Felix Fietkau [Mon, 15 Jun 2015 07:45:54 +0000 (07:45 +0000)]
ar71xx/image: add build step mkubntimage2 mkubntkernelimage for unifi boards
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45982
Felix Fietkau [Mon, 15 Jun 2015 07:45:46 +0000 (07:45 +0000)]
ar71xx/image: new build step Build/mkubntimage for ubnt factory images
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45981
Felix Fietkau [Mon, 15 Jun 2015 07:45:36 +0000 (07:45 +0000)]
image.mk: add Build step pad-to
pad-to can be used in a pipe to pad the image to a specific chunk-size.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45980
Felix Fietkau [Mon, 15 Jun 2015 07:45:27 +0000 (07:45 +0000)]
image.mk: add Build step combined-image
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45979
Felix Fietkau [Sun, 14 Jun 2015 17:47:16 +0000 (17:47 +0000)]
Makefile: move the cleaning of staging_dir/target* from dirclean to clean
Currently "make clean" only clears the build_dir/target*, but leaves
staging_dir/target* intact. "make clean" should also clean the
staging_dir/target* directories, as in the current situation some old
packages or libraries may be linked into the firmware from staging_dir
despite a "make clean".
The patch reorganises clean / dirclean functionality so that
* "make clean" also clears the staging_dir/target* in addition to
build_dir/target*.
* "make dirclean" clears toolchain and host(=tools) directories from both
build_dir and staging_dir
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45973
Felix Fietkau [Sun, 14 Jun 2015 17:44:04 +0000 (17:44 +0000)]
procd: update to the latest version, adds a few fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45972
Felix Fietkau [Sun, 14 Jun 2015 17:43:59 +0000 (17:43 +0000)]
ar71xx: return limit as number of processed frames when re-scheduling NAPI poll
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45971
Felix Fietkau [Sun, 14 Jun 2015 17:43:50 +0000 (17:43 +0000)]
ar8216: Fix problem with AR8337 MAC swap handling
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.
Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.
The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 45970
Felix Fietkau [Sun, 14 Jun 2015 17:43:40 +0000 (17:43 +0000)]
elfutils: import package from packages.git
elfutils is required by perf. So we'll move this package from
packages.git and make it part of the core distribution.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45969
Felix Fietkau [Sun, 14 Jun 2015 17:43:34 +0000 (17:43 +0000)]
bzip2: import package from packages.git
bzip2 is required by elfutils, itself required by perf. So we'll move
this package from packages.git and make it part of the core
distribution.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45968
Felix Fietkau [Sun, 14 Jun 2015 17:43:28 +0000 (17:43 +0000)]
argp-standalone: import package from packages.git
argp-standalone is required by elfutils, itself required by perf. So
we'll move this package from packages.git and make it part of the core
distribution.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45967
Felix Fietkau [Sun, 14 Jun 2015 17:43:22 +0000 (17:43 +0000)]
include/scan.mk: Add -a argument to the grep to treat all Makefiles as a text file.
Hello,
I found out that in some rare cases grep can treat Makefile as a binary file. That happened to me on UTF-8 Gentoo if Makefile contained a character which was from extended ASCII table.
Without this patch the output of the grep command in the $(FILELIST) target is not valid (contains line "Binary file matches") and following commands fail to create feed index file.
Best Regards,
Martin Strbacka
Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz>
SVN-Revision: 45966
Felix Fietkau [Sun, 14 Jun 2015 17:43:18 +0000 (17:43 +0000)]
ar71xx: Add pll_1000 value for eth0 to Ubiquiti Rocket M XW
This patch adds the pll_1000 value for eth0 interface. This makes the Rocket M
XW image compatible with other Ubiquiti devices with similar hardware with a
Gigabit Ethernet port.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 45965
Felix Fietkau [Sun, 14 Jun 2015 17:42:05 +0000 (17:42 +0000)]
build: do another init script enabling run, fixes init scripts added via files/ (#19857)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45964
Felix Fietkau [Sun, 14 Jun 2015 17:42:00 +0000 (17:42 +0000)]
oxnas: change file extension of u-boot+initramfs image
The *u-boot-initramfs* images are not ITB/FIT images but are rather
supposed to be loaded to RAM and jumped-into.
To avoid confusion, change the file extension from itb to bin.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45963
Felix Fietkau [Sun, 14 Jun 2015 17:41:54 +0000 (17:41 +0000)]
openvpn: bump PKG_RELEASE.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45962
Felix Fietkau [Sun, 14 Jun 2015 17:41:43 +0000 (17:41 +0000)]
openvpn: let instances drop to nobody in default config.
This is for security precautions. As persist_tun and persist_key are
already there, this should not cause compatibility issue.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45961
Felix Fietkau [Sun, 14 Jun 2015 17:41:38 +0000 (17:41 +0000)]
openvpn: fix handling option auth_retry.
As reported in ticket #19104, auth_retry takes a <type> argument with 3
choices: none, nointeract, interact.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45960
Felix Fietkau [Sun, 14 Jun 2015 17:41:33 +0000 (17:41 +0000)]
libubox: update to the latest version, adds a few fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45959
Felix Fietkau [Sun, 14 Jun 2015 17:41:27 +0000 (17:41 +0000)]
ar71xx: fix mac offset in firmware file
In new firmware-4.bin (for ath10k) mac offset is 0x114 (276), not 0x118 (280).
This also closes #19751, bug introduced in #45624
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 45958
Felix Fietkau [Sun, 14 Jun 2015 17:41:21 +0000 (17:41 +0000)]
firmware-tools/ptgen: use stdint types for struct pte
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45957
Felix Fietkau [Sun, 14 Jun 2015 17:41:16 +0000 (17:41 +0000)]
firmware-tools/ptgen: fix endianness conversion for PTE .start, .length field.
They are of 32-bit little endian integers.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45956
Felix Fietkau [Sun, 14 Jun 2015 17:41:07 +0000 (17:41 +0000)]
procd: correct the order of respawn params in the comments.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45955
Felix Fietkau [Sun, 14 Jun 2015 17:41:01 +0000 (17:41 +0000)]
ar71xx: fix 100/10mbps ethernet link issues on mynet range extender
The mynet range extender hardware is suffering from ethernet
link loss when booting with a recent openwrt image. This only
happens on 100mbps links, with 1Gbps speed the link was fine.
The cause of the problem is that the AR8035 PHY (aka F1E)
requires turning on and off the special TX delay setting
depending on the speed of the link.
The 10mbps mode only needed the proper pll value, which was
extracted from the vendor code.
Reported-by: Pascal Paradis
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 45954
Felix Fietkau [Sun, 14 Jun 2015 17:40:52 +0000 (17:40 +0000)]
samba36: remove host build paths
- fix iconv detection because it adds host paths
- disable python detection (host python-config is found)
iconv issue is reported by buildbot config.log + replicated locally
see config.log in logs.tar.gz
python issue observed locally on Arch Linux
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45953
Felix Fietkau [Sat, 13 Jun 2015 08:47:28 +0000 (08:47 +0000)]
mt76: update to the latest version, adds many fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45952
Steven Barth [Fri, 12 Jun 2015 20:49:20 +0000 (20:49 +0000)]
openssl: 1.0.2c (srsly, you guys, srsly)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45950
Steven Barth [Fri, 12 Jun 2015 07:38:00 +0000 (07:38 +0000)]
ppp: bump PKG_RELEASE
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45949
Steven Barth [Fri, 12 Jun 2015 07:37:53 +0000 (07:37 +0000)]
ppp : Unnumbered support
Adds PPP unnumbered support via the parameter unnumbered which points to a logical OpenWRT interface.
The PPP proto shell handler will "borrow" an IP address from the unnumbered interface (if multiple
IP addresses are present the longest prefix different from 32 will be "borrowed") for which a host
interface dependency will be created. Due to the host interface dependency the PPP unnumbered interface
will only "borrow" an IP address from an interface which is up.
The borrowed IP address will be shared as local IP address by the PPP daemon and no other local IP
will be accepted from the peer in the IPCP negotiation.
A typical use case is the usage of a public IP subnet on the Lan interface which will be shared
by the PPP interface as local IP address.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45948
Steven Barth [Thu, 11 Jun 2015 20:36:46 +0000 (20:36 +0000)]
openssl: fixes CVE-2015-4000 CVE-2015-1788 CVE-2015-1789 CVE-2015-1790 CVE-2015-1792 CVE-2015-1791
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45947
Steven Barth [Thu, 11 Jun 2015 20:28:44 +0000 (20:28 +0000)]
openssl: 1.0.2b (hey, we made it nearly 3 months this time!)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45946
Jonas Gorski [Thu, 11 Jun 2015 12:10:43 +0000 (12:10 +0000)]
brcm63xx: fix A4001N image padding size
When r42245 moved A4001N to DT based detection the image padding size
was accidentally increased from 4 to 8 MiB. This made images unflashable
on these devices.
Fixes #19836.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45945
Imre Kaloz [Thu, 11 Jun 2015 11:57:11 +0000 (11:57 +0000)]
toolchain/gcc: upgrade Linaro GCC 4.9 to 4.9-2015.03
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45944
Rafał Miłecki [Wed, 10 Jun 2015 20:34:32 +0000 (20:34 +0000)]
bcm53xx: update NVRAM driver to MIPS version from upstream-sfr
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45943
Rafał Miłecki [Wed, 10 Jun 2015 19:52:07 +0000 (19:52 +0000)]
brcm47xx: backport BCM47XX patches (NVRAM & BCMA_HOST_PCI)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45942
Steven Barth [Wed, 10 Jun 2015 15:54:24 +0000 (15:54 +0000)]
odhcp6c: work around RIOs matching PIOs as sent by some apple routers
Thanks to Mikael Abrahamsson for reporting.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45941
Steven Barth [Wed, 10 Jun 2015 11:50:13 +0000 (11:50 +0000)]
6to4: Remove sourcerouting parameter registration
Commit
31214c38c8dd0f70366b523f9b0335145b9386bd removes IPv6 unneeded source-dest-routing workarounds;
as a result sourcerouting parameter is unused and can be removed.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45940
Steven Barth [Wed, 10 Jun 2015 11:50:09 +0000 (11:50 +0000)]
6rd: Remove sourcerouting parameter registration
Commit
31214c38c8dd0f70366b523f9b0335145b9386bd removes IPv6 unneeded source-dest-routing workarounds;
as a result sourcerouting parameter is unused and can be removed.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45939
Jonas Gorski [Wed, 10 Jun 2015 09:21:36 +0000 (09:21 +0000)]
b53: fix memory out of bounds access on 64 bit targets
On device reset the sizes for the vlan and port tables were wrongly
calculated based on the pointer size instead of the struct size. This
causes buffer overruns on 64 bit targets, resulting in panics.
Fix this by dereferencing the pointers.
Reported-by: Fedor Konstantinov <blmink@mink.su>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45938
Jonas Gorski [Wed, 10 Jun 2015 09:21:31 +0000 (09:21 +0000)]
b53: widen stp state mask to 3 bits (instead of 2)
At least on my b53 chip, the mask is 3 bits wide, and because
of this some STP states are not set properly and discarded when read.
Maybe for some other chips it makes sense to have just 2 bits width,
but I don't have other versions around to test/validate.
If that's the case then maybe we could add another STP state mask.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45937
Steven Barth [Tue, 9 Jun 2015 21:18:55 +0000 (21:18 +0000)]
map: add sleep work-around for lw4o6 race-condition
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45936
Steven Barth [Tue, 9 Jun 2015 20:28:35 +0000 (20:28 +0000)]
odhcp6c: fix handling of custom DHCPv6 options
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45935
Jo-Philipp Wich [Tue, 9 Jun 2015 16:52:12 +0000 (16:52 +0000)]
ustream-ssl: fix compilation against current PolarSSL/mbedTLS version
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45934
Rafał Miłecki [Tue, 9 Jun 2015 15:13:18 +0000 (15:13 +0000)]
kernel: mac80211: bcm53xx has bcma built-in
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45933
Rafał Miłecki [Mon, 8 Jun 2015 15:17:52 +0000 (15:17 +0000)]
mac80211: add brcmfmac patch for synchronous init
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45932
Rafał Miłecki [Mon, 8 Jun 2015 15:17:35 +0000 (15:17 +0000)]
mac80211: add brcmfmac patch reading NVRAM from platform
This allows e.g. BCM43602 to work out of box, without dumping a proper
MTD partition to /lib/firmware/ NVRAM file.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45931
Felix Fietkau [Mon, 8 Jun 2015 12:51:13 +0000 (12:51 +0000)]
ramips: fix Power LED handling for WHR-300HP2, WHR-600D, WHR-1166D
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45930
Rafał Miłecki [Mon, 8 Jun 2015 12:50:47 +0000 (12:50 +0000)]
mac80211: fix b43 support for 14e4:4321 BCM4321 (band detection)
This fixes #19803
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45929
Rafał Miłecki [Mon, 8 Jun 2015 12:50:38 +0000 (12:50 +0000)]
mac80211: backport today's brcmfmac changes
This adds support for SR400ac NVRAM and fixes
/sys/class/ieee80211/*/macaddress
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45928
Rafał Miłecki [Mon, 8 Jun 2015 12:49:54 +0000 (12:49 +0000)]
kernel: backport config-related bcma patches from 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45927
Steven Barth [Mon, 8 Jun 2015 11:04:10 +0000 (11:04 +0000)]
netifd: bump to latest, various fixes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45926
Steven Barth [Mon, 8 Jun 2015 07:38:13 +0000 (07:38 +0000)]
polarssl: bump to 1.3.11
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45925
Steven Barth [Mon, 8 Jun 2015 04:48:16 +0000 (04:48 +0000)]
dnsmasq: bump to 2.73rc9
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45924
Steven Barth [Mon, 8 Jun 2015 04:48:08 +0000 (04:48 +0000)]
dnsmasq: fix config file typo
s/loclal/local/
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 45923
Rafał Miłecki [Sun, 7 Jun 2015 14:41:05 +0000 (14:41 +0000)]
bcm53xx: backport the latest 4.2 ARM BCM5302X patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45922
Rafał Miłecki [Sun, 7 Jun 2015 10:09:10 +0000 (10:09 +0000)]
brcm47xx: refresh kernel config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45921
Felix Fietkau [Sun, 7 Jun 2015 07:32:35 +0000 (07:32 +0000)]
kernel: move a symbol from the ipq806x config to generic to prevent it from being nuked by make kernel_oldconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45920
Felix Fietkau [Sun, 7 Jun 2015 07:22:11 +0000 (07:22 +0000)]
kernel: remove NAND flash related kmod-* packages
They are useless, as the platform already selects the right options for
NAND support. The main reason for removing them is the fact that it
makes kernel configs more annoying to maintain on platforms that provide
NAND drivers but disable them (e.g. ramips)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45919
John Crispin [Sun, 7 Jun 2015 07:12:23 +0000 (07:12 +0000)]
ralink: add missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45918
Felix Fietkau [Sat, 6 Jun 2015 23:09:43 +0000 (23:09 +0000)]
hostapd: move ht_coex variable to mac80211.sh, guarded by 802.11n support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45917
Rafał Miłecki [Sat, 6 Jun 2015 22:34:37 +0000 (22:34 +0000)]
bcm53xx: refresh kernel config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45916
Rafał Miłecki [Sat, 6 Jun 2015 17:52:53 +0000 (17:52 +0000)]
bcm53xx: fallback to default_do_upgrade if NAND upgrade fails
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45915
Rafał Miłecki [Sat, 6 Jun 2015 17:26:05 +0000 (17:26 +0000)]
bcm53xx: sysupgrade: drop useless shift in platform.sh
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45914
Rafał Miłecki [Sat, 6 Jun 2015 17:25:57 +0000 (17:25 +0000)]
brcm47xx: sysupgrade: drop useless shift in platform.sh
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45913
Rafał Miłecki [Sat, 6 Jun 2015 17:23:03 +0000 (17:23 +0000)]
bcm53xx: extract TRX from image on the fly
Extracting TRX to separated file in /tmp/ just wastes some RAM while we
can just pass a proper extracting command to the default_do_upgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45912
Rafał Miłecki [Sat, 6 Jun 2015 17:05:31 +0000 (17:05 +0000)]
bcm53xx: sysupgrade: extract TRX partitions directly from vendor image
Extracting full TRX out of vendor format is not needed as otrx supports
passing TRX offset. This saves some RAM during sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45911
Hauke Mehrtens [Sat, 6 Jun 2015 13:50:00 +0000 (13:50 +0000)]
ppp: fix download URL
The file is not available at the older path any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45910
Hauke Mehrtens [Sat, 6 Jun 2015 13:49:24 +0000 (13:49 +0000)]
grub: add download mirrors
Add three download mirrors for 'grub', as the Makefile currently defines only
one download location.
@GNU can not be used, as the most recent version of 'grub' is not available
at the general GNU mirrors, and can only be found at the "gnu-alpha" mirrors.
Signed-off-by: Hannu Nyman <hannu.nyman at iki.fi>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45909
Hauke Mehrtens [Sat, 6 Jun 2015 13:48:57 +0000 (13:48 +0000)]
bc: add download mirrors
Add three download mirrors for 'bc', as the Makefile currently defines only
one download location.
@GNU can not be used, as the most recent version of 'bc' is not available at
the general GNU mirrors, and can only be found at the "gnu-alpha" mirrors.
Signed-off-by: Hannu Nyman <hannu.nyman at iki.fi>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45908
Rafał Miłecki [Fri, 5 Jun 2015 21:49:57 +0000 (21:49 +0000)]
bcm53xx: update NVRAM driver to support getting contents
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45907
Rafał Miłecki [Fri, 5 Jun 2015 20:41:18 +0000 (20:41 +0000)]
brcm47xx: backport MIPS BCM47XX changes queued for 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45906
Felix Fietkau [Fri, 5 Jun 2015 18:21:53 +0000 (18:21 +0000)]
base-files: add openwrt snapshot key
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45905
John Crispin [Fri, 5 Jun 2015 14:12:45 +0000 (14:12 +0000)]
opkg: Fix --force-checksum when using SHA256
Allow installing packages with mismatching SHA256 checksums via
$ opkg install --force-checksum $PACKAGE
Signed-off-by: Florian Fieber <florian@florianfieber.de>
SVN-Revision: 45904
John Crispin [Fri, 5 Jun 2015 14:12:34 +0000 (14:12 +0000)]
ar71xx: fix AR71XX_MODEL for TP-Link TL-WA830RE v1
The v1 identifies as v10 internally. As there is no TL-WA830RE v10, add a
workaround to avoid confusing users.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45903
John Crispin [Fri, 5 Jun 2015 14:12:25 +0000 (14:12 +0000)]
ramips: Add support for RT5350F-OLinuXino V2
Version 2 : White spaces and alphabetical order problems
fixed
Support for Olimex RT5350F-OLinuXino Boards, tested with RT5350F-OLinuXino and RT5350F-OLinuXino-EVB boards. More Info :
https://www.olimex.com/Products/OLinuXino/RT5350F/RT5350F-OLinuXino/open-source-hardware
Signed-off-by: Dimitar Gamishev HeHoPMaJIeH <gamishev@gmail.com>
SVN-Revision: 45902
John Crispin [Fri, 5 Jun 2015 14:12:15 +0000 (14:12 +0000)]
brcm47xx: extract TRX from image on the fly
Extracting TRX to separated file in /tmp/ requires extra RAM which may
not be available on some chepaer devices. Instead of that lets pass a
proper extracting command to the default_do_upgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45901
John Crispin [Fri, 5 Jun 2015 14:12:05 +0000 (14:12 +0000)]
base-files: default_do_upgrade: accept & forward image extraction command
get_image allows passing 2nd argument that is used in a pipe for
extracting firmware from a non-native format. By accepting such command
in default_do_upgrade we allow platforms to use this helper for vendor
specific images.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45900
John Crispin [Fri, 5 Jun 2015 14:11:51 +0000 (14:11 +0000)]
lantiq: Backport gpio-stp-xway to fix the highest bits of the PHY LEDs
This fixes the LAN2 LED on Arcadyan VGV7510KW22.
SVN-Revision: 45899
John Crispin [Fri, 5 Jun 2015 14:11:45 +0000 (14:11 +0000)]
uboot-lantiq: Add Arcadyan VGV7510KW22 support
This is already applied in Daniel's ("upstream") tree and thus will be
part of upcoming version(s).
SVN-Revision: 45898
John Crispin [Fri, 5 Jun 2015 14:11:36 +0000 (14:11 +0000)]
lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)
SVN-Revision: 45897
Felix Fietkau [Fri, 5 Jun 2015 09:00:02 +0000 (09:00 +0000)]
mtd: add missing <endian.h> include
trx.c in mtd would not include endian.h, so on systems that do not have
this header implicitly included from the other headers (like musl), both
__BYTE_ORDER and __BIG_ENDIAN would be undefined and thus 0, leading to
it always presuming a big-endian system. this would lead to issues when
running mtd fixtrx on little-endian systems, as it would never recognize
the TRX magic as result of the broken STORE32_LE() macro.
Signed-off-by: Shiz <hi@shiz.me>
Tested-by: Shiz <hi@shiz.me>
SVN-Revision: 45896
Felix Fietkau [Fri, 5 Jun 2015 08:59:57 +0000 (08:59 +0000)]
ramips: improve tx clean up and add fe_tx_ring struct
if there is any new tx need to clean up. do it in next napi poll.
collect tx related members to fe_tx_ring struct. for better
cache usage and more readable.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 45895
Felix Fietkau [Fri, 5 Jun 2015 08:59:48 +0000 (08:59 +0000)]
ramips: change ethernet napi interrupt sequence
when open device. first ready napi software rx.
then enable hardware interrupt.
final start software tx queue to send data.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 45894
Felix Fietkau [Fri, 5 Jun 2015 08:59:42 +0000 (08:59 +0000)]
ramips: fix ethernet vlan tx offload support check when delete
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 45893
Felix Fietkau [Fri, 5 Jun 2015 08:07:41 +0000 (08:07 +0000)]
ramips: fix the memory map on FireWRT
Avoid the use of memory marked as reserved
MT7621 support 512MB memory.
According to "MT7621_ProgrammingGuide_Preliminary_Platform.pdf"
0x0~0x1c000000 448MB
0x20000000~0x4000000 64MB
total 512MB
Signed-off-by: wengbj <fl.service@t-firefly.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45892
Felix Fietkau [Fri, 5 Jun 2015 08:07:35 +0000 (08:07 +0000)]
kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45891
Felix Fietkau [Thu, 4 Jun 2015 21:45:24 +0000 (21:45 +0000)]
ramips: use highmem on the FireWRT board
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45890
Felix Fietkau [Thu, 4 Jun 2015 21:45:12 +0000 (21:45 +0000)]
ramips: enable highmem support for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45889
Felix Fietkau [Thu, 4 Jun 2015 21:45:01 +0000 (21:45 +0000)]
ramips: remove prompt of the USB_MT7621_XHCI_PLATFORM symbol to avoid issues with kernel_menuconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45888
Felix Fietkau [Thu, 4 Jun 2015 21:44:52 +0000 (21:44 +0000)]
gmp: disable assembly to fix build on systems that use PIE binaries
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45887
Felix Fietkau [Thu, 4 Jun 2015 20:08:39 +0000 (20:08 +0000)]
musl: update to version 1.1.9
Patch to 2015-06-04 to fix ldso related regressions on PPC and MIPS.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45886
Steven Barth [Thu, 4 Jun 2015 05:44:44 +0000 (05:44 +0000)]
Add sch_fq and sch_pie to the kmod-sched package.
These are two new packet schedulers introduced in Linux 3.12 and 3.14
respectively. sch_fq is a perfect fairness queueing scheduler that also
adds pacing on host TCP flows, and sch_pie is an AQM.
Having them available in kmod-sched makes it easier for people to test
these new queueing schemes.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
SVN-Revision: 45885
John Crispin [Wed, 3 Jun 2015 13:59:14 +0000 (13:59 +0000)]
lldpd: add option to disable custom TLVs
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 45884
John Crispin [Wed, 3 Jun 2015 13:59:08 +0000 (13:59 +0000)]
procd: work around a event race
there is a conceptual design flaw in our interface events. workaround this by
disabling duplicate message supression in procd. we need to fix this properly
for the next release
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45883
John Crispin [Wed, 3 Jun 2015 13:58:57 +0000 (13:58 +0000)]
lantiq: Make the CRC32 poly value configurable per device
This also adds the old hardcoded value to the VGV7519BRN profile to make
sure that images are still generated correctly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45882
John Crispin [Wed, 3 Jun 2015 13:58:48 +0000 (13:58 +0000)]
tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimg
VGV7519 is currently the only device with brnboot support. It seems to
be happy with 0x2083b8ed as CRC32 poly. However, VGV7510KW22 fails to
validate the checksum - it requires 0x04c11db7 instead.
I have built an brnboot image manually on the command line, once with
the old code and then with the new code but passing the old CRC32
poly value. Both resulted in a brnboot image with the same sha1sum.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45881
John Crispin [Wed, 3 Jun 2015 13:58:30 +0000 (13:58 +0000)]
ipq806x: missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45880
Felix Fietkau [Wed, 3 Jun 2015 00:22:51 +0000 (00:22 +0000)]
Revert "musl: update to version 1.1.9" (r45754)
The current version seems to be broken on MIPS.
SVN-Revision: 45879
Hauke Mehrtens [Tue, 2 Jun 2015 21:54:54 +0000 (21:54 +0000)]
ncurses: Fix building with gcc 5.1
This patch is taken from the gentoo guys who extracted this from a large
upstream commit (with many unrelated changes).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45878
Hauke Mehrtens [Tue, 2 Jun 2015 20:01:21 +0000 (20:01 +0000)]
kernel: add broadcom phy driver
This adds the Broadcom phy driver.
This also loses #19545.
Thank you bigtman43
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45877
projects / oweals / openwrt.git / log