Grant Likely [Thu, 15 Nov 2007 15:21:04 +0000 (08:21 -0700)]
Revert "Correct fixup relocation for mpc8220"
This reverts commit
a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Thu, 15 Nov 2007 15:20:57 +0000 (08:20 -0700)]
Revert "Correct fixup relocation for mpc824x"
This reverts commit
f3a52fe05923935db86985daf9438e2f70ac39aa.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Thu, 15 Nov 2007 15:20:50 +0000 (08:20 -0700)]
Revert "Correct fixup relocation for mpc8260"
This reverts commit
5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Thu, 15 Nov 2007 15:20:43 +0000 (08:20 -0700)]
Revert "Correct fixup relocation for mpc83xx"
This reverts commit
057004f4a4863554d56cc56268bfa7c7d9738e27.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Thu, 15 Nov 2007 15:20:25 +0000 (08:20 -0700)]
Revert "[MPC512x] Correct fixup relocation"
This reverts commit
8d17979d0359492a822a0a409d26e3a3549b4cd4.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Heiko Schocher [Tue, 13 Nov 2007 06:50:29 +0000 (07:50 +0100)]
[UC101] SRAM now with 2 MB working.
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Sat, 3 Nov 2007 22:09:27 +0000 (23:09 +0100)]
Cleanup coding style; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Bruce Adler [Fri, 2 Nov 2007 20:15:42 +0000 (13:15 -0700)]
fix wording in README
Changed the wording to properly describe the shadowing
of the environment from ROM to RAM
Signed-off-by: Bruce Adler <bruce.adler@acm.org>
Shinya Kuribayashi [Tue, 30 Oct 2007 17:18:15 +0000 (02:18 +0900)]
blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Vlad Lungu [Thu, 25 Oct 2007 13:08:14 +0000 (16:08 +0300)]
Trimmed some variables in ne2000.c
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
Zhang Wei [Thu, 25 Oct 2007 09:51:27 +0000 (17:51 +0800)]
Fix the issue of usb_kbd driver missing the scan code of key 'z'.
The scan code of the key 'z' is 0x1d, which should be handled.
The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
controller.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Zhang Wei [Thu, 25 Oct 2007 09:30:04 +0000 (17:30 +0800)]
Fix USB support issue for MPC8641HPCN board.
The configuration file has already enabled USB, but it
missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
on MPC8641HPCN can not work because of the wrong USB
register endian.
And add the USB command to U-Boot commands list.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 24 Oct 2007 16:16:01 +0000 (18:16 +0200)]
Use config_cmd_default.h instead of config_cmd_all.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Marian Balakowicz [Tue, 23 Oct 2007 23:37:36 +0000 (01:37 +0200)]
TQM5200: Call usb_cpu_init() during board init
usb_cpu_init() configures GPS USB pins, clocks, etc. and
is required for proper operation of kernel USB subsystem.
This setup was previously done in the kernel by the fixup
code which is being removed, thus low level init must be
done by U-boot now.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Guennadi Liakhovetski [Tue, 23 Oct 2007 14:25:50 +0000 (16:25 +0200)]
Fix typo in nfs.c
An obvious typo. Originally fixed in linkstation u-boot port.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Guennadi Liakhovetski [Tue, 23 Oct 2007 12:35:05 +0000 (14:35 +0200)]
Fix a typo in cpu/mpc824x/interrupts.c
Since December 2003 the timer_interrupt_cpu() function in
cpu/mpc824x/interrupts.c contains what seems to be a superfluous
parameter. Remove it.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sergej Stepanov [Wed, 17 Oct 2007 09:13:51 +0000 (11:13 +0200)]
add ft_cpu_setup(..) on mpc8260
Add ft_cpu_setup(..)-function to adapt it for use with libfdt
based on code from mpc5xxx
Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
--
Sergej Stepanov [Wed, 17 Oct 2007 09:18:42 +0000 (11:18 +0200)]
changes for IDS8247 board support
To get the IDS8247 board working following are done:
- FCC2 is deactivated
- FCC1 is activated
- I2C is activated
- CFI driver is activated
- Adapted for use with LIBFDT
Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
--
Wolfgang Denk [Fri, 2 Nov 2007 14:09:22 +0000 (15:09 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/work
Wolfgang Denk [Fri, 2 Nov 2007 14:09:10 +0000 (15:09 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Haavard Skinnemoen [Wed, 24 Oct 2007 13:48:37 +0000 (15:48 +0200)]
ATSTK1002: Remove default ethernet addresses
Wolfgang is right: It's not a good idea to set up default initial
ethernet addresses for a board, even though they belong to the local
range.
This will change the failure mode from "IT manager screams at you for
using duplicate ethernet addresses" to a nice error message explaining
that the ethernet address hasn't been set properly.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Justin Flammia [Mon, 29 Oct 2007 21:40:35 +0000 (17:40 -0400)]
DHCP Client Fix
This is a multi-part message in MIME format.
commit
e6e505eae94ed721e123e177489291fc4544b7b8
Author: Justin Flammia <jflammia@savantav.com>
Date: Mon Oct 29 17:19:03 2007 -0400
Found a bug in the way the DHCP Request packet is built, where the IP address
that is offered by the server is bound to prematurely. This patch is a fix of
that bug where the IP address offered by the DHCP server is not used until
after the DHCP ACK from the server is received.
Signed-off-by: Justin Flammia <jflammia@savantav.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
Wolfgang Denk [Thu, 1 Nov 2007 21:58:59 +0000 (22:58 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-coldfire
Wolfgang Denk [Thu, 1 Nov 2007 21:57:33 +0000 (22:57 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-arm
Wolfgang Denk [Thu, 1 Nov 2007 21:56:16 +0000 (22:56 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-tq-group
Wolfgang Denk [Thu, 1 Nov 2007 21:55:23 +0000 (22:55 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Thu, 1 Nov 2007 21:54:31 +0000 (22:54 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mips
Wolfgang Denk [Thu, 1 Nov 2007 21:38:01 +0000 (22:38 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
TsiChungLiew [Thu, 25 Oct 2007 22:16:22 +0000 (17:16 -0500)]
ColdFire 54455: Fix correct boot location for atmel and intel
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Thu, 25 Oct 2007 22:14:00 +0000 (17:14 -0500)]
ColdFire: Fix build error when CONFIG_WATCHDOG is defined
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Thu, 25 Oct 2007 22:12:36 +0000 (17:12 -0500)]
ColdFire 5329: Assign correct SDRAM size and fix cache
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Thu, 25 Oct 2007 22:10:23 +0000 (17:10 -0500)]
ColdFire 5253: Assign correct SDRAM size
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
TsiChungLiew [Thu, 25 Oct 2007 22:09:17 +0000 (17:09 -0500)]
ColdFire 5282: Fix external flash boot and return dramsize
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Bartlomiej Sieka [Thu, 25 Oct 2007 15:20:01 +0000 (17:20 +0200)]
TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Wolfgang Denk [Wed, 24 Oct 2007 09:05:28 +0000 (11:05 +0200)]
Merge branch 'motionpro_ng' of /home/tur/git/u-boot
Martin Krause [Wed, 24 Oct 2007 06:42:25 +0000 (08:42 +0200)]
TQM5200: fix spurious characters on second serial interface
With this patch PSC3 is configured as UART. This is done, because if
the pins of PSC3 are not configured at all (-> all pins are GPI),
due to crosstalk, spurious characters may be send over the RX232_2_TXD
signal line.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Martin Krause [Wed, 24 Oct 2007 06:41:27 +0000 (08:41 +0200)]
TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
Some commands for the STK52xx base board try to access the SM501 grafic
controller. But the TQM5200S has no grafic controller (only the TQM5200
and the TQM5200B have). This patch deactivates the commands accessing
the SM501 for the TQM5200S.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Martin Krause [Mon, 22 Oct 2007 14:45:53 +0000 (16:45 +0200)]
TQM5200: fix spurious characters on second serial interface
With this patch PSC3 is configured as UART. This is done, because if
the pins of PSC3 are not configured at all (-> all pins are GPI),
due to crosstalk, spurious characters may be send over the RX232_2_TXD
signal line.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Martin Krause [Mon, 22 Oct 2007 14:40:06 +0000 (16:40 +0200)]
TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
Some commands for the STK52xx base board try to access the SM501 grafic
controller. But the TQM5200S has no grafic controller (only the TQM5200
and the TQM5200B have). This patch deactivates the commands accessing
the SM501 for the TQM5200S.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 21 Oct 2007 07:14:28 +0000 (09:14 +0200)]
Mips: Fix string functions differ prototype declaration
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Ed Swarthout [Fri, 19 Oct 2007 22:51:40 +0000 (17:51 -0500)]
fsl_pci_init enable COMMAND_MEMORY if inbound window
Patch
16e23c3f removed PCSRBAR allocation. But passing zero windows
to pciauto_setup_device has the side effect of not getting
COMMAND_MEMORY set.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 19 Oct 2007 08:55:24 +0000 (10:55 +0200)]
delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 19 Oct 2007 06:10:15 +0000 (08:10 +0200)]
fix warning: no return statement in function returning non-void
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 19 Oct 2007 04:33:45 +0000 (06:33 +0200)]
xsengine: Fix no partition type specified, use DOS as default
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 18 Oct 2007 22:24:59 +0000 (00:24 +0200)]
lubbock: Fix no partition type specified, use DOS as default
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Tue, 23 Oct 2007 14:50:03 +0000 (16:50 +0200)]
Coding style: keep lists sorted; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 18 Oct 2007 22:09:05 +0000 (00:09 +0200)]
Fix missing drivers makefile entries ds1722.c mw_eeprom.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 18 Oct 2007 22:07:39 +0000 (00:07 +0200)]
Fix warning differ in signedness in board/innokom/innokom.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Marcel Ziswiler [Thu, 18 Oct 2007 22:25:33 +0000 (00:25 +0200)]
fix pxa255_idp board
The pxa255_idp being an old unmaintained board showed several issues:
1. CONFIG_INIT_CRITICAL was still defined.
2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
3. Symbol flash_addr was undeclared.
4. The boards lowlevel_init function was still called memsetup.
5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
6. Using -march=armv5 instead of -march=armv5te resulted in lots of
'target CPU does not support interworking' warnings on recent compilers.
7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
indexes rather than the register definitions from the pxa-regs header
file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
avoid any ambiguities.
8. There were several redefinition warnings concerning ICMR, OSMR3,
OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
9. The board configuration file was rather outdated.
10. The part header file defined the vendor, product and revision arrays
as unsigned chars instead of just chars in the block_dev_desc_t
structure.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Rune Torgersen [Wed, 17 Oct 2007 16:56:31 +0000 (11:56 -0500)]
Make MPC8266ADS command selection more robust
Fix MPC8266 command line definition so it won't break when new commands
are added to u-boot.
Signed-off-by Rune Torgersen <runet@innovsys.com>
Bartlomiej Sieka [Tue, 23 Oct 2007 11:14:10 +0000 (13:14 +0200)]
Motion-PRO: Update configuration to accomodate next generation board.
New board has faster oscillator and a different Flash chip. This affects:
- CFG_MPC5XXX_CLKIN
- SDRAM timings
- Flash CS configuration (timings)
- Flash sector size, and thus MTD partition layout
- malloc() arena size (due to bigger Flash sectors)
- smaller memory test range (due to bigger malloc() arena)
This patch also enables more extensive memory testing via "mtest".
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Tue, 23 Oct 2007 09:36:07 +0000 (11:36 +0200)]
Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
register must be written a value of 0x00000004 as the first step of the
SDRAM contorller configuration.
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Peter Pearse [Tue, 23 Oct 2007 09:22:16 +0000 (10:22 +0100)]
Move PL01* serial drivers to drivers/serial and adjust Makefiles.
Martin Krause [Tue, 23 Oct 2007 06:30:06 +0000 (08:30 +0200)]
Merge branch 'u-boot' of /home/mkr/git/u-boot-tq-group into bugfix
Vlad Lungu [Sun, 21 Oct 2007 13:10:10 +0000 (22:10 +0900)]
[MIPS] Fix UNCACHED_SDRAM
PHYSADDR is for physical address, KSEG1ADDR is for uncached.
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Shinya Kuribayashi [Sun, 21 Oct 2007 12:30:42 +0000 (21:30 +0900)]
[MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Shinya Kuribayashi [Sun, 21 Oct 2007 01:55:37 +0000 (10:55 +0900)]
[MIPS] u-boot.lds: Define _gp in a standard manner
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Shinya Kuribayashi [Sun, 21 Oct 2007 01:55:36 +0000 (10:55 +0900)]
[MIPS] Fix $gp usage
Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
As a general principle, we should use _gp for $gp.
Thanks to linker script's help we fortunately have _gp which equals to
_GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
be able to access to GOT entires, global variables and procedure entry
points. The right thing to do is to use _gp.
This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
which holds the offset from _gp. When updating GOT entries, we use this
offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
I made some change to leave over num_got_entries.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Cc: Vlad Lungu <vlad@comsys.ro>
Shinya Kuribayashi [Sun, 21 Oct 2007 01:55:36 +0000 (10:55 +0900)]
[MIPS] u-boot.lds: Fix __got_start and __got_end
Ensure that __got_start points to top of the `.got', and __got_end points
to bottom as well, so that we never fail to count num_got_entries.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Shinya Kuribayashi [Sun, 21 Oct 2007 01:55:36 +0000 (10:55 +0900)]
[MIPS] u-boot.lds: Remove duplicated .sdata section
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Wolfgang Denk [Sat, 20 Oct 2007 23:01:17 +0000 (01:01 +0200)]
Minor coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Vlad Lungu [Thu, 4 Oct 2007 17:47:10 +0000 (20:47 +0300)]
Fix NE2000 driver:
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
to do anything in eth_stop() if eth_init() was not called.
Simplified RX path in order to avoid timeouts on really really
fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
clever enough to cope with 1 packet per eth_rx().
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
Wolfgang Denk [Sat, 20 Oct 2007 22:29:32 +0000 (00:29 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-tq-group
Wolfgang Denk [Sat, 20 Oct 2007 22:10:34 +0000 (00:10 +0200)]
Merge branch 'master' of /home/git/u-boot/
urwithsughosh@gmail.com [Mon, 24 Sep 2007 17:32:13 +0000 (13:32 -0400)]
Setting MSR[DE] in do_reset
Hello,
This patch ensures the soft reset of the board for the 85xx boards
by setting the MSR[DE] in the do_reset function.
Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
urwithsughosh@gmail.com [Mon, 24 Sep 2007 17:36:01 +0000 (13:36 -0400)]
MSR overwrite fix
Hello,
This patch fixes the MSR overwrite in the start.S when moving out of
the last 4K page.
Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
Dan Wilson [Fri, 19 Oct 2007 16:33:48 +0000 (11:33 -0500)]
tsec driver should clear RHALT on startup
This was causing problems for some people.
Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Kumar Gala [Thu, 11 Oct 2007 05:29:18 +0000 (00:29 -0500)]
Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
On the MPC85xx CDS we have two issues:
1. The device tree fixup code did not check to see if the property we are
trying to update is actually found. Its possible that it would update
random memory starting at 0.
2. Newer Linux kernel's have moved the location of the PCI nodes to be
sibilings of the soc node and not children. The explicit PATH to the PCI
node would not be found for these device trees. Add the ability to handle
both paths. In the future we shouldn't handle such fixups by explicit path.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 11 Oct 2007 05:18:48 +0000 (00:18 -0500)]
Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
console. Make it so we match that config what we tell Linux as the early
STDOUT console.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Tue, 2 Oct 2007 16:12:27 +0000 (11:12 -0500)]
Remove magic numbers from cache related operations for mpc85xx
The mpc85xx start code uses some magic numbers that we actually
have #defines for in <config.h> so use those instead.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Andy Fleming [Fri, 19 Oct 2007 16:24:22 +0000 (11:24 -0500)]
Merge branch 'denx'
Detlev Zundel [Fri, 19 Oct 2007 14:47:26 +0000 (16:47 +0200)]
Fix two typos.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Wolfgang Denk [Thu, 18 Oct 2007 20:02:35 +0000 (22:02 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Tony Li [Thu, 18 Oct 2007 09:47:19 +0000 (17:47 +0800)]
mpc83xx: Add configure entry for MPC83xx ATM support
Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
Makfile and MAKEALL
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Tony Li [Thu, 18 Oct 2007 09:44:38 +0000 (17:44 +0800)]
mpc83xx: pq-mds-pib.c typo error
Correct to val8 from val.
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Thu, 18 Oct 2007 15:02:16 +0000 (10:02 -0500)]
Merge git://www.denx.de/git/u-boot
Stefan Roese [Wed, 17 Oct 2007 13:40:19 +0000 (15:40 +0200)]
ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
Signed-off-by: Stefan Roese <sr@denx.de>
runet@innovsys.com [Tue, 16 Oct 2007 19:50:40 +0000 (14:50 -0500)]
Make MPC8266ADS board compile again.
Signed-off-by: Runet Torgersen <runet@innovsys.com>
Wolfgang Denk [Tue, 16 Oct 2007 14:45:20 +0000 (16:45 +0200)]
Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/master
Jon Loeliger [Mon, 27 Aug 2007 17:41:03 +0000 (12:41 -0500)]
86xx: Allow for fewer DDR slots per memory controller.
As a direct correlation exists between DDR DIMM slots
and SPD EEPROM addresses used to configure them, use
the individually defined SPD_EEPROM_ADDRESS* values to
determine if a DDR DIMM slot should have its SPD
configuration read or not.
Effectively, this now allows for 1 or 2 DIMM slots
per memory controller.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk [Mon, 15 Oct 2007 18:56:12 +0000 (20:56 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Mon, 15 Oct 2007 18:55:51 +0000 (20:55 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-usb
Wolfgang Denk [Mon, 15 Oct 2007 10:59:05 +0000 (12:59 +0200)]
Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/master
Rodolfo Giometti [Mon, 15 Oct 2007 09:59:17 +0000 (11:59 +0200)]
PXA USB OHCI: "usb stop" implementation.
Some USB keys need to be switched off before loading the kernel
otherwise they can remain in an undefined status which prevents them
to be correctly recognized by the kernel.
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Stefan Roese [Mon, 15 Oct 2007 09:39:00 +0000 (11:39 +0200)]
ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
The I2C bootstrap values that can be setup via the "bootstrap" command,
were setup incorrect regarding the generation of the internal sync PCI
clock. The values for PLB clock == 133MHz were slighly incorrect and the
values for PLB clock == 166MHz were totally incorrect. This could
lead to a hangup upon booting while PCI configuration scan.
This patch fixes this issue and configures valid PCI divisor values
for the sync PCI clock, with respect to the provided external async
PCI frequency.
Here the values of the formula in the chapter 14.2 "PCI clocking"
from the 440EPx users manual:
AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
33MHz async PCI frequency:
PLB = 133:
=> 32 <= 44.3 <= 65 (div = 3)
PLB = 166:
=> 32 <= 55.3 <= 65 (div = 3)
66MHz async PCI frequency:
PLB = 133:
=> 65 <= 66.5 <= 132 (div = 2)
PLB = 166:
=> 65 <= 83 <= 132 (div = 2)
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 15 Oct 2007 09:29:33 +0000 (11:29 +0200)]
ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
The BCSR status bit for the 66MHz PCI operation was correctly
addressed (MSB/LSB problem). Now the correct currently setup
PCI frequency is displayed upon bootup.
This patch also fixes this problem on Rainier & Yellowstone, since these
boards use the same souce code as Sequoia & Yosemite do.
Signed-off-by: Stefan Roese <sr@denx.de>
Martin Krause [Wed, 26 Sep 2007 15:55:56 +0000 (17:55 +0200)]
TQM860M: adjust for doubled flash sector size.
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Jens Gehrlein [Wed, 26 Sep 2007 15:55:54 +0000 (17:55 +0200)]
TQM8xx: Fix CAN timing.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Martin Krause [Thu, 27 Sep 2007 12:54:36 +0000 (14:54 +0200)]
TQM866M: fix SDRAM refresh
At 133 MHz the current SDRAM refresh rate is too fast
(measured 4 * 1.17 us).
CFG_MAMR_PTA changes from 39 to 97. This result
in a refresh rate of 4 * 7.8 us at the default clock
50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
This is a compromise until a new method is found to
adjust the refresh rate.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Martin Krause [Wed, 26 Sep 2007 15:55:55 +0000 (17:55 +0200)]
TQM866M: adjust for doubled flash sector size.
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Michal Simek [Sun, 14 Oct 2007 14:12:29 +0000 (16:12 +0200)]
[FIX] XUPV2P change command handling
and remove code violation
Michal Simek [Sun, 14 Oct 2007 12:33:32 +0000 (14:33 +0200)]
Merge git://www.denx.de/git/u-boot
Michal Simek [Sun, 14 Oct 2007 12:31:47 +0000 (14:31 +0200)]
Merge ../master/
Wolfgang Denk [Sat, 13 Oct 2007 22:13:19 +0000 (00:13 +0200)]
Prepare for 1.3.0-rc3 release
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 29 Sep 2007 11:41:37 +0000 (13:41 +0200)]
Fix warning differ in signedness in cpu/pxa/mmc.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Sat, 13 Oct 2007 21:51:14 +0000 (23:51 +0200)]
Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 13 Oct 2007 21:01:27 +0000 (23:01 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-avr32
Wolfgang Denk [Sat, 13 Oct 2007 20:57:43 +0000 (22:57 +0200)]
Merge branch 'merge' of git://denx.de/git/u-boot-microblaze
Wolfgang Denk [Sat, 13 Oct 2007 19:50:12 +0000 (21:50 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-microblaze
Wolfgang Denk [Sat, 13 Oct 2007 19:40:23 +0000 (21:40 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-nand-flash