oweals/openssl.git
4 years agoAdd support for passing the libctx to the config loader
Shane Lontis [Fri, 20 Mar 2020 10:25:39 +0000 (20:25 +1000)]
Add support for passing the libctx to the config loader

The self tests for the fips module are triggered on startup and they need to know the
core's libctx in order to function correctly. As the provider can be autoloaded via configuration
it then needs to propagate the callers libctx down to the provider via the config load.

Note that OPENSSL_init_crypto(OPENSSL_INIT_LOAD_CONFIG, ..) is still called, but will only load the default
configuration if the OPENSSL_CONF environment variable is set.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11240)

4 years agoUse RAND_bytes_ex in crypto/rsa
Matt Caswell [Thu, 12 Mar 2020 14:41:45 +0000 (14:41 +0000)]
Use RAND_bytes_ex in crypto/rsa

At various points in crypto/rsa we need to get random numbers. We should
ensure that we use the correct libctx when doing so.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11355)

4 years agoMake sure we use the libctx when fetching a MAC
Matt Caswell [Thu, 12 Mar 2020 14:40:18 +0000 (14:40 +0000)]
Make sure we use the libctx when fetching a MAC

We were doing an EVP_MAC_fetch without using the correct libctx.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11354)

4 years agoHandle the case where there is no digest in an EVP_MD_CTX
Matt Caswell [Thu, 12 Mar 2020 10:55:51 +0000 (10:55 +0000)]
Handle the case where there is no digest in an EVP_MD_CTX

EVP_MD_CTX_ctrl assumes that a digest has always been set. However in a
non-legacy EVP_DigestSign* operation this is not the case because the
digest is handled entirely by the underlying signature implementation.

This fixes one of the travis failures on the master branch.

[extended tests]

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11317)

4 years agoUpdate CHANGES and NEWS for 1.1.1e release
Dr. Matthias St. Pierre [Tue, 17 Mar 2020 16:25:51 +0000 (17:25 +0100)]
Update CHANGES and NEWS for 1.1.1e release

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11346)

4 years agomake err() message strings of find-doc-nits consistently start with uppercase letters
David von Oheimb [Thu, 13 Feb 2020 20:35:38 +0000 (21:35 +0100)]
make err() message strings of find-doc-nits consistently start with uppercase letters

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11092)

4 years agoadd line and file info to 'Malformed line' error msg on *.num files in make-doc-nits
David von Oheimb [Thu, 13 Feb 2020 20:37:04 +0000 (21:37 +0100)]
add line and file info to 'Malformed line' error msg on *.num files in make-doc-nits

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11092)

4 years agoRename OSSL_{d2i,i2d}_CMP_MSG_bio to {d2i,id2}_OSSL_CMP_MSG_bio
Dr. David von Oheimb [Wed, 11 Mar 2020 12:42:49 +0000 (13:42 +0100)]
Rename OSSL_{d2i,i2d}_CMP_MSG_bio to {d2i,id2}_OSSL_CMP_MSG_bio

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11307)

4 years agofix false positive of check-format.pl regarding '#if' on preceding line; extend negat...
Dr. David von Oheimb [Tue, 10 Mar 2020 07:12:57 +0000 (08:12 +0100)]
fix false positive of check-format.pl regarding '#if' on preceding line; extend negative tests

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11285)

4 years agomake util/check-format.pl script executable
Dr. David von Oheimb [Mon, 9 Mar 2020 13:48:14 +0000 (14:48 +0100)]
make util/check-format.pl script executable

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11285)

4 years agofix false positive of check-format.pl reporting '{1 stmt}' after multi-line 'if(expr)'
Dr. David von Oheimb [Mon, 9 Mar 2020 13:42:40 +0000 (14:42 +0100)]
fix false positive of check-format.pl reporting '{1 stmt}' after multi-line 'if(expr)'

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11285)

4 years agoExtend Travis build time-out
Rich Salz [Wed, 11 Mar 2020 18:17:00 +0000 (14:17 -0400)]
Extend Travis build time-out

- Add travis_wait to the build command
- And travis_retry to some apt-get commands.
- Use `make _tests` instead of `make test`

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11319)

4 years agoImplement serializers for ED25519 and ED448
Matt Caswell [Tue, 17 Mar 2020 22:40:33 +0000 (08:40 +1000)]
Implement serializers for ED25519 and ED448

This is largely based on the existing X25519 and X448 serializers - but
a few adjustments were necessary so that we can identify what type of key
we are using. Previously we used the keylen for this but X25519 and
ED25519 have the same keylen.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11272)

4 years agosslapitest: don't leak the SSL_CTX pair
Ben Kaduk [Mon, 16 Mar 2020 18:02:14 +0000 (11:02 -0700)]
sslapitest: don't leak the SSL_CTX pair

We have no need for a new set of SSL_CTXs in test_ccs_change_cipher(), so
just keep using the original ones.  Also, fix a typo in a comment.

[extended tests]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11336)

4 years agoFix the compile error once enabled Werror
Xiaokang Qian [Wed, 11 Mar 2020 05:37:24 +0000 (05:37 +0000)]
Fix the compile error once enabled Werror

On 32 bit operating system,size_t is defined as unsigned int,
this is the return type of strlen(), but it isn't aligned with the %ld,
when compiling, warning will be reported.
Change the type to %zu to avoid the warning.

Change-Id: I2943d0dfba88ef42892f14230242008473d6263b

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11325)

4 years agoUse a flag in SSL3_BUFFER to track when an application buffer is reused.
John Baldwin [Wed, 20 Nov 2019 21:40:12 +0000 (13:40 -0800)]
Use a flag in SSL3_BUFFER to track when an application buffer is reused.

With KTLS, writes to an SSL connection store the application buffer
pointer directly in the 'buf' member instead of allocating a separate
buffer to hold the encrypted data.  As a result,
ssl3_release_write_buffer() has to avoid freeing these 'buf' pointers.

Previously, ssl3_release_write_buffer() checked for KTLS being enabled
on the write BIO to determine if a buffer should be freed.  However, a
buffer can outlive a BIO.  For example, 'openssl s_time' creates new
write BIOs when reusing sessions.  Since the new BIO did not have KTLS
enabled at the start of a connection, ssl3_release_write_buffer()
would incorrectly try to free the 'buf' pointer from the previous KTLS
connection.  To fix, track the state of 'buf' explicitly in
SSL3_BUFFER to determine if the 'buf' should be freed or simply
cleared.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10489)

4 years agoSupport KTLS on connections using BIO_TYPE_CONNECT.
John Baldwin [Tue, 19 Nov 2019 22:12:56 +0000 (14:12 -0800)]
Support KTLS on connections using BIO_TYPE_CONNECT.

This requires duplicating the KTLS changes from bss_sock.c in
bss_conn.c.  One difference from BIO_TYPE_SOCKET is that the call to
ktls_enable is performed after the socket is created in BIO_socket
rather than BIO_new_connect.

Some applications such as 'openssl s_time' use connect BIOs instead of
socket BIOs.  Note that the new connections created for accept BIOs
use BIO_TYPE_SOCKET via BIO_new_socket, so bss_acpt.c does not require
changes.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10489)

4 years agoTEST: Adapt all applicable tests to the new distinguishing ID
Richard Levitte [Tue, 10 Mar 2020 22:10:29 +0000 (23:10 +0100)]
TEST: Adapt all applicable tests to the new distinguishing ID

Fixes #11293

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)

4 years agoAPPS: Remove all traces of special SM2 treatment.
Richard Levitte [Tue, 10 Mar 2020 22:08:59 +0000 (23:08 +0100)]
APPS: Remove all traces of special SM2 treatment.

SM2 IDs are now passed entirely as '-pkeyopt', '-sigopt' or '-vfyopt'
values, just like any other valid option.

Fixes #11293

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)

4 years agoAPPS: Add ctrl_str()-like functionality for X509 and X509_REQ
Richard Levitte [Tue, 10 Mar 2020 22:05:09 +0000 (23:05 +0100)]
APPS: Add ctrl_str()-like functionality for X509 and X509_REQ

This should really be part of libcrypto, but since this looks like
added legacy support, it's preferable to keep it in apps for now.

This allows to build functions that add user given verification
options to X509 and X509_REQ structures.

Fixes #11293

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)

4 years agoSM2: Make the EVP_PKEY_METHOD ctrl_str function listen to distid
Richard Levitte [Tue, 10 Mar 2020 22:00:45 +0000 (23:00 +0100)]
SM2: Make the EVP_PKEY_METHOD ctrl_str function listen to distid

Because we start using Distinguished ID, we also define the key name
"distid", possibly prefixed with "hex", but keep "sm2_id" and
"sm2_hex_id" for compatibility with GmSSL.

Fixes #11293

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)

4 years agoX509: Rename X509_set0_sm2_id() and friends
Richard Levitte [Tue, 10 Mar 2020 21:50:22 +0000 (22:50 +0100)]
X509: Rename X509_set0_sm2_id() and friends

- X509_set0_sm2_id() -> X509_set0_distinguishing_id()
- X509_get0_sm2_id() -> X509_get0_distinguishing_id()
- X509_REQ_set0_sm2_id -> X509_REQ_set0_distinguishing_id()
- X509_REQ_get0_sm2_id -> X509_REQ_get0_distinguishing_id()

The reason for this rename is that the SM2 ID isn't really a unique
SM2 data item, but rather a re-use of the Distinguished that is
defined in ISO/IEC 15946-3 as well as in FIPS 196, with no special
attribution toward any algorithm in particular.

Fixes #11293

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)

4 years agoEVP: Don't call digest_custom() quite so early
Richard Levitte [Tue, 10 Mar 2020 21:07:10 +0000 (22:07 +0100)]
EVP: Don't call digest_custom() quite so early

A huge problem with calling digest_custom() already in the
initialization of DigestSign, DigestVerify etc, is that it force all
callers to know that certain controls must be performed before Init
and the rest after.  This has lead to quite interesting hacks in our
own openssl app, where the SM2 ID had to get special treatment instead
of just being another sign option or verification option among others.

This change moves the call of digest_custom() to the Update and Final
functions, to be done exactly once, subject to a flag that's set in
the Init function.  Seeing to the process of data, through these
operations, this makes no difference at all.  Seeing to making it
possible to perform all controls after the Init call, this makes a
huge difference.

Fixes #11293

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)

4 years agoAdd ECDSA to providers
Shane Lontis [Sun, 15 Mar 2020 11:34:29 +0000 (21:34 +1000)]
Add ECDSA to providers

Added ECDSA support for OSSL_SIGNATURE_PARAM_ALGORITHM_ID

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10968)

4 years agoFix legacy_ctrl_to_param() to pay better attention to keytype
Richard Levitte [Sat, 14 Mar 2020 04:16:16 +0000 (05:16 +0100)]
Fix legacy_ctrl_to_param() to pay better attention to keytype

The keytype number will only be -1 when control commands are used for
more than one key type.  Sometimes, they share the same underlying
structure, and sometimes not.

Some of the RSA control commands that are using only with the keytype
EVP_PKEY_RSA we misplaced to be handled with the keytype -1.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11329)

4 years agoAdd RSA sign to the fips provider
Shane Lontis [Sun, 15 Mar 2020 07:38:00 +0000 (17:38 +1000)]
Add RSA sign to the fips provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11199)

4 years agoDOCS: Fix the description of OSSL_PARAM_allocate_from_text()
Richard Levitte [Sun, 8 Mar 2020 15:37:37 +0000 (16:37 +0100)]
DOCS: Fix the description of OSSL_PARAM_allocate_from_text()

Fixes #11276

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11279)

4 years agoDH: remove DH parameter files that aren't used or installed.
Pauli [Thu, 12 Mar 2020 22:55:04 +0000 (08:55 +1000)]
DH: remove DH parameter files that aren't used or installed.

Old files from the SSLeay 0.8.1b import that aren't used and don't seem to be
installed.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11314)

4 years agoRemove reference to old DH files.
Pauli [Thu, 12 Mar 2020 22:23:27 +0000 (08:23 +1000)]
Remove reference to old DH files.

The files are incorrect for TLS.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11314)

4 years agoRemove old incorrect DH parameter files
Pauli [Thu, 12 Mar 2020 21:46:36 +0000 (07:46 +1000)]
Remove old incorrect DH parameter files

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11314)

4 years agodh: document what the PEM files in apps actually contain.
Pauli [Thu, 12 Mar 2020 03:51:57 +0000 (13:51 +1000)]
dh: document what the PEM files in apps actually contain.

They were claimed to be the SKIP primes but they are really two of the
MODP Diffie-Hellman groups for IKE.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11314)

4 years agoFix RSA structure
Richard Levitte [Thu, 12 Mar 2020 05:26:34 +0000 (06:26 +0100)]
Fix RSA structure

The first field was called 'pad', but not for the reason one might
think.  It was really a padding int that was always zero, and was
placed first on purpose.  This is to pick up programming errors where
an RSA pointer was passed when an EVP_PKEY pointer should have been,
an makes it look like an EVP_PKEY structure with type EVP_PKEY_NONE,
which effectively avoids any further processing (and unintended
corruption of the RSA structure).

This is only relevant for legacy structure and EVP_PKEY_METHODs.  With
providers, EVP_PKEYs aren't passed to the backend anyway.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11315)

4 years agoConfigurations: Fix "android" configuration target
Richard Levitte [Tue, 3 Mar 2020 21:55:09 +0000 (22:55 +0100)]
Configurations: Fix "android" configuration target

This target gave '-pie' as a C flag when it should be a linker flag.
Additionally, we add '-fPIE' as C flag for binaries.

Fixes #11237

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11238)

4 years agoAndoid cross compile: change ANDROID_NDK_HOME to ANDROID_NDK_ROOT
Richard Levitte [Sat, 29 Feb 2020 05:43:26 +0000 (06:43 +0100)]
Andoid cross compile: change ANDROID_NDK_HOME to ANDROID_NDK_ROOT

According to forum discussions with NDK developers, ANDROID_NDK_HOME
is used for something else.

Fixes #11205

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11206)

4 years agoAdd test that changes ciphers on CCS
Benjamin Kaduk [Fri, 6 Mar 2020 21:19:45 +0000 (13:19 -0800)]
Add test that changes ciphers on CCS

The TLS (pre-1.3) ChangeCipherState message is usually used to indicate
the switch from the unencrypted to encrypted part of the handshake.
However, it can also be used in cases where there is an existing
session (such as during resumption handshakes) or when changing from
one cipher to a different one (such as during renegotiation when the
cipher list offered by the client has changed).  This test serves
to exercise such situations, allowing us to detect whether session
objects are being modified in cases when they must remain immutable
for thread-safety purposes.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)

4 years agoCode to thread-safety in ChangeCipherState
Benjamin Kaduk [Fri, 24 Jan 2020 21:44:27 +0000 (13:44 -0800)]
Code to thread-safety in ChangeCipherState

The server-side ChangeCipherState processing stores the new cipher
in the SSL_SESSION object, so that the new state can be used if
this session gets resumed.  However, writing to the session is only
thread-safe for initial handshakes, as at other times the session
object may be in a shared cache and in use by another thread at the
same time.  Reflect this invariant in the code by only writing to
s->session->cipher when it is currently NULL (we do not cache sessions
with no cipher).  The code prior to this change would never actually
change the (non-NULL) cipher value in a session object, since our
server enforces that (pre-TLS-1.3) resumptions use the exact same
cipher as the initial connection, and non-abbreviated renegotiations
have produced a new session object before we get to this point.
Regardless, include logic to detect such a condition and abort the
handshake if it occurs, to avoid any risk of inadvertently using
the wrong cipher on a connection.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)

4 years agoDon't write to the session when computing TLS 1.3 keys
Benjamin Kaduk [Fri, 24 Jan 2020 21:25:53 +0000 (13:25 -0800)]
Don't write to the session when computing TLS 1.3 keys

TLS 1.3 maintains a separate keys chedule in the SSL object, but
was writing to the 'master_key_length' field in the SSL_SESSION
when generating the per-SSL master_secret.  (The generate_master_secret
SSL3_ENC_METHOD function needs an output variable for the master secret
length, but the TLS 1.3 implementation just uses the output size of
the handshake hash function to get the lengths, so the only natural-looking
thing to use as the output length was the field in the session.
This would potentially involve writing to a SSL_SESSION object that was
in the cache (i.e., resumed) and shared with other threads, though.

The thread-safety impact should be minimal, since TLS 1.3 requires the
hash from the original handshake to be associated with the resumption
PSK and used for the subsequent connection.  This means that (in the
resumption case) the value being written would be the same value that was
previously there, so the only risk would be on architectures that can
produce torn writes/reads for aligned size_t values.

Since the value is essentially ignored anyway, just provide the
address of a local dummy variable to generate_master_secret() instead.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)

4 years agoFix whitespace nit in ssl_generate_master_secret()
Benjamin Kaduk [Fri, 24 Jan 2020 21:25:02 +0000 (13:25 -0800)]
Fix whitespace nit in ssl_generate_master_secret()

Use a space after a comma.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)

4 years agodoc: fix spelling of TYPE_get_ex_new_index
Benjamin Kaduk [Fri, 17 Jan 2020 19:15:59 +0000 (11:15 -0800)]
doc: fix spelling of TYPE_get_ex_new_index

The generated macros are TYPE_get_ex_new_index() (to match
CRYPTO_get_ex_new_index()), not TYPE_get_new_ex_index(), even though
the latter spelling seems more natural.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)

4 years agoAdditional updates to SSL_CTX_sess_set_get_cb.pod
Benjamin Kaduk [Thu, 16 Jan 2020 22:37:44 +0000 (14:37 -0800)]
Additional updates to SSL_CTX_sess_set_get_cb.pod

Generally modernize the language.

Refer to TLS instead of SSL/TLS, and try to have more consistent
usage of commas and that/which.

Reword some descriptions to avoid implying that a list of potential
reasons for behavior is an exhaustive list.

Clarify how get_session_cb() is only called on servers (i.e., in general,
and that it's given the session ID proposed by the client).

Clarify the semantics of the get_cb()'s "copy" argument.
The behavior seems to have changed in commit
8876bc054802b043a3ec95554b6c5873291770be, though the behavior prior
to that commit was not to leave the reference-count unchanged if
*copy was not written to -- instead, libssl seemed to assume that the
callback already had incremented the reference count.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)

4 years agodoc: Update the reference from draft to RFC
Jakub Jelen [Tue, 10 Mar 2020 14:15:28 +0000 (15:15 +0100)]
doc: Update the reference from draft to RFC

CLA: trivial

Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11299)

4 years agopkcs12 demo: output correct file names on error.
ning [Wed, 11 Mar 2020 07:28:05 +0000 (15:28 +0800)]
pkcs12 demo: output correct file names on error.

CLA: Trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11304)

4 years agotest/recipes/30-test_evp_data/evppkey.txt: Change an expected KeyGen result
Richard Levitte [Tue, 18 Feb 2020 14:37:08 +0000 (15:37 +0100)]
test/recipes/30-test_evp_data/evppkey.txt: Change an expected KeyGen result

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)

4 years agotest/evp_test.c: fix keygen_test_run()
Richard Levitte [Tue, 18 Feb 2020 14:35:24 +0000 (15:35 +0100)]
test/evp_test.c: fix keygen_test_run()

There was a misunderstanding what it should return.  It should return
0 on internal error, but 1 even if the thing it tests fails (the error
is determined by |t->err|).

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)

4 years agoPROV: Add RSA functionality for key generation
Richard Levitte [Sun, 27 Oct 2019 14:28:29 +0000 (15:28 +0100)]
PROV: Add RSA functionality for key generation

This includes added support in legacy controls

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)

4 years agoEVP: Add new domparams and key generation functionality
Richard Levitte [Sun, 27 Oct 2019 14:09:26 +0000 (15:09 +0100)]
EVP: Add new domparams and key generation functionality

The following functions are added:

EVP_PKEY_gen_set_params(), replacing the older EVP_PKEY_CTX_ctrl()
EVP_PKEY_gen(), replacing both EVP_PKEY_keygen() and EVP_PKEY_paramgen()

These functions are made to work together with already existing domparams
and key generation functionality: EVP_PKEY_CTX_new_provided(),
EVP_PKEY_paramgen_init(), EVP_PKEY_keygen_init(), etc.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)

4 years agoCORE: Add the key object generator libcrypto<->provider interface
Richard Levitte [Sat, 26 Oct 2019 11:00:56 +0000 (13:00 +0200)]
CORE: Add the key object generator libcrypto<->provider interface

We introduce these dispatched functions:

-   OP_keymgmt_gen_init() to initialize the key object generation.
-   OP_keymgmt_gen_set_template() to set a template for key object
    generation.  The template is another key object, for example one
    with domain parameters.
-   OP_keymgmt_gen_set_params() to set other key object generation
    parameters.
-   OP_keymgmt_gen_settable_params() to find out what settable
    parameters there are.
-   OP_keymgmt_gen() to perform the key object generation.
-   OP_keymgmt_gen_cleanup() to clean up the key object generation.

Internal function for easy and consistent use of these ddispatched
functions are added.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)

4 years agoAdd ECDH to fips provider
Shane Lontis [Thu, 20 Feb 2020 06:16:21 +0000 (16:16 +1000)]
Add ECDH to fips provider

Note: This PR has not attempted to move the curves into the provider dispatch table.
Mappings between the curve name / nid have been added to the inbuilt curve table.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11133)

4 years agoAdd EC key validation to default provider
Shane Lontis [Thu, 16 Jan 2020 07:18:26 +0000 (17:18 +1000)]
Add EC key validation to default provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10861)

4 years agoIf the first serializer we find is the desired one that's ok
Matt Caswell [Fri, 6 Mar 2020 18:05:37 +0000 (18:05 +0000)]
If the first serializer we find is the desired one that's ok

Stop looking for a desired serializer if the first one is desired.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11271)

4 years agoDon't crash if we fail to find a serializer for the current provider
Matt Caswell [Fri, 6 Mar 2020 18:02:46 +0000 (18:02 +0000)]
Don't crash if we fail to find a serializer for the current provider

The code was assuming that a serializer would always be found - but this
may not be the case.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11271)

4 years agoAES CTR-DRGB: add test for 32-bit counter overflow
Patrick Steuer [Sat, 22 Feb 2020 00:34:20 +0000 (01:34 +0100)]
AES CTR-DRGB: add test for 32-bit counter overflow

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10457)

4 years agoAES CTR-DRGB: performance improvement
Patrick Steuer [Fri, 15 Nov 2019 22:27:09 +0000 (23:27 +0100)]
AES CTR-DRGB: performance improvement

Optimize the the AES-based implementation of the CTR_DRBG
construction, see 10.2.1 in [1].
Due to the optimizations, the code may deviate (more) from the
pseudocode in [1], but it is functional equivalence being decisive
for compliance:

"All DRBG mechanisms and algorithms are described in this document
in pseudocode, which is intended to explain functionality.
The pseudocode is not intended to constrain real-world
implementations." [9 in [1]].

The following optimizations are done:

- Replace multiple plain AES encryptions by a single AES-ECB
  encryption of a corresponding pre-initialized buffer, where
  possible.
  This allows platform-specific AES-ECB support to
  be used and reduces the overhead of multiple EVP calls.

- Replace the generate operation loop (which is a counter
  increment followed by a plain AES encryption) by a
  loop which does a plain AES encryption followed by
  a counter increment. The latter loop is just a description
  of AES-CTR, so we replace it by a single AES-CTR
  encryption.
  This allows for platform-specific AES-CTR support to be used
  and reduces the overhead of multiple EVP calls.
  This change, that is, going from a pre- to a post- counter
  increment, requires the counter in the internal state
  to be kept at "+1" (compared to the pseudocode in [1])
  such that it is in the correct state, when a generate
  operation is called.
  That in turn also requires all other operations to be
  changed from pre- to post-increment to keep functional
  equivalence.

[1] NIST SP 800-90A Revision 1

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10457)

4 years agoDOCS: Use "command" not "tool" or "utility"
Rich Salz [Tue, 18 Feb 2020 16:52:12 +0000 (11:52 -0500)]
DOCS: Use "command" not "tool" or "utility"

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11123)

4 years agoMove OSSL_CMP_X509_digest() to x_all.c, renaming it to X509_digest_sig()
Dr. David von Oheimb [Thu, 5 Mar 2020 08:16:29 +0000 (09:16 +0100)]
Move OSSL_CMP_X509_digest() to x_all.c, renaming it to X509_digest_sig()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)

4 years agoFix handling of CMP msg senderKID and improve doc of related CTX functions
Dr. David von Oheimb [Wed, 26 Feb 2020 20:41:47 +0000 (21:41 +0100)]
Fix handling of CMP msg senderKID and improve doc of related CTX functions

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)

4 years agoFix error in case CMP msg POPO is not provided in OSSL_CRMF_MSGS_verify_popo()
Dr. David von Oheimb [Tue, 25 Feb 2020 07:58:39 +0000 (08:58 +0100)]
Fix error in case CMP msg POPO is not provided in OSSL_CRMF_MSGS_verify_popo()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)

4 years agoChunk 8 of CMP contribution to OpenSSL: CMP server and cmp_mock_srv.c for testing
Dr. David von Oheimb [Tue, 10 Mar 2020 09:29:46 +0000 (10:29 +0100)]
Chunk 8 of CMP contribution to OpenSSL: CMP server and cmp_mock_srv.c for testing

Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)

4 years agoExtract sk_ASN1_UTF8STRING2text() from ts_get_status_text() in ts_rsp_verify.c to...
Dr. David von Oheimb [Thu, 5 Mar 2020 07:43:06 +0000 (08:43 +0100)]
Extract sk_ASN1_UTF8STRING2text() from ts_get_status_text() in ts_rsp_verify.c to asn1_lib.c

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)

4 years agofix coding style nits w.r.t. 'defined' in http_local.h, http.h, and ocsp.h
Dr. David von Oheimb [Tue, 10 Mar 2020 09:40:43 +0000 (10:40 +0100)]
fix coding style nits w.r.t. 'defined' in http_local.h, http.h, and ocsp.h

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)

4 years agofix two mistakes w.r.t. ERR_LIB_* parameters in ERR_add_error_txt()
Dr. David von Oheimb [Tue, 10 Mar 2020 09:39:22 +0000 (10:39 +0100)]
fix two mistakes w.r.t. ERR_LIB_* parameters in ERR_add_error_txt()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)

4 years agoDOCS: Clean up doc/man3/EVP_DigestInit.pod
Richard Levitte [Sat, 7 Mar 2020 07:00:51 +0000 (08:00 +0100)]
DOCS: Clean up doc/man3/EVP_DigestInit.pod

We touch it, we clean it up!
Accordding to common man-pages(7) guidelines.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)

4 years agoDOCS: Add translation information for EVP_MD_CTX_ctrl()
Richard Levitte [Sat, 7 Mar 2020 06:51:27 +0000 (07:51 +0100)]
DOCS: Add translation information for EVP_MD_CTX_ctrl()

EVP_MD_CTX_ctrl() translates some known control commands when faced
with a fetched EVP_MD, so we need to document it.

This also ensures that we don't drop the information on the "micalg"
parameter entirely.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)

4 years agoDOCS: Add missing documentation in util/missingcrypto.txt
Richard Levitte [Fri, 6 Mar 2020 13:33:17 +0000 (14:33 +0100)]
DOCS: Add missing documentation in util/missingcrypto.txt

These lines will be taken away as documentation moves from diverse
provider operation interface manuals to implementation specific docs.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)

4 years agoDOCS: Move implementation specific docs away from provider-digest(7)
Richard Levitte [Fri, 6 Mar 2020 13:29:00 +0000 (14:29 +0100)]
DOCS: Move implementation specific docs away from provider-digest(7)

The provider- manuals are meant to describe the general interface for
their respective operation.  This is not the place to describe
implementation specific details.

This change creates a number of doc/man7/EVP_MD manuals, one for each
algorithm or set of algorithms, as well as doc/man7/EVP_MD-common.pod
to describe what's common to them all.

While we're at it, correct the SHA3 settable context params array to
match what's actually settable.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)

4 years agoDOCS: Start restructuring our provider and implementation documentation
Richard Levitte [Fri, 6 Mar 2020 13:25:42 +0000 (14:25 +0100)]
DOCS: Start restructuring our provider and implementation documentation

This adds doc/man7/OSSL_PROVIDER-default.pod and OSSL_PROVIDER-legacy.pod,
and fills in currently implemented operations and algorithms in them, as
well as in doc/man7/OSSL_PROVIDER-FIPS.pod, with links to documentation to
come.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11270)

4 years agoRenew and extend the tool for checking adherence to C coding style rules
Dr. David von Oheimb [Mon, 9 Mar 2020 10:03:21 +0000 (11:03 +0100)]
Renew and extend the tool for checking adherence to C coding style rules

aims at checking most of https://www.openssl.org/policies/codingstyle.html
and various requirements not yet explicitly stated there - see also #10725

add util/check-format.pl and its self-tests in
util/check-format-test-{positives,negatives}.c
remove util/openssl-format-source

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10363)

4 years agoDH: add internal dh_get_method()
Richard Levitte [Sat, 29 Feb 2020 07:57:34 +0000 (08:57 +0100)]
DH: add internal dh_get_method()

This should have been publically present a long time ago, to be
consistent with the RSA, DSA and EC_KEY APIs.  However, since we've
now deprecated that kind of function for the other key types, there's
no point in adding a public function, but we still need it internally.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11193)

4 years agoEVP: Check that key methods aren't foreign when exporting
Richard Levitte [Thu, 27 Feb 2020 09:51:45 +0000 (10:51 +0100)]
EVP: Check that key methods aren't foreign when exporting

The EVP_PKEY_ASN1_METHOD function export_to() must check that the key
we're trying to export has a known libcrypto method, i.e. is a built
in RSA_METHOD, DSA_METHOD, etc.  Otherwise, the method may be defined
by the calling application, by an engine, by another library, and we
simply cannot know all the quirks hidden behind that method, if we
have access to the key data, or much anything.

Such keys are simply deemed impossible to export to provider keys,
i.e. have export_to() return 0.  This cascades back to functions like
evp_pkey_export_to_provider() and evp_pkey_upgrade_to_provider() and
their callers.  In most cases, this is fine, but if these get mixed in
with provider side keys in any function, that function will fail.

Fixes #11179
Fixes #9915

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11193)

4 years agoDOCS: Fix documentation on asymmetric keydata types
Richard Levitte [Sat, 7 Mar 2020 07:23:16 +0000 (08:23 +0100)]
DOCS: Fix documentation on asymmetric keydata types

Some type specs didn't correspond to actual use.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11275)

4 years agodocs: fix typo in SSL functions
James Peach [Thu, 5 Mar 2020 07:43:54 +0000 (07:43 +0000)]
docs: fix typo in SSL functions

CLA: trivial

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11253)

4 years agoutil/wrap.pl: do not look at EXE_SHELL
Richard Levitte [Thu, 5 Mar 2020 13:14:09 +0000 (14:14 +0100)]
util/wrap.pl: do not look at EXE_SHELL

Acting on EXE_SHELL was a bit over the top, especially in light of
instructions like this (from NOTES.VALGRIND):

    EXE_SHELL="`/bin/pwd`/util/wrap.pl valgrind --error-exitcode=1 --leak-check=full -q"

Fixes #11255

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11258)

4 years agoRemove double fetch of "OSSL_EX_DATA_GLOBAL" for global lock
Davide Galassi [Sun, 23 Feb 2020 09:01:45 +0000 (10:01 +0100)]
Remove double fetch of "OSSL_EX_DATA_GLOBAL" for global lock

Fetch once and just pass the global ex_data to the "get_and_lock" static
function.

Removed a redundant null pointer check within the "get_and_lock" static
function (control already performed by the caller).

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11152)

4 years agospkac: Check return values of NETSCAPE_SPKI functions
Vladimir Panteleev [Tue, 3 Mar 2020 18:04:00 +0000 (18:04 +0000)]
spkac: Check return values of NETSCAPE_SPKI functions

Fixes silently producing an invalid SPKAC with non-RSA keys.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11224)

4 years agoDocument the new DigestSign provider functions
Matt Caswell [Thu, 5 Mar 2020 17:16:04 +0000 (17:16 +0000)]
Document the new DigestSign provider functions

As well as the newly added "one shot" functions, we also document a number
of the other other digestsign functions which were missing documentation in
provider-signature.pod.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)

4 years agoImplement provider support for Ed25519 annd Ed448
Matt Caswell [Thu, 5 Mar 2020 15:42:13 +0000 (15:42 +0000)]
Implement provider support for Ed25519 annd Ed448

At the moment we only provider support for these algorithms in the default
provider. These algorithms only support "one shot" EVP_DigestSign() and
EVP_DigestVerify() as per the existing libcrypto versions.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)

4 years agoAdd provider awareness of EVP_DigestSign() and EVP_DigestVerify()
Matt Caswell [Thu, 5 Mar 2020 15:40:48 +0000 (15:40 +0000)]
Add provider awareness of EVP_DigestSign() and EVP_DigestVerify()

These "one-shot" functions are the only ones supported by Ed25519 and
Ed448, so we need to ensure that libcrypto can handle provider
based implementations of these functions.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)

4 years agoAdd Key Management support for EdDSA keys
Matt Caswell [Mon, 17 Feb 2020 16:37:24 +0000 (16:37 +0000)]
Add Key Management support for EdDSA keys

Support added for Ed25519 and Ed448

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)

4 years agoRefactor CRMF_poposigningkey_init() to work with provider keys
Richard Levitte [Wed, 19 Feb 2020 06:05:52 +0000 (07:05 +0100)]
Refactor CRMF_poposigningkey_init() to work with provider keys

The code in this function was almost entirely a copy of the
functionality in ASN1_item_sign(), so it gets refactored to actually
call ASN1_item_sign(), and thereby automatically gets support for
EVP_PKEYs with only provider side keys.

Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11126)

4 years agodoc: slightly reformulate 'openssl(1)/Random State Options' section
Dr. Matthias St. Pierre [Wed, 4 Mar 2020 22:13:24 +0000 (23:13 +0100)]
doc: slightly reformulate 'openssl(1)/Random State Options' section

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11252)

4 years agoImprove small block cipher performance
Kurt Roeckx [Sun, 16 Feb 2020 13:44:06 +0000 (14:44 +0100)]
Improve small block cipher performance

Avoid function calls we don't need to do.

In 1.1.1 we have:
aes-128-cbc     572267.80k   681197.08k   715430.74k   720508.59k   722359.64k   723004.07k

Current master:
aes-128-cbc     460663.70k   631125.66k   701283.58k   719794.52k   724732.59k   726668.63k

new:
aes-128-cbc     582057.64k   684288.62k   715721.90k   724856.15k   717578.24k   727176.53k

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11102)

4 years agoAdd -section option to 'req' command
Rich Salz [Wed, 4 Mar 2020 19:41:53 +0000 (14:41 -0500)]
Add -section option to 'req' command

This removes "req" as the hardwired section for the req command.
Doing this will let us merge some test configs.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11249)

4 years agocmdline app: add provider commandline options.
Pauli [Tue, 25 Feb 2020 04:29:30 +0000 (14:29 +1000)]
cmdline app: add provider commandline options.

Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.

Add a -provider_path option to allow the path to providers to be specified.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)

4 years agoman1: make all openssl command line tool documentation generated.
Pauli [Wed, 26 Feb 2020 21:45:31 +0000 (07:45 +1000)]
man1: make all openssl command line tool documentation generated.

With the introduction of provider command line options which are applicable to
almost all of the command line tools, it seemed reasonable to make them all
generated.  This simplifes the .gitignore and avoids having to keep two lists
in sync.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)

4 years agoChange DH_get_nid() to set the value of q if it is not already set
Shane Lontis [Fri, 6 Mar 2020 21:47:58 +0000 (07:47 +1000)]
Change DH_get_nid() to set the value of q if it is not already set

Fixes #11108.

It only sets q if a valid named group is found.
The function signature was recently changed to pass a non const DH pointer
in order to allow the nid to be cached internally. As an extension of this
the value of q can now also be set as q is always known for named groups.
The length field is also set if q is set.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11114)

4 years agoClarify the usage of EVP_PKEY_get_raw_[private|public]_key()
Matt Caswell [Thu, 5 Mar 2020 09:21:56 +0000 (09:21 +0000)]
Clarify the usage of EVP_PKEY_get_raw_[private|public]_key()

EVP_PKEY_get_raw_private_key() and EVP_PKEY_get_raw_public_key() expect
the size of the key buffer to be populated in the |*len| parameter on
entry - but the docs made no mention of this.

Fixes #11245

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11254)

4 years agoUse .cnf for config files, not .conf
Rich Salz [Tue, 25 Feb 2020 18:25:13 +0000 (13:25 -0500)]
Use .cnf for config files, not .conf

The default is openssl.cnf  The project seems to prefer xxx.conf these
days, but we should use the default convention.

Rename all foo.conf (except for Configurations) to foo.cnf

Fixes #11174

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11176)

4 years agoRemove unused files
Rich Salz [Tue, 25 Feb 2020 17:03:44 +0000 (12:03 -0500)]
Remove unused files

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11176)

4 years agofix a minor bug of s_client
Roger Ning [Mon, 2 Mar 2020 05:35:02 +0000 (13:35 +0800)]
fix a minor bug of s_client

CLA: trivial

-CAstore's option should be OPT_CASTORE, instead of OPT_CAFILE
correct also -no-CAstore option from OPT_NOCAPATH to OPT_NOCASTORE

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11215)

4 years agoAdd CIFuzz action
Leo Neat [Fri, 21 Feb 2020 00:42:32 +0000 (16:42 -0800)]
Add CIFuzz action

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11140)

4 years agocrypto/ec/curve448/eddsa.c: fix EBCDIC platforms
Patrick Steuer [Tue, 3 Mar 2020 12:29:03 +0000 (13:29 +0100)]
crypto/ec/curve448/eddsa.c: fix EBCDIC platforms

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11229)

4 years agoaes-s390x.pl: fix stg offset caused by typo in perlasm
Patrick Steuer [Tue, 3 Mar 2020 16:40:07 +0000 (17:40 +0100)]
aes-s390x.pl: fix stg offset caused by typo in perlasm

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11234)

4 years ago.github/PULL_REQUEST_TEMPLATE.md: Fix link to contributors guide
Vladimir Panteleev [Mon, 2 Mar 2020 20:36:07 +0000 (20:36 +0000)]
.github/PULL_REQUEST_TEMPLATE.md: Fix link to contributors guide

The file was converted to Markdown and renamed appropriately in
2e07506a12e126894cd820304465162bc0e732b4.

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11223)

4 years agoAdd DSA Key validation to default provider
Shane Lontis [Tue, 21 Jan 2020 05:57:25 +0000 (15:57 +1000)]
Add DSA Key validation to default provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10912)

4 years agoAdd DH key validation to default provider
Shane Lontis [Tue, 21 Jan 2020 05:45:40 +0000 (15:45 +1000)]
Add DH key validation to default provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10911)

4 years agoconfig, Configure: move the check of removed crypto/ sub-systems
Richard Levitte [Mon, 2 Mar 2020 09:50:24 +0000 (10:50 +0100)]
config, Configure: move the check of removed crypto/ sub-systems

The 'config' script checked for a bunch of crypto/ sub-system
directories, and added 'no-' options if they weren't there.

We move it to 'Configure' in an effort to simplify 'config' for
further work.

Note: this is pretty much a historical thing.  In modern OpenSSL, it's
much simpler to edit the SUBDIRS statement in crypto/build.info.
However, it's been claimed the there are those who still remove some
of these sub-system sources.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11217)

4 years ago.travis.yml: where it matters, have build and source nesting levels differ
Richard Levitte [Wed, 26 Feb 2020 13:57:39 +0000 (14:57 +0100)]
.travis.yml: where it matters, have build and source nesting levels differ

Where we build out of source, the source directory was _srcdist and
the build directory was _build.  That gives the same nesting level for
both, which doesn't quite exercise all aspects of relative back
references from build to source tree.

Changing the build tree to be in _build/tree will challenge back
references a bit more, and ensure a bit more that we got it right.

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11186)

4 years agoAdd some missing env var documentation
Rich Salz [Wed, 26 Feb 2020 20:25:43 +0000 (15:25 -0500)]
Add some missing env var documentation

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11189)

4 years ago.gitignore: Add /apps/progs.{c,h}
Vladimir Panteleev [Mon, 2 Mar 2020 18:05:03 +0000 (18:05 +0000)]
.gitignore: Add /apps/progs.{c,h}

These files were removed from the source tree in
fe909ee4aeb6eb64f6f31a1544c5d3c81c5fe1f1.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11222)

4 years agoAdd Serializers for EC
Shane Lontis [Sun, 16 Feb 2020 09:54:08 +0000 (19:54 +1000)]
Add Serializers for EC

Provide EC serializers for text, pem and der.

EC parameters use ANS1 'CHOICE' - which means they are more embedded than other parameters used by
other KEY types (which normally have a SEQUENCE at the top level).
For this reason the ANS1_STRING type that was being passed around has been changed to a void so that the
code can still be shared with EC.

The EC serializer only supports named curves currently.

NOTE the serializer code assumes PKCS8 format - if the older encode methods are needed they will need to be
added in another PR. (Probably when deserialization is considered).

EVP_PKEY_key_fromdata_init was changed from using a keypair selection to all bits of a key. A side effect of this was
that the very restrictive checks in the ecx code needed to be relaxed as it was assuming all selection flags were non
optional. As this is not the case for any other key the code has been modified.

Fixed a bug in legacy_ctrl_str_to_params() - "ecdh_cofactor_mode" was being incorrectly converted to the wrong keyname.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11107)