Mugunthan V N [Tue, 2 Feb 2016 10:21:33 +0000 (15:51 +0530)]
drivers: net: keystone_net: convert driver to adopt device driver model
Adopt keystone_net driver to adopt device driver model
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Mugunthan V N [Tue, 2 Feb 2016 10:21:32 +0000 (15:51 +0530)]
drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH
When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or
CONFIG_PHY_MICREL_KSZ9021 there is a build error. Fixing this
by adding proper ifdefs
drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type
static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
^
drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type
static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
^
drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’:
drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type
struct ksz90x1_ofcfg ofcfg[] = {
^
drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function)
{ MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
^
drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function)
{ MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
^
drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration]
ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
^
drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable]
struct ksz90x1_ofcfg ofcfg[] = {
^
drivers/net/phy/micrel.c: At top level:
drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable]
static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
^
drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable]
static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
^
scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed
make[1]: *** [drivers/net/phy/micrel.o] Error 1
Makefile:1201: recipe for target 'drivers/net/phy' failed
make: *** [drivers/net/phy] Error 2
make: *** Waiting for unfinished jobs....
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Mugunthan V N [Tue, 2 Feb 2016 10:21:31 +0000 (15:51 +0530)]
board: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is defined
remove board_eth_init when CONFIG_DM_ETH is defined
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Adam Ford [Mon, 1 Feb 2016 12:27:21 +0000 (06:27 -0600)]
OMAP3: omap3_logic: Remove YAFFS support.
UBIFS is the preferred FS, and YAFFS isn't officially included in
Linux. Removing this feature reduces the code size.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Adam Ford [Sun, 31 Jan 2016 23:13:33 +0000 (17:13 -0600)]
OMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BIT
The interface automatically converts one 32-bit word into two 16 words.
The README said it is permissible to use this flag in that scenario.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Adam Ford [Sun, 31 Jan 2016 19:34:39 +0000 (13:34 -0600)]
OMAP3: omap3_logic: Enable Android Fastboot
Android Fastboot requires USB. The TWL4030 PMIC on omap3_logic handles USB traffic.
This patch sets up the USB gadget and Android Fastboot to match what is done in the
omap3_beagle project.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sun, 31 Jan 2016 16:16:17 +0000 (09:16 -0700)]
dm: Update on current serial driver status
Update the README to reflect the current status.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 31 Jan 2016 16:16:16 +0000 (09:16 -0700)]
dm: pxa: serial: Drop serial_sa1100 serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sun, 31 Jan 2016 16:16:15 +0000 (09:16 -0700)]
dm: serial: Drop serial_max3100 serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sun, 31 Jan 2016 16:16:14 +0000 (09:16 -0700)]
dm: freescale: serial: Drop serial_imx serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sun, 31 Jan 2016 16:16:13 +0000 (09:16 -0700)]
dm: opencores: Drop opencores_yanu serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sun, 31 Jan 2016 16:16:12 +0000 (09:16 -0700)]
dm: freescale: Drop mxs_auart serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).
Signed-off-by: Simon Glass <sjg@chromium.org>
Adam Ford [Sat, 30 Jan 2016 12:43:59 +0000 (06:43 -0600)]
OMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting
The defconfig patch will enable the the SPL and NAND settings.
The update to Kconfig will allow the SPL to configured in and
built.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Adam Ford [Sat, 30 Jan 2016 02:12:34 +0000 (20:12 -0600)]
OMAP3: Enable SPL on omap3_logic
Previously, Omap3_logic assumed X-loader was present. With this
patch, we can finally replace X-loader with an MLO generated by
U-Boot. This requires ECC to be setup to match the Linux Kernel
and the PBIAS confgured for the SD card.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Lubomir Rintel [Fri, 29 Jan 2016 08:35:52 +0000 (09:35 +0100)]
rpi: fix up Model B entries
The P5 header was not present on "Model B" any board prior to Revision 2.0,
there's no need for a separate device tree.
Also, it looks like "rev2" is incorrectly used to only cover the 512MiB
memory models; there also were 256MiB 2.0 boards.
I don't have all of the boards to check this, I'm following this table:
http://elinux.org/RPi_HardwareHistory#Board_Revision_History
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Stephen Warren [Fri, 29 Jan 2016 05:24:44 +0000 (22:24 -0700)]
rpi: link to another model number info source
This source has been blessed by Dom Cobley at the RPi Foundation, so seems
like the best source to refer to. It's a superset of and consistent with
the other sources.
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Marek Vasut [Wed, 27 Jan 2016 03:47:55 +0000 (04:47 +0100)]
hush: Add rudimentary support for PS1 and PS2
Add trivial support for changing the U-Boot command prompt string
by setting PS1 and PS2 environment variables. Only static variables
are supported.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Wed, 27 Jan 2016 03:47:54 +0000 (04:47 +0100)]
hush: Pull out U-Boot prompt display and read functionality
Pull the code which displays U-Boot prompt and reads the command line
into a separate function. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Vikas Manocha [Wed, 27 Jan 2016 02:12:20 +0000 (18:12 -0800)]
serial: serial_stm32: move clock config from driver to board
This patch removes the uart clock enable from serial driver & move it in the
board code.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heiko Schocher [Tue, 26 Jan 2016 07:42:48 +0000 (08:42 +0100)]
test, tools: introduce tbot README
introduce a README how to use tbot for testing U-Boot
and/or linux kernels.
Signed-off-by: Heiko Schocher <hs@denx.de>
Adam Ford [Fri, 22 Jan 2016 01:50:07 +0000 (19:50 -0600)]
ARM: omap3_logic: Fix pin muxing
Enhance pin muxing to enable more board features and reduce power
based on Tony's device tree work.
Signed-off-by: Adam Ford <aford173@gmail.com>
Andreas Fenkart [Wed, 9 Dec 2015 12:13:27 +0000 (13:13 +0100)]
tools: env: update usage strings
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
Andreas Fenkart [Wed, 9 Dec 2015 12:13:26 +0000 (13:13 +0100)]
tools: env: factor out parse_common_args
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
Andreas Fenkart [Wed, 9 Dec 2015 12:13:25 +0000 (13:13 +0100)]
tools: env: shift optind arguments and fix argument indices
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
Andreas Fenkart [Wed, 9 Dec 2015 12:13:24 +0000 (13:13 +0100)]
tools: env: parse aes key / suppress flag into argument struct
disabled original parsing, but not yet removed since the
argument indexing needs to be fixed
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
Andreas Fenkart [Wed, 9 Dec 2015 12:13:23 +0000 (13:13 +0100)]
tools: env: introduce setenv/printenv argument structs
goal is to use getopt for all argument parsing instead of adhoc
parsing in fw_getenv/fw_setenv functions
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
Andreas Fenkart [Wed, 9 Dec 2015 12:13:22 +0000 (13:13 +0100)]
tools: env: make parse_aes_key stateless
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
Andreas Fenkart [Wed, 9 Dec 2015 12:13:21 +0000 (13:13 +0100)]
tools: env validate: pass values as 0-based array
passing argv/argc can produce off-by-one errors
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
Tom Rini [Mon, 8 Feb 2016 14:48:04 +0000 (09:48 -0500)]
Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
Tom Rini [Mon, 8 Feb 2016 14:39:54 +0000 (09:39 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-nios
Stephen Warren [Sat, 6 Feb 2016 17:42:43 +0000 (10:42 -0700)]
video: bcm2835: use bus_to_phys() on FB address
The FB address is generated by the firmware running on the GPU/VideoCore
and is a "bus" address. This address is the other side of an IOMMU from
the ARM upon which U-Boot is running. Use bus_to_phys() to convert this
to an ARM physical address. Without this, U-Boot seems to work just fine,
but once the Linux kernel boots on an RPi2, accessing the FB memory often
causes a hard system hang.
This is related to:
122426d46e31 ARM: bcm2835: use phys_to_bus() for mbox
5c0beb5c58c8 usb: dwc2: use phys_to_bus/bus_to_phys
79340db7f1f6 ARM: bcm2835: implement phys_to_bus/bus_to_phys
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Vishwas Srivastava [Tue, 26 Jan 2016 07:16:42 +0000 (12:46 +0530)]
net: davinci_emac: fix NULL check after pointer dereference
NULL check is made after the pointer dereference. This patch
fixes this issue.
Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Ricardo Ribalda [Thu, 4 Feb 2016 13:45:00 +0000 (14:45 +0100)]
ppc: xilinx-ppc405-generic
Fix device tree name:
+(xilinx-ppc405-generic) Device Tree Source is not correctly specified.
+(xilinx-ppc405-generic) Please define 'CONFIG_DEFAULT_DEVICE_TREE'
+(xilinx-ppc405-generic) or build with 'DEVICE_TREE=<device_tree>'
argument
+(xilinx-ppc405-generic) make[2]: ***
[arch/powerpc/dts/xilinx-ppc440-generic.dtb] Error 1
+(xilinx-ppc405-generic) make[1]: *** [dts] Error 2
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Vishwas Srivastava [Mon, 25 Jan 2016 15:58:17 +0000 (21:28 +0530)]
net: fix wrong initialization in davinci-emac driver
emac module of the davinci platform supports only 8 tx and 8
rx channels (total 16). emac driver for davinci platform,
however, while doing initialization of the dma descriptor
head pointers, wrongly initializes the 16 head pointers
(instead of 8) for tx dma and 16 head pointers (insted of 8)
for rx dma, which is wrong. The result is, that this register
initilization spills over the other registers which was not
intended and is undesirable. This patch fixes this problem.
Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Peng Fan [Mon, 1 Feb 2016 05:31:15 +0000 (13:31 +0800)]
fdt: introduce fdtdec_get_child_count
Introduce fdtdec_get_child_count for get the number of subnodes
of one parent node.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 30 Jan 2016 22:45:19 +0000 (15:45 -0700)]
rockchip: Drop old CONFIG_VIDEO_ROTATION option
The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards
were not updated. However this option is is not needed by default for
Rockchip since we don't need a rotated console for current boards. So just
remove the old option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sat, 30 Jan 2016 22:45:18 +0000 (15:45 -0700)]
bzlib: Try another way to fix an unused variable
Use __maybe_unused which should avoid the Coverity error.
Reported-by: Coverity (CID: 134900)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sat, 30 Jan 2016 22:45:17 +0000 (15:45 -0700)]
video: test: Adjust order of file closure
Close the file earlier to hopefully fix a Coverity error.
Reported-by: Coverity (CID: 134901)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sat, 30 Jan 2016 22:45:16 +0000 (15:45 -0700)]
video: Use 'int' for loop variables instead of short
Using short doesn't save anything and is confusing when the width and height
variables are ulong.
This may fix Coverity CID134902 but I doubt it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sat, 30 Jan 2016 22:45:15 +0000 (15:45 -0700)]
cmd: Fix control bmp_display()
All paths should share the same return.
Reported-by: Coverity (CID:134903)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sat, 30 Jan 2016 22:45:14 +0000 (15:45 -0700)]
microblaze: Correct build error in eth-uclass.c
This fixes the following error when building microblaze-generic:
net/eth-uclass.c: In function 'eth_post_probe':
net/eth-uclass.c:466:18: error: 'gd' undeclared (first use in this function)
ops->start += gd->reloc_off;
Fixes:
db9391e1 ("net: Move driver-model code into its own file")
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Bin Meng [Sat, 6 Feb 2016 03:30:11 +0000 (19:30 -0800)]
Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Thomas Chou [Wed, 30 Dec 2015 12:29:18 +0000 (20:29 +0800)]
nios2: set up the debug UART early
Set up the debug UART early if enabled, so that it is ready to use.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
Bin Meng [Tue, 2 Feb 2016 13:58:09 +0000 (05:58 -0800)]
x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLE
Now that we have converted all x86 codes to DM PCI, drop pci_type1.c
which is only built for legacy PCI. Also per checkpatch.pl warning,
DEFINE_PCI_DEVICE_TABLE is now deprecated so drop that too.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:08 +0000 (05:58 -0800)]
x86: Disable DM_PCI_COMPAT
Now that all x86 codes have been converted to use proper DM PCI APIs,
it's time to disable the legacy compatible layer.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Tue, 2 Feb 2016 13:58:07 +0000 (05:58 -0800)]
dm: pci: Add missing forward declarations
When CONFIG_DM_PCI_COMPAT is not on, there is only a forward declaration
for pci_write_config32(). Add other missing ones.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:06 +0000 (05:58 -0800)]
x86: chromebox_panther: Convert to use driver model ethernet
This board uses RTL8169 which is a driver model ethernet driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:05 +0000 (05:58 -0800)]
x86: chromebox_panther: Drop the cache line size hack
Now that the RTL8169 driver warning is fixed we can drop this.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:04 +0000 (05:58 -0800)]
efi: app: Disable CONFIG_USB_EHCI_PCI
It does not build if without CONFIG_DM_PCI_COMPAT. For now we just
disable it, until some day we add USB support to EFI application.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:03 +0000 (05:58 -0800)]
efi: app: Clean up defconfig
Move some #undef from efi-x86.h to efi-x86_defconfig as these are
already Kconfig options.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:02 +0000 (05:58 -0800)]
x86: quark: Use Quark's own PCI config APIs
There are still two places in Quark's MRC codes that use the generic
legacy PCI APIs, but as we are phasing out these legacy APIs, switch
to use Quark's own PCI config routines.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:01 +0000 (05:58 -0800)]
net: e1000: Convert to use DM PCI API
Update this driver to use proper DM PCI APIs.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:58:00 +0000 (05:58 -0800)]
net: designware: Use dm_pci_mem_to_phys() in the probe routine
Convert to use native DM PCI API dm_pci_mem_to_phys().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 2 Feb 2016 13:57:59 +0000 (05:57 -0800)]
net: pch_gbe: Convert to use DM PCI API
Use native DM PCI APIs instead of legacy compatible ones.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:58 +0000 (01:40 -0800)]
x86: pci: Drop legacy PCI APIs
Now that we have converted all x86 codes to use DM PCI APIs,
drop those legacy ones.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:57 +0000 (01:40 -0800)]
x86: pci: Use DM PCI APIs in pci_assign_irqs()
Drop legacy PCI APIs usage in pci_assign_irqs() as well.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:56 +0000 (01:40 -0800)]
x86: qemu: Convert to use DM PCI API
Use pci_[read|write]_config intead of x86_pci_[read|write]_config.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:55 +0000 (01:40 -0800)]
x86: tnc: Remove IGD and SDVO devices from driver model
With recent DM PCI changes to vesa_fb driver, external graphics
card does not work any more. This is because: after setting the
function disable bit, IGD and SDVO devices will disappear in the
PCI configuration space. This however creates an inconsistent state
from a driver model PCI controller point of view, as these two PCI
devices are still attached to its parent's child device list as
maintained by the driver model. Some driver model PCI APIs like
dm_pci_find_class() used in the vesa_fb driver, are referring to
the list to speed up the finding process instead of re-enumerating
the whole PCI bus, so it gets the stale cached data which is wrong.
To fix this, manually remove these two devices.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:54 +0000 (01:40 -0800)]
x86: tnc: Use DM PCI API in disable_igd()
Once we get udevice of IGD and SDVO, we can use its udevice to
access PCI configuration space with dm_pci_write_config32().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:53 +0000 (01:40 -0800)]
x86: tnc: Change disable_igd() to have a return value
So far disable_igd() does not have any return value, but we may need
that in the future.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:52 +0000 (01:40 -0800)]
x86: irq: Convert to use DM PCI API
Now that we have irq router's udevice passed as a parameter, it's
time to start using the DM PCI API instead of those legacy ones.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:51 +0000 (01:40 -0800)]
x86: irq: Move irq_router to a per driver priv
At present irq_router is declared as a static struct irq_router in
arch/x86/cpu/irq.c. Since it's a driver control block, it makes sense
to move it to a per driver priv. Adjust existing APIs to accept an
additional parameter of irq_router's udevice.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:50 +0000 (01:40 -0800)]
x86: irq: Get irq_router's bdf via dm_pci_get_bdf()
There is no need to parse PCH's <reg> property as we have already
a DM PCI API dm_pci_get_bdf() that can handle this.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:49 +0000 (01:40 -0800)]
x86: minnowmax: Drop io-base property in the pch_pinctrl node
IOBASE is now obtained from PCH driver, drop this <io-base> property.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:48 +0000 (01:40 -0800)]
x86: Drop asm/arch/gpio.h
asm/arch/gpio.h is not needed anymore as we get the GPIO base from
PCH driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:47 +0000 (01:40 -0800)]
x86: ich6_gpio: Convert to use proper DM API
At present this GPIO driver still uses the legacy PCI API. Now that
we have proper PCH drivers we can use those to obtain the information
we need. While the device tree has nodes for the GPIO peripheral it is
not in the right place. It should be on the PCI bus as a sub-peripheral
of the PCH device.
Update the device tree files to show the GPIO controller within the PCH,
so that PCI access works as expected. This also adds '#address-cells'
and '#size-cells' to the PCH node.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:46 +0000 (01:40 -0800)]
x86: pch9: Implement get_io_base op
IO_BASE is only seen on PCH9 device, implement the get_io_base op.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:45 +0000 (01:40 -0800)]
dm: pch: Add get_io_base op
On some newer chipset (eg: BayTrail), there is an IO base address
register on the PCH device which configures the base address of a
memory-mapped I/O controller.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:44 +0000 (01:40 -0800)]
x86: pch: Implement get_gpio_base op
Implement get_gpio_base op for bd82x6x, pch7 and pch9 drivers.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:43 +0000 (01:40 -0800)]
dm: pch: Add get_gpio_base op
x86 GPIO registers are accessed via I/O port whose base address is
configured in a PCI configuration register on the PCH device. Add
an op get_gpio_base to get the GPIO base address from PCH.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:42 +0000 (01:40 -0800)]
dm: pch: Rename get_sbase op to get_spi_base
Spell out 'sbase' to 'spi_base' so that it looks clearer.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:41 +0000 (01:40 -0800)]
dm: pch: Remove pch_get_version op
pch_get_version op was only used by the ich spi controller driver,
and does not really provide a good identification of pch controller
so far, since we see plenty of Intel PCH chipsets and one differs
from another a lot, which is not simply either a PCHV_7 or PCHV_9.
Now that ich spi controller driver was updated to not get such info
from pch, the pch_get_version op is useless now.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:40 +0000 (01:40 -0800)]
x86: quark: Drop unprotect_spi_flash()
Unprotecting SPI flash is now handled in the SPI controller driver,
via a call to the PCH driver. Drop the ad-hoc version.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:39 +0000 (01:40 -0800)]
x86: tnc: Drop unprotect_spi_flash()
Unprotecting SPI flash is now handled in the SPI controller driver,
via a call to the PCH driver. Drop the ad-hoc version.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:38 +0000 (01:40 -0800)]
spi: ich: Change PCHV_ to ICHV_
The ICH SPI controller supports two variants, one of which is ICH7
compatible and the other is ICH9 compatible. Change 'pch_version'
to 'ich_version' to better match its original name.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:37 +0000 (01:40 -0800)]
spi: ich: Use compatible strings to distinguish controller version
At present ich spi driver gets the controller version information via
pch, but this can be simply retrieved via spi node's compatible string.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 1 Feb 2016 09:40:36 +0000 (01:40 -0800)]
spi: ich: Some clean up
This cleans up the ich spi driver a little bit:
- Remove struct ich_spi_slave that is not referenced anywhere
- Remove ending period in some comments
- Move struct ich_spi_platdata and struct ich_spi_priv to ich.h
- Add #ifndef _ICH_H_ .. in ich.h
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Stefan Roese [Mon, 18 Jan 2016 13:49:56 +0000 (14:49 +0100)]
x86: x86-common.h: Add CONFIG_BOOTDELAY
Without this CONFIG_BOOTDELAY, autobooting does not work at all. As
autoboot_command() from common/* will not get called. So lets define
CONFIG_BOOTDELAY, so that auto-booting works on x86.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Miao Yan <yanmiaobest@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Tested-by: Miao Yan <yanmiaobest@gmail.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Stefan Roese [Thu, 28 Jan 2016 16:34:40 +0000 (17:34 +0100)]
autoboot.c: Fill env vars in process_fdt_options() only if TEXT_BASE is set
The x86 build target "efi-x86" has no TEXT_BASE configured. And with the
introduction of CONFIG_BOOTDELAY for x86, this function is now called
for this board as well. Resulting in compile errors for this target.
Without TEXT_BASE it makes no sense to fill these values. So lets only
configure the env variable if TEXT_BASE is defined.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Thu, 4 Feb 2016 11:56:23 +0000 (06:56 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Thu, 4 Feb 2016 11:56:20 +0000 (06:56 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
Dinh Nguyen [Tue, 19 Jan 2016 15:16:21 +0000 (09:16 -0600)]
Revert "arm: socfpga: set the fpga global bit to disable HPS to FPGA signals"
Apparently, the logic for the FPGA global bit is not universal between Gen5
and Gen10 devices is not the same. Disabling this bit, while applicable to
Gen10 devices, will break FPGA programming on Gen5 devices.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Frank Wang [Wed, 27 Jan 2016 20:39:40 +0000 (12:39 -0800)]
usb: gadget: dwc2_udc_otg: modified the check condition for max packet size of ep_in in high speed
In current high speed fastboot, fs_ep_in.wMaxPacketSize is configured 64 bytes
as default, as a result, it failed to match the size at initialization stage in
usb controller.
Actually, hardware can support less than or equal to 512 bytes in high speed mode,
so I changed the condition from '!=' to '>' to fix this issue.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Tested-by: Steve Rae <srae@broadcom.com>
Peng Fan [Thu, 28 Jan 2016 08:51:27 +0000 (16:51 +0800)]
imx: mx6: implement board_mmc_get_env_dev
Implement board_mmc_get_env_dev for the boards.
Following is examples:
SD1/SD2/SD3: return devno;
SD2/SD3: return devno - 1;
SD2/SD4: if (devno == 2), return dev - 2; return dev - 1;
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Peng Fan [Thu, 28 Jan 2016 08:51:26 +0000 (16:51 +0800)]
imx: mx6: implement mmc_get_env_dev
Implement mmc_get_env_dev, devno can be got from smbr1 of SRC.
Introduce a weak function board_mmc_get_env_dev, different
boards can implement it according to different sdhc controllers
that used by the board.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Peng Fan [Thu, 28 Jan 2016 08:51:25 +0000 (16:51 +0800)]
imx: mx7dsabresd: move mmc_get_env_devno to soc code
Move mmc_get_env_devno to soc.c and rename to mmc_get_env_dev to
match the one in common/env_mmc.c.
Introduce a weak function board_mmc_get_env_dev. Different
boards can implement this according to sdhc controller which
is used by the board.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:53 +0000 (10:31 +0530)]
dm: vybrid_gpio: Drop legacy code
All boards using this driver are with device tree support,
hence drop the legacy code in driver to have a pure DT solution.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:52 +0000 (10:31 +0530)]
dm: lpuart: Drop the legacy code
All boards using this driver are with device tree support,
hence drop the legacy code in driver to have a pure DT solution.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:51 +0000 (10:31 +0530)]
arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode
Remove the legacy way of enabling GPIO, SPI and UART on Vybrid
based boards since these driver's now only supports DT mode.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:50 +0000 (10:31 +0530)]
arm: vybrid: Update defconfig's
Let's go with pure DT solution for board's
based on NXP/Freescale Vybrid platform.
- Merge the DT defconfig with non-DT defconfig for Toradex
Colibri VF50/VF61 and drop the non-DT defconfig.
- Update the legacy defconfigs for NXP/Freescale VF610 Tower
Board with DT.
- Update the legacy defconfigs for Phytec phyCORE-vybrid
Board with DT.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:49 +0000 (10:31 +0530)]
arm: pcm052: Add device tree file's
- Add device tree files for Phytec phyCORE-Vybrid Board.
- Enable lpuart support for Phytec phyCORE-Vybrid Board.
- Use UART1 for stdout.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:48 +0000 (10:31 +0530)]
arm: vf610-twr: Add device tree file's
- Add device tree files for NXP/Freescale VF610 Tower Board.
- Enable lpuart support on NXP/Freescale VF610 Tower Board.
- Use UART1 as stdout.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:47 +0000 (10:31 +0530)]
arm: colibri-vf: Enable serial support
- Enable lpuart support on Toradex Colibri VF50/VF61
- Use UART0 for stdout.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:46 +0000 (10:31 +0530)]
arm: vybrid: Update the license string
Since SPDX license is already there, drop the full one.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bhuvanchandra DV [Wed, 27 Jan 2016 05:01:45 +0000 (10:31 +0530)]
arm: vybrid: Enable lpuart support
Add device tree node's for lpuart on Vybrid platform
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Ye Li [Tue, 26 Jan 2016 14:09:40 +0000 (22:09 +0800)]
imx: mx6sxsabresd: Add MCIMX28LCD display support
The i.MX6SX SABRESD board supports MCIMX28LCD (800x480x24) at LCDIF1
port, enable this display feature by adding relevant BSP codes
and configurations.
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Tue, 26 Jan 2016 14:01:58 +0000 (22:01 +0800)]
imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculation
The checking with max frequency supported is not correct, because the temp
is calculated by max pre and post dividers. We can decrease any divider to
meet the max frequency limitation. Actually, the calculation below the codes
is doing this way to find best pre and post dividers.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Ye Li [Tue, 26 Jan 2016 14:01:57 +0000 (22:01 +0800)]
imx: mx6sx: Fix issue in LCDIF clock enablement
Wrong checking for the base_addr paramter with LCDIF1 and LCDIF2. Always
enter the -EINVAL return.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Mon, 1 Feb 2016 16:24:56 +0000 (14:24 -0200)]
mx6slevk: Remove CONFIG_ETHPRIME option
As mx6slevk has only one Ethernet port, we don't need
to declare CONFIG_ETHPRIME, so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Ye Li [Sat, 30 Jan 2016 03:53:42 +0000 (11:53 +0800)]
imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure
The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card.
Fixed the value to correct one.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>