Jean-Christophe PLAGNIOL-VILLARD [Tue, 12 Aug 2008 23:40:39 +0000 (01:40 +0200)]
drivers/block: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 12 Aug 2008 23:40:39 +0000 (01:40 +0200)]
serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
move also conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 12 Aug 2008 23:40:38 +0000 (01:40 +0200)]
serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
move also conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 12 Aug 2008 23:40:38 +0000 (01:40 +0200)]
common: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 12 Aug 2008 23:40:09 +0000 (01:40 +0200)]
mx31: move freescale's mx31 boards to vendor board dir
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Tue, 12 Aug 2008 20:02:27 +0000 (22:02 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-at91
Jean-Christophe PLAGNIOL-VILLARD [Sat, 5 Jul 2008 21:11:11 +0000 (23:11 +0200)]
at91: move arch-at91sam9 to arch-at91
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Fathi BOUDRA [Wed, 6 Aug 2008 08:06:20 +0000 (10:06 +0200)]
OneNAND: Fill in MTD function pointers for OneNAND.
onenand_print_device_info():
- Now returns a string to be placed in mtd->name,
rather than calling printf.
- Remove verbose parameter as it becomes useless.
Signed-off-by: Fathi Boudra <fabo@debian.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Guennadi Liakhovetski [Wed, 6 Aug 2008 19:42:07 +0000 (21:42 +0200)]
nand_spl: Support page-aligned read in nand_load, use chipselect
Supporting page-aligned reads doesn't incure any sinificant overhead, just
a small change in the algorithm. Also replace in_8 with readb, since there
is no in_8 on ARM.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Tue, 5 Aug 2008 16:15:59 +0000 (11:15 -0500)]
NAND boot: Update large page support for current API.
Also, remove the ctrl variable in favor of passing the constants
directly, and remove redundant (u8) casts.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Mon, 30 Jun 2008 19:13:28 +0000 (14:13 -0500)]
NAND boot: MPC8313ERDB support
Note that with older board revisions, NAND boot may only work after a
power-on reset, and not after a warm reset. I don't have a newer board
to test on; if you have a board with a 33MHz crystal, please let me know
if it works after a warm reset.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Thu, 26 Jun 2008 19:06:52 +0000 (14:06 -0500)]
mpc8313erdb: Enable NAND in config.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Guennadi Liakhovetski [Thu, 31 Jul 2008 10:38:26 +0000 (12:38 +0200)]
NAND: Do not write or read a whole block if it is larger than the environment
Environment can be smaller than NAND block size, do not need to read a whole
block and minimum for writing is one page. Also remove an unused variable.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Marcel Ziswiler [Sun, 22 Jun 2008 14:30:06 +0000 (16:30 +0200)]
NAND: chip->state does not always get set.
Fixes an issue with chip->state not always being set causing troubles.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Ilya Yanok [Mon, 30 Jun 2008 13:34:40 +0000 (15:34 +0200)]
NAND: Scan bad blocks lazily.
Rather than scanning on boot, scan upon the first attempt to check the
badness of a block. This speeds up boot when not using NAND, and reduces
the likelihood of needing to reflash via JTAG if NAND becomes
nonfunctional.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Thu, 12 Jun 2008 18:20:16 +0000 (13:20 -0500)]
NAND read/write fix
Implement block-skipping read/write, based on a patch from
Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Thu, 12 Jun 2008 18:13:23 +0000 (13:13 -0500)]
NAND: Always skip blocks on read/write/boot.
Use of the non-skipping versions was almost always (if not always)
an error, and no valid use case has been identified.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Anton Vorontsov [Thu, 12 Jun 2008 16:10:21 +0000 (11:10 -0500)]
nand: fsl_upm: convert to updated MTD NAND infrastructure
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Thu, 22 May 2008 20:02:46 +0000 (15:02 -0500)]
fsl_elbc_nand: Hard-code the FBAR/FPAR split.
The hardware has separate registers for block and page-within-block,
but the division between the two has no apparent relation to the
actual erase block size of the NAND chip.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Anton Vorontsov [Fri, 28 Mar 2008 19:10:54 +0000 (22:10 +0300)]
fsl_elbc_nand: workaround for hangs during nand write
Using current driver elbc sometimes hangs during nand write. Reading back
last byte helps though (thanks to Scott Wood for the idea).
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Fri, 21 Mar 2008 21:12:51 +0000 (16:12 -0500)]
Freescale eLBC FCM NAND driver
This is a driver for the Flash Control Machine of the enhanched Local Bus
Controller found on some Freescale chips (such as the mpc8313 and the
mpc8379).
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Tue, 18 Mar 2008 20:29:14 +0000 (15:29 -0500)]
Don't panic if a controller driver does ecc its own way.
Some hardware, such as the enhanced local bus controller used on some
mpc83xx chips, does ecc transparently when reading and writing data, rather
than providing a generic calculate/correct mechanism that can be exported to
the nand subsystem.
The subsystem should not BUG() when calculate, correct, or hwctl are
missing, if the methods that call them have been overridden.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Stefan Roese [Thu, 10 Jan 2008 17:47:33 +0000 (18:47 +0100)]
NAND: Make NAND driver less verbose per default
This patch turns off printing of bad blocks per default upon bootup.
This can always be shown via the "nand bad" command later.
Signed-off-by: Stefan Roese <sr@denx.de>
Sergey Kubushyn [Wed, 9 Jan 2008 14:36:20 +0000 (15:36 +0100)]
NAND: Davinci driver updates
Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
don't have hardware handy so I can not test it at the moment but changes are
rather trivial so it should work. It would be nice if somebody with a
hardware checked it anyways.
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Stefan Roese [Sat, 5 Jan 2008 15:50:32 +0000 (16:50 +0100)]
NAND: Fix compilation warning and small coding style issue
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 Jan 2008 15:49:37 +0000 (16:49 +0100)]
NAND: Update nand_spl driver to match updated nand subsystem
This patch changes the NAND booting driver nand_spl/nand_boot.c to match
the new infrastructure from the updated NAND subsystem. This NAND
subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
subsystem.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 Jan 2008 15:47:58 +0000 (16:47 +0100)]
NAND: Update 4xx NDFC driver to match updated nand subsystem
This patch changes the 4xx NAND driver ndfc.c to match the new
infrastructure from the updated NAND subsystem. This NAND
subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
subsystem.
Tested successfully on AMCC Sequoia and Bamboo.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 Jan 2008 15:43:25 +0000 (16:43 +0100)]
NAND: Change nand_wait_ready() to not call nand_wait()
This patch changes nand_wait_ready() to not just call nand_wait(),
since this will send a new command to the NAND chip. We just want to
wait for the chip to become ready here.
Signed-off-by: Stefan Roese <sr@denx.de>
William Juul [Fri, 14 Dec 2007 15:33:45 +0000 (16:33 +0100)]
make nand dump and nand dump.oob work
Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
William Juul [Mon, 19 Nov 2007 13:46:00 +0000 (14:46 +0100)]
moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
Signed-off-by: William Juul <william.juul@tandberg.com>
William Juul [Tue, 10 Jun 2008 21:18:13 +0000 (16:18 -0500)]
Clean out unneeded files
Signed-off-by: William Juul <william.juul@tandberg.com>
William Juul [Fri, 16 Nov 2007 07:44:27 +0000 (08:44 +0100)]
Create symlinks from yaffs2/direct to yaffs2
Signed-off-by: William Juul <william.juul@tandberg.com>
William Juul [Thu, 15 Nov 2007 11:23:57 +0000 (12:23 +0100)]
Incorporate yaffs2 into U-boot
To use YAFFS2 define CONFIG_YAFFS2
Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
William Juul [Thu, 15 Nov 2007 10:13:05 +0000 (11:13 +0100)]
YAFFS2 import
Direct import of yaffs as a tarball as of
20071113 from their public
CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
The code can also be imported on the command line with:
export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
(Hit return when asked for a password)
cvs checkout yaffs2
Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
William Juul [Wed, 14 Nov 2007 13:28:11 +0000 (14:28 +0100)]
Whitespace cleanup and marking broken code.
Changes requested by maintainer Stefan Roese after
posting patch to U-boot mailing list.
Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
William Juul [Fri, 9 Nov 2007 12:32:30 +0000 (13:32 +0100)]
Fixing coding style issues
- Fixing leading white spaces
- Fixing indentation where 4 spaces are used instead of tab
- Removing C++ comments (//), wherever I introduced them
Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
William Juul [Thu, 8 Nov 2007 09:39:53 +0000 (10:39 +0100)]
Remove white space at end.
Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
William Juul [Wed, 31 Oct 2007 12:53:06 +0000 (13:53 +0100)]
Update MTD to that of Linux 2.6.22.1
A lot changed in the Linux MTD code, since it was last ported from
Linux to U-Boot. This patch takes U-Boot NAND support to the level
of Linux 2.6.22.1 and will enable support for very large NAND devices
(4KB pages) and ease the compatibility between U-Boot and Linux
filesystems.
This patch is tested on two custom boards with PPC and ARM
processors running YAFFS in U-Boot and Linux using gcc-4.1.2
cross compilers.
MAKEALL ppc/arm has some issues:
* DOC/OneNand/nand_spl is not building (I have not tried porting
these parts, and since I do not have any HW and I am not familiar
with this code/HW I think its best left to someone else.)
Except for the issues mentioned above, I have ported all drivers
necessary to run MAKEALL ppc/arm without errors and warnings. Many
drivers were trivial to port, but some were not so trivial. The
following drivers must be examined carefully and maybe rewritten to
some degree:
cpu/ppc4xx/ndfc.c
cpu/arm926ejs/davinci/nand.c
board/delta/nand.c
board/zylonite/nand.c
Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Wolfgang Denk [Tue, 12 Aug 2008 14:08:38 +0000 (16:08 +0200)]
Coding style cleanup, update CHANGELOG, prepare release
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 12 Aug 2008 12:54:04 +0000 (14:54 +0200)]
MVBC_P: fix compile problem
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 12 Aug 2008 10:10:11 +0000 (12:10 +0200)]
MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 12 Aug 2008 09:47:54 +0000 (11:47 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Tue, 12 Aug 2008 09:46:56 +0000 (11:46 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-arm
Wolfgang Denk [Mon, 11 Aug 2008 22:36:53 +0000 (00:36 +0200)]
ads5121: fix compiler warnings (unused variables)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 11 Aug 2008 22:13:57 +0000 (00:13 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Kumar Gala [Mon, 11 Aug 2008 16:29:28 +0000 (11:29 -0500)]
85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
Use CONFIG_NUM_CPUS to match existing define used by 86xx.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
Kumar Gala [Mon, 11 Aug 2008 14:20:53 +0000 (09:20 -0500)]
Fix fallout from autostart revert
The autostart revert caused a bit of duplicated code as well as
code that was using images->autostart that needs to get removed so
we can build again.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 11 Aug 2008 14:16:25 +0000 (09:16 -0500)]
Fix compile error related to r8a66597-hcd & usb
When building the 8544DS board we get this error:
In file included from r8a66597-hcd.c:22:
u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
make[1]: *** [r8a66597-hcd.o] Error 1
The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
is set.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Becky Bruce [Mon, 4 Aug 2008 19:02:26 +0000 (14:02 -0500)]
POWERPC 86xx: Move BAT setup code to C
This is needed because we will be possibly be locating
devices at physical addresses above 32bits, and the asm
preprocessing does not appear to deal with ULL constants
properly. We now call write_bat in lib_ppc/bat_rw.c.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Becky Bruce [Mon, 4 Aug 2008 19:01:53 +0000 (14:01 -0500)]
POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
Perform sync/isync as required by the architecture.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Becky Bruce [Mon, 4 Aug 2008 19:01:16 +0000 (14:01 -0500)]
POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Magnus Lilja [Sun, 3 Aug 2008 19:44:10 +0000 (21:44 +0200)]
i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
contacts instead of only the first 256 ones as is the case prior to
this patch.
Add missing MUX_* macros and update board files to use the new macros.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Magnus Lilja [Sun, 3 Aug 2008 19:43:37 +0000 (21:43 +0200)]
i.MX31: Fix IOMUX related typos
Correct the names of some IOMUX macros.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Steve Sakoman [Mon, 11 Aug 2008 18:26:16 +0000 (20:26 +0200)]
OneNAND: Remove unused parameters to onenand_verify_page
The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Stefan Roese [Mon, 11 Aug 2008 04:43:38 +0000 (06:43 +0200)]
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
Anatolij Gustschin [Fri, 8 Aug 2008 16:00:40 +0000 (18:00 +0200)]
video: fix bug in cfb_console code
FILL_15BIT_555RGB macro extension for pixel swapping
by commit
bed53753dd1d7e6bcbea4339be0fb7760214cc35
introduced a bug in cfb_console:
Bitmaps with odd-numbered width won't be rendered
correctly and even U-Boot crashes are observed on
some platforms while repeated rendering of such
bitmaps with "bmp display". Also if a bitmap is
rendered to an odd-numbered x starting position,
the same problem occurs. This patch is an attempt
to fix it.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Fri, 8 Aug 2008 16:00:39 +0000 (18:00 +0200)]
video: fix bug in logo_plot
If logo_plot() should ever be called with x starting
position other than zero and for pixel depths greater
than 8bpp, logo colors distortion will be observed.
This patch fixes the issue.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Wolfgang Denk [Sun, 10 Aug 2008 22:17:52 +0000 (00:17 +0200)]
MAINTAINERS: sort entries
Signed-off-by: Wolfgang Denk <wd@denx.de>
Roy Zang [Thu, 7 Aug 2008 10:19:28 +0000 (18:19 +0800)]
Add mpc7448hpc2 maintainer information
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Gururaja Hebbar K R [Thu, 7 Aug 2008 07:43:27 +0000 (13:13 +0530)]
common/cmd_load.c - Minor code & Coding Style cleanup
- os_data_header Variable is a carry over feature
& unused. So removed all instance of this variable
- Minor Code Style Update
Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Magnus Lilja [Wed, 6 Aug 2008 17:32:33 +0000 (19:32 +0200)]
Update the U-Boot wiki URL.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
dirk.behme@googlemail.com [Sun, 10 Aug 2008 15:56:36 +0000 (17:56 +0200)]
OneNAND: Remove base address offset usage
While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
using OneNAND and some using NAND, we found some differences in OneNAND and
NAND command address handling.
As this might confuse users (it already confused us), we like to align OneNAND
and NAND address handling.
The issue is that cmd_onenand.c subtracts the onenand base address from the
addresses you type into the u-boot command line so, unlike nand, you can't
use addresses relative to the start of the onenand part e.g. this won't work:
onenand read
82000000 280000 400000
you have to use:
onenand read
82000000 20280000 400000
Looking at recent git, the only board currently using OneNAND is Apollon, and
for this the OneNAND base address is 0 (apollon.h)
#define CFG_ONENAND_BASE 0x00000000
so patch below won't break any existing boards and will align OneNAND and NAND
handling on boards where OneNAND base address is != 0.
Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Kumar Gala [Thu, 7 Aug 2008 14:28:20 +0000 (09:28 -0500)]
mpc85xx: workaround old binutils bug
The recent change to move the .bss outside of the image gives older
binutils (ld from eldk4.1/binutils-2.16) some headache:
ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
ppc_85xx-ld: final link failed: Bad value
We workaround it by being explicit about the program headers and not
assigning the .bss to a program header.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Sat, 9 Aug 2008 23:26:26 +0000 (01:26 +0200)]
Revert "[new uImage] Add autostart flag to bootm_headers structure"
This reverts commit
f5614e7926863bf0225ec860d9b319741a9c4004.
The commit was based on a misunderstanding of the (documented)
meaning of the 'autostart' environment variable. It might cause
boards to hang if 'autostart' was used, with the potential to brick
them. Go back to the documented behaviour.
Conflicts:
common/cmd_bootm.c
common/image.c
include/image.h
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 9 Aug 2008 23:04:50 +0000 (01:04 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-at91
Wolfgang Denk [Sat, 9 Aug 2008 23:04:17 +0000 (01:04 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
Wolfgang Denk [Sat, 9 Aug 2008 23:02:27 +0000 (01:02 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Wolfgang Denk [Sat, 9 Aug 2008 23:01:41 +0000 (01:01 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Wolfgang Denk [Sat, 9 Aug 2008 22:51:26 +0000 (00:51 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc512x
Wolfgang Denk [Sat, 9 Aug 2008 21:17:32 +0000 (23:17 +0200)]
TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
- enable CFI driver where this was forgotten
- enable mtdparts support
- adjust default environment
etc.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Peter Tyser [Tue, 5 Aug 2008 15:51:57 +0000 (10:51 -0500)]
FIT: Fix handling of images without ramdisks
boot_get_ramdisk() should not treat the case when a FIT image does
not contain a ramdisk as an error.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Sergey Lapin [Fri, 8 Aug 2008 21:39:09 +0000 (01:39 +0400)]
DataFlash: AT45DB021 fix and AT45DB081 support
Fix for page size of AT45DB021. Also adding bigger AT45DB081
which comes with some newer boards.
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Nobuhiro Iwamatsu [Fri, 8 Aug 2008 07:30:23 +0000 (16:30 +0900)]
sh: Update sh7763rdp config
Add sh_eth support to sh7763rdp.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Wolfgang Denk [Sun, 6 Jul 2008 23:22:29 +0000 (01:22 +0200)]
TQM823L: re-enable logo support; update LCD_INFO text
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Fri, 8 Aug 2008 14:41:56 +0000 (16:41 +0200)]
TQM8xxL: fix support for second flash bank
When switching the TQM8xxL modules to use the CFI flash driver,
support for the second flash bank was broken because the CFI driver
did not support dynamically sized banks. This gets fixed now.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Fri, 8 Aug 2008 14:39:54 +0000 (16:39 +0200)]
CFI: allow for dynamically determined flash sizes and addresses
The CFI driver allowed only for static initializers in the
CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
several flash banks contiguously if the bank sizes were not known in
advance, which kind of violates U-Boot's design philosophy.
(will be used for example by the TQM8xxL boards)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Ben Warren [Fri, 8 Aug 2008 06:26:35 +0000 (23:26 -0700)]
QE UEC: Fix compiler warnings
Moved static functions earlier in file so forward declarations are not needed.
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
David Saada [Mon, 31 Mar 2008 09:37:38 +0000 (02:37 -0700)]
QE UEC: Add MII Commands
Add MII commands to the UEC driver. Note that once a UEC device is selected,
any device on its MDIO bus can be addressed.
Signed-off-by: David Saada <david.saada@ecitele.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Yoshihiro Shimoda [Wed, 9 Jul 2008 12:07:38 +0000 (21:07 +0900)]
usb: add support for R8A66597 usb controller
add support for Renesas R8A66597 usb controller.
This patch supports USB Host mode.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Hunter, Jon [Sat, 26 Jul 2008 23:59:16 +0000 (18:59 -0500)]
Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Steven A. Falco [Wed, 6 Aug 2008 19:42:52 +0000 (15:42 -0400)]
ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
configuration to match the schematic, and also sets the SDR0_PFC1 register to
select the corresponding mode for the UARTs.
Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Kenneth Johansson [Tue, 15 Jul 2008 10:13:38 +0000 (12:13 +0200)]
mpc5121: Move iopin features from board specific to common files.
And in the process eliminate some duplicate register defines.
Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
John Rigby [Tue, 5 Aug 2008 23:38:57 +0000 (17:38 -0600)]
mpc5121: squash some fdt fixup errors
On ADS5121 when booting linux the following errors are seen:
Unable to update property /soc5121@
80000000:bus-frequency, err=FDT_ERR_NOTFOUND
Unable to update property /soc5121@
80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
Unable to update property /soc5121@
80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
This is caused by ft_cpu_setup trying to deal with
both old and new soc node naming. This patch
fixes this by being smarter about what to
fixup.
Also do soc node fixups by compatible instead of by path.
A new board config called OF_SOC_COMPAT defined
to be "fsl,mpc5121-immr" replaces the old
OF_SOC node path that was defined to be "soc@
80000000".
Old device trees still work, but the compatiblity
is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
which is on by default in include/configs/ads5121.h.
Signed-off-by: John Rigby <jrigby@freescale.com>
Markus Klotzbuecher [Mon, 4 Aug 2008 17:18:14 +0000 (19:18 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot
Jean-Christophe PLAGNIOL-VILLARD [Sat, 2 Aug 2008 21:48:30 +0000 (23:48 +0200)]
drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 2 Aug 2008 21:48:32 +0000 (23:48 +0200)]
nios2/sysid: fix printf warning
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 2 Aug 2008 21:48:33 +0000 (23:48 +0200)]
Fix remaining build issues with MPC8xx FADS boards.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 2 Aug 2008 21:48:31 +0000 (23:48 +0200)]
nios2: fix phys_addr_t and phys_size_t support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 2 Aug 2008 21:48:34 +0000 (23:48 +0200)]
mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Fri, 1 Aug 2008 19:57:32 +0000 (21:57 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/master/
Mark Jackson [Fri, 1 Aug 2008 08:48:29 +0000 (09:48 +0100)]
Fix bitmap display for atmel lcd controller
The current lcd_display_bitmap() function does not work properly
for the Atmel LCD controller.
2 fixes need to be done:-
(a) when setting the colour map, use the lcd_setcolreg() function
as provided by the Atmel driver
(b) the data is never actually written to the lcd framebuffer !!
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 1 Aug 2008 06:40:34 +0000 (08:40 +0200)]
qemu_mips: update README to follow qemu update about default machine
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
TsiChung Liew [Fri, 1 Aug 2008 00:53:21 +0000 (19:53 -0500)]
ColdFire: Fix compilation issue caused by a missing function
Implement usec2ticks() which is used by fsl_i2c.c in
lib_m68k/time.c
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Fri, 1 Aug 2008 00:53:06 +0000 (19:53 -0500)]
Fix compilation error for TASREG
TASREG is ColdFire platform, the include ppc4xx.h in
board/esd/common/flash.c causes conflict.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Fri, 1 Aug 2008 00:52:36 +0000 (19:52 -0500)]
Fix compilation error for MCF5275
Rename OBJ to COBJ in board/platform/Makefile
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Fri, 1 Aug 2008 00:52:28 +0000 (19:52 -0500)]
Fix compile error caused by incorrect function return type
Rename int mii_init(void) to void mii_init(void) for idmr
ColdFire platform
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Wolfgang Denk [Fri, 1 Aug 2008 10:06:22 +0000 (12:06 +0200)]
Fix build issues with MPC8xx FADS boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 31 Jul 2008 15:54:03 +0000 (17:54 +0200)]
Prepare v1.3.4-rc2: update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 31 Jul 2008 15:50:37 +0000 (17:50 +0200)]
Merge branch 'master' of ssh://10.10.0.7/home/wd/git/u-boot/master
Mark Jackson [Thu, 31 Jul 2008 15:09:00 +0000 (16:09 +0100)]
Add gzipped logo support
The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
If this option is set, additionally to standard BMP
images, gzipped BMP images can be displayed via the
splashscreen support or the bmp command.
However, the splashscreen function *only* supports standard BMP images.
This patch adds the documented gzip support.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>