits: Recognise SPARSE_ARRAY_OF

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8269)

util/find-docs-nits: Extend to handle internal documentation

While we're at it, we also check for names that contain white-space,
as they are invalid.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8269)

cygwin: drop explicit O_TEXT

Cygwin binaries should not enforce text mode these days, just
use text mode if the underlying mount point requests it

CLA: trivial

Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8248)

Conform to proper NAME section format

The NAME section format is comma separated names to the left of the
left of the dash, free form on the right.  If we don't follow that
form, programs like apropos(1) and whatis(1) can't do their job
properly.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8267)

Property: naming and manual clarifiations

- Add a bit more text about that is expected of the user or
  OSSL_METHOD_STOREs.
- Clarify what a method and what a numeric identity are.
- Change all mentions of 'implementation' and 'result' to 'method'.

To clarify further: OpenSSL has used the term 'method' for structures
that mainly contains function pointers.  Those are the methods that
are expected to be stored away in OSSL_METHOD_STOREs.  In the end,
however, it's the caller's responsibility to define exactly what they
want to store, as long as its 'methods' are associated with a numeric
identity and properties.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8265)

Don't leak EVP_KDF_CTX on error

Found by Coverity

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8260)

generated files

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8224)

Properties for implementation selection.

Properties are a sequence of comma separated name=value pairs.  A name
without a corresponding value is assumed to be a Boolean and have the
true value 'yes'.  Values are either strings or numbers.  Strings can be
quoted either _"_ or _'_ or unquoted (with restrictions).  There are no
escape characters inside strings.  Number are either decimal digits or
'0x' followed by hexidecimal digits.  Numbers are represented internally
as signed sixty four bit values.

Queries on properties are a sequence comma separated conditional tests.
These take the form of name=value (equality test), name!=value (inequality
test) or name (Boolean test for truth).  Queries can be parsed, compared
against a definition or merged pairwise.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8224)

Add missing dots in dgst man page

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #8142

Fixed typo

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #8121

Check for unpaired .cfi_remember_state

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8109

Fix some CFI issues in x86_64 assembly

The add/double shortcut in ecp_nistz256-x86_64.pl left one instruction
point that did not unwind, and the "slow" path in AES_cbc_encrypt was
not annotated correctly. For the latter, add
.cfi_{remember,restore}_state support to perlasm.

Next, fill in a bunch of functions that are missing no-op .cfi_startproc
and .cfi_endproc blocks. libunwind cannot unwind those stack frames
otherwise.

Finally, work around a bug in libunwind by not encoding rflags. (rflags
isn't a callee-saved register, so there's not much need to annotate it
anyway.)

These were found as part of ABI testing work in BoringSSL.

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8109

[test] unit test for field_inv function pointer in EC_METHOD

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8254)

SCA hardening for mod. field inversion in EC_GROUP

This commit adds a dedicated function in `EC_METHOD` to access a modular
field inversion implementation suitable for the specifics of the
implemented curve, featuring SCA countermeasures.

The new pointer is defined as:
`int (*field_inv)(const EC_GROUP*, BIGNUM *r, const BIGNUM *a, BN_CTX*)`
and computes the multiplicative inverse of `a` in the underlying field,
storing the result in `r`.

Three implementations are included, each including specific SCA
countermeasures:
  - `ec_GFp_simple_field_inv()`, featuring SCA hardening through
    blinding.
  - `ec_GFp_mont_field_inv()`, featuring SCA hardening through Fermat's
    Little Theorem (FLT) inversion.
  - `ec_GF2m_simple_field_inv()`, that uses `BN_GF2m_mod_inv()` which
    already features SCA hardening through blinding.

From a security point of view, this also helps addressing a leakage
previously affecting conversions from projective to affine coordinates.

This commit also adds a new error reason code (i.e.,
`EC_R_CANNOT_INVERT`) to improve consistency between the three
implementations as all of them could fail for the same reason but
through different code paths resulting in inconsistent error stack
states.

Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8254)