Felix Fietkau [Wed, 22 Oct 2014 13:32:12 +0000 (13:32 +0000)]
ath9k: merge ar9580/ar955x initval updates
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43029
Felix Fietkau [Wed, 22 Oct 2014 13:32:06 +0000 (13:32 +0000)]
ath9k: merge a regulatory handling fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43028
Jo-Philipp Wich [Wed, 22 Oct 2014 11:30:07 +0000 (11:30 +0000)]
linux: add kmod-hwmon-k10temp
This module is required to read the CPU core temperature sensors
on the Alix APU board.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43027
Felix Fietkau [Wed, 22 Oct 2014 11:02:18 +0000 (11:02 +0000)]
ar71xx: add support for buffalo WZR-450HP2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43026
Felix Fietkau [Wed, 22 Oct 2014 10:47:26 +0000 (10:47 +0000)]
Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"
This seems to cause issues on some build hosts, and it is not that
important.
SVN-Revision: 43025
Felix Fietkau [Wed, 22 Oct 2014 08:57:56 +0000 (08:57 +0000)]
kernel: use .ONESHELL to speed up processing of many kmod-* packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43024
Felix Fietkau [Wed, 22 Oct 2014 08:57:50 +0000 (08:57 +0000)]
build: only print skipped packages that were selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43023
Felix Fietkau [Wed, 22 Oct 2014 08:57:45 +0000 (08:57 +0000)]
kernel: use /bin/sh instead of bash to speed up processing of many kmod-* packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43022
Felix Fietkau [Wed, 22 Oct 2014 08:57:40 +0000 (08:57 +0000)]
build: use ONESHELL to speed up scanning and the toplevel makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43021
Felix Fietkau [Wed, 22 Oct 2014 08:57:30 +0000 (08:57 +0000)]
include/shell.sh: remove getvar()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43020
Felix Fietkau [Wed, 22 Oct 2014 08:57:25 +0000 (08:57 +0000)]
build: optimize target metadata dump
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43019
Felix Fietkau [Wed, 22 Oct 2014 08:57:20 +0000 (08:57 +0000)]
rules.mk: reduce shexport to one line to allow it to be put in a target context
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43018
Felix Fietkau [Wed, 22 Oct 2014 08:57:16 +0000 (08:57 +0000)]
build: clean up and optimize ipkg control generator code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43017
Felix Fietkau [Wed, 22 Oct 2014 08:57:11 +0000 (08:57 +0000)]
build: do not process built-in rules for make subdirs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43016
Felix Fietkau [Wed, 22 Oct 2014 08:57:07 +0000 (08:57 +0000)]
build: optimize printing of disabled packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43015
Felix Fietkau [Tue, 21 Oct 2014 20:32:05 +0000 (20:32 +0000)]
comgt: drop the use of the non-standard XCASE termios flag (#18186)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43014
Steven Barth [Tue, 21 Oct 2014 20:00:56 +0000 (20:00 +0000)]
nftables: bump to latest, fix minigmp
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43013
Steven Barth [Tue, 21 Oct 2014 20:00:46 +0000 (20:00 +0000)]
libnftnl: bump to latest
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43012
Felix Fietkau [Tue, 21 Oct 2014 16:30:01 +0000 (16:30 +0000)]
ath9k: merge a fix for queue start/stop handling (fixes #18164, #18130)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43011
Rafał Miłecki [Tue, 21 Oct 2014 14:37:44 +0000 (14:37 +0000)]
bcm53xx: add support for Asus RT-N18U LEDs & buttons
Got GPIOs from #18152 thanks to Grrruk
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43010
Felix Fietkau [Tue, 21 Oct 2014 11:03:20 +0000 (11:03 +0000)]
musl: fix getopt optional argument processing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43009
Rafał Miłecki [Mon, 20 Oct 2014 22:09:40 +0000 (22:09 +0000)]
bcm53xx: switch RT-N18U firmware to the UBI
According to the ticket #18152 it also uses NAND with 0x20000 erase size
and 0x800 page size.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43008
Felix Fietkau [Mon, 20 Oct 2014 20:09:35 +0000 (20:09 +0000)]
netifd: update to the latest version, fixes link status handling on VLAN devices (#18106)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43007
Felix Fietkau [Mon, 20 Oct 2014 15:07:19 +0000 (15:07 +0000)]
base-files: fix telnet login on musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43006
Felix Fietkau [Mon, 20 Oct 2014 13:55:11 +0000 (13:55 +0000)]
rpcd: add 802.11ac for iwinfo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43005
Felix Fietkau [Mon, 20 Oct 2014 11:43:08 +0000 (11:43 +0000)]
binutils: remove linaro version string, it confuses gcc lto support detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43004
Felix Fietkau [Mon, 20 Oct 2014 11:42:59 +0000 (11:42 +0000)]
gcc: update 4.9 to linaro 2014.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43003
John Crispin [Mon, 20 Oct 2014 11:19:53 +0000 (11:19 +0000)]
openssl: host build fails when ccache is enabled
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43002
John Crispin [Mon, 20 Oct 2014 11:19:21 +0000 (11:19 +0000)]
hostapd: Add wpa_psk_file option to netifd.sh
The wpa_psk_file option offers the possibility to use a different WPA-PSK key for each client. The directive points to a file with the following syntax:
mac_address wpa_passphrase_or_hex_key
Example:
00:11:22:33:44:55 passphrase_for_client_1
00:11:22:33:44:67 passphrase_for_client_2
00:11:22:33:44:89
0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
So it is possible to specify both ASCII passphrases and raw 64-chars hex keys.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43001
Imre Kaloz [Mon, 20 Oct 2014 10:00:02 +0000 (10:00 +0000)]
fix compile against musl
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43000
Felix Fietkau [Mon, 20 Oct 2014 09:23:55 +0000 (09:23 +0000)]
prereq-build: rename the openssl check to libssl, add back the old check - it is required after all
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42999
Felix Fietkau [Mon, 20 Oct 2014 09:18:36 +0000 (09:18 +0000)]
firmware-utils: rename encrypt()/decrypt() in mkhilinkfw to avoid collisions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42998
Felix Fietkau [Mon, 20 Oct 2014 09:18:21 +0000 (09:18 +0000)]
Revert "openssl: add host build."
This reverts commit r42988
SVN-Revision: 42997
Felix Fietkau [Mon, 20 Oct 2014 09:18:02 +0000 (09:18 +0000)]
tools: revert faulty dependency on package stuff
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42996
Felix Fietkau [Mon, 20 Oct 2014 09:17:56 +0000 (09:17 +0000)]
prereq-build: replace the openssl command check with a check for headers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42995
John Crispin [Mon, 20 Oct 2014 06:48:51 +0000 (06:48 +0000)]
ramips: revert
1d5afc012e9d3eef0b113e1a89cff7508b731f90
the submitted patch was bogus
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42994
John Crispin [Mon, 20 Oct 2014 06:29:58 +0000 (06:29 +0000)]
ar71xx: unify usage of IMAGE_PROFILE instead of PROFILE.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42992
John Crispin [Mon, 20 Oct 2014 06:29:51 +0000 (06:29 +0000)]
ramips: add comments for image/Makefile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42991
John Crispin [Mon, 20 Oct 2014 06:29:44 +0000 (06:29 +0000)]
ar71xx: add comments for Image/BuildLoader{, Alone}.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42990
John Crispin [Mon, 20 Oct 2014 06:29:38 +0000 (06:29 +0000)]
firmware-utils: restore compilation of mkhilinkfw.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42989
John Crispin [Mon, 20 Oct 2014 06:29:27 +0000 (06:29 +0000)]
openssl: add host build.
Only support Linux at the moment.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42988
John Crispin [Mon, 20 Oct 2014 06:29:21 +0000 (06:29 +0000)]
build: add $(STAGING_DIR_HOST)/usr/{include, lib} to build search path.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42987
John Crispin [Mon, 20 Oct 2014 06:29:13 +0000 (06:29 +0000)]
firmware-utils: fix compilation warnings.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42986
John Crispin [Mon, 20 Oct 2014 06:29:05 +0000 (06:29 +0000)]
failsafe-mode: print short help on commandline
[base-files] failsafe-mode: print short help on commandline
Like mentioned in ticket https://dev.openwrt.org/ticket/11911
this should make the IRC much quieter. Failsafe is somehow
special and even experienced users are helpless, because they
are not used to this seldom situation. Also: likely you have
no internet access in this mode, so you cannot use the wiki.
a failsafe-session now looks like this:
first we see from 'package/base-files/files/bin/login.sh' the hint:
=== IMPORTANT ============================
Use 'passwd' to set your login password
this will disable telnet and enable SSH
------------------------------------------
after this the /etc/banner ("OpenWrt - wireless freedom")
and then the new text:
================= FAILSAFE MODE active ================
special commands:
* firstboot reset settings to factory defaults
* mount_root mount root-partition with config files
after mount_root:
* passwd change root's password
* /etc/config directory with config files
for more help see:
http://wiki.openwrt.org/doc/howto/generic.failsafe
=======================================================
this supersedes the old patches:
http://patchwork.openwrt.org/patch/3337/
http://patchwork.openwrt.org/patch/3553/
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 42985
John Crispin [Mon, 20 Oct 2014 06:28:57 +0000 (06:28 +0000)]
kernel: add another missing symbol for 3.14
SENSORS_VEXPRESS is masked by HWMON
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 42984
John Crispin [Mon, 20 Oct 2014 06:28:48 +0000 (06:28 +0000)]
ramips: add support for Nexx WT3020 devices
SVN-Revision: 42983
John Crispin [Mon, 20 Oct 2014 06:28:39 +0000 (06:28 +0000)]
ramips: sort boards in upgrade/platform.sh alphabetically
SVN-Revision: 42982
Felix Fietkau [Sun, 19 Oct 2014 23:04:17 +0000 (23:04 +0000)]
iproute2: fix musl build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42981
Felix Fietkau [Sun, 19 Oct 2014 23:04:02 +0000 (23:04 +0000)]
authsae: fix musl build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42980
Felix Fietkau [Sun, 19 Oct 2014 22:49:42 +0000 (22:49 +0000)]
gdb: update to version 7.8, fix musl build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42979
Felix Fietkau [Sun, 19 Oct 2014 22:35:27 +0000 (22:35 +0000)]
valgrind: update to the latest version, fix musl support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42978
Felix Fietkau [Sun, 19 Oct 2014 21:57:28 +0000 (21:57 +0000)]
toolchain: mark musl as non-broken
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42977
Felix Fietkau [Sun, 19 Oct 2014 21:46:08 +0000 (21:46 +0000)]
base-files: fix ldd definition if /usr/bin/ldd exists
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42976
Felix Fietkau [Sun, 19 Oct 2014 21:46:03 +0000 (21:46 +0000)]
toolchain: drop the mips softfloat symlink hack
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42975
Felix Fietkau [Sun, 19 Oct 2014 21:45:58 +0000 (21:45 +0000)]
toolchain: when using musl, install a symlink from ld-musl-*.so to /usr/bin/ldd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42974
Felix Fietkau [Sun, 19 Oct 2014 21:45:51 +0000 (21:45 +0000)]
gcc: do not assume that the Mac OS X filesystem is case insensitive
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42973
Felix Fietkau [Sun, 19 Oct 2014 21:45:45 +0000 (21:45 +0000)]
mountd: explicitly link libubox (needed by libuci)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42972
Felix Fietkau [Sun, 19 Oct 2014 21:45:41 +0000 (21:45 +0000)]
musl: update to version 1.1.5
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42971
Felix Fietkau [Sun, 19 Oct 2014 21:45:36 +0000 (21:45 +0000)]
gcc: update, split and rework 4.9 musl patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42970
Felix Fietkau [Sun, 19 Oct 2014 21:45:28 +0000 (21:45 +0000)]
gcc: update, split and rework 4.8 musl patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42969
Jo-Philipp Wich [Sun, 19 Oct 2014 20:28:43 +0000 (20:28 +0000)]
x86_64: fix invoking sysupgrade on PARTUUID mounted system
Fix sysupgrade to determine the correct boot block device to use if
/proc/cmdline contains a PARTUUID root.
Change the preinit move_config() hook to use the UUID scanning code
from sysupgrade in order to avoid code duplication.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42968
Jo-Philipp Wich [Sun, 19 Oct 2014 17:58:46 +0000 (17:58 +0000)]
x86_64: unbreak squashfs images
Enable the required squashfs and block2mtd support in the kernel in order
to be able to actually boot them.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42967
Jo-Philipp Wich [Sun, 19 Oct 2014 17:46:37 +0000 (17:46 +0000)]
x86_64: use default block2mtd timeout of 5s
If the underlying block device is a USB device it might require some
time to settle, observed when booting a squashfs image from sd card
on an Alix APU board.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42966
Jo-Philipp Wich [Sun, 19 Oct 2014 17:13:50 +0000 (17:13 +0000)]
x86_64: sysupgrade: consider hdX and vdX devices as well
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42965
Felix Fietkau [Sun, 19 Oct 2014 16:19:07 +0000 (16:19 +0000)]
openssl: add ABI_VERSION to fix package rebuild issues (fixes #18169)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42963
Felix Fietkau [Sun, 19 Oct 2014 16:18:56 +0000 (16:18 +0000)]
gcc: backport an upstream fix for extern vars with local weak definitions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42962
Felix Fietkau [Sun, 19 Oct 2014 09:43:31 +0000 (09:43 +0000)]
polarssl: do not build the unused programs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42960
Felix Fietkau [Sun, 19 Oct 2014 08:46:00 +0000 (08:46 +0000)]
rpcd: update to the latest version, fixes build after libubox update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42959
Felix Fietkau [Sun, 19 Oct 2014 08:45:56 +0000 (08:45 +0000)]
ramips: fix usercfg partition offset for WHR-1166D
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42958
Felix Fietkau [Sat, 18 Oct 2014 19:25:30 +0000 (19:25 +0000)]
ar71xx: disable irq on reboot to fix hang issues (fixes #17839)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42955
Felix Fietkau [Sat, 18 Oct 2014 19:25:24 +0000 (19:25 +0000)]
toolchain: fix binutils broken symlink
The Makefile for binutils creates a broken symlink to "binutils-linaro" in
"trunk/build_dir/toolchain-<target>_gcc-4.9-linaro_uClibc-0.9.33.2".
Modify the Makefile to point the symlink to the correct directory.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 42954
Felix Fietkau [Sat, 18 Oct 2014 17:39:04 +0000 (17:39 +0000)]
mac80211: add a maintenance script for upstream backport commits
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42953
Felix Fietkau [Sat, 18 Oct 2014 17:38:59 +0000 (17:38 +0000)]
mac80211: update to 2014-10-08
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42952
Steven Barth [Sat, 18 Oct 2014 15:47:31 +0000 (15:47 +0000)]
odhcpd: fix regression in dhcpv6 t1 and t2 calculation
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42951
Felix Fietkau [Sat, 18 Oct 2014 09:20:38 +0000 (09:20 +0000)]
polarssl: add missing version bump
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42949
Felix Fietkau [Sat, 18 Oct 2014 09:17:31 +0000 (09:17 +0000)]
polarssl: disable SSLv3 support, fixes CVE-2014-3566 (POODLE)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42947
Jo-Philipp Wich [Fri, 17 Oct 2014 22:50:38 +0000 (22:50 +0000)]
x86_64: support sysupgrade config restore on PARTUUID mounted disks
Fix the move_config() procedure to properly find the corresponding disk if
the rootfs was mounted by PARTUUID instead of a device node.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42946
Jo-Philipp Wich [Fri, 17 Oct 2014 13:09:37 +0000 (13:09 +0000)]
x86_64: add kmod-r8169 to the default packages
This kmod is required by the Alix APU 1D4 to be reachable after
installing an x86-64 image.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42945
Steven Barth [Fri, 17 Oct 2014 11:18:52 +0000 (11:18 +0000)]
odhcpd: multiple fixes
* Rewrite ndp proxy using kernel proxying
* Aid flash-renumbering in hybrid DHCPv6-mode
* Unicast RAs to RS senders
* Add support for router address
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42944
Steven Barth [Fri, 17 Oct 2014 06:15:35 +0000 (06:15 +0000)]
hostapd: CVE-2014-3686 fixes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42942
Rafał Miłecki [Thu, 16 Oct 2014 21:33:34 +0000 (21:33 +0000)]
bcm53xx: image: switch Netgear and Buffalo devices to UBI
We still don't have a smart sysupgrade method, but at least we can use
UBI which provides some protection for rootfs (SquashFS).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42941
Rafał Miłecki [Thu, 16 Oct 2014 20:52:22 +0000 (20:52 +0000)]
bcm53xx: hack UBI to erase all dirty blocks left by CFE
UBI requires PEBs to be formatted (with a valid UBI header) or empty
(0xFF), however CFE doesn't clear blocks after flashing the image. To
workaround this problem, teach UBI to recognize EOF mark in a similar
way JFFS2 handles that in OpenWrt.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42940
Rafał Miłecki [Thu, 16 Oct 2014 20:50:36 +0000 (20:50 +0000)]
bcm53xx: enable UBI and UBIFS
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42939
Rafał Miłecki [Thu, 16 Oct 2014 20:48:56 +0000 (20:48 +0000)]
bcm53xx: image: build UBI partition image
This could be used on NAND devices once we get UBI working.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42938
Rafał Miłecki [Thu, 16 Oct 2014 20:44:44 +0000 (20:44 +0000)]
bcm53xx: image: specify flash type for all devices
This will allow us to add proper support for NAND one day.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42937
Jo-Philipp Wich [Thu, 16 Oct 2014 16:28:16 +0000 (16:28 +0000)]
x86_64: initial support for PARTUUID
This change configures grub to mount the rootfs by PARTUUID instead of the
device path if CONFIG_TARGET_ROOTFS_PARTNAME is unset.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42936
Jo-Philipp Wich [Thu, 16 Oct 2014 16:28:12 +0000 (16:28 +0000)]
sdk: improve feed setup
- Add current buildroot scm url as base feed to feeds.conf
- Prefer feeds.conf over feeds.conf.default when generating the SDK feeds.conf.default
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42935
Jo-Philipp Wich [Thu, 16 Oct 2014 16:16:47 +0000 (16:16 +0000)]
firmware-utils: allow passing a specific MBR signature to ptgen
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42934
Jo-Philipp Wich [Thu, 16 Oct 2014 10:30:16 +0000 (10:30 +0000)]
build: improve feed handling for opkg.conf
- Consider not installed feeds as well
- Add option to decide whether to comment disabled feeds
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42931
Jo-Philipp Wich [Thu, 16 Oct 2014 08:32:54 +0000 (08:32 +0000)]
openssl: update to v1.0.1j (CVE-2014-3513, CVE-2014-3567, CVE-2014-3568)
Also refresh patches and bump copyright year in Makefile.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42929
John Crispin [Wed, 15 Oct 2014 17:55:13 +0000 (17:55 +0000)]
default_postinst() fix wrong call of group_add
[base-files] default_postinst() fix wrong call of group_add
after
12bae65d07d29854204715cebc1ef1eae237fd9b group_add is
always called. shell scripting can be tricky...
wrong call:
[ -n "$gid" ] && group_exists $name || group_add $name $gid
this leads to a call of 'group_add' when $gid is emtpy, proof:
root@box:~ functionA() { echo A; }
root@box:~ functionB() { echo B; }
root@box:~ VAR=
root@box:~ [ -n "$VAR" ] && functionA || functionB
B
root@box:~ # functionB was called, but VAR is not filled
root@box:~ VAR=filled
root@box:~ [ -n "$VAR" ] && functionA || functionB
A
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 42926
Rafał Miłecki [Wed, 15 Oct 2014 07:14:13 +0000 (07:14 +0000)]
bcm53xx: add support for Buffalo WZR-600DHP2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42925
Rafał Miłecki [Wed, 15 Oct 2014 07:12:46 +0000 (07:12 +0000)]
bcm53xx: fix Asus RT-N18U support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42924
John Crispin [Tue, 14 Oct 2014 19:01:30 +0000 (19:01 +0000)]
base-files: default_postinst() force clear luci-indexcache
Inside every LuCI package you need to clear luci-indexcache and
sometimes when installing non LuCI pacakges it's also needed to clear
it. Easier put it into default_postinst().
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 42923
John Crispin [Tue, 14 Oct 2014 19:01:21 +0000 (19:01 +0000)]
wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILL
This patch changes the code of the Wi-Fi On/Off button on the TP-Link WR1043ND v2
from KEY_WLAN to KEY_RFKILL (and renames a few constants to match). The reason
for this change is, that the KEY_WIFI button code is not recognized by the
hotplug subsystem. This means that the userspace is not notified about the
button being pressed which effectively renders it useless.
Signed-off-by: Josef Gajdusek <atx@atx.name>
SVN-Revision: 42922
John Crispin [Tue, 14 Oct 2014 19:01:16 +0000 (19:01 +0000)]
package: add libnetfilter-log.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42921
John Crispin [Tue, 14 Oct 2014 19:01:10 +0000 (19:01 +0000)]
lantiq xway: generate ramdisk image by default
The installation process on nand-based boards using ubi
like the BTHOMEHUBV2B makes use of a ramdisk image, so it
makes sense to generate this by default.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 42920
John Crispin [Tue, 14 Oct 2014 19:01:05 +0000 (19:01 +0000)]
base-files: the USERID code path did not check for duplicate groups
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42919
John Crispin [Tue, 14 Oct 2014 15:53:05 +0000 (15:53 +0000)]
procd: update to latest git
this adds the remaining patches that Michel Stam sent
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42918
John Crispin [Tue, 14 Oct 2014 15:53:00 +0000 (15:53 +0000)]
libubox: update to latest git
this adds a new helper for setting/overriding the signal handlers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42917
projects / librecmc / librecmc.git / log