TsiChungLiew [Fri, 6 Jul 2007 04:29:21 +0000 (23:29 -0500)]
Add mcffec_initialize()
Added mcffec_initialize() in eth_initialize()
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:27:40 +0000 (23:27 -0500)]
Update header file and clean up
Include immap.h
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:23:15 +0000 (23:23 -0500)]
New uart structure and defines
Seperated from mcfuart.h
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:22:31 +0000 (23:22 -0500)]
New timer structure and defines
Seperated from mcftimer.h
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:21:09 +0000 (23:21 -0500)]
Rename mcfrtc to rtc
Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:17:36 +0000 (23:17 -0500)]
Rename mcfserial.c. Update include header
Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:13:58 +0000 (23:13 -0500)]
Header file update, clean up and cache handling
Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:10:40 +0000 (23:10 -0500)]
Create interrupts.c and modify Makefile
interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:06:55 +0000 (23:06 -0500)]
Enable Icache
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:05:31 +0000 (23:05 -0500)]
Update header file and some clean up
Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:03:28 +0000 (23:03 -0500)]
Update header file and enable icache
Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 04:01:22 +0000 (23:01 -0500)]
Update header file and removed interrupt_init()
Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:57:46 +0000 (22:57 -0500)]
Update for flash.o and mii.o
Removed flash.o and added mii.o
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:56:19 +0000 (22:56 -0500)]
MII functions calls.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:54:42 +0000 (22:54 -0500)]
Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
The removed MII routines will be placed in mii.c.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:51:05 +0000 (22:51 -0500)]
Duplicate code
There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:46:38 +0000 (22:46 -0500)]
Seperate old structure defines and new structure defines
Removed new uart structure and defines to uart.h
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:45:01 +0000 (22:45 -0500)]
Seperate old structure defines and new structure defines
New timer structure and defines will move to new timer.h
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:42:23 +0000 (22:42 -0500)]
Clean up
Removed whitespace
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:41:24 +0000 (22:41 -0500)]
Clean up
Replaced whitespace with tabs
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:39:07 +0000 (22:39 -0500)]
Create new header file and move peripherals base address from configs file to new header file.
Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Fri, 6 Jul 2007 03:24:58 +0000 (22:24 -0500)]
Revert file mode
Changed MAKEALL file mode to executable, removed executable file mode from Makefile
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Mon, 18 Jun 2007 18:50:13 +0000 (13:50 -0500)]
Added M5329AFEE and M5329BFEE Platforms
Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
rtc/mcfrtc.c
Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
lib_m68k/time.c, net/eth.c and rtc/Makefile
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Detlev Zundel [Wed, 23 May 2007 17:02:41 +0000 (19:02 +0200)]
Change 'repeatable' attribute of some commands to sensible values.
Most prominently this changes 'erase' to be non-repeatable.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Detlev Zundel [Wed, 23 May 2007 16:47:48 +0000 (18:47 +0200)]
Fix 'run' not to continue after interrupted command
Signed-off-by: Detlev Zundel <dzu@denx.de>
Wolfgang Denk [Fri, 8 Jun 2007 08:24:58 +0000 (10:24 +0200)]
Fix config problems on SC3 board; make ide_reset_timeout work.
Wolfgang Denk [Wed, 6 Jun 2007 14:26:56 +0000 (16:26 +0200)]
Coding Style cleanup; generate new CHANGELOG file.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 6 Jun 2007 14:21:11 +0000 (16:21 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc86xx
Wolfgang Denk [Wed, 6 Jun 2007 14:18:01 +0000 (16:18 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-arm
Stefan Roese [Wed, 6 Jun 2007 09:43:58 +0000 (11:43 +0200)]
Merge ... /home/stefan/git/u-boot/acadia-nand-boot
Stefan Roese [Wed, 6 Jun 2007 09:42:13 +0000 (11:42 +0200)]
ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
This patch adds NAND booting support for the AMCC Acadia eval board.
Please make sure to configure jumper J7 to position 2-3 when booting
from NOR, and to position 1-2 when booting for NAND.
I also added a board command to configure the I2C bootstrap EEPROM
values. Right now only 267MHz is support for booting either via NOR
or NAND FLASH. Here the usage:
=> bootstrap 267 nor ;to configure the board for 267MHz NOR booting
=> bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Loeliger [Tue, 5 Jun 2007 18:29:00 +0000 (13:29 -0500)]
Merge branch 'mpc8641'
Ed Swarthout [Tue, 5 Jun 2007 17:30:52 +0000 (12:30 -0500)]
mpc8641 image size cleanup
e600 does not have a bootpg restriction.
Move the version string to beginning of image at
fff00000.
Resetvec.S is not needed.
Update flash copy instructions.
Add tftpflash env variable
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk [Mon, 4 Jun 2007 20:59:44 +0000 (22:59 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Benoît Monin [Mon, 4 Jun 2007 06:36:05 +0000 (08:36 +0200)]
[PATCH] Fix ppc4xx bootstrap letter displayed on startup
The attached patch is mainly cosmetic, allowing u-boot to
display the correct bootstrap option letter according to the
datasheets.
The original patch was extended with 405EZ support by Stefan
Roese.
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 14:18:17 +0000 (16:18 +0200)]
ppc4xx: Add missing file for Bamboo NAND booting support
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 14:15:34 +0000 (16:15 +0200)]
Merge with /home/stefan/git/u-boot/bamboo-nand
Stefan Roese [Fri, 1 Jun 2007 13:58:19 +0000 (15:58 +0200)]
ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
This patch undoes the patch by Jeff Mann with commit-id
ada4697d. As
suggested by AMCC it is not recommended to dynamically change the EBC
speed after bootup. So we undo this change to be on the safe side.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:29:04 +0000 (15:29 +0200)]
ppc4xx: Update Sequoia NAND booting support with ECC
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:27:11 +0000 (15:27 +0200)]
ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
This patch adds NAND booting support for the AMCC Bamboo eval board.
Since the NAND-SPL boot image is limited to 4kbytes, this version
only supports the onboard 64MBytes of DDR. The DIMM modules can't be
supported, since the setup code for I2C DIMM autodetection and
configuration is too big for this NAND bootloader.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:23:04 +0000 (15:23 +0200)]
NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
The U-Boot NAND booting support is now extended to support ECC
upon loading of the NAND U-Boot image.
Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:19:29 +0000 (15:19 +0200)]
ppc4xx: Prepare Bamboo port for NAND booting support
This patch updates the "normal" Bamboo NOR booting port, so
that it is compatible with the coming soon NAND booting
Bamboo port.
It also enables the 2nd NAND flash on the Bamboo.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:16:58 +0000 (15:16 +0200)]
ppc4xx: Update in_be32() functions and friends to latest Linux version
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:15:12 +0000 (15:15 +0200)]
NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
This patch adds hardware ECC support to the NDFC driver. It also
changes the register access from using the "simple" in32/out32
functions to the in_be32/out_be32 functions, which make sure
that the access is correctly synced. This is the only recommended
access to SoC registers in the current Linux kernel.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:12:15 +0000 (15:12 +0200)]
NAND: Update nand_ecc.c to latest Linux version
This patch updates the nand_ecc code to the latest Linux version.
The main reason for this is the more compact code. This makes
it possible to include the ECC code into the NAND bootloader
image (NAND_SPL) for PPC4xx.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:09:50 +0000 (15:09 +0200)]
ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 11:45:24 +0000 (13:45 +0200)]
ppc4xx: Change Luan config file to support ECC
With the updated 44x DDR2 driver the Luan board now supports
ECC generation and checking.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 11:45:00 +0000 (13:45 +0200)]
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
Add config option for 180 degree advance clock control as needed
for the AMCC Luan eval board.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Thu, 31 May 2007 15:21:22 +0000 (17:21 +0200)]
Merge with /home/wd/git/u-boot/stx-gp3ssa
Wolfgang Denk [Thu, 31 May 2007 15:20:09 +0000 (17:20 +0200)]
Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 27 May 2007 23:11:11 +0000 (01:11 +0200)]
Merge with /home/tur/git/u-boot#motionpro
Bartlomiej Sieka [Sun, 27 May 2007 15:26:46 +0000 (17:26 +0200)]
Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:06:36 +0000 (17:06 +0200)]
Motion-PRO: Add support for redundant environment.
Enable redundant environment, add a MTD partition for it; also add env.
variable command for passing MTD partitions to the kernel command line.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:05:11 +0000 (17:05 +0200)]
Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
Allow passing longer command line to the kernel - useful especially
for passing MTD partition layout.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:04:18 +0000 (17:04 +0200)]
Fix: Add missing NULL termination in strings expanded by macros parser.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:03:37 +0000 (17:03 +0200)]
Motion-PRO: Update EEPROM's page write bits and write delay.
Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
have a page write capability of two bytes", and "This device offers fast (1ms)
byte write". Add 3ms of extra delay.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:58:45 +0000 (16:58 +0200)]
MPC5XXX, Motion-PRO: Fix PHY initialization problem.
After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
networking does not function. This commit switches PHY to TX mode by clearing
the FX_SEL bit of Mode Control Register. It also reverses commit
008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:57:15 +0000 (16:57 +0200)]
Motion-PRO: Add support for the temperature sensor.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:55:23 +0000 (16:55 +0200)]
Motion-PRO: Add displaying of CPLD revision information during boot.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:53:43 +0000 (16:53 +0200)]
MPC5xxx: Change names of defines related to IPB and PCI clocks.
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:51:48 +0000 (16:51 +0200)]
Motion-PRO: Add LED support.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Stefan Roese [Thu, 24 May 2007 07:50:17 +0000 (09:50 +0200)]
Merge with /home/stefan/git/u-boot/acadia-nand
Stefan Roese [Thu, 24 May 2007 07:49:00 +0000 (09:49 +0200)]
ppc4xx: Fix small 405EZ OCM initilization bug in start.S
As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
fixes a small bug in the 405EZ OCM initialization. Thanks for
spotting.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 24 May 2007 06:22:09 +0000 (08:22 +0200)]
ppc4xx: Update AMCC Acadia support for board revision 1.1
This patch updates the Acadia (405EZ) support for the new 1.1 board
revision. It also adds support for NAND FLASH via the 4xx NDFC.
Please note that the jumper J7 must be in position 2-3 for this
NAND support. Position 1-2 is for NAND booting only. NAND booting
support will follow later.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 22 May 2007 10:48:09 +0000 (12:48 +0200)]
ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 22 May 2007 10:46:10 +0000 (12:46 +0200)]
ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
This patch adds support for 405 PPC's to the 4xx NAND driver
ndfc.c. This is in preparation for the new AMCC 405EZ.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 21 May 2007 05:41:22 +0000 (07:41 +0200)]
ppc4xx: Fix problem in 405EZ OCM initialization
As spotted by Bruce Adler this patch fixes an initialization problem
for the 405EZ OCM.
Signed-off-by: Stefan Roese <sr@denx.de>
Gary Jennejohn [Fri, 18 May 2007 16:41:22 +0000 (17:41 +0100)]
Add support for the Siemens SMN42 board.
Peter Pearse [Fri, 18 May 2007 15:47:03 +0000 (16:47 +0100)]
Reduce line lengths to 80 characters max.
Peter Pearse [Fri, 18 May 2007 13:34:19 +0000 (14:34 +0100)]
Merge with git://www.denx.de/git/u-boot.git
Peter Pearse [Fri, 18 May 2007 13:34:07 +0000 (14:34 +0100)]
Makefile permissions
Peter Pearse [Fri, 18 May 2007 13:33:23 +0000 (14:33 +0100)]
Merge with git://www.denx.de/git/u-boot.git
Peter Pearse [Fri, 18 May 2007 13:33:11 +0000 (14:33 +0100)]
Makefile permissions
Stefan Roese [Fri, 18 May 2007 09:20:02 +0000 (11:20 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Stefano Babic [Wed, 16 May 2007 12:49:12 +0000 (14:49 +0200)]
Fix compile problem cause my Microblaze merge
Signed-off-by: Stefano Babic <sbabic@denx.de>
Jeffrey Mann [Wed, 16 May 2007 11:23:10 +0000 (13:23 +0200)]
[PATCH] Run new sequoia boards with an EBC speed of 83MHz
Because the Sequoia board does not boot with an EBC faster than 66MHz,
the clock divider are changed after the initial boot process.
This allows for maximum clocking speeds to be achieved on newer boards.
Sequoia boards with 666.66 MHz processors require that the EBC divider
be set to 3 in order to start the initial boot process at a slower EBC
speed. After the initial boot process, the divider can be set back to 2,
which will cause the boards to run at 83.333MHz. This is backward
compatible with boards with 533.33 MHz processors, as these boards will
already be set with an EBC divider of 2.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Wolfgang Denk [Tue, 15 May 2007 23:16:53 +0000 (01:16 +0200)]
Minor Coding Style cleanup, update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 May 2007 23:12:04 +0000 (01:12 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc83xx
Wolfgang Denk [Tue, 15 May 2007 22:13:33 +0000 (00:13 +0200)]
Coding Style Cleanup, new CHANGELOG
Wolfgang Denk [Tue, 15 May 2007 22:11:53 +0000 (00:11 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-microblaze
Wolfgang Denk [Mon, 14 May 2007 22:23:53 +0000 (00:23 +0200)]
Merge with /home/wd/git/u-boot/master
Wolfgang Denk [Mon, 14 May 2007 22:22:30 +0000 (00:22 +0200)]
Merge with /home/tur/git/u-boot#motionpro
Stefan Roese [Fri, 11 May 2007 10:01:49 +0000 (12:01 +0200)]
ppc4xx: Add mtcpr/mfcpr access macros
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 11 May 2007 10:01:06 +0000 (12:01 +0200)]
ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Loeliger [Thu, 10 May 2007 18:54:08 +0000 (13:54 -0500)]
Merge branch 'mpc8641'
Piotr Kruszynski [Thu, 10 May 2007 14:55:52 +0000 (16:55 +0200)]
[Motion-PRO] Add MTD and JFFS2 support, also add default partition
definition.
Peter Pearse [Wed, 9 May 2007 10:42:44 +0000 (11:42 +0100)]
Add the board directory for SMN42
Peter Pearse [Wed, 9 May 2007 10:41:58 +0000 (11:41 +0100)]
Add the files for the SMN42 board
Peter Pearse [Wed, 9 May 2007 10:40:34 +0000 (11:40 +0100)]
Remove the deleted files for the SMN42 patch
Peter Pearse [Wed, 9 May 2007 10:37:56 +0000 (11:37 +0100)]
New board SMN42 branch
Peter Pearse [Wed, 9 May 2007 09:24:38 +0000 (10:24 +0100)]
Makefile permissions
Ed Swarthout [Tue, 8 May 2007 19:17:07 +0000 (14:17 -0500)]
8641hpcn: Fix Makefile after moving pixis to board/freescale.
The OBJTREE != SRCTREE build scenario was broken.
This fixes it.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Michal Simek [Tue, 8 May 2007 13:57:43 +0000 (15:57 +0200)]
add: reading special purpose registers
Michal Simek [Tue, 8 May 2007 12:52:52 +0000 (14:52 +0200)]
add: Microblaze V5 exception handling
Michal Simek [Tue, 8 May 2007 12:39:11 +0000 (14:39 +0200)]
add: FSL control read and write
Piotr Kruszynski [Tue, 8 May 2007 11:05:44 +0000 (13:05 +0200)]
[Motion-PRO] Add support for I2C, EEPROM and RTC.
Bartlomiej Sieka [Tue, 8 May 2007 08:23:56 +0000 (10:23 +0200)]
[Motion-PRO] Add ATA support. Add CF-booting commands to the default
environment.
Bartlomiej Sieka [Tue, 8 May 2007 07:39:12 +0000 (09:39 +0200)]
[Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
eliminates networking problems in Linux (timeouts).
Bartlomiej Sieka [Tue, 8 May 2007 07:21:57 +0000 (09:21 +0200)]
[Motion-PRO] Enable Flat Device Tree support and modify default environment
to allow booting of FDT-expecting kernels.
Michal Simek [Mon, 7 May 2007 22:32:35 +0000 (00:32 +0200)]
Merge git://www.denx.de/git/u-boot
Conflicts:
include/asm-microblaze/microblaze_intc.h
include/linux/stat.h
projects / oweals / u-boot.git / log