Gabor Juhos [Fri, 15 Mar 2013 15:49:57 +0000 (15:49 +0000)]
generic: ar8216: simplify and rename ar8327_config_port
Return with the PORT_STATUS register value instead of
writing that directly into the corresponding register.
Also rename the function to ar8327_get_port_init_status.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36043
Gabor Juhos [Fri, 15 Mar 2013 15:49:55 +0000 (15:49 +0000)]
generic: ar8216: remove superfluous pdata checks
The presence of the platform data is already verified in
ar8327_hw_init, and the driver does not start without that
anyway.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36042
Felix Fietkau [Fri, 15 Mar 2013 15:22:06 +0000 (15:22 +0000)]
ath9k: add a fix to reduce the number of spurious tx hang detections
SVN-Revision: 36040
Gabor Juhos [Fri, 15 Mar 2013 14:39:51 +0000 (14:39 +0000)]
kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36039
Gabor Juhos [Fri, 15 Mar 2013 14:35:52 +0000 (14:35 +0000)]
ar71xx: build images for the TL-MR11U v2
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]
Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36038
Gabor Juhos [Fri, 15 Mar 2013 14:35:50 +0000 (14:35 +0000)]
ar71xx: rw2458n - Use eeprom (art) from wifi card
Use eeprom (art) from included wifi card, not hard coded in flash.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36037
Gabor Juhos [Fri, 15 Mar 2013 14:35:48 +0000 (14:35 +0000)]
ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779
Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36036
Felix Fietkau [Fri, 15 Mar 2013 13:58:47 +0000 (13:58 +0000)]
ath9k: fix issues with disabling rx/tx antennas
SVN-Revision: 36035
Felix Fietkau [Fri, 15 Mar 2013 13:43:55 +0000 (13:43 +0000)]
uhttpd: update to latest version, fixes an occasional crash on CGI scripts
SVN-Revision: 36034
Luka Perkov [Fri, 15 Mar 2013 01:36:53 +0000 (01:36 +0000)]
uboot-envtools: upgrade to version 2013.01.01
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36033
John Crispin [Thu, 14 Mar 2013 18:44:03 +0000 (18:44 +0000)]
fix up the mount options to match what openwrt had before using procd as pid 1
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36032
John Crispin [Thu, 14 Mar 2013 18:43:58 +0000 (18:43 +0000)]
sysupgrade was broken as procd was getting killed
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36031
John Crispin [Thu, 14 Mar 2013 18:43:54 +0000 (18:43 +0000)]
ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 36030
John Crispin [Thu, 14 Mar 2013 18:43:49 +0000 (18:43 +0000)]
fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36029
John Crispin [Thu, 14 Mar 2013 18:43:44 +0000 (18:43 +0000)]
select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36028
John Crispin [Thu, 14 Mar 2013 18:43:39 +0000 (18:43 +0000)]
fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36027
John Crispin [Thu, 14 Mar 2013 18:43:34 +0000 (18:43 +0000)]
build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36026
John Crispin [Thu, 14 Mar 2013 18:43:29 +0000 (18:43 +0000)]
add vdsl firmware loader/cutter
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36025
John Crispin [Thu, 14 Mar 2013 18:43:23 +0000 (18:43 +0000)]
add vdsl mei driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36024
John Crispin [Thu, 14 Mar 2013 18:43:18 +0000 (18:43 +0000)]
add vdsl driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36023
John Crispin [Thu, 14 Mar 2013 18:43:13 +0000 (18:43 +0000)]
add vdsl userland app
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36022
John Crispin [Thu, 14 Mar 2013 18:43:07 +0000 (18:43 +0000)]
make DEU work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36021
John Crispin [Thu, 14 Mar 2013 18:43:02 +0000 (18:43 +0000)]
make lib-ifxos work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36020
John Crispin [Thu, 14 Mar 2013 18:42:57 +0000 (18:42 +0000)]
make hcd driver work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36019
John Crispin [Thu, 14 Mar 2013 18:42:52 +0000 (18:42 +0000)]
make ptm drivers work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36018
John Crispin [Thu, 14 Mar 2013 18:42:47 +0000 (18:42 +0000)]
make atm driver work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36017
John Crispin [Thu, 14 Mar 2013 18:42:43 +0000 (18:42 +0000)]
make adsl work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36016
John Crispin [Thu, 14 Mar 2013 18:42:38 +0000 (18:42 +0000)]
make adsl mei driver work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36015
John Crispin [Thu, 14 Mar 2013 18:42:29 +0000 (18:42 +0000)]
bump to v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36014
John Crispin [Thu, 14 Mar 2013 18:42:21 +0000 (18:42 +0000)]
move GPHY FW blobs to non versioned folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36013
Jo-Philipp Wich [Thu, 14 Mar 2013 15:29:43 +0000 (15:29 +0000)]
firewall3: update to git head
* Introduce "option reload" for includes to specify whether includes should be processed on reload (e.g. when tapping into internal chains)
* Allow "network" and "device" commands while firewall is running (to make them usable in includes)
SVN-Revision: 36009
Florian Fainelli [Thu, 14 Mar 2013 14:45:56 +0000 (14:45 +0000)]
kernel: add support for 3.9-rc2
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36008
Florian Fainelli [Thu, 14 Mar 2013 14:45:36 +0000 (14:45 +0000)]
mac80211: backport required changes to support 3.9-rc kernels
SVN-Revision: 36007
John Crispin [Wed, 13 Mar 2013 18:29:08 +0000 (18:29 +0000)]
fix date and dependency
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36006
John Crispin [Wed, 13 Mar 2013 18:11:31 +0000 (18:11 +0000)]
make init and logread depend on !PROCD_INIT
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36005
John Crispin [Wed, 13 Mar 2013 18:11:25 +0000 (18:11 +0000)]
use new button scheme
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36004
John Crispin [Wed, 13 Mar 2013 18:11:19 +0000 (18:11 +0000)]
make basefiles aware of procd
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36003
John Crispin [Wed, 13 Mar 2013 18:11:13 +0000 (18:11 +0000)]
update the /init file to start /sbin/init
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36002
John Crispin [Wed, 13 Mar 2013 18:11:07 +0000 (18:11 +0000)]
update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36001
John Crispin [Wed, 13 Mar 2013 18:11:00 +0000 (18:11 +0000)]
make sure the console works when using procd as our pid 1
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36000
Jo-Philipp Wich [Wed, 13 Mar 2013 15:46:30 +0000 (15:46 +0000)]
firewall3: update to git head
* Adds support for emitting hotplug events when creating and clearing zones (fixes miniupnpd)
* Make NAT reflection direction configurable
* Map init script stop action to flush
* Map init script reload action to reload
* Respect init script disabled state in hotplug handler
SVN-Revision: 35998
Felix Fietkau [Wed, 13 Mar 2013 15:45:41 +0000 (15:45 +0000)]
ubus: update to latest version
SVN-Revision: 35997
Felix Fietkau [Wed, 13 Mar 2013 15:44:08 +0000 (15:44 +0000)]
libubox: update to latest version, adds libjson-script
SVN-Revision: 35996
Gabor Juhos [Tue, 12 Mar 2013 18:22:34 +0000 (18:22 +0000)]
gemini: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35995
Gabor Juhos [Tue, 12 Mar 2013 18:22:33 +0000 (18:22 +0000)]
gemini: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35994
Gabor Juhos [Tue, 12 Mar 2013 18:22:22 +0000 (18:22 +0000)]
gemini: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35993
John Crispin [Tue, 12 Mar 2013 13:53:08 +0000 (13:53 +0000)]
fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 35992
John Crispin [Tue, 12 Mar 2013 13:53:01 +0000 (13:53 +0000)]
ltq-atm: update sock api
update sock api in lantiq atm driver
The ltq-atm driver provides its own replacement for net/atm/common.c:alloc_tx(),
defined in ltq_atm.c:atm_alloc_tx().
The read of sk_wmem_alloc is done in the wrong way, starting with commit
2b85a34e911bf483c27cfdd124aeb1605145dc80 in linux mainline it has to be
done through a specific wrapper.
Signed-off-by: Luca Dariz <luca.dariz@gmail.com>
SVN-Revision: 35991
John Crispin [Tue, 12 Mar 2013 13:52:54 +0000 (13:52 +0000)]
add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 35990
John Crispin [Tue, 12 Mar 2013 13:52:47 +0000 (13:52 +0000)]
unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35989
John Crispin [Tue, 12 Mar 2013 13:52:40 +0000 (13:52 +0000)]
make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35988
John Crispin [Tue, 12 Mar 2013 13:52:33 +0000 (13:52 +0000)]
make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35987
John Crispin [Tue, 12 Mar 2013 13:52:20 +0000 (13:52 +0000)]
fixes mbssid on ralink hardware
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35986
Gabor Juhos [Tue, 12 Mar 2013 13:28:33 +0000 (13:28 +0000)]
avr32: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35985
Gabor Juhos [Tue, 12 Mar 2013 13:28:32 +0000 (13:28 +0000)]
avr32: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35984
Gabor Juhos [Tue, 12 Mar 2013 13:28:31 +0000 (13:28 +0000)]
avr32: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35983
Gabor Juhos [Tue, 12 Mar 2013 13:28:27 +0000 (13:28 +0000)]
avr32: add sysupgrade support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35982
Gabor Juhos [Tue, 12 Mar 2013 13:28:23 +0000 (13:28 +0000)]
avr32: add firmware partition
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35981
Gabor Juhos [Tue, 12 Mar 2013 13:28:21 +0000 (13:28 +0000)]
avr32: add diag support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35980
Gabor Juhos [Tue, 12 Mar 2013 13:28:19 +0000 (13:28 +0000)]
avr32: create network config dynamically
The default network configuration from base-files
is not correct for the NGW100 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35979
Gabor Juhos [Tue, 12 Mar 2013 13:28:16 +0000 (13:28 +0000)]
avr32: built the firmware images from the lzma compressed uImage
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35978
Gabor Juhos [Tue, 12 Mar 2013 07:18:37 +0000 (07:18 +0000)]
mpc52xx: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35977
Gabor Juhos [Tue, 12 Mar 2013 07:18:36 +0000 (07:18 +0000)]
mpc52xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35976
Gabor Juhos [Tue, 12 Mar 2013 07:18:34 +0000 (07:18 +0000)]
mpc52xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35975
Felix Fietkau [Tue, 12 Mar 2013 00:19:25 +0000 (00:19 +0000)]
hostapd: fix client reassociation after too many ACK failures
SVN-Revision: 35973
Gabor Juhos [Mon, 11 Mar 2013 21:02:45 +0000 (21:02 +0000)]
ramips: add profile and build image for the Upvel UR-326N4G board
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35972
Gabor Juhos [Mon, 11 Mar 2013 21:02:43 +0000 (21:02 +0000)]
ramips: add user-space support for the Upvel UR-326N4G board
[juhosg: fix mac address setup]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35971
Gabor Juhos [Mon, 11 Mar 2013 21:02:40 +0000 (21:02 +0000)]
ramips: add kernel support for the Upvel UR-326N4G board
[juhosg: add missing symbols to config-3.{7,8}]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35970
Jo-Philipp Wich [Mon, 11 Mar 2013 20:52:20 +0000 (20:52 +0000)]
firewall3: update to git head
* Fixes compilation against eglibc
* Fixes tracking logic when selectively restarting IPv4 or IPv6 firewall
* Fixes tracking logic for user chains by differentiating between reloads and restarts
* Introduces per-zone user chains {input,output,forwarding,prerouting,postrouting}_$zone_rule
* Supports legacy "tcpudp" protocol notation again
SVN-Revision: 35969
Gabor Juhos [Mon, 11 Mar 2013 19:52:54 +0000 (19:52 +0000)]
ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35966
Gabor Juhos [Mon, 11 Mar 2013 19:52:51 +0000 (19:52 +0000)]
ar71xx: add AR934X_GPIO_FUNC_* defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35965
Gabor Juhos [Mon, 11 Mar 2013 15:55:25 +0000 (15:55 +0000)]
ar71xx: makefile changes to build image for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35964
Gabor Juhos [Mon, 11 Mar 2013 15:55:23 +0000 (15:55 +0000)]
firmware-utils/mktplinkfw: Add support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35963
Gabor Juhos [Mon, 11 Mar 2013 15:55:22 +0000 (15:55 +0000)]
ar71xx: add user-space support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35962
Gabor Juhos [Mon, 11 Mar 2013 15:55:20 +0000 (15:55 +0000)]
ar71xx: add kernel support for MR3420v2
[juhosg: use gpio_request_one to enable the USB power]
Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>
SVN-Revision: 35961
Gabor Juhos [Mon, 11 Mar 2013 15:55:19 +0000 (15:55 +0000)]
ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35960
Gabor Juhos [Mon, 11 Mar 2013 15:55:17 +0000 (15:55 +0000)]
ar71xx: add profile support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35959
Gabor Juhos [Mon, 11 Mar 2013 15:55:15 +0000 (15:55 +0000)]
ar71xx: add user space support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35958
Gabor Juhos [Mon, 11 Mar 2013 15:55:13 +0000 (15:55 +0000)]
ar71xx: add kernel support for dir-835-a1
[juhosg:
- remove custom mdio bus info and platform data for ar8327, clear the
.led_cfg field from dir835a1_setup instead,
- remove arguments of dir835c1_generic_setup function, register the
LEDs directly from the board specific setup instead]
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35957
Felix Fietkau [Mon, 11 Mar 2013 02:29:53 +0000 (02:29 +0000)]
cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
SVN-Revision: 35953
Felix Fietkau [Mon, 11 Mar 2013 02:29:47 +0000 (02:29 +0000)]
cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
SVN-Revision: 35952
Felix Fietkau [Sun, 10 Mar 2013 21:59:32 +0000 (21:59 +0000)]
cns3xxx: increase number of ethernet driver rx buffers
SVN-Revision: 35951
Felix Fietkau [Sun, 10 Mar 2013 21:59:28 +0000 (21:59 +0000)]
cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
SVN-Revision: 35950
Felix Fietkau [Sun, 10 Mar 2013 21:59:21 +0000 (21:59 +0000)]
cns3xxx: minor ethernet driver cleanup
SVN-Revision: 35949
Hauke Mehrtens [Sun, 10 Mar 2013 20:42:26 +0000 (20:42 +0000)]
brcm47xx: refresh config
SVN-Revision: 35948
Hauke Mehrtens [Sun, 10 Mar 2013 20:26:28 +0000 (20:26 +0000)]
xburst: fix compilation: remove the __dev attributes
SVN-Revision: 35946
Hauke Mehrtens [Sun, 10 Mar 2013 20:25:19 +0000 (20:25 +0000)]
kernel: add some missing config options found by the buildbot.
SVN-Revision: 35945
Hauke Mehrtens [Sun, 10 Mar 2013 20:24:15 +0000 (20:24 +0000)]
mac80211: b43: increase number of rx slots to 256 again.
SVN-Revision: 35944
Felix Fietkau [Sun, 10 Mar 2013 18:25:20 +0000 (18:25 +0000)]
cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
SVN-Revision: 35943
Felix Fietkau [Sun, 10 Mar 2013 18:25:16 +0000 (18:25 +0000)]
cns3xxx: fix an rx irq handling corner case
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.
SVN-Revision: 35942
Felix Fietkau [Sun, 10 Mar 2013 18:25:11 +0000 (18:25 +0000)]
cns3xxx: fix ethernet driver memory barrier usage
SVN-Revision: 35941
Gabor Juhos [Sun, 10 Mar 2013 18:06:31 +0000 (18:06 +0000)]
realview: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35940
Gabor Juhos [Sun, 10 Mar 2013 18:06:29 +0000 (18:06 +0000)]
realview: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35939
Felix Fietkau [Sun, 10 Mar 2013 17:04:36 +0000 (17:04 +0000)]
kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
SVN-Revision: 35938
Felix Fietkau [Sun, 10 Mar 2013 17:04:31 +0000 (17:04 +0000)]
kernel: ensure that the arm exception handlers get preserved
SVN-Revision: 35937
Felix Fietkau [Sun, 10 Mar 2013 14:51:42 +0000 (14:51 +0000)]
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
SVN-Revision: 35936
Felix Fietkau [Sun, 10 Mar 2013 14:51:38 +0000 (14:51 +0000)]
kernel: remove the BROKEN dependency on the kernel export symbol strip
SVN-Revision: 35935
Gabor Juhos [Sun, 10 Mar 2013 13:24:54 +0000 (13:24 +0000)]
xburst: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35934
Gabor Juhos [Sun, 10 Mar 2013 13:24:52 +0000 (13:24 +0000)]
xburst: switch to 3.8
Compile tested only, so add broken flag.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35933
Gabor Juhos [Sun, 10 Mar 2013 13:24:50 +0000 (13:24 +0000)]
xburst: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35932
projects / librecmc / librecmc.git / log