Koen Vandeputte [Mon, 6 Feb 2017 11:11:39 +0000 (12:11 +0100)]
cns3xxx: use proper macro's for ID handling
Compiled & tested on cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Kristian Evensen [Sat, 4 Feb 2017 20:28:52 +0000 (21:28 +0100)]
ramips: add support for Sanlinking D240
The Sanlinking Technologies D240
(http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same
device as the ZBT WE826, so adding support for it in LEDE is straight forward.
The differences is that the D240 has two mini-PCIe slots (instead of one), blue
LEDs and supports PoE.
Specification:
* CPU: MT7620A
* 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps.
* 16 MB Flash.
* 128 MB RAM.
* 1x USB 2.0 port.
* 2x mini-PCIe slots.
* 2x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.
Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to
test the SD card reader.
The device comes pre-installed with an older version of OpenWRT, including Luci.
In order to install LEDE, you need to follow the existing procedure for updating
OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to keep
existing settings. The default router address is 192.168.10.1 and
username/password admin/root (at least on my devices).
If you brick the device, the procedure for recovery is the same as for the
WE826. Please see the wiki page for that device for instructions.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Piotr Dymacz [Fri, 27 Jan 2017 14:50:35 +0000 (15:50 +0100)]
ar71xx: select ATH79_NVRAM only by boards actually use it
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Mathias Kresin [Thu, 2 Feb 2017 21:35:59 +0000 (22:35 +0100)]
ramips: fix Sercomm NA930 compatible string
The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use
the eval board compatible string.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Thu, 2 Feb 2017 21:34:53 +0000 (22:34 +0100)]
ramips: remove Planex CS-QR10 sound device tree node
The comptible string is neither added by any LEDE patch nor exists in
in the kernel. Drop the sound node which was obviously added
accidentally with
9195d8da ("ramips: DTS rework").
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Thu, 2 Feb 2017 21:11:23 +0000 (22:11 +0100)]
ramips: cleanup SPI flash device tree properties usage
Use only the jedec,spi-nor compatible string. Everything else either
never worked or is only support to keep compatibility.
Remove the linux,modalias property. It is obsolete since kernel 4.4.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Felix Fietkau [Wed, 1 Feb 2017 12:53:57 +0000 (13:53 +0100)]
ramips: remove DT pcie nodes for GL-MT300A/N
These devices don't have a secondary wifi chip
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Florian Fainelli [Sun, 1 Jan 2017 00:13:34 +0000 (16:13 -0800)]
rpcd: Explicitly link with lcrypt
Fixes build issues with some toolchains that don't add lcrypt in the default
search paths:
CMakeFiles/rpcd.dir/session.c.o: In function `rpc_login_test_password':
build_dir/target-mipsel-linux-gnu/rpcd-2016-12-03-
0577cfc1/session.c:823: undefined reference to `crypt'
collect2: error: ld returned 1 exit status
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Vitaly Chekryzhev [Fri, 20 Jan 2017 13:03:15 +0000 (18:03 +0500)]
ramips: ZyXEL Keenetic Omni/Omni2: export gpio usb power
Export gpio usb to allow power management of USB port.
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
Vitaly Chekryzhev [Fri, 20 Jan 2017 12:57:11 +0000 (17:57 +0500)]
ramips: ZyXEL Keenetic Viva: align factory images
ZyXEL web-flasher requires squashfs to be aligned to 64kb.
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
Vitaly Chekryzhev [Tue, 3 Jan 2017 18:18:55 +0000 (23:18 +0500)]
ramips: ZyXEL Keenetic Viva: export gpio usb power
Export gpio usb to allow power management of USB port.
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
Yo Abe [Thu, 26 Jan 2017 13:28:09 +0000 (22:28 +0900)]
ramips: add ip17xx support to WLI-TX4-AG300N
ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which
should be included by default.
Signed-off-by: Yo Abe <abe.geel@gmail.com>
[Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Joseph C. Lehner [Wed, 25 Jan 2017 16:57:56 +0000 (17:57 +0100)]
ramips: fix EX2700 wireless mac
On some EX2700 devices, the MAC address from the eeprom data differs
from the actual MAC address. Fix that, and cleanup the DTS file
while we're at it.
Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
Vitaly Chekryzhev [Thu, 5 Jan 2017 11:25:59 +0000 (16:25 +0500)]
ramips: ZyXEL Keenetic series update wan mac
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
Vitaly Chekryzhev [Thu, 5 Jan 2017 11:23:07 +0000 (16:23 +0500)]
ramips: ZyXEL Keenetic Omni align factory images
ZyXEL web-flasher requires squashfs to be aligned to 64kb.
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
Vitaly Chekryzhev [Sun, 1 Jan 2017 21:46:33 +0000 (02:46 +0500)]
ramips: correct keenetic-series switch index
Fix switch name typo
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
Thibaut VARENE [Wed, 18 Jan 2017 10:34:56 +0000 (11:34 +0100)]
ramips: add support for Netgear WN3000RPv3
This patch adds support for the Netgear WN3000RPv3
http://www.netgear.com/support/product/wn3000rpv3.aspx
Specifications:
- SoC: MediaTek MT7620A (580MHz, ramips)
- RAM: 32MB DDR
- Storage: 8MB NOR SPI flash
- Wireless: builtin MT7620A, 2x2:2 with u.FL connectors
- Ethernet: 1x100M
- Serial: JP1 header, 57600-8N1
- Stock firmware based on OpenWRT Kamikaze
Like the EX2700, the bootloader expects a secondary image signature,
see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577
This is why the same fakeroot image is used for the WN3000
Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
BangLang Huang [Wed, 18 Jan 2017 09:45:48 +0000 (17:45 +0800)]
ramips: fix mac address of miwifi-mini
For the miwifi-mini, the offset of ethernet mac should be 0x28
which you can easyily dump from 'Factory' partition.
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
Jo-Philipp Wich [Tue, 14 Feb 2017 17:35:57 +0000 (18:35 +0100)]
feeds: add option to force feed update despite modified files
Implement a new flag "-f" for the feeds update command which causes the
script to fall back to a more agressive git update strategy in case there
are locally modified files in the feeds directory.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Furong Xu [Tue, 14 Feb 2017 09:25:08 +0000 (17:25 +0800)]
ramips: Clean duplicated status property for Omega2 WMAC in dtsi
At the tail of dtsi, wmac is enabled twice, clean the first one
Signed-off-by: Furong Xu <xfr@outlook.com>
Giuseppe Lippolis [Mon, 13 Feb 2017 10:36:41 +0000 (11:36 +0100)]
ramips: fixed sms led polarity into dwr-512 DT
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Thibaut VARENE [Sun, 12 Feb 2017 16:11:08 +0000 (17:11 +0100)]
ramips: WN3000RPv3: do not setup switch
The WN3000RPv3 is a repeater with a single ethernet port. Setting up the
switch, even to disable it, is unnecessary and possibly confusing.
Configure LAN as eth0 instead.
Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Jo-Philipp Wich [Thu, 27 Apr 2017 13:38:48 +0000 (15:38 +0200)]
busybox: revert accidential version bump
Due to an oversight during patch conflict resolution, the PKG_VERSION got
accidentially bumped instead of the PKG_RELEASE field.
Revert the bad version change as there exists no upstream 1.25.2 version.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 25 Apr 2017 12:21:08 +0000 (14:21 +0200)]
busybox: nslookup_lede: mimic output format of old Busybox applet
When invoking "nslookup_lede" with a domain argument and without explicit
query type, issue both A and AAAA queries and display the resulting IP
addresses in a numbered list style, similar to how the old BusyBox nslookup
used to output the records.
This is required for compatibility with certain scripts.
Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 25 Apr 2017 12:03:11 +0000 (14:03 +0200)]
busybox: nslookup_lede: fix compatibility with v1.25
The ":*" optstring syntax was only recently introduced with BusyBox v1.26,
older versions need a corresponding hint in the "opt_complementary" variable
to denote flag values that should be stored as llist entries.
Add the required opt_complementary entry to fix random SIGBUS, SIGILL or
SIGSEGV related crashes on BusyBox 1.25.x when attempting to use the "-q"
flag of the "nslookup_lede" applet.
Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 27 Apr 2017 13:26:48 +0000 (15:26 +0200)]
x86: enable 4G high memory support for generic (32bit) subtarget
This is required to fully support a number of 32bit x86 systems equipped
with more than one GB ram, e.g. certain Atom CPU machines.
Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Yousong Zhou [Wed, 11 Jan 2017 11:57:24 +0000 (19:57 +0800)]
generic: keep module aliases inside .modinfo
It seems module aliases are actually essential info. E.g. other modules
may call xt_request_find_match(NFPROTO_IPV{4,6}, "hashlimit", 1) and the
kernel will request user mode modprobe helper for ipt_hashlimit and
ip6t_hashlimit respectively which are aliases of xt_hashlimit.ko
Compile-tested for armvirt, there is nearly no size impact.
Before
-rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed
-rw-r--r-- 1 yousong yousong 1634 Jan 11 11:07 lede-armvirt-default.manifest
-rw-r--r-- 1 yousong yousong
1533647 Jan 11 11:07 lede-armvirt-default-rootfs.tar.gz
-rw-r--r-- 1 yousong yousong
1802711 Jan 11 11:07 lede-armvirt-root.ext4.gz
-rw-r--r-- 1 yousong yousong
1544597 Jan 11 11:07 lede-armvirt-rootfs.cpio.gz
-rw-r--r-- 1 yousong yousong
1174984 Jan 11 11:07 lede-armvirt-root.squashfs.gz
-rwxr-xr-x 1 yousong yousong
1654712 Jan 11 11:07 lede-armvirt-zImage
-rwxr-xr-x 1 yousong yousong
2738296 Jan 11 11:07 lede-armvirt-zImage-initramfs
drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages
-rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums
After
-rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed
-rw-r--r-- 1 yousong yousong 1634 Jan 11 11:10 lede-armvirt-default.manifest
-rw-r--r-- 1 yousong yousong
1533646 Jan 11 11:10 lede-armvirt-default-rootfs.tar.gz
-rw-r--r-- 1 yousong yousong
1802711 Jan 11 11:10 lede-armvirt-root.ext4.gz
-rw-r--r-- 1 yousong yousong
1544593 Jan 11 11:10 lede-armvirt-rootfs.cpio.gz
-rw-r--r-- 1 yousong yousong
1174984 Jan 11 11:10 lede-armvirt-root.squashfs.gz
-rwxr-xr-x 1 yousong yousong
1654736 Jan 11 11:10 lede-armvirt-zImage
-rwxr-xr-x 1 yousong yousong
2738144 Jan 11 11:10 lede-armvirt-zImage-initramfs
drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages
-rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Tue, 25 Apr 2017 12:26:38 +0000 (20:26 +0800)]
ubox: bump to version 2017-03-10
Fixes FS#684 with commit
21a4bd0
Changes since current version. All changes except the ones prefixed
with asterisks are for bugfixes. Module aliases awareness is expected
by the kernel to be a basic facility and is required for properly
initializing wireguard.
16f7e16 syslog: remove unnecessary sizeof struct between messages
21a4bd0 kmodloader: modprobe: return 0 for loaded modules
3dc78a4 kmodloader: don't store aliases info in struct module
c553354 cmake: fix typo
8973576 kmodloader: fix not being able to find some modules
fce9382 cmake: Check for getrandom system call
ac2d43e kmodloader: support '-q' quiet option
*
f8d3d16 ubox: Add an option for more accurate timestamps in log
14839f0 kmodloader: make insert_module() idempotent
*
6e3c6dc kmodloader: add module alias awareness
9371411 kmodloader: fix out-of-bound access when parsing .modinfo
a62c946 kmodloader: modprobe: skip possible command line arguments
*
46a4b5f kmodloader: log to kmsg when loading directories of modules
eacc426 kmodloader: remove redundant glob wildcard char
8488bb5 ubox: Initialize conditionally uninitialized variabled
db070f1 ubox: Fix some memory leaks
acc48b5 kmodloader: Fix typo in error message
Size comparison on x86_64 host
function old new delta
main 2190 2344 +154
scan_module_folder 665 793 +128
alloc_module_node - 113 +113
.rodata 946 1036 +90
alloc_module 202 245 +43
free_modules 77 119 +42
load_modprobe 209 237 +28
scan_loaded_modules 241 265 +24
avl_modcmp 45 67 +22
insert_module 204 224 +20
find_module 13 30 +17
static.optind@@GLIBC_2 - 4 +4
static.load_moddeps 118 117 -1
scan_module_folders 55 54 -1
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 10/2 up/down: 685/-2) Total: 683 bytes
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Álvaro Fernández Rojas [Sun, 23 Apr 2017 11:55:03 +0000 (13:55 +0200)]
kernel: use skb_cow_head() to deal with cloned skbs
We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.
skb_cow_head() is the proper helper to deal with this.
Fixes Ethernet<->WiFi bridge for Raspberry Pi and probably other devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Matthias Schiffer [Sat, 22 Apr 2017 16:56:25 +0000 (18:56 +0200)]
ar71xx: fix minor syntax error in /lib/upgrade/platform.sh
Fix a '==' that should be a '=' in a test condition. Busybox fortunately
doesn't care.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Matthias Schiffer [Sat, 22 Apr 2017 16:54:07 +0000 (18:54 +0200)]
ramips: update DEVICE_PACKAGES for Ubiquiti EdgeRouter X
Fixes removal of unneeded kernel modules with per-device rootfs.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Florian Fainelli [Wed, 1 Mar 2017 18:48:32 +0000 (10:48 -0800)]
openssl: Use mkhash for STAMP_CONFIGURED
The current way of creating a STAMP_CONFIGURED filename for OpenSSL can
lead to an extremely long filename that makes touch unable to create it,
and fail the build.
Use mkhash to produce a hash against OPENSSL_OPTIONS which creates a
shortert stamp file,
Fixes #572
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jo-Philipp Wich [Fri, 21 Apr 2017 11:18:16 +0000 (13:18 +0200)]
busybox: fix build of nslookup_lede applet without IPv6 (#728)
Protect any IPv6 related with appropriate guards to fix compilation with
disabled IPv6 support in Busybox.
Fixes #728.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Florian Fainelli [Wed, 12 Apr 2017 16:02:30 +0000 (09:02 -0700)]
busybox: Move libresolv detection to LEDE Makefile
Since the LEDE nslookup applet is already specific to LEDE, move the
libresolv detection into the busybox Makefile that LEDE uses.
This fixes builds with external toolchains that don't automatically
search for headers and/or libraries without being told so.
Fixes:
de5b8e5d2fe1 ("busybox: add musl compatible nslookup replacement")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rafał Miłecki [Sat, 18 Mar 2017 17:31:36 +0000 (18:31 +0100)]
bcm53xx: backport BCM5301X patches
This fixes GIC interrupts (required before switching to 4.9), adds few
new entires & introduces DTS for Archer C5.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sun, 12 Mar 2017 15:24:13 +0000 (16:24 +0100)]
bcm53xx: parepare for building more Linksys images
We still can't enable them by default without proper TRX support.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sat, 11 Mar 2017 11:33:53 +0000 (12:33 +0100)]
bcm53xx: prepare for building Archer C5 V2 image
Don't enable it yet as kernel needs to be updated first.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Vittorio Gambaletta [Sun, 26 Mar 2017 07:55:44 +0000 (09:55 +0200)]
ar71xx: add TP-LINK TL-WR841N/ND v12 image
This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC
ID, same TFTP image name...).
If the stock firmware web interface doesn't accept LEDE factory image,
it can be flashed via the U-Boot TFTP recovery mode, by long-pressing
the reset button after power on.
The TFTP image name is wr841nv11_tp_recovery.bin (yes, v11, not v12).
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Daniel Engberg [Wed, 15 Mar 2017 16:14:55 +0000 (17:14 +0100)]
utils/f2fs-tools: Update to 1.8.0
Update f2fs-tools to 1.8.0
Refresh patches
Remove selinux patch, use configure argument instead.
Switch to xz tarball
Adjust url to avoid redirects
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Jo-Philipp Wich [Tue, 14 Mar 2017 21:38:59 +0000 (22:38 +0100)]
busybox: add musl compatible nslookup replacement
Add an alternative nslookup applet implementation which is compatible with
musl libc wrt. name server selection and which supports a number of additional
features such as query type selection.
Fixes #155, #217
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sat, 15 Apr 2017 15:00:49 +0000 (17:00 +0200)]
kernel: update kernel 4.4 to 4.4.61
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Sat, 1 Apr 2017 11:56:44 +0000 (13:56 +0200)]
odhcpd: update to version 2017-03-29 (FS#635)
3d9f406 rework IPv6 dns address selection (FS#635)
bc6c3ac ndp: keep an exact copy of IPv6 interface addresses
6eb1e01 ndp: code cleanup
eea7d03 rework IPv6 address dump logic
24d21c7 ndp: add syslog debug tracing
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Florian Fainelli [Sat, 4 Mar 2017 21:22:50 +0000 (13:22 -0800)]
odhcpd: update to version 2017-02-28
Brings in the following change:
9eac2a896341 dhcpv6-ia: Check lockf return value
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Hans Dedecker [Thu, 23 Feb 2017 20:56:15 +0000 (21:56 +0100)]
odhcpd: update to version 2017-02-21
1b630f8 router: don't announce prefixes with valid lifetime equal to 0
ba0cac0 router: fix arithmetic exception fault
3495f17 router: allow RA prefix lifetime being set to leasetime value (FS#397)
e437ce9 treewide: simplify dhcp leasetime checking
942fb33 router: support ra_mininterval and ra_lifetime uci parameters (FS#397)
f913337 router.h: fix alignment style
4dc7edb Revert "odhcpd.h: fix alignment style"
62ea54f odhcpd.h: fix alignment style
a898ee5 config: make loglevel configurable via uci (FS#481)
51c756c odhcpd: display correct default log level in usage text
68ee0b5 treewide: define and use macro IN6_IS_ADDR_ULA
fa57225 ndp: deregister netlink event socket for non recoverable errors
ac70d28 odhcpd: fix white space errors
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Mathias Kresin [Sun, 9 Apr 2017 07:14:52 +0000 (09:14 +0200)]
ramips: add RP-N53 pcie wireless eeprom
Fix the PCIe 5GHz wireless by using the on flash eeprom/caldata.
Disable the 2.4GHz band as this band has no antennas attached but is
enabled in the eeprom/caldata.
Fixes: FS#691
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 9 Apr 2017 07:12:55 +0000 (09:12 +0200)]
ramips: fix WHR-600D eeprom dt property
Fix the PCIe 5GHz wireless by using the ralink mtd-eeprom property as
this board have a RT5592 and uses the rt2x00 driver. The mediathek
device tree bindings do not work here.
Fixes: FS#691
Fixes:
d8dd207ea6f2 ("ramips: use the ralink,mtd-eeprom device tree property")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Felix Fietkau [Wed, 22 Mar 2017 12:22:57 +0000 (13:22 +0100)]
util-linux: re-enable parallel builds
The original build error in 'more' seems to be gone
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 22 Mar 2017 12:49:05 +0000 (13:49 +0100)]
util-linux: unconditionally enable ncursesw support
The build dependency is unconditional, and some components might fail if
ncurses is not available
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Engberg [Mon, 20 Mar 2017 08:51:26 +0000 (09:51 +0100)]
utils/util-linux: Update to 2.29.2
Update util-linux to 2.29.2
Remote 0001-fix-uClibc-ng-scanf-check.patch as it's been merged upstream.
Refresh patches
Change ncurses to ncursesw to fix compilation and avoid confusion
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove faulty dependency changes]
Jo-Philipp Wich [Thu, 19 Jan 2017 01:41:02 +0000 (02:41 +0100)]
build: fix triggering opkg/host compilation
Commit
131db36 "build: remove separate /install step for host builds" dropped
the package/*/host/install targets in favor to performing the install steps
within the compile target instead.
Adjust package/Makefile accordingly in order to prevent a missing
staging_dir/host/bin/opkg when staging package archives into the rootfs.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Mon, 20 Feb 2017 11:32:45 +0000 (12:32 +0100)]
libubox: fix host build on macOS
Use the defaults instead of a custom non-portable Host/Install section
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Fri, 17 Feb 2017 09:49:14 +0000 (10:49 +0100)]
libubox: add host build
Our opkg fork requires libubox to build, so add a host build for it.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 16 Feb 2017 16:36:47 +0000 (17:36 +0100)]
opkg: switch to LEDE fork (#120, #551, #571)
Cherry-pick the following commits from master to bump opkg in LEDE 17.01:
b65dc04712 opkg: switch to own fork to improve memory usage
55ffc38004 opkg: re-enable usign support
19720a6f03 opkg: fix handling conffiles in status lists
9e4555f58d opkg: fix stray printf() (#551)
ebf846b005 opkg: mark as essential (FS#571)
aedd5d5cb0 opkg: fix several package installation bugs
48ae44d033 opkg: gracefully handle missing $PATH, fix build warnings
1449b52f02 opkg: backport upstream fixes, code cleanups
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Wed, 5 Apr 2017 21:38:42 +0000 (23:38 +0200)]
mt76: ensure that the metapackage gets built as .ipk
Fixes errors during the image builder run
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 13 Mar 2017 09:49:58 +0000 (10:49 +0100)]
image.mk: force kernel rebuild on every run
DTS dependencies are not processed correctly so makes it safer against
poentially stale builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jing Qiu [Tue, 14 Mar 2017 07:32:08 +0000 (15:32 +0800)]
kernel: Fix the incorrect i_nlink count after jffs2's RENAME_EXCHANGE operations.
The problem is caused by the incorrect handling of the parent inode's
i_nlink count for the dentry to be RENAME_EXCHANGED. There are 3 cases
to consider. Assume we want to RENAME_EXCHANGE struct dentry *a and
struct dentry *b, and inode_a is pointed to by dentry_a, inode_b is
pointed to by dentry_b:
1. If inode_a is a directory, but inode_b isn't, then we must decrease
the i_nlink count of old_dir_i, and increase the i_nlink of new_dir_i.
2. If inode_a isn't a directory, but inode_b is a directory, then we
must increase the i_nlink of old_dir_i, and decrease the i_nlink count
of new_dir_i.
3. If the types of inode_a and inode_b are the same, we don't change the
i_nlink for either old_dir_i or new_dir_i.
Signed-off-by: Jing Qiu <aqiu0720@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 3 Apr 2017 13:08:28 +0000 (15:08 +0200)]
mac80211: backport an upstream fix for queue start/stop handling
Fixes issues with 802.11s
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Piotr Dymacz [Mon, 6 Mar 2017 22:20:37 +0000 (23:20 +0100)]
sysntpd: restore support for peer-less (standalone) mode
ntpd from Busybox supports peer-less (standalone) mode when it's started
with option -l and without any peer provided with option -p. In this
mode ntpd uses local time as reference and acts as stratum 1 server.
This mode can be used in isolated networks, where Internet access and/or
other NTP server/s are not available, but the device has some other way
of getting correct time, like e.g. GPS (ugps supports setting local time
by default).
Support for this mode was incorrectly disabled/removed in:
1527f96ca6e196fa17c96fdb3ae520158fa5943f
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Piotr Dymacz [Sun, 12 Mar 2017 22:50:36 +0000 (23:50 +0100)]
ar71xx: fix Wallys DR344 ethernet MAC addresses offsets
Without this fix, ethernet interfaces on Wallys DR344 use random MAC
addresses.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Sun, 5 Mar 2017 18:30:44 +0000 (19:30 +0100)]
ugps: fix and improve init script
The ugps tool expects device path in last argument. If it's provided
before other options, they won't be processed at all.
Additionally, make it possible to use absolute path for gps character
device in related uci configuration.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Hauke Mehrtens [Sun, 2 Apr 2017 09:53:42 +0000 (11:53 +0200)]
kernel: update kernel 4.4 to 4.4.59
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 30 Mar 2017 12:25:39 +0000 (14:25 +0200)]
ubox: fix sha256 mirror hash
Commit
5c20a4fec923c3 ("ubox: turn logd into a separate package") changed
the PKG_SOURCE_DATE which is also included in the tar file. This change
resulted in a new tar with a different hash, but the sha256 hash was not
updated. Fix the sha256 hash value in this commit to match what would be
created from git and what is already on the mirror.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Hauke Mehrtens [Thu, 30 Mar 2017 10:25:13 +0000 (12:25 +0200)]
odhcpd: fix sha256 sum
The sha256sum added in commit
b8567cb44e9e4f ("odhcpd: update to git HEAD
version (FS#396)") does not match the sha256sum of the file on the mirror or
when I clone it. Update the sha256 sum to the correct value.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Yousong Zhou [Tue, 28 Mar 2017 09:41:14 +0000 (17:41 +0800)]
firewall: document rules for IPSec ESP/ISAKMP with 'name' option
These are recommended practices by REC-22 and REC-24 of RFC6092:
"Recommended Simple Security Capabilities in Customer Premises Equipment
(CPE) for Providing Residential IPv6 Internet Service"
Fixes FS#640
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Matthias Schiffer [Sat, 25 Mar 2017 12:43:29 +0000 (13:43 +0100)]
iw: enable MESH ID in scan output
Make scan output useful for 802.11s meshes. The common print_ssid function
is used, so this doesn't add any additional code.
Based-on-patch-by: Jan-Tarek Butt <tarek@ring0.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Yousong Zhou [Sat, 25 Mar 2017 05:23:06 +0000 (13:23 +0800)]
busybox: vi: backporting patches to fix ZZ and :x command
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Rafał Miłecki [Tue, 21 Mar 2017 21:57:56 +0000 (22:57 +0100)]
umdns: update to the version 2017-03-21
This includes following changes:
480d7bc Fix sending unicast questions on cache expire
a0403cd Keep source sockaddr for every cached DNS record
1478293 Fix code freeing cached non-A(AAA) records too early
9f1cc22 Fix replying to "QU" questions received on unicast interface
943bedb Fix reading port of incoming packets
c725494 Use MCAST_PORT define for port 5353
ce7e9e9 Use one define for DNS-Based Service Discovery service name
e1bacef Drop entries cached for interface we're going to delete
496aeba Fix comment typo in cache_gc_timer
f89986b Fix refreshing cached A(AAA) records that expire
Previous updates made umdns work as expected on startup but there were
still many bugs. They were mostly related to runtime - cache management
and requests + responses. E.g. umdns was never able to send question on
DNS record expire. It was also ignoring all incoming unicast questions.
Since these issues are quite serious it makes sense to backport this
update to the stable branch.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 14 Mar 2017 10:59:53 +0000 (11:59 +0100)]
umdns: update to the version 2017-03-14
This includes 3 cleanups:
fd5a160 Don't cache hosts as services
80dd246 Refresh DNS records A and AAAA directly
6515101 Access cached records (instead of services) to read list of hosts
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Yousong Zhou [Fri, 17 Mar 2017 09:49:29 +0000 (17:49 +0800)]
iproute2: fix ip monitor can't work when NET_NS is not enabled
The bug appeared in v4.1.0 and was fixed since v4.8.0
Fixes FS#620
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Hauke Mehrtens [Mon, 13 Mar 2017 21:51:20 +0000 (22:51 +0100)]
curl: fix CVE-2017-2629 SSL_VERIFYSTATUS ignored
This fixes the following security problem:
https://curl.haxx.se/docs/adv_20170222.html
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 13 Mar 2017 19:04:32 +0000 (20:04 +0100)]
mbedtls: update to version 2.4.2
This fixes the following security problems:
* CVE-2017-2784: Freeing of memory allocated on stack when validating a public key with a secp224k1 curve
* SLOTH vulnerability
* Denial of Service through Certificate Revocation List
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Álvaro Fernández Rojas [Sat, 11 Mar 2017 18:31:16 +0000 (19:31 +0100)]
mac80211: mwifiex-sdio: select DRIVER_11AC_SUPPORT
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sat, 11 Mar 2017 18:30:05 +0000 (19:30 +0100)]
mac80211: mwifiex-pcie: select DRIVER_11AC_SUPPORT
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Henryk Heisig [Tue, 28 Feb 2017 05:30:25 +0000 (06:30 +0100)]
mvebu: wrt3200acm enable SDIO interface
add mwifiex-sdio package to wrt3200acm
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Henryk Heisig [Tue, 28 Feb 2017 05:32:26 +0000 (06:32 +0100)]
mac80211: add support for Marvell 802.11n/802.11ac SDIO Wireless cards
This adds option to build kernel module and firmware packages
for a Marvell 8887 SDIO Wireless device
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Tue, 7 Feb 2017 21:26:11 +0000 (22:26 +0100)]
brcm2708: remove duplicated gzip from image generation
Images are now automatically gziped so remove custom image command
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Stijn Segers [Fri, 10 Mar 2017 17:58:26 +0000 (18:58 +0100)]
ar71xx: add ath10k driver and firmware for Netgear R6100 to firmware image
A Netgear R6100 owner reported the LEDE images lack the ath10k driver and firmware [1]. This patch adds both to the R6100 image.
[1] https://forum.lede-project.org/t/netgear-r6100-5ghz-wifi-not-working-after-initial-install/2222
Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
Rafał Miłecki [Fri, 10 Mar 2017 10:58:48 +0000 (11:58 +0100)]
umdns: update to the 2017-03-10 version
This fixes crash in interface_start caused by freeing interface in
interface_free without stopping a timeout.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Stijn Tintel [Sun, 5 Mar 2017 20:16:07 +0000 (21:16 +0100)]
brcm2708: add support for the new Raspberry Pi Zero W
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Stijn Tintel [Sun, 5 Mar 2017 20:16:06 +0000 (21:16 +0100)]
brcm2708: order boards and models alphabetically
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Álvaro Fernández Rojas [Wed, 8 Mar 2017 08:46:30 +0000 (09:46 +0100)]
brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
- led1 can't be controlled on rpi-3 for linux 4.4, remove it.
- Fix modules.mk typos.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Wed, 8 Mar 2017 08:28:19 +0000 (09:28 +0100)]
brcm2708-gpu-fw: update to latest version
This is needed in order to add support for the new RPi Zero W
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Jo-Philipp Wich [Tue, 7 Mar 2017 16:38:30 +0000 (17:38 +0100)]
ramips: fix Linksys RE6500 switch port mapping
Properly map the internal switch ports to the proper LAN1..LAN4 labels.
Fixes #530.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Mon, 6 Mar 2017 12:47:50 +0000 (13:47 +0100)]
ppp: propagate master peerdns setting to dynamic slave interface
Honour the parent interfaces peerdns option when spawning a virtual DHCPv6
interface in order to avoid pulling in IPv6 DNS servers when the user opted
to inhibit peer DNS servers in the configuration.
Fixes #597.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Kevin Darbyshire-Bryant [Sun, 26 Feb 2017 18:09:10 +0000 (18:09 +0000)]
kernel: update kernel 4.4 to 4.4.52
Bump kernel from 4.4.50 to 4.4.52
Refresh patches
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Rafał Miłecki [Tue, 28 Feb 2017 21:34:13 +0000 (22:34 +0100)]
bcm53xx: backport accepted BCM5301X and BCM53573 patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 7 Feb 2017 17:11:17 +0000 (18:11 +0100)]
bcm53xx: include Broadcom PHY driver in the kernel
Initial idea was to use package with this PHY driver for devices that
need it. Unfortunately this can't work as bgmac is built-in and PHY
probing happens before loading modules - it results in PHY subsystem
picking default (generic) PHY driver.
There were two ways of solving this:
1) Making bcm53xx use bgmac as module
xor
2) Built-in Broadcom PHY driver
After some quick discussion it seems we can simply built-in the driver
as increased kenel size is relatively small (1805 B).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Alberto Bursi [Thu, 23 Feb 2017 18:42:40 +0000 (19:42 +0100)]
kirkwood: fix include in etc/board.d/02_network
the mtd_get_mac_ascii function called within this script requires the inclusion of /lib/functions/system.sh
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Hsing-Wang Liao [Sun, 26 Feb 2017 10:07:52 +0000 (18:07 +0800)]
wireless-tools: Change download url to github
Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
Alif M. Ahmad [Sat, 18 Feb 2017 16:03:33 +0000 (23:03 +0700)]
grub2: update to 2.02~rc1
Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
Kevin Darbyshire-Bryant [Tue, 18 Oct 2016 08:56:19 +0000 (09:56 +0100)]
iftop: bump to latest upstream
Drops a LEDE carried patch now upstream.
Convert to autotools.
A number of nits fixed upstream (dns & short packet handling most
notable)
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Ben Kelly [Mon, 20 Feb 2017 12:04:30 +0000 (14:04 +0200)]
swconfig: Bugfix switch_port uci option parsing
When not defining 'device' or 'vlan' in relevant switch_port uci
sections, behaviour is inconsistent due to *devn, *port and *vlan
pointers not being zero initialized.
Signed-off-by: Ben Kelly <ben@benjii.net>
Felix Fietkau [Mon, 20 Feb 2017 09:49:33 +0000 (10:49 +0100)]
netifd: fix stopping netifd + interfaces
stop() is overwritten by rc.common, so implement stop_service instead.
While at it, remove the now unnecessary restart() override
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Martin Schiller [Mon, 20 Feb 2017 05:27:41 +0000 (06:27 +0100)]
libpcap: add optional netfilter support
This is needed to use the nflog interface with tcpdump
Signed-off-by: Martin Schiller <mschiller@tdt.de>
Felix Fietkau [Thu, 16 Feb 2017 06:51:42 +0000 (07:51 +0100)]
archs38: only calculate entry point address when necessary
$(eval) runs even during prereq check, which can cause bogus error
messages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 16 Feb 2017 06:50:55 +0000 (07:50 +0100)]
arc770: only calculate entry point address when necessary
$(eval) runs even during prereq check, which can cause bogus error
messages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 21 Feb 2017 13:24:32 +0000 (14:24 +0100)]
px5g: replace px5g-standalone with a statically linked variant of px5g-mbedtls
px5g-standalone only supports SHA1 for certificates, which is strongly
deprecated. The new px5g-standalone is about 27k bigger (compressed),
and has identical behavior to px5g-mbedtls (it uses SHA256).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 21 Feb 2017 13:33:14 +0000 (14:33 +0100)]
mbedtls: add --function-sections and --data-sections to CFLAGS
This allows binaries that links these libraries statically to be reduced
by using --gc-sections on link
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Michal Sojka [Thu, 16 Feb 2017 22:02:50 +0000 (23:02 +0100)]
scripts/feeds: Reuse TOPDIR if defined in environment
The feeds script sets value of TOPDIR in a way that is inconsistent
with how toplevel Makefile sets it. The inconsistency manifests when I
use a "build directory" with symlinks to LEDE source (see below).
When make is invoked in such a directory, make's TOPDIR variable is
set to that directory, whereas scripts/feeds sets TOPDIR to the top of
LEDE source, which results in creating feeds directory inside the LEDE
source instead of in the build directory.
This patch changes the script so that it reuses the TOPDIR value form
the environment if it exists. The result is that 'make
package/symlinks' correctly fetches feeds to the build directory
instead in the source.
I use the following commands to create the build directory:
ln -s $SRC/config config
ln -s $SRC/Config.in Config.in
ln -s $SRC/feeds.conf.default feeds.conf.default
ln -s $SRC/include include
ln -s $SRC/Makefile Makefile
mkdir package
ln -s $SRC/package/base-files package/base-files
ln -s $SRC/package/boot package/boot
ln -s $SRC/package/devel package/devel
ln -s $SRC/package/firmware package/firmware
ln -s $SRC/package/kernel package/kernel
ln -s $SRC/package/libs package/libs
ln -s $SRC/package/Makefile package/Makefile
ln -s $SRC/package/network package/network
ln -s $SRC/package/system package/system
ln -s $SRC/package/utils package/utils
ln -s $SRC/rules.mk rules.mk
ln -s $SRC/scripts scripts
ln -s $SRC/target target
ln -s $SRC/toolchain toolchain
ln -s $SRC/tools tools
This allows me to easily test changes in LEDE on multiple targets.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Hsing-Wang Liao [Sat, 18 Feb 2017 06:40:58 +0000 (14:40 +0800)]
kernel: add Chinese codepages
Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
projects / oweals / openwrt.git / log