oweals/openssl.git
8 years agoAdd size limit to X509_NAME structure.
Dr. Stephen Henson [Thu, 28 Apr 2016 11:55:29 +0000 (12:55 +0100)]
Add size limit to X509_NAME structure.

This adds an explicit limit to the size of an X509_NAME structure. Some
part of OpenSSL (e.g. TLS) already effectively limit the size due to
restrictions on certificate size.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoRemove BIO_dummy, it's old cruft
Richard Levitte [Fri, 29 Apr 2016 16:59:20 +0000 (18:59 +0200)]
Remove BIO_dummy, it's old cruft

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoChange 'struct bio_st' in all public header where applicable
Richard Levitte [Fri, 29 Apr 2016 16:57:58 +0000 (18:57 +0200)]
Change 'struct bio_st' in all public header where applicable

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoAdd asn1_mac
Rich Salz [Fri, 29 Apr 2016 16:42:22 +0000 (12:42 -0400)]
Add asn1_mac

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRemove some dead code from EC_GROUP_check()
Matt Caswell [Fri, 29 Apr 2016 14:22:18 +0000 (15:22 +0100)]
Remove some dead code from EC_GROUP_check()

EC_GROUP_check() was obtaining a temporary BIGNUM from the BN_CTX, but
then not using it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoDon't use an uninitialised variable in srp application
Matt Caswell [Fri, 29 Apr 2016 11:17:15 +0000 (12:17 +0100)]
Don't use an uninitialised variable in srp application

The srp application created an uninitialised DB_ATTR object and then
passed it to the load_index function which attempted to read it. A
DB_ATTR object only contains a single field called "unique_subject".
AFAICT this attribute is unused in the SRP case, and therefore it would be
better to pass a NULL DB_ATTR to load_index (which handles that case
gracefully).

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoAvoid a NULL ptr deref if group is not set
Matt Caswell [Fri, 29 Apr 2016 10:44:39 +0000 (11:44 +0100)]
Avoid a NULL ptr deref if group is not set

We should only copy parameters and keys if the group is set. Otherwise
they don't really make any sense. Previously we copied the private key
regardless of whether the group was set...but if it wasn't a NULL ptr
deref could occur. It's unclear whether we could ever get into that
situation, but since we were already checking it for the public key we
should be consistent.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoCheck for a NULL return value from a call to X509_STORE_CTX_new()
Matt Caswell [Fri, 29 Apr 2016 10:29:50 +0000 (11:29 +0100)]
Check for a NULL return value from a call to X509_STORE_CTX_new()

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoCheck for failed malloc in BIO_ADDR_new
Matt Caswell [Fri, 29 Apr 2016 10:27:09 +0000 (11:27 +0100)]
Check for failed malloc in BIO_ADDR_new

BIO_ADDR_new() calls OPENSSL_zalloc() which can fail - but the return
value is not checked.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoThe x509_name_canon function doesn't check for an error return
Matt Caswell [Thu, 28 Apr 2016 16:05:21 +0000 (17:05 +0100)]
The x509_name_canon function doesn't check for an error return

i2d_name_canon can return a negative number on error. We should check it
before continuing.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoMake header signature of CRYPTO_mem_leaks BIO instead of struct bio_st
Paul Kehrer [Fri, 29 Apr 2016 13:52:55 +0000 (08:52 -0500)]
Make header signature of CRYPTO_mem_leaks BIO instead of struct bio_st

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1012)

8 years agoAvoid overflow issues in X509_cmp.
David Benjamin [Thu, 28 Apr 2016 00:02:35 +0000 (20:02 -0400)]
Avoid overflow issues in X509_cmp.

The length is a long, so returning the difference does not quite work.

Thanks to Torbjörn Granlund for noticing.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoMisc tweaks for EBCDIC based on feedback received
Matt Caswell [Fri, 29 Apr 2016 13:46:07 +0000 (14:46 +0100)]
Misc tweaks for EBCDIC based on feedback received

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoFix EBCDIC problem in conf_def.h
Matt Caswell [Fri, 29 Apr 2016 10:03:00 +0000 (11:03 +0100)]
Fix EBCDIC problem in conf_def.h

The non-ascii version of this set of macros ensures that the "a" variable
is inside the expected range. This logic wasn't quite right for the
EBCDIC version.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoFix the tests to work with EBCDIC
Matt Caswell [Fri, 29 Apr 2016 09:56:20 +0000 (10:56 +0100)]
Fix the tests to work with EBCDIC

Most of the tests already pass with EBCIDC but a few were trying to
write into read only memory.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoFix a build error with strict-warnings and CHARSET_EBCDIC
Matt Caswell [Fri, 29 Apr 2016 09:30:05 +0000 (10:30 +0100)]
Fix a build error with strict-warnings and CHARSET_EBCDIC

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoAdd the ability to test EBCDIC builds
Matt Caswell [Fri, 29 Apr 2016 09:19:27 +0000 (10:19 +0100)]
Add the ability to test EBCDIC builds

This adds the define CHARSET_EBCDIC_TEST which enables testing of EBCDIC
code on an ASCII system.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoFix building with -DCHARSET_EBCDIC
Matt Caswell [Thu, 28 Apr 2016 10:34:54 +0000 (11:34 +0100)]
Fix building with -DCHARSET_EBCDIC

Building with -DCHARSET_EBCDIC and using --strict-warnings resulted in
lots of miscellaneous errors. This fixes it.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoVMS: only explicitely translate names in library C files.
Richard Levitte [Thu, 28 Apr 2016 16:18:04 +0000 (18:18 +0200)]
VMS: only explicitely translate names in library C files.

When compiling all other C files, rely on the compiler to
automatically pick up the name translation information from the header
files __DECC_INCLUDE_{PRO,EPI}LOGUE.H.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoVMS: It seems DEC C doesn't handle certain header files quite right
Richard Levitte [Mon, 11 Apr 2016 16:42:52 +0000 (18:42 +0200)]
VMS: It seems DEC C doesn't handle certain header files quite right

With DEC C on VMS, you can use __DECC_INCLUDE_PROLOGUE.H and
__DECC_INCLUDE_EPILOGUE.H to include some DEC C specific features or
pragmas without having to touch the other header files.

It seems, however, that the current version of the compiler requires
the file names to be upcased, or it doesn't handle them quite right.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoAdd aliases for des-ede-ecb and des-ede3-ecb ciphers.
Kirill Marinushkin [Sun, 24 Apr 2016 09:30:08 +0000 (11:30 +0200)]
Add aliases for des-ede-ecb and des-ede3-ecb ciphers.

Currently we can get all block ciphers with
EVP_get_cipherbyname("<alg_name>-<block-mode-name>")
for example, by names "aes-128-ecb" or "des-ede-cbc".
I found a problem with des-ede-ecb and des-ede3-ecb ciphers as
they can be accessed only with names:
EVP_get_cipherbyname("des-ede")
EVP_get_cipherbyname("des-ede3")
It breaks the general concept.

In this patch I add aliases which allow to use names:
EVP_get_cipherbyname("des-ede-ecb")
EVP_get_cipherbyname("des-ede3-ecb")
in addition to the currently used names.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFixed scripts order for generate_crypto_objects target
Kirill Marinushkin [Sun, 24 Apr 2016 00:01:25 +0000 (02:01 +0200)]
Fixed scripts order for generate_crypto_objects target

Script obj_dat.pl depends on file obj_mac.h generated by script objects.pl

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agocrypto/ppccap.c: fix missing declaration warning.
Andy Polyakov [Wed, 27 Apr 2016 13:46:05 +0000 (15:46 +0200)]
crypto/ppccap.c: fix missing declaration warning.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agocrypto/ppccap.c: permit build with no-chacha and no-poly1305.
Andy Polyakov [Wed, 27 Apr 2016 13:42:36 +0000 (15:42 +0200)]
crypto/ppccap.c: permit build with no-chacha and no-poly1305.

RT#4508

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRemove some dead code
Matt Caswell [Thu, 28 Apr 2016 15:47:36 +0000 (16:47 +0100)]
Remove some dead code

Commit e1d9f1ab39eea left some dead code behind. This removes it.

Reviewed-by: Stephen Henson <steve@openssl.org>
8 years agoA call to RSA_set0_key had the arguments in the wrong order
Matt Caswell [Thu, 28 Apr 2016 14:20:52 +0000 (15:20 +0100)]
A call to RSA_set0_key had the arguments in the wrong order

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoClient side CKE processing can double free on error
Matt Caswell [Thu, 28 Apr 2016 14:12:37 +0000 (15:12 +0100)]
Client side CKE processing can double free on error

The tls_client_key_exchange_post_work() frees the pms on error. It also
calls ssl_generate_master_secret() which also free the pms. If an error
occurs after ssl_generate_master_secret() has been called then a double
free can occur.

Reviewed-by: Andy Polyakov <appro@openssl.org>
8 years agoDon't free the BIGNUM passed to BN_mpi2bn
Matt Caswell [Thu, 28 Apr 2016 18:53:08 +0000 (19:53 +0100)]
Don't free the BIGNUM passed to BN_mpi2bn

Commit 91fb42dd fixed a leak but introduced a problem where a parameter
is erroneously freed instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFix a leak in i2b_PVK
Matt Caswell [Thu, 28 Apr 2016 18:49:17 +0000 (19:49 +0100)]
Fix a leak in i2b_PVK

Commit 8e588e28 fixed a leak but introduced a new one.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agomake update
Richard Levitte [Fri, 29 Apr 2016 07:09:46 +0000 (09:09 +0200)]
make update

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoapps/progs.pl: don't make digests disablable by default
Richard Levitte [Fri, 29 Apr 2016 07:08:06 +0000 (09:08 +0200)]
apps/progs.pl: don't make digests disablable by default

Some digest algorithms can't be disabled, don't pretend they can.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoBIO_free should call method->destroy before free'ing member fields
FdaSilvaYY [Thu, 28 Apr 2016 18:13:44 +0000 (20:13 +0200)]
BIO_free should call method->destroy before free'ing member fields

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1007)

8 years agoAdd checks on CRYPTO_new_ex_data return value...
FdaSilvaYY [Tue, 8 Mar 2016 19:11:48 +0000 (20:11 +0100)]
Add checks on CRYPTO_new_ex_data return value...
with some adaptation to new multi-threading API.

Once reference, lock, meth and flag fields are setup,
DSA_free/DH_free can be called directly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/996)

8 years agoAdd checks on CRYPTO_new_ex_data return value
FdaSilvaYY [Sat, 13 Feb 2016 18:29:34 +0000 (19:29 +0100)]
Add checks on CRYPTO_new_ex_data return value

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/996)

8 years agoFix an error code spelling.
FdaSilvaYY [Mon, 4 Apr 2016 18:42:27 +0000 (20:42 +0200)]
Fix an error code spelling.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/952)

8 years agovarious spelling fixes
FdaSilvaYY [Thu, 10 Mar 2016 20:34:48 +0000 (21:34 +0100)]
various spelling fixes

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/952)

8 years agoAdd getters for X509_STORE and X509_OBJECT members
Christian Heimes [Tue, 19 Apr 2016 19:11:30 +0000 (21:11 +0200)]
Add getters for X509_STORE and X509_OBJECT members

OpenSSL 1.1.0-pre5 has made some additional structs opaque. Python's ssl
module requires access to some of the struct members. Three new getters
are added:

int X509_OBJECT_get_type(X509_OBJECT *a);
STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *v);
X509_VERIFY_PARAM *X509_STORE_get0_param(X509_STORE *ctx);

Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agomake update
Viktor Dukhovni [Wed, 27 Apr 2016 18:37:19 +0000 (14:37 -0400)]
make update

Recycling an unused slot.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoImplement X509_STORE_CTX_set_current_cert() accessor
Viktor Dukhovni [Wed, 27 Apr 2016 18:36:48 +0000 (14:36 -0400)]
Implement X509_STORE_CTX_set_current_cert() accessor

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoFix BIO_set_nbio_accept()
Richard Levitte [Thu, 28 Apr 2016 15:39:26 +0000 (17:39 +0200)]
Fix BIO_set_nbio_accept()

The code that implements this control would work when enabling nbio,
but the disabling code needed fixing.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoDon't leak memory on error path in dane_ctx_enable()
Matt Caswell [Wed, 27 Apr 2016 13:22:20 +0000 (14:22 +0100)]
Don't leak memory on error path in dane_ctx_enable()

The function dane_ctx_enable() allocated some memory that it did not
free in an error path.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFree an ASN1_OBJECT in an error path
Matt Caswell [Wed, 27 Apr 2016 13:17:33 +0000 (14:17 +0100)]
Free an ASN1_OBJECT in an error path

The r2i_certpol() function allocates an ASN1_OBJECT but can fail to free
it in an error path.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak an ASN1_OCTET_STRING on error in rsa_cms_encrypt
Matt Caswell [Wed, 27 Apr 2016 13:13:59 +0000 (14:13 +0100)]
Don't leak an ASN1_OCTET_STRING on error in rsa_cms_encrypt

The rsa_cms_encrypt() function allocates an ASN1_OCTET_STRING but can
then fail to free it in an error condition.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFree memory on error in PKCS7_dataFinal()
Matt Caswell [Wed, 27 Apr 2016 13:09:35 +0000 (14:09 +0100)]
Free memory on error in PKCS7_dataFinal()

The PKCS7_dataFinal() function allocates a memory buffer but then fails
to free it on an error condition.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak memory on error in PKCS12_key_gen_uni
Matt Caswell [Wed, 27 Apr 2016 13:06:40 +0000 (14:06 +0100)]
Don't leak memory on error in PKCS12_key_gen_uni

The PKCS12_key_gen_uni() had one error path which did not free memory
correctly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak memory on error in i2b_PVK
Matt Caswell [Wed, 27 Apr 2016 13:00:37 +0000 (14:00 +0100)]
Don't leak memory on error in i2b_PVK

The i2b_PVK function leaked a number of different memory allocations on
error paths (and even some non-error paths).

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak memory on error in b2i_rsa
Matt Caswell [Wed, 27 Apr 2016 12:52:37 +0000 (13:52 +0100)]
Don't leak memory on error in b2i_rsa

The b2i_rsa() function uses a number of temporary local variables which
get leaked on an error path.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak resource on error in OCSP_url_svcloc_new
Matt Caswell [Wed, 27 Apr 2016 12:40:52 +0000 (13:40 +0100)]
Don't leak resource on error in OCSP_url_svcloc_new

On error we could leak a ACCESS_DESCRIPTION and an ASN1_IA5STRING. Both
should be freed in the error path.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoCheck that we were actually allocated BIGNUMs in dsa_builtin_paramgen2
Matt Caswell [Wed, 27 Apr 2016 12:32:58 +0000 (13:32 +0100)]
Check that we were actually allocated BIGNUMs in dsa_builtin_paramgen2

Calls to BN_CTX_get() can fail so we should check that they were
successful.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak EVP_MD_CTX on error path
Matt Caswell [Wed, 27 Apr 2016 12:22:29 +0000 (13:22 +0100)]
Don't leak EVP_MD_CTX on error path

The cms_SignerInfo_content_sign() function allocated an EVP_MD_CTX but
then failed to free it on an error path.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak memory on error in cms_RecipientInfo_pwri_crypt
Matt Caswell [Wed, 27 Apr 2016 12:18:38 +0000 (13:18 +0100)]
Don't leak memory on error in cms_RecipientInfo_pwri_crypt

The cms_RecipientInfo_pwri_crypt() allocated an EVP_CIPHER_CTX but then
failed to free it in some error paths. By allocating it a bit later that
can be avoided.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak memory on error in BN_generate_prime_ex
Matt Caswell [Wed, 27 Apr 2016 11:59:19 +0000 (12:59 +0100)]
Don't leak memory on error in BN_generate_prime_ex

In BN_generate_prime_ex() we do some sanity checks first and return
with an error if they fail. We should do that *before* allocating any
resources to avoid a memory leak.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFree a BIGNUM on error in BN_mpi2bn
Matt Caswell [Wed, 27 Apr 2016 11:55:44 +0000 (12:55 +0100)]
Free a BIGNUM on error in BN_mpi2bn

In the BN_mpi2bn() function, a failure of a call to BN_bin2bn() could
result in the leak of a previously allocated BIGNUM value.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoDon't leak memory on failure to create a mem BIO
Matt Caswell [Wed, 27 Apr 2016 11:52:29 +0000 (12:52 +0100)]
Don't leak memory on failure to create a mem BIO

During construction of a mem BIO we allocate some resources. If this
allocation fails we can end up leaking everything we have allocated so
far.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoClose the accept socket on error
Matt Caswell [Wed, 27 Apr 2016 11:46:51 +0000 (12:46 +0100)]
Close the accept socket on error

When setting an accepted socket for non-blocking, if the operation fails
make sure we close the accepted socket.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoMake BIO_sock_error return a proper error code when getsockopt fails
Richard Levitte [Thu, 28 Apr 2016 11:19:38 +0000 (13:19 +0200)]
Make BIO_sock_error return a proper error code when getsockopt fails

BIO_sock_error() returned 1 when getsockopt() fails when it should
return the error code for that failure.

Additionally, the optlen parameter to getsockopt() has to point at
the size of the area that the optval parameter points at rather than
zero.  Some systems may forgive it being zero, but others don't.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoReject inappropriate private key encryption ciphers.
Dr. Stephen Henson [Sat, 23 Apr 2016 12:33:05 +0000 (13:33 +0100)]
Reject inappropriate private key encryption ciphers.

The traditional private key encryption algorithm doesn't function
properly if the IV length of the cipher is zero. These ciphers
(e.g. ECB mode) are not suitable for private key encryption
anyway.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
8 years agoFix set0 reuse test
Viktor Dukhovni [Wed, 27 Apr 2016 19:08:33 +0000 (15:08 -0400)]
Fix set0 reuse test

We must test for new object == current object, not !=.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFuture proof build_chain() in x509_vfy.c
Viktor Dukhovni [Tue, 26 Apr 2016 18:17:57 +0000 (14:17 -0400)]
Future proof build_chain() in x509_vfy.c

Coverity reports a potential NULL deref when "2 0 0" DANE trust-anchors
from DNS are configured via SSL_dane_tlsa_add() and X509_STORE_CTX_init()
is called with a NULL stack of untrusted certificates.

Since ssl_verify_cert_chain() always provideds a non-NULL stack of
untrusted certs, and no other code path enables DANE, the problem
can only happen in applications that use SSL_CTX_set_cert_verify_callback()
to implement their own wrappers around X509_verify_cert() passing
only the leaf certificate to the latter.

Regardless of the "improbability" of the problem, we do need to
ensure that build_chain() handles this case correctly.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoDocumentation the changed {RSA,DSA,DH}_set0_* functionality change
Richard Levitte [Tue, 26 Apr 2016 11:40:53 +0000 (13:40 +0200)]
Documentation the changed {RSA,DSA,DH}_set0_* functionality change

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoRSA, DSA, DH: Allow some given input to be NULL on already initialised keys
Richard Levitte [Mon, 25 Apr 2016 18:28:54 +0000 (20:28 +0200)]
RSA, DSA, DH: Allow some given input to be NULL on already initialised keys

The diverse {RSA,DSA,DH}_set0_* functions are made to allow some
parameters to be NULL IF the corresponding numbers in the given key
structure have already been previously initialised.  Specifically,
this allows the addition of private components to be added to a key
that already has the public half, approximately like this:

    RSA_get0_key(rsa, NULL, &e, NULL);
    RSA_get0_factors(rsa, &p, &q);
    /* calculate new d */
    RSA_set0_key(rsa, NULL, NULL, d);

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoGH975 Add ex_data functions for X509_STORE
Kazuki Yamaguchi [Tue, 19 Apr 2016 01:22:15 +0000 (10:22 +0900)]
GH975 Add ex_data functions for X509_STORE

Add X509_STORE_{set,get}_ex_data() function and
X509_STORE_get_ex_new_index() macro.

X509_STORE has ex_data and the documentation also mentions them but they
are not actually implemented.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix no-gost no-srp no-ec no-dh.
Ben Laurie [Tue, 19 Apr 2016 07:25:58 +0000 (08:25 +0100)]
Fix no-gost no-srp no-ec no-dh.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix enable-ssl-trace no-nextprotoneg.
Ben Laurie [Mon, 18 Apr 2016 09:45:02 +0000 (10:45 +0100)]
Fix enable-ssl-trace no-nextprotoneg.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix no-engine no-ui.
Ben Laurie [Mon, 18 Apr 2016 09:44:42 +0000 (10:44 +0100)]
Fix no-engine no-ui.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agosplit_send_fragment should always be less than or equal to max_send_fragment
Matt Caswell [Tue, 26 Apr 2016 17:01:24 +0000 (18:01 +0100)]
split_send_fragment should always be less than or equal to max_send_fragment

A bug meant that SSL_CTRL_SET_MAX_SEND_FRAGMENT was not adjusting
split_send_fragment properly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix BIO_CTRL_DUP for an SSL BIO
Matt Caswell [Tue, 26 Apr 2016 16:52:21 +0000 (17:52 +0100)]
Fix BIO_CTRL_DUP for an SSL BIO

The variables in the BIO weren't being duplicated properly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoFix passwd seg fault
Matt Caswell [Tue, 26 Apr 2016 16:00:33 +0000 (17:00 +0100)]
Fix passwd seg fault

Passing the -stdin arg to the passwd command line app *and* supply a
password on the command line causes a seg fault.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoSPARCv9 assembly pack: fine-tune run-time switch.
Andy Polyakov [Mon, 25 Apr 2016 21:17:57 +0000 (23:17 +0200)]
SPARCv9 assembly pack: fine-tune run-time switch.

Reviewed-by: Tim Hudson <tjh@openssl.org>
8 years agocamellia/build.info: fix typo
Andy Polyakov [Mon, 25 Apr 2016 21:24:06 +0000 (23:24 +0200)]
camellia/build.info: fix typo

RT#4520

Reviewed-by: Tim Hudson <tjh@openssl.org>
8 years agoRemove dead-code infinite loop
Benjamin Kaduk [Mon, 18 Apr 2016 17:50:34 +0000 (12:50 -0500)]
Remove dead-code infinite loop

Commit d32f5d8733df9938727710d4194e92813c421ef1 added a 'goto end;' statement
at the end of the code block for the 'end' label.  Fortunately, it was after a
return statement, so no infinite loop occurred, but it is still dead code.

Remove the extra goto statement as cleanup.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoAdd ex_data functions for X509_STORE
Kazuki Yamaguchi [Tue, 19 Apr 2016 01:22:15 +0000 (10:22 +0900)]
Add ex_data functions for X509_STORE

Add X509_STORE_{set,get}_ex_data() function and
X509_STORE_get_ex_new_index() macro.

X509_STORE has ex_data and the documentation also mentions them but they
are not actually implemented.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agoEnsure we check i2d_X509 return val
Matt Caswell [Mon, 25 Apr 2016 15:05:55 +0000 (16:05 +0100)]
Ensure we check i2d_X509 return val

The i2d_X509() function can return a negative value on error. Therefore
we should make sure we check it.

Issue reported by Yuan Jochen Kang.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
8 years ago*.der files are binary.
Dr. Stephen Henson [Tue, 26 Apr 2016 11:57:24 +0000 (12:57 +0100)]
*.der files are binary.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoRemove the never-functional no-sct
Benjamin Kaduk [Wed, 20 Apr 2016 18:51:58 +0000 (13:51 -0500)]
Remove the never-functional no-sct

It was added as part of 2df84dd3299ff25fa078ca7ffbdeaac65b361feb
but has never actually been used for anything; presumably it was
a typo for one of SCTP or CT.

This removes the last '??' entry from INSTALL.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoRemove some OPENSSL_NO_SHA that snuck in
Benjamin Kaduk [Wed, 20 Apr 2016 18:58:25 +0000 (13:58 -0500)]
Remove some OPENSSL_NO_SHA that snuck in

Commit d064e6ab52ac8e7b80b2a5d11b31bca583b769c7 removed all the
OPENSSL_NO_SHA guards, but commit
a50ad1daaa68c109ea1a14225a7aba8660526101 regenerated some due to the
sha entries in the %md_disabler table in apps/progs.pl.

Update %md_disabler to reflect that sha is not disableable, and
remove OPENSSL_NO_SHA for good.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agocrypto/poly1305/asm: chase overflow bit on x86 and ARM platforms.
Andy Polyakov [Fri, 15 Apr 2016 14:30:29 +0000 (16:30 +0200)]
crypto/poly1305/asm: chase overflow bit on x86 and ARM platforms.

Even though no test could be found to trigger this, paper-n-pencil
estimate suggests that x86 and ARM inner loop lazy reductions can
loose a bit in H4>>*5+H0 step.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
8 years agomake update
Viktor Dukhovni [Mon, 25 Apr 2016 19:13:27 +0000 (15:13 -0400)]
make update

And recycle some disused slots.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoAdded missing X509_STORE_CTX_set_error_depth() accessor
Viktor Dukhovni [Mon, 25 Apr 2016 19:02:02 +0000 (15:02 -0400)]
Added missing X509_STORE_CTX_set_error_depth() accessor

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoDocument the enhancements for DEPEND and INCLUDE and use a better example
Richard Levitte [Thu, 21 Apr 2016 19:08:42 +0000 (21:08 +0200)]
Document the enhancements for DEPEND and INCLUDE and use a better example

Reviewed-by: Emilia Käsper <emilia@openssl.org>
8 years agoBuild system: add include directories and dependencies for generators
Richard Levitte [Thu, 21 Apr 2016 12:30:08 +0000 (14:30 +0200)]
Build system: add include directories and dependencies for generators

In the case of generating a file like this:

    GENERATE[foo.S]=mkfoo.pl arg1 arg2

the 'mkfoo.pl' generator itself might need to include other files,
such as perl modules within our source tree.  We can reuse already
existing syntax for it, like this:

    INCLUDE[mkfoo.pl]=module/path

or:

    DEPEND[mkfoo.pl]=modules/mymodule.pm

This change implements the support for such constructs, and for the
DEPEND statement, for any value that indicates a perl module (.pm
file), it will automatically infer an INCLUDE statement for its
directory, just like it does for C header files, so you won't have do
write this:

    DEPEND[mkfoo.pl]=modules/mymodule.pm
    INCLUDE[mkfoo.pl]=modules

Reviewed-by: Emilia Käsper <emilia@openssl.org>
8 years agoFix NULL deref in apps/pkcs7
Rich Salz [Mon, 25 Apr 2016 12:56:54 +0000 (08:56 -0400)]
Fix NULL deref in apps/pkcs7

Thanks to Brian Carpenter for finding and reporting this.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
8 years agoAPI compat macros for renamed X509_STORE_CTX functions
Viktor Dukhovni [Sat, 23 Apr 2016 04:39:20 +0000 (00:39 -0400)]
API compat macros for renamed X509_STORE_CTX functions

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agos390x assembly pack: cache capability query results.
Andy Polyakov [Fri, 15 Apr 2016 14:39:22 +0000 (16:39 +0200)]
s390x assembly pack: cache capability query results.

IBM argues that in certain scenarios capability query is really
expensive. At the same time it's asserted that query results can
be safely cached, because disabling CPACF is incompatible with
reboot-free operation.

Reviewed-by: Tim Hudson <tjh@openssl.org>
8 years agocrypto/sparc_arch.h: reserve more SPARCv9 capability bits.
Andy Polyakov [Sat, 23 Apr 2016 17:10:04 +0000 (19:10 +0200)]
crypto/sparc_arch.h: reserve more SPARCv9 capability bits.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agochacha/asm/chacha-ppc.pl: get misalignment corner case right on big-endian.
Andy Polyakov [Sat, 23 Apr 2016 17:16:56 +0000 (19:16 +0200)]
chacha/asm/chacha-ppc.pl: get misalignment corner case right on big-endian.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix EC_KEY_set_private_key() to call key->group->meth->set_private()
Kazuki Yamaguchi [Thu, 21 Apr 2016 08:35:53 +0000 (17:35 +0900)]
Fix EC_KEY_set_private_key() to call key->group->meth->set_private()

Fix a bug introduced by 6903e2e7e9a4 (Extended EC_METHOD customisation
support., 2016-02-01). key->meth->set_private() is wrongly called where
it should call key->group->meth->set_private().

PR#4517

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
8 years agoadd test for CVE-2016-2109
Dr. Stephen Henson [Fri, 22 Apr 2016 17:44:23 +0000 (18:44 +0100)]
add test for CVE-2016-2109

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoIn d2i_test return error for malloc failure.
Dr. Stephen Henson [Fri, 22 Apr 2016 17:37:42 +0000 (18:37 +0100)]
In d2i_test return error for malloc failure.

Bad ASN.1 data should never be able to trigger a malloc failure so return
an error in d2i_test if a malloc failure occurs.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoHarden ASN.1 BIO handling of large amounts of data.
Dr. Stephen Henson [Mon, 11 Apr 2016 12:57:20 +0000 (13:57 +0100)]
Harden ASN.1 BIO handling of large amounts of data.

If the ASN.1 BIO is presented with a large length field read it in
chunks of increasing size checking for EOF on each read. This prevents
small files allocating excessive amounts of data.

CVE-2016-2109

Thanks to Brian Carpenter for reporting this issue.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoWarn when doing an out-of-source build and finding in-source build artifacts
Richard Levitte [Thu, 21 Apr 2016 16:03:16 +0000 (18:03 +0200)]
Warn when doing an out-of-source build and finding in-source build artifacts

The reason to warn is that configuration *may* pick up on
configuration header files that are in the source tree, that might be
for a wildly different configuration than what is expected in the
current out-of-source configuration.

Reviewed-by: Matt Caswell <matt@openssl.org>
8 years agomake update
Viktor Dukhovni [Fri, 22 Apr 2016 00:06:49 +0000 (20:06 -0400)]
make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoEnabled DANE only when at least one TLSA RR was added
Viktor Dukhovni [Fri, 22 Apr 2016 00:00:58 +0000 (20:00 -0400)]
Enabled DANE only when at least one TLSA RR was added

It is up to the caller of SSL_dane_tlsa_add() to take appropriate
action when no records are added successfully or adding some records
triggers an internal error (negative return value).

With this change the caller can continue with PKIX if desired when
none of the TLSA records are usable, or take some appropriate action
if DANE is required.

Also fixed the internal ssl_dane_dup() function to properly initialize
the TLSA RR stack in the target SSL handle.  Errors in ssl_dane_dup()
are no longer ignored.

Reviewed-by: Rich Salz <rsalz@openssl.org>
8 years agoDon't set peer_tmp until we have finished constructing it
Matt Caswell [Tue, 19 Apr 2016 22:33:35 +0000 (23:33 +0100)]
Don't set peer_tmp until we have finished constructing it

If we fail halfway through constructing the peer_tmp EVP_PKEY but we have
already stored it in s->s3->peer_tmp then if anything tries to use it then
it will likely fail. This was causing s_client to core dump in the
sslskewith0p test. s_client was trying to print out the connection
parameters that it had negotiated so far. Arguably s_client should not do
that if the connection has failed...but given it is existing functionality
it's easier to fix libssl.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoExtensions to d2i_test.
Dr. Stephen Henson [Wed, 20 Apr 2016 20:37:57 +0000 (21:37 +0100)]
Extensions to d2i_test.

Using ASN1_ITEM tables in d2i_test: this then uses consistent names and
makes it easier to extend.

Add bio, reencode and compare tests.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
8 years agoFix capi engine for no-dsa
Matt Caswell [Fri, 22 Apr 2016 11:23:07 +0000 (12:23 +0100)]
Fix capi engine for no-dsa

The capi engine was failing to compile on Windows if the no-dsa option
was selected.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix no-dsa on Windows/VMS
Matt Caswell [Fri, 22 Apr 2016 11:10:19 +0000 (12:10 +0100)]
Fix no-dsa on Windows/VMS

The no-dsa option was failing on Windows because some symbols were not
correctly flagged in libcrypto.num. Problem found due to the new symbol
consistency test.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix the indentation of OPENSSL_NO_STDIO in pem.h
Matt Caswell [Fri, 22 Apr 2016 11:09:49 +0000 (12:09 +0100)]
Fix the indentation of OPENSSL_NO_STDIO in pem.h

Some pre-processor macros were incorrectly indented

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoFix no-cmac on Windows/VMS
Matt Caswell [Fri, 22 Apr 2016 10:47:57 +0000 (11:47 +0100)]
Fix no-cmac on Windows/VMS

no-cmac was failing on Windows/VMS due to libcrypto.num not marking the
CMAC functions properly. Found due to the new symbol consistency test.

Reviewed-by: Richard Levitte <levitte@openssl.org>
8 years agoUnified copyright for test recipes
Rich Salz [Fri, 22 Apr 2016 11:21:51 +0000 (07:21 -0400)]
Unified copyright for test recipes

Reviewed-by: Richard Levitte <levitte@openssl.org>