SPARC: Build error fix

(introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)

This patch makes SPARC targets build again. It is caused by
phys_addr_t and phys_size_t being defined in the wrong header
file. include/lmb.h need those typedefs to build.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

Many spelling fixes in README.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Minor spelling fix in comment.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Round the serial port clock divisor value returned by calc_divisor()

Round the serial port clock divisor value returned by
calc_divisor().

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: John Roberts <john.roberts@pwav.com>

ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)

ARM: Fix for incorrect version of patch applied when
adding support for the Lyrtech SFF-SDR board.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>

Remove useless print message at apollon

Remove useless print message at apollon

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Fix LMB type issues

The LMB code now uses phys_addr_t and phys_size_t.  Also, there were a couple
of casting problems in the bootm code that called the LMB functions.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Fix compiler warnings

gcc-4.3.x generates the following:

bootm.c: In function 'do_bootm_linux':
bootm.c:208: warning: cast from pointer to integer of different size
bootm.c:215: warning: cast from pointer to integer of different size

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Remove code duplication for setting the default environment

common/env_common.c (default_env): new function that resets the environment to
    the default value
common/env_common.c (env_relocate): use default_env instead of own copy
common/env_nand.c (env_relocate_spec): use default_env instead of own copy
include/environment.h: added default_env prototype

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>

mmc: Move atmel_mci driver into drivers/mmc

This makes it easier to use the driver on other platforms.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver

After we move the atmel_mci driver into drivers/mmc, we can't select
it with CONFIG_MMC anymore. Introduce a new symbol specifically for
this driver so that there's no ambiguity.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Create drivers/mmc subdirectory

In order to consolidate more of the various MMC drivers around the
tree, we must first have a common place to put them.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Change env_get_char from a global function ptr to a function

This avoids an early global data reference.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

Some copy-n-paste fixes in printf usage

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

FDT memory and pci node fixes for MPC8260ADS

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

Fix printf errors.

The compiler will help find mismatches between printf formats and
arguments if you let it.  This patch adds the necessary attributes to
declarations in include/common.h, then begins to correct the resulting
compiler warnings.  Some of these were bugs, e.g., "$d" instead of
"%d" and incorrect arguments.  Others were just annoying, like
int-long mismatches on a system where both are 32 bits.  It's worth
fixing the annoying errors to catch the real ones.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>

Merge branch 'master' of git://denx.de/git/u-boot-mips

Merge branch 'master' of git://denx.de/git/u-boot-cfi-flash

Merge branch 'master' of git://denx.de/git/u-boot-net

Merge branch 'master' of git://denx.de/git/u-boot-sh

Allow print_size to print in GB

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment

Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
they are set in the U-Boot environment.

Signed-off-by: Jason McMullan <mcmullan@netapp.com>
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

jedec_flash: Fix AM29DL800BB device ID

As pointed out by Jerry Hicks, this patch corrects the device ID of
the Spansion AM29DL800BB NOR device. Verified against latest Spansion
datasheet (rev C4 from Dezember 2006).

Signed-off-by: Stefan Roese <sr@denx.de>

sh: Fix compile error sh7763rdp board

Disable SH ether driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Fix SH-boards compile error

By Cleanup out-or-tree building for some boards (.depend)
(commit:c8a3b109f07f02342d097b30908965f7261d9f15)
because filse ware changed, some SH-boards have compile error.
I revised this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

Remove duplicate code in a if/else block in
cpu/arm926ejs/davinci/lxt972.c.
Fixed style issues.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Remove duplicate definitions in include/lxt971a.h.

Remove duplicate definitions in include/lxt971a.h.

Remove duplicate registers and bits definitions in
include/lxt971a.h for standard MII registers, and
use values in include/miiphy.h instead.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

net: sh: Renesas SH7763 Ethernet device support

Renesas SH7763 has 2 channel Ethernet device.
This is 10/100/1000 Base support.
But this patch check 10/100 Base only.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

sh: Update Renesas R2DPlus board

New NOR Flash board support and remove old type flash board config.
And Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Renesas R7780MP board

New NOR Flash board support and remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Renesas Migo-R board

Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Hitachi MS7722SE board

Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of SH7763RDP

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of R2DPlus

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of R7780MP

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of MS7722SE

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of MS7720SE

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-at91

SH: fix out of tree building

Signed-off-by: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-avr32

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx

net: smc911x: Fix typo

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

update mvBL-M7 board config

update mvBL-M7 config file to use UBOOT_VERSION and define
CONFIG_HIGH_BATS.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

net: fix compile problem in smc911x driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>

ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405

This change helps with better handling with others
Xilinx based platform.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>

net: ne2000: Move dev_addr variable from grobal to local.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

net: ne2000: Fix compile error of NE2000

If enable DEBUG, can not compile ne2000 driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Add mechanisms for CPU and board-specific Ethernet initialization

This patch is the first step in cleaning up net/eth.c, by moving Ethernet
initialization to CPU or board-specific code.  Initial implementation is
only on the Freescale TSEC controller, but others will be added soon.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

include/sha256.h: fix file permissions.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of ssh+git://mercury.denx.de/home/wd/git/u-boot/master

Conflicts:

board/amirix/ap1000/serial.c
board/exbitgen/exbitgen.c
board/exbitgen/flash.c
board/ml2/serial.c
board/xilinx/ml300/serial.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

[AT91SAM9] Fix NAND FLASH timings

Fix NAND FLASH timings for at91sam9x evaluation kits.

New timings are based on application note
"NAND Flash Support on AT91SAM9 Microcontrollers" available at
http://atmel.com/dyn/resources/prod_documents/doc6255.pdf

Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Stelian Pop <stelian@popies.net>

Fix boot from NOR due to incorrect reset delay.

AT91 RSTC registers are battery-backuped, so their values
are not reset across power cycles. One of those registers,
the AT91_RSTC_MR register, is being modified by U-Boot, in
the ethernet initialisation routine, to generate a 500ms
user reset.

Unfortunately, this value is not being restored afterwards,
causing subsequent resets to also last for 500ms.

This long reset sequence causes problems (at least) in the
boot sequence from NOR: by the time the CPU tries to load
a program from the NOR flash, the latter is still in reset
and not yet available.

Additionaly, this patch fixes a bug in the original code which
caused the reset delay to last for 2s instead of 500ms.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

CCM/SCM boards: fix out of tree building

Signed-off-by: Wolfgang Denk <wd@denx.de>

SCM board: fix build errors.

Signed-off-by: Wolfgang Denk <wd@denx.de>

IAD210 board: fix ``"ALIGN" redefined'' warning.

Signed-off-by: Wolfgang Denk <wd@denx.de>

CCM board: fix build errors.

Signed-off-by: Wolfgang Denk <wd@denx.de>

update mvBL-M7 board config

update mvBL-M7 config file to use UBOOT_VERSION.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors

Signed-off-by: Wolfgang Denk <wd@denx.de>

lmb: fix "implicit declaration of function 'lmb_free'" warning

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: remove redundant deleting on *~ files

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup out-or-tree building for some boards (.depend)

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: fix out-of-tree building for some boards

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)

Signed-off-by: Wolfgang Denk <wd@denx.de>

fdt: Fix typo in variable name.

Signed-off-by: Detlev Zundel <dzu@denx.de>

Add logos for RRvision board

Signed-off-by: Gary Jennejohn <garyj@denx.de>

mpc8260: add fdt_fixup_ethernet support

Add support for updating mac-address and local-mac-address in fdt for
all MPC8260 targets.

Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>

cmd_nvedit.c: clean up syntax highlighting

My text-editor (vim) has a bit of trouble syntax-highlighting the
cmd_nvedit.c file, because it apparently does not parse C
ifdef/else/endif. The following patch does not change the behavior of
the code at all, but does allow the editor to properly
syntax-highlight the file.

Signed-off-by: Steve Falco <sfalco@harris.com>

Make setenv() return status

Currently, the setenv function does not return an error code.
This patch allows to test for errors.

Signed-off-by: Steve Falco <sfalco@harris.com>

PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops

fls64, __ilog2_u64, ffs64 are variants that work on an u64,
and fls is used to implement them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

i.MX31: Cleanup comments in lowlevel_init.S.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

Move conditional compilation of MPC8XXX SPI driver to Makefile

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

i.MX31: fixed CTRL-C detection

The Register URXD contains status information in bits [15..8].
With status bit 15 set, CTRL-C was reported as 0x8003 instead
of 0x03. Therefore CTRL-C was not detected.
To solve this, bits [15..8] were masked out now.

Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
Acked-by: Felix Radensky <felix@embedded-sol.com>

add SHA256 support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>

Delay FIT format check on sector based devices

Global FIT image operations like format check cannot be performed on
a first sector data, defer them to the point when whole FIT image was
uploaded to a system RAM.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>

sata: wait for device updating signature to host

The driver need wait for the device updating signature to host.
If we don't wait for it, the driver can not detect the device(disk)
when the system powers up.

Signed-off-by: Dave Liu <daveliu@freescale.com>

Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx

ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic

This patch implements a fix provided by AMCC so that the lockup upon
simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
anymore:

Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
(bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
USB 2.0 host and SATA.

This errata is not officially available yet. I'll update the comment
to add the errata number later.

Signed-off-by: Stefan Roese <sr@denx.de>

serial_pl010.c: add watchdog support

Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>

jffs2_1pass.c: add watchdog support

Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>

Configure DSP POST; add watchdog reset to diag command

Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>

Add sata sil3114 support

Signed-off-by: Tor Krill <tor@excito.com>

Coding Style Cleanup

Signed-off-by: Wolfgang Denk <wd@denx.de>

Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)

This patch adds support for the Lyrtech SFF-SDR board,
based on the TI DaVinci architecture (ARM926EJS).

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Wolfgang Denk <wd@denx.de>

MMC: Consolidate MMC/SD command definitions

This moves the MMC and SD Card command definitions from
include/asm/arch/mmc.h into include/mmc.h. These definitions are
given by the MMC and SD Card standards, not by any particular
architecture.

There's a lot more room for consolidation in the MMC drivers which
I'm hoping to get done eventually, but this patch is a start.

Compile-tested for all avr32 boards as well as lpc2292sodimm and
lubbock. This should cover all three mmc drivers in the tree.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Use better Ethernet timings for apollon board

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Resize device tree to allow space for board changes and the chosen node

Current code requires that a compiled device tree have space added to the end to
leave room for extra nodes added by board code (and the chosen node).  This
requires that device tree creators anticipate how much space U-Boot will add to
the tree, which is absurd.  Ideally, the code would resize and/or relocate the
tree when it needed more space, but this would require a systemic change to the
fdt code, which is non-trivial.  Instead, we resize the tree inside
boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Fix an underflow bug in __lmb_alloc_base

__lmb_alloc_base can underflow if it fails to find free space.  This was fixed
in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc.  This patch
merely updates __lmb_alloc_base to resemble the current version in Linux.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Add lmb_free

lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
lmb_reserve to temporarily reserve some memory.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Add ALIGN() macro

ALIGN() returns the smallest aligned value greater than the passed
in address or size.  Taken from Linux.

Signed-off-by: Andy Fleming <afleming@freescale.com>

ppc4xx: Fix compilation problems with phys_size_t

This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
board specific files where it has been missing.

Signed-off-by: Stefan Roese <sr@denx.de>

Conditionally add -fno-stack-protector to CFLAGS

When compile-testing on powerpc, I get errors like this:

net/nfs.c:422: undefined reference to `__stack_chk_fail_local'

This seems to be because -fstack-protector is on by default, so
let's explicitly disable it on all architectures that support the
option.

The Ubuntu toolchain is affected by this problem, and according to
Mike Frysinger, Gentoo has been running with SSP enabled for years.
More and more distros are turning SSP on by default, so this problem
is likely to get worse in the future.

Also, powerpc just happens to be one of the arches I do
compile-testing on. There may be other arches affected by this too.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

pcmcia/ti_pci1410a: Move compile condition to the Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

pxa_pcmcia: Move compile condition to the Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

marabun_pcmcia: Move compile condition to the Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>