Fix setting of ssl_strings_inited.

Thanks to GitHub user zsergey105 for reporting this.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6875)

Check early that the config target exists and isn't a template

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6885)

CHANGES: mention s390x assembly pack extensions

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6870)

crypto/mem.c: switch to tsan_assist.h in CRYPTO_MDEBUG.

Rationale is that it wasn't providing accurate statistics anyway.
For statistics to be accurate CRYPTO_get_alloc_counts should acquire
a lock and lock-free additions should not be an option.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

engine/eng_lib.c: remove redundant #ifdef.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

man3/OPENSSL_LH_COMPFUNC.pod: clarifications and updates.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

x509v3/v3_purp.c: re-implement lock-free check for extensions cache validity.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

x509v3/v3_purp.c: resolve Thread Sanitizer nit.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

ssl/*: switch to switch to Thread-Sanitizer-friendly primitives.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

lhash/lhash.c: switch to Thread-Sanitizer-friendly primitives.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

Add internal/tsan_assist.h.

Goal here is to facilitate writing "thread-opportunistic" code that
withstands Thread Sanitizer's scrutiny. "Thread-opportunistic" is when
exact result is not required, e.g. some statistics, or execution flow
doesn't have to be unambiguous.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)

stack/stack.c: omit redundant NULL checks.

Checks are left in OPENSSL_sk_shift, OPENSSL_sk_pop and OPENSSL_sk_num.
This is because these are used as "opportunistic" readers, pulling
whatever datai, if any, set by somebody else. All calls that add data
don't check for stack being NULL, because caller should have checked
if stack was actually created.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)

Harmonize use of sk_TYPE_find's return value.

In some cases it's about redundant check for return value, in some
cases it's about replacing check for -1 with comparison to 0.
Otherwise compiler might generate redundant check for <-1. [Even
formatting and readability fixes.]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)

x509/x509name.c: fix potential crash in X509_NAME_get_text_by_OBJ.

Documentation says "at most B<len> bytes will be written", which
formally doesn't prohibit zero. But if zero B<len> was passed, the
call to memcpy was bound to crash.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)

INSTALL,NOTES.ANDROID: minor updates.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6866)

Make EVP_PKEY_asn1_new() stricter with its input

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6880)

Relocate memcmp test.

The CRYPTO_memcmp test isn't testing the test framework.
It would seem to better belong in the sanity tests.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6878)

Ensure we send an alert on error when processing a ticket

In some scenarios the connection could fail without an alert being sent.
This causes a later assertion failure.

Thanks to Quarkslab for reporting this.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6852)

s390x assembly pack: add KIMD/KLMD code path for sha3/shake

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5935)

Fix some undefined behaviour in the Curve448 code (2nd attempt)

Fixes #6800
Replaces #5418

This commit reverts commit 7876dbffcee9 and moves the check for a
zero-length input down the callstack into sha3_update().

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6838)

Fix uninitialized value $s warning in windows static builds

Fixes: #6826

[extended tests]

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6833)

asn1/tasn_utl.c: fix logical error in and overhaul asn1_do_lock.

CRYPTO_atomic_add was assumed to return negative value on error, while
it returns 0.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add OIDs for HMAC SHA512/224 and HMAC SHA512/256.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6830)

Ensure symbols don't get deprecated too early

There are symbols we've marked for deprecation in OpenSSL 1.2.0.  We
must ensure that they don't actually become deprecated before that.

Fixes #6814

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6824)

Some protocol versions are build-time

Clarify docs to list that some protocol flags might not be available
depending on how OpenSSL was build.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6816)

Fix some TLSv1.3 alert issues

Ensure that the certificate required alert actually gets sent (and doesn't
get translated into handshake failure in TLSv1.3).

Ensure that proper reason codes are given for the new TLSv1.3 alerts.

Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left
over from an earlier TLSv1.3 draft that is no longer used.

Fixes #6804

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6809)

Deprecate the EC curve type specific functions in 1.2.0

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6815)

Use the new non-curve type specific EC functions internally

Fixes #6646

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6815)

Add documentation for the new non-curve type specific EC functions

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6815)

Provide EC functions that are not curve type specific

Some EC functions exist in *_GFp and *_GF2m forms, in spite of the
implementations between the two curve types being identical. This
commit provides equivalent generic functions with the *_GFp and *_GF2m
forms just calling the generic functions.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6815)

Check return from BN_sub

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6823)

Check conversion return in ASN1_INTEGER_print_bio.

Also streamline the code by relying on ASN1_INTEGER_to_BN to allocate the
BN instead of doing it separately.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6821)

apps/dsaparam.c generates code that is intended to be pasted or included
into an existing source file: the function is static, and the code
doesn't include dsa.h.  Match the generated C source style of dsaparam.

Adjust apps/dhparam.c to match, and rename the BIGNUMs to their more
usual single-letter names.  Add an error return in the generated C source.

both: simplify the callback function

Signed-off-by: Beat Bolli <dev@drbeat.li>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6797)

Add test for DSA signatures of raw digests of various sizes

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6749)

Remove DSA digest length checks when no digest is passed

FIPS 186-4 does not specify a hard requirement on DSA digest lengths,
and in any case the current check rejects the FIPS recommended digest
lengths for key sizes != 1024 bits.

Fixes: #6748

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6749)

doc/BN_generate_prime: update doc about other callback values

This here page only documents the callback values 0 to 2, but the
callers of BN_generate_prime_ex() call it with the value 3.

The list of manual pages in the SEE ALSO section was extended with the
output from

    git grep BN_GENCB_call.*[3-9]

while in the doc/man3 directory.

Signed-off-by: Beat Bolli <dev@drbeat.li>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6802)

Improve backwards compat for SSL_get_servername()

Commit 1c4aa31d79821dee9be98e915159d52cc30d8403 changed how we process
and store SNI information during the handshake, so that a hostname is
only saved in the SSL_SESSION structure if that SNI value has actually
been negotiated.  SSL_get_servername() was adjusted to match, with a new
conditional being added to handle the case when the handshake processing
is ongoing, and a different location should be consulted for the offered
SNI value.  This was done in an attempt to preserve the historical
behavior of SSL_get_servername(), a function whose behavior only mostly
matches its documentation, and whose documentation is both lacking and
does not necessarily reflect the actual desired behavior for such an
API.  Unfortunately, sweeping changes that would bring more sanity to
this space are not possible until OpenSSL 1.2.0, for ABI compatibility
reasons, so we must attempt to maintain the existing behavior to the
extent possible.

The above-mentioned commit did not take into account the behavior
of SSL_get_servername() during resumption handshakes for TLS 1.2 and
prior, where no SNI negotiation is performed.  In that case we would
not properly parse the incoming SNI and erroneously return NULL as
the servername, when instead the logical session is associated with
the SNI value cached in the SSL_SESSION.  (Note that in some cases an
SNI callback may not need to do anything in a TLS 1.2 or prior resumption
flow, but we are calling the callbacks and did not provide any guidance
that they should no-op if the connection is being resumed, so we must
handle this case in a usable fashion.)  Update our behavior accordingly to
return the session's cached value during the handshake, when resuming.
This fixes the boringssl tests.

[extended tests]

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6792)

Fix ossl_shim SNI handling

To start with, actually set an SNI callback (copied from bssl_shim); we
weren't actually testing much otherwise (and just happened to have been
passing due to buggy libssl behavior prior to
commit 1c4aa31d79821dee9be98e915159d52cc30d8403).

Also use proper C++ code for handling C strings -- when a C API
(SSL_get_servername()) returns NULL instead of a string, special-case
that instead of blindly trying to compare NULL against a std::string,
and perform the comparsion using the std::string operators instead of
falling back to pointer comparison.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6792)

EC GFp ladder

This commit leverages the Montgomery ladder scaffold introduced in #6690
(alongside a specialized Lopez-Dahab ladder for binary curves) to
provide a specialized differential addition-and-double implementation to
speedup prime curves, while keeping all the features of
`ec_scalar_mul_ladder` against SCA attacks.

The arithmetic in ladder_pre, ladder_step and ladder_post is auto
generated with tooling, from the following formulae:

- `ladder_pre`: Formula 3 for doubling from Izu-Takagi "A fast parallel
  elliptic curve multiplication resistant against side channel attacks",
  as described at
  https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#doubling-dbl-2002-it-2
- `ladder_step`: differential addition-and-doubling Eq. (8) and (10)
  from Izu-Takagi "A fast parallel elliptic curve multiplication
  resistant against side channel attacks", as described at
  https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#ladder-ladd-2002-it-3
- `ladder_post`: y-coordinate recovery using Eq. (8) from Brier-Joye
  "Weierstrass Elliptic Curves and Side-Channel Attacks", modified to
  work in projective coordinates.

Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6772)

00-base-templates.conf: engage x25519-ppc64 module.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6782)

Add ec/asm/x25519-ppc64.pl module.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6782)

bn/bn_mod.c: harmonize BN_mod_add_quick with original implementation.

New implementation failed to correctly reset r->neg flag. Spotted by
OSSFuzz.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6783)

apps/apps.c: harmonize print_bignum_var output with coding style.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix inconsisten use of bit vs bits

Reviewed-by: Tim Hudson <tjh@openssl.org>
GH: #6794

Fix a trivial coding style nit in sm2_sign.c

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #6787

Make number of Miller-Rabin tests for a prime tests depend on the security level of the prime

The old numbers where all generated for an 80 bit security level. But
the number should depend on security level you want to reach. For bigger
primes we want a higher security level and so need to do more tests.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #6075
Fixes: #6012

Change the number of Miller-Rabin test for DSA generation to 64

This changes the security level from 100 to 128 bit.
We only have 1 define, this sets it to the highest level supported for
DSA, and needed for keys larger than 3072 bit.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #6075

Fixed issue where DRBG_CTR fails if NO_DF is used - when entropy is called

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6778)

Check for failures, to avoid memory leak

Thanks to Jiecheng Wu, Zuxing Gu for the report.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6791)

crypto/init.c: use destructor_key even as guard in OPENSSL_thread_stop.

Problem was that Windows threads that were terminating before libcrypto
was initialized were referencing uninitialized or possibly even
unrelated thread local storage index.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)

crypto/dllmain.c: remove unused OPENSSL_NONPIC_relocated variable.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)

crypto/cryptlib.c: resolve possible race in OPENSSL_isservice.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)

crypto/cryptlib.c: make OPENSS_cpuid_setup safe to use as constructor.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)

INSTALL,NOTES.WIN: classify no-asm as non-production option.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6773)

ec/ecp_nistz256.c: fix Coverity nit.

|ctx| recently became unconditionally non-NULL and is already dereferenced
earlier.

Reviewed-by: Rich Salz <rsalz@openssl.org>

apps/dsaparam.c: make dsaparam -C output strict-warnings-friendly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Configure death handler: instead of printing directly, amend the message

This is done by calling die again, just make sure to reset the __DIE__
handler first.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)

Configure death handler: remember to call original death handler

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)

Configure death handler: bail out early when run in eval block

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)

Remove zero special-case in BN_mod_exp_mont.

A number intended to treat the base as secret should not be branching on
whether it is zero. Test-wise, this is covered by existing tests in bnmod.txt.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6733)

Configure: print generic advice when dying

On the same note, change the 'NASM not found' message to give specific
advice on how to handle the failure.

Fixes #6765

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6771)

Update sm2_crypt.c

asn1_encode : x, y  =>    0 | x，0 | y
(because of DER encoding rules when x and y have high bit set)

CLA: Trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6694)

def_load_bio(): Free |biosk| more carefully

If there's anything in the |biosk| stack, the first element is always
the input BIO.  It should never be freed in this function, so we must
take careful steps not to do so inadvertently when freeing the stack.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6769)

.travis.yml: omit linux-ppc64le target.

Build jobs keep timing out initializing...

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>

Make sure the 'tsget' script is called 'tsget.pl' everywhere

The result is that we don't have to produce different names on
different platforms, and we won't have confusion on Windows depending
on if the script was built with mingw or with MSVC.

Partial fix for #3254

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6764)

Add a note about aborts encountered while sending early_data

In some circumstances it is possible for a client to have a session
reporting a max early data value that is greater than the server will
support. In such cases the client could encounter an aborted connection.

Fixes #6735

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6740)

ec/ecp_nistz256.c: fix ecp_nistz256_set_from_affine.

ecp_nistz256_set_from_affine is called when application attempts to use
custom generator, i.e. rarely. Even though it was wrong, it didn't
affect point operations, they were just not as fast as expected.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)

ec/asm/ecp_nistz256-{!x86_64}.pl: fix scatter_w7 function.

The ecp_nistz256_scatter_w7 function is called when application
attempts to use custom generator, i.e. rarely. Even though non-x86_64
versions were wrong, it didn't affect point operations, they were just
not as fast as expected.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)

bn/bn_intern.c: const-ify bn_set_{static}_words.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)

apps/dsaparam.c: fix -C output.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6758)

Configure: Display error/warning on deprecated/unsupported options after loop

Fixes #6755

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6759)

PKCS12: change safeContentsBag from a SET OF to a SEQUENCE OF

As per RFC 7292.

Fixes #6665

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6708)

Add TODO comment for a nonsensical public API

The API used to set what SNI value to send in the ClientHello
can also be used on server SSL objects, with undocumented and
un-useful behavior.  Unfortunately, when generic SSL_METHODs
are used, s->server is still set, prior to the start of the
handshake, so we cannot prevent this nonsensical usage at the
present time.  Leave a note to revisit this when ABI-breaking
changes are permitted.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)

Normalize SNI hostname handling for SSL and SSL_SESSION

In particular, adhere to the rule that we must not modify any
property of an SSL_SESSION object once it is (or might be) in
a session cache.  Such modifications are thread-unsafe and have
been observed to cause crashes at runtime.

To effect this change, standardize on the property that
SSL_SESSION->ext.hostname is set only when that SNI value
has been negotiated by both parties for use with that session.
For session resumption this is trivially the case, so only new
handshakes are affected.

On the client, the new semantics are that the SSL->ext.hostname is
for storing the value configured by the caller, and this value is
used when constructing the ClientHello.  On the server, SSL->ext.hostname
is used to hold the value received from the client.  Only if the
SNI negotiation is successful will the hostname be stored into the
session object; the server can do this after it sends the ServerHello,
and the client after it has received and processed the ServerHello.

This obviates the need to remove the hostname from the session object
in case of failed negotiation (a change that was introduced in commit
9fb6cb810b769abbd60f11ef6e936a4e4456b19d in order to allow TLS 1.3
early data when SNI was present in the ClientHello but not the session
being resumed), which was modifying cached sessions in certain cases.
(In TLS 1.3 we always produce a new SSL_SESSION object for new
connections, even in the case of resumption, so no TLS 1.3 handshakes
were affected.)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)

const-ify some input SSL * arguments

These tiny functions only read from the input SSL, and we are
about to use them from functions that only have a const SSL* available,
so propagate const a bit further.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)

crypto/*: address standard-compilance nits.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

bio/bss_dgram.c: harmonize usage of OPENSSL_USE_IPV6 with the rest.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

include/openssl/e_os2.h: define last-resort SSIZE_MAX.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

ec/ec_lcl.h: fix pre-C9x compilation problems.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

.travis.yml: exercise -std=c89 in order to catch corresponding problems.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

Validate legacy_version

The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.

Fixes #6600

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)

Update the TLSv1.3 test vectors

Use the latest version of the test vectors available in:
https://tools.ietf.org/html/draft-ietf-tls-tls13-vectors-06

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6746)

Test early_data sent after a second ClientHello causes a failure

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6737)

Don't skip over early_data if we sent an HRR

It is not valid to send early_data after an HRR has been received.

Fixes #6734

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6737)

CHANGES: mention blinding reverting in ECDSA. [skip ci]

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

ec/ecdsa_ossl.c: switch to fixed-length Montgomery multiplication.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

ec/ecdsa_ossl.c: formatting and readability fixes.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

ec/ecdsa_ossl.c: revert blinding in ECDSA signature.

Originally suggested solution for "Return Of the Hidden Number Problem"
is arguably too expensive. While it has marginal impact on slower
curves, none to ~6%, optimized implementations suffer real penalties.
Most notably sign with P-256 went more than 2 times[!] slower. Instead,
just implement constant-time BN_mod_add_quick.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

bn/bn_lib.c address Coverity nit in bn2binpad.

It was false positive, but one can as well view it as readability issue.
Switch even to unsigned indices because % BN_BYTES takes 4-6 instructions
with signed dividend vs. 1 (one) with unsigned.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test for mismatch between key OID and sig alg

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)

Check that the public key OID matches the sig alg

Using the rsa_pss_rsae_sha256 sig alg should imply that the key OID is
rsaEncryption. Similarly rsa_pss_pss_sha256 implies the key OID is
rsassaPss. However we did not check this and incorrectly tolerated a key
OID that did not match the sig alg sent by the peer.

Fixes #6611

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)

Fix typo in x25519-x86_64.pl

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6726)

Skip the GOST test where appropriate

The GOST ciphers are dynamically loaded via the GOST engine, so we must
be able to support that. The engine also uses DSA and CMS symbols, so we
skip the test on no-dsa or no-cms.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6730)

Fix a memory leak in the ticket test

Also fixes a function name typo.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6729)

Fix no-psk

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6724)

Test that a failed resumption issues the correct number of tickets

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Always issue new tickets when using TLSv1.3 stateful tickets

Previously we were failing to issue new tickets if a resumption attempt
failed.

Fixes #6654

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Improve testing of stateful tickets

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Don't remove sessions from the cache during PHA in TLSv1.3

If we issue new tickets due to post-handshake authentication there is no
reason to remove previous tickets from the cache. The code that did that
only removed the last session anyway - so if more than one ticket got
issued then those other tickets are still valid.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Improve documentation about reading and writing

Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6240