Wolfgang Denk [Wed, 21 Mar 2007 22:26:15 +0000 (23:26 +0100)]
Code cleanup. Update CHANGELOG
Wolfgang Denk [Wed, 21 Mar 2007 22:11:22 +0000 (23:11 +0100)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Stefan Roese [Wed, 21 Mar 2007 13:54:29 +0000 (14:54 +0100)]
ppc4xx: Fix file mode of include/configs/acadia.h
Signed-off-by: Stefan Roese <sr@denx.de>
Markus Klotzbuecher [Wed, 21 Mar 2007 13:41:46 +0000 (14:41 +0100)]
SPC1920: fix small clock routing bug
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Stefan Roese [Wed, 21 Mar 2007 13:38:25 +0000 (14:38 +0100)]
Merge with /home/stefan/git/u-boot/acadia
Stefan Roese [Wed, 21 Mar 2007 12:39:57 +0000 (13:39 +0100)]
[PATCH] Add AMCC Acadia (405EZ) eval board support
This patch adds support for the new AMCC Acadia eval board.
Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 21 Mar 2007 12:38:59 +0000 (13:38 +0100)]
[PATCH] Add AMCC PPC405EZ support
This patch adds support for the new AMCC 405EZ PPC. It is in
preparation for the AMCC Acadia board support.
Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Wed, 21 Mar 2007 09:23:56 +0000 (10:23 +0100)]
Merge with /home/hs/TQ/u-boot
Heiko Schocher [Wed, 21 Mar 2007 07:45:17 +0000 (08:45 +0100)]
[PATCH] TQM8272: dont change the bits given from the HRCW
for the SIUMCR and BCR Register.
Fix the calculation for the EEprom Size
Signed-off-by: Heiko Schocher <hs@denx.de>
Aubrey Li [Tue, 20 Mar 2007 14:58:25 +0000 (22:58 +0800)]
Merge http://www.denx.de/git/u-boot
Aubrey Li [Tue, 20 Mar 2007 10:16:24 +0000 (18:16 +0800)]
[Blackfin][PATCH] Add BF561 EZKIT board support
Aubrey Li [Mon, 19 Mar 2007 15:01:15 +0000 (23:01 +0800)]
Merge http://www.denx.de/git/u-boot
Aubrey Li [Mon, 19 Mar 2007 14:55:58 +0000 (22:55 +0800)]
[Blackfin][PATCH] minor cleanup
Wolfgang Denk [Mon, 19 Mar 2007 12:10:08 +0000 (13:10 +0100)]
Remove obsoleted POST files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Aubrey Li [Sun, 18 Mar 2007 17:26:11 +0000 (01:26 +0800)]
[PATCH] Add flash chip M29W320ET/B support
Aubrey Li [Sun, 18 Mar 2007 17:24:52 +0000 (01:24 +0800)]
[Blackfin][PATCH] Add BF537 stamp board support
Wolfgang Denk [Fri, 16 Mar 2007 21:20:36 +0000 (22:20 +0100)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Stefan Roese [Fri, 16 Mar 2007 20:11:42 +0000 (21:11 +0100)]
[PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
DDR memory are dynamically programmed matching the total size
of the equipped memory (DIMM modules).
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Tue, 13 Mar 2007 12:38:05 +0000 (13:38 +0100)]
[PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
boards in terms of unification.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Wolfgang Denk [Tue, 13 Mar 2007 15:05:55 +0000 (16:05 +0100)]
Make SC3 board build with 'make O='; use 'addcons' consistently
(SC3 and Jupiter used to use 'addcon' instead).
Signed-off-by: Wolfgang Denk wd@denx.de
Wolfgang Denk [Tue, 13 Mar 2007 10:33:35 +0000 (11:33 +0100)]
Merge with /home/hs/jupiter/u-boot
Heiko Schocher [Tue, 13 Mar 2007 08:40:59 +0000 (09:40 +0100)]
[PATCH] update board config for jupiter Board:
added Hush Shell,
CONFIG_CMDLINE_EDITING,
CFG_ENV_ADDR_REDUND activated
Signed-off-by: Heiko Schocher <hs@denx.de>
Aubrey Li [Mon, 12 Mar 2007 04:11:55 +0000 (12:11 +0800)]
[Blackfin][PATCH] minor cleanup
Aubrey Li [Sun, 11 Mar 2007 17:42:06 +0000 (01:42 +0800)]
[Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
Aubrey Li [Sun, 11 Mar 2007 16:25:14 +0000 (00:25 +0800)]
[Blackfin][PATCH] code cleanup
Michal Simek [Sun, 11 Mar 2007 12:48:24 +0000 (13:48 +0100)]
[Microblaze][PATCH] part 2
timer support
interrupt controller support
flash support
ethernet support
cache support
board information support
env support
booting image support
adding support for Xilinx ML401
Michal Simek [Sun, 11 Mar 2007 12:42:58 +0000 (13:42 +0100)]
[Microblaze][PATCH]
timer support
interrupt controller support
flash support
ethernet support
cache support
board information support
env support
booting image support
adding support for Xilinx ML401
Aubrey Li [Sat, 10 Mar 2007 15:49:29 +0000 (23:49 +0800)]
[Blackfin][PATCH] code cleanup
Aubrey.Li [Fri, 9 Mar 2007 05:40:56 +0000 (13:40 +0800)]
[Blackfin][PATCH-2/2] Common files changed to support bf533 platform
Aubrey.Li [Fri, 9 Mar 2007 05:38:44 +0000 (13:38 +0800)]
[Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
Wolfgang Denk [Thu, 8 Mar 2007 22:06:12 +0000 (23:06 +0100)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Stefan Roese [Thu, 8 Mar 2007 22:00:08 +0000 (23:00 +0100)]
ppc4xx: Fix file mode of sequoia.c
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Thu, 8 Mar 2007 21:52:51 +0000 (22:52 +0100)]
Minor cleanup.
John Otken john@softadvances.com [Thu, 8 Mar 2007 15:39:48 +0000 (09:39 -0600)]
ppc4xx: Clear Sequoia/Rainier security engine reset bits
Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
Wolfgang Denk [Thu, 8 Mar 2007 21:42:44 +0000 (22:42 +0100)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc83xx
Matthias Fuchs [Thu, 8 Mar 2007 15:26:52 +0000 (16:26 +0100)]
[PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Thu, 8 Mar 2007 15:25:47 +0000 (16:25 +0100)]
[PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Thu, 8 Mar 2007 15:23:11 +0000 (16:23 +0100)]
[PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Thu, 8 Mar 2007 15:20:32 +0000 (16:20 +0100)]
[PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Wed, 7 Mar 2007 14:32:01 +0000 (15:32 +0100)]
fixed ethernet phy configuration for plu405 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Wolfgang Denk [Thu, 8 Mar 2007 20:49:27 +0000 (21:49 +0100)]
Minor cleanup
Wolfgang Denk [Thu, 8 Mar 2007 20:45:04 +0000 (21:45 +0100)]
Merge with /home/hs/jupiter/u-boot
Wolfgang Denk [Thu, 8 Mar 2007 10:41:19 +0000 (11:41 +0100)]
Merge with /home/git/u-boot
Wolfgang Denk [Thu, 8 Mar 2007 10:38:58 +0000 (11:38 +0100)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Wolfgang Denk [Thu, 8 Mar 2007 10:34:24 +0000 (11:34 +0100)]
Merge with /home/git/u-boot
Stefan Roese [Thu, 8 Mar 2007 09:32:45 +0000 (10:32 +0100)]
Merge with /home/stefan/git/u-boot/yucca-ddr2
Stefan Roese [Thu, 8 Mar 2007 09:13:16 +0000 (10:13 +0100)]
[PATCH] Update AMCC Luan 440SP eval board support
The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
inititializition. This includes DDR auto calibration and support
for different DIMM modules, instead of the fixed setup used in
the earlier version.
This patch also enables the cache in FLASH for the startup
phase of U-Boot (while running from FLASH). After relocating to
SDRAM the cache is disabled again. This will speed up the boot
process, especially the SDRAM setup, since there are some loops
for memory testing (auto calibration).
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 8 Mar 2007 09:10:18 +0000 (10:10 +0100)]
[PATCH] Update AMCC Yucca 440SPe eval board support
The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
inititializition. This includes DDR auto calibration and support
for different DIMM modules, instead of the fixed setup used in
the earlier version.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 8 Mar 2007 09:07:18 +0000 (10:07 +0100)]
ppc4xx: Small AMCC Katmai 440SPe update
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 8 Mar 2007 09:06:09 +0000 (10:06 +0100)]
ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
Signed-off-by: Stefan Roese <sr@denx.de>
Ed Swarthout [Wed, 7 Mar 2007 18:14:50 +0000 (12:14 -0600)]
net - Support ping reply when processing net-loop
Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
This permits the ping command to test the phy interface when the phy
is put in loopback mode (typically by setting register 0 bit 14).
It also allows the port to respond to an external ping when u-boot is
processing some other net command (such as tftp). This is useful when
tftp appears to hang.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
Wolfgang Denk [Wed, 7 Mar 2007 15:50:34 +0000 (16:50 +0100)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Stefan Roese [Wed, 7 Mar 2007 15:43:00 +0000 (16:43 +0100)]
[PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
DDR memory are dynamically programmed matching the total size
of the equipped memory (DIMM modules).
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 7 Mar 2007 15:39:36 +0000 (16:39 +0100)]
[PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
This patch fixes a problem that occurs when 2 DIMM's are
used. This problem was first spotted and fixed by Gerald Jackson
<gerald.jackson@reaonixsecurity.com> but this patch fixes the
problem in a little more clever way.
This patch also adds the nice functionality to dynamically
create the TLB entries for the SDRAM (tlb.c). So we should
never run into such problems with wrong (too short) TLB
initialization again on these platforms.
As this feature is new to the "old" 44x SPD DDR driver, it
has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Wed, 7 Mar 2007 15:33:44 +0000 (16:33 +0100)]
UC101: fix compiler warnings
Wolfgang Denk [Wed, 7 Mar 2007 15:19:46 +0000 (16:19 +0100)]
HMI1001: fix build error, cleanup compiler warnings.
Wolfgang Denk [Tue, 6 Mar 2007 17:08:43 +0000 (18:08 +0100)]
Restructure POST directory to support of other CPUs, boards, etc.
Wolfgang Denk [Tue, 6 Mar 2007 17:01:47 +0000 (18:01 +0100)]
Fix HOSTARCH handling.
Patch by Mike Frysinger, Mar 05 2007
Stefan Roese [Tue, 6 Mar 2007 06:47:04 +0000 (07:47 +0100)]
[PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
As provided by the AMCC applications team, this patch optimizes the
DDR2 setup for 166MHz bus speed. The values provided are also save
to use on a "normal" 133MHz PLB bus system. Only the refresh counter
setup has to be adjusted as done in this patch.
For this the NAND booting version had to include the "speed.c" file
from the cpu/ppc4xx directory. With this addition the NAND SPL image
will just fit into the 4kbytes of program space. gcc version 4.x as
provided with ELDK 4.x is needed to generate this optimized code.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 4 Mar 2007 00:36:05 +0000 (01:36 +0100)]
Some code cleanup.
Wolfgang Denk [Sun, 4 Mar 2007 00:17:20 +0000 (01:17 +0100)]
Merge ... opensource.freescale.com/u-boot-7448hpc2.git
Kim Phillips [Wed, 28 Feb 2007 06:02:04 +0000 (00:02 -0600)]
mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
(cherry picked from
c5bf13b02284c3204a723566a9bab700e5059659 commit)
Kumar Gala [Wed, 28 Feb 2007 05:51:42 +0000 (23:51 -0600)]
mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
The config value for:
* CFG_ACR_PIPE_DEP
* CFG_ACR_RPTCNT
* CFG_SPCR_TSEC1EP
* CFG_SPCR_TSEC2EP
* CFG_SCCR_TSEC1CM
* CFG_SCCR_TSEC2CM
Were not being used when setting the appropriate register
Added:
* CFG_SCCR_USBMPHCM
* CFG_SCCR_USBDRCM
* CFG_SCCR_PCICM
* CFG_SCCR_ENCCM
To allow full config of the SCCR.
Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
that were just bogus.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Fri, 23 Feb 2007 02:06:57 +0000 (20:06 -0600)]
mpc83xx: update [local-]mac-address properties on UEC based devices
8360 and 832x weren't updating their [local-]mac-address
properties. This patch fixes that.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Timur Tabi [Tue, 13 Feb 2007 16:41:42 +0000 (10:41 -0600)]
mpc83xx: write MAC address to mac-address and local-mac-address
Some device trees have a mac-address property, some have local-mac-address,
and some have both. To support all of these device trees, this patch
updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
This function already updates local-mac-address.
Signed-off-by: Timur Tabi <timur@freescale.com>
Kim Phillips [Wed, 28 Feb 2007 00:41:08 +0000 (18:41 -0600)]
mpc83xx: add command line editing by default
Kim Phillips [Thu, 15 Feb 2007 01:50:53 +0000 (19:50 -0600)]
mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
Disable G1TXCLK, G2TXCLK h/w buffers. This patch
fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
Xie Xiaobo [Wed, 14 Feb 2007 10:27:17 +0000 (18:27 +0800)]
mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
it pass DDR/DDR2 compliance tests.
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Xie Xiaobo [Wed, 14 Feb 2007 10:27:06 +0000 (18:27 +0800)]
mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
MPC8360E rev2.0 have new spridr,and PVR value,
The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Xie Xiaobo [Wed, 14 Feb 2007 10:26:44 +0000 (18:26 +0800)]
mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
MPC8349E rev3.1 have new spridr,and PVR value,
The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
Joakim Tjernlund [Wed, 31 Jan 2007 10:04:19 +0000 (11:04 +0100)]
mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
which is used to se if an slave will ACK after receiving its address.
Correct i2c probing to use this method as the old method could upset
a slave as it wrote a data byte to it.
Add a small delay in i2c_init() to let the controller
shutdown any ongoing I2C activity.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Timur Tabi [Wed, 31 Jan 2007 21:54:29 +0000 (15:54 -0600)]
mpc83xx: Add support for the MPC8349E-mITX-GP
Add support for the MPC8349E-mITX-GP, a stripped-down version of the
MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
Signed-off-by: Timur Tabi <timur@freescale.com>
Timur Tabi [Wed, 31 Jan 2007 21:54:20 +0000 (15:54 -0600)]
mpc83xx: Delete sdram_init() for MPC8349E-mITX
There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
never does anything. This patch deletes it.
Signed-off-by: Timur Tabi <timur@freescale.com>
Dave Liu [Fri, 19 Jan 2007 02:43:26 +0000 (10:43 +0800)]
mpc83xx: Fix the LAW1/3 bug
The patch solves the alignment problem of the local bus access windows to
render accessible the memory bank and PHY registers of UPC 1 (starting at
0xf801 0000). What we actually did was to adjust the sizes of the bus
access windows so that the base address alignment requirement would be met.
Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
Signed-off-by: Gridish Shlomi <gridish@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Kim Phillips [Tue, 30 Jan 2007 22:15:31 +0000 (16:15 -0600)]
mpc83xx: don't hang if watchdog configured on 8360, 832x
don't hang if watchdog configured on 8360, 832x
The watchdog programming model is the same across all 83xx devices;
make the code reflect that.
Kim Phillips [Tue, 30 Jan 2007 22:15:21 +0000 (16:15 -0600)]
mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
protect memcpy to bad address if a local-mac-address is missing from dt
Kim Phillips [Tue, 30 Jan 2007 22:15:04 +0000 (16:15 -0600)]
mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
make 8360 default environment fdt be 8360 (not 8349)
Emilian Medve [Tue, 30 Jan 2007 22:14:50 +0000 (16:14 -0600)]
mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
be used for busy-waiting since it strips the 'volatile' property from
the bd variable. gcc3 was working by pure luck.
This is a follow on patch to "Fix the UEC driver bug of QE"
Kumar Gala [Tue, 30 Jan 2007 20:08:30 +0000 (14:08 -0600)]
mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
MPC834X class processors. Change the protections from CONFIG_MPC8349 to
CONFIG_MPC834X so they are more generic.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Thu, 25 Jan 2007 19:40:55 +0000 (13:40 -0600)]
mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
Kim Phillips [Wed, 24 Jan 2007 23:18:37 +0000 (17:18 -0600)]
mpc83xx: sort Makefile targets
reordered targets alphabetically
Paul Gortmaker [Tue, 16 Jan 2007 16:38:14 +0000 (11:38 -0500)]
mpc83xx: U-Boot support for Wind River SBC8349
I've redone the SBC8349 support to match git-current, which
incorporates all the MPC834x updates from Freescale since the 1.1.6
release, including the DDR changes.
I've kept all the SBC8349 files as parallel as possible to the
MPC8349EMDS ones for ease of maintenance and to allow for easy
inspection of what was changed to support this board. Hence the SBC8349
U-Boot has FDT support and everything else that the MPC8349EMDS has.
Fortunately the Freescale updates added support for boards using CS0,
but I had to change spd_sdram.c to allow for board specific settings for
the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
default if the board doesn't specify a value.)
Hopefully this should be mergeable as-is and require no whitespace
cleanups or similar, but if something doesn't measure up then let me
know and I'll fix it.
Thanks,
Paul.
Sam Song [Thu, 14 Dec 2006 11:03:21 +0000 (19:03 +0800)]
mpc83xx: Remove a redundant semicolon in mpc8349itx.c
A redundant semicolon existed in mpc8349itx.c
should be removed.
Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
Jerry Van Baren [Thu, 7 Dec 2006 02:23:55 +0000 (21:23 -0500)]
mpc83xx: Put the version (and magic) after the HRCW.
Put the version (and magic) after the HRCW. This puts it in a fixed
location in flash, not at the start of flash but as close as we can get.
Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
Dave Liu [Thu, 7 Dec 2006 13:14:51 +0000 (21:14 +0800)]
mpc83xx: Add the MPC832XEMDS board readme
Add the MPC832XEMDS board readme
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Thu, 7 Dec 2006 13:13:15 +0000 (21:13 +0800)]
mpc83xx: Add support for the MPC832XEMDS board
This patch supports DUART, ETH3/4 and PCI etc.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Thu, 7 Dec 2006 13:11:58 +0000 (21:11 +0800)]
mpc83xx: streamline the 83xx immr head file
For better format and style, I streamlined the 83xx head files,
including immap_83xx.h and mpc83xx.h. In the old head files, 1)
duplicated macro definition appear in the both files; 2) the structure
of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
macro definition put inside the each structure. So, I cleaned up the
structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
moved the macro definition to mpc83xx.h, Just like MPC8260.
CHANGELOG
*streamline the 83xx immr head file
Signed-off-by: Dave Liu <daveliu@freescale.com>
Dave Liu [Wed, 6 Dec 2006 03:38:17 +0000 (11:38 +0800)]
mpc83xx: Fix the UEC driver bug of QE
The patch prevents the GCC tool chain from striping useful code for
optimization. It will make UEC ethernet driver workable, Otherwise the
UEC will fail in tx when you are using gcc4.x. but the driver can work
when using gcc3.4.3.
CHANGELOG
*Prevent the GCC from striping code for optimization, Otherwise the UEC
will tx failed when you are using gcc4.x.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Stefan Roese [Fri, 2 Mar 2007 05:58:53 +0000 (06:58 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Stefan Roese [Thu, 1 Mar 2007 20:16:58 +0000 (21:16 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-sr
Stefan Roese [Thu, 1 Mar 2007 20:16:02 +0000 (21:16 +0100)]
Merge with /home/stefan/git/u-boot/denx-merge-sr
Stefan Roese [Thu, 1 Mar 2007 20:12:06 +0000 (21:12 +0100)]
Merge with /home/sr/git/u-boot/denx
Stefan Roese [Thu, 1 Mar 2007 20:11:36 +0000 (21:11 +0100)]
[PATCH] Update AMCC Katmai 440SPe eval board support
This patch updates the recently added Katmai board support. The biggest
change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
driver.
Please note, that still some problems are left with some memory
configurations. See the driver for more details.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 1 Mar 2007 06:03:25 +0000 (07:03 +0100)]
[PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
Signed-off-by: Stefan Roese <sr@denx.de>
roy zang [Wed, 28 Feb 2007 08:46:48 +0000 (16:46 +0800)]
Merge branch 'master' into hpc2
Conflicts:
drivers/Makefile
Fix the merge conflict in file drivers/Makefile
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Wolfgang Denk [Wed, 28 Feb 2007 00:28:53 +0000 (01:28 +0100)]
SC3: fix typo in default environment
Sergei Poselenov [Tue, 27 Feb 2007 17:15:30 +0000 (20:15 +0300)]
MCC200: Fixes for update procedure
- fix logic error in image type handling
- make sure file system images (cramfs etc.) get stored in flash
with image header stripped so they can be mounted through MTD
Stefan Roese [Tue, 27 Feb 2007 20:56:06 +0000 (21:56 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Wolfgang Denk [Tue, 27 Feb 2007 13:26:04 +0000 (14:26 +0100)]
Minor code cleanup.
Sergei Poselenov [Tue, 27 Feb 2007 09:40:16 +0000 (12:40 +0300)]
MCC200 update - add LCD Progress Indicator