Add TLSv1.3 draft-19 messages to trace

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2970)

Handle TLSv1.3 being disabled in clienthello test

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2968)

Add tests for the padding extension

Check that the padding extension pads correctly for various scenarios.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2968)

Fix the Padding extension

In OpenSSL 1.1.0 the padding extension MUST be last because it calculates
the length of everything that has been written into the ClientHello to
determine whether it needs to be padded or not. With TLSv1.3 that isn't
possible because the specification requires that the PSK extension is last.
Therefore we need to fix the padding extension to take account of any PSK
extension that will be later added.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2968)

Updates following review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Add some HRR tests

Check that we handle changes of ciphersuite between HRR and ServerHello
correctly.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Add some more PSK tests

Test that if the server selects a ciphersuite with a different hash from
the PSK in the original ClientHello, the second ClientHello does not
contain the PSK.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Fix ciphersuite handling during an HRR

Choose a new ciphersuite for the HRR. Don't just use the one from the
session.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Ensure after an HRR any PSKs have the right hash

Don't include a PSK that does not have the right hash for the selected
ciphersuite following an HRR.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

HelloRetryRequest updates for draft-19

Draft-19 changes the HRR transcript hash so that the initial ClientHello
is replaced in the transcript with a special synthetic message_hash message
that just contains a hash of ClientHello1 as its message body.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Check ClientHello boundary as per draft-19

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Merge early_data_info extension into early_data

As per draft-19

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Update end of early data processing for draft-19

The end of early data is now indicated by a new handshake message rather
than an alert.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Update the TLSv1.3 secrets test vectors for draft-19

These are self-generated test vectors which gives us very little
confidence that we've got the implementation right. However until
we can get vectors from somewhere else (or ideally official vectors)
this is all we've got. At least it will tell us if we accidentally
break something at some point in the future.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Update secret generation for draft-19

TLSv1.3 draft 19 introduces a new pre HKDF-extract Derive-Secret stage.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Update the TLSv1.3 version indicator for draft-19

This change will mean we will lose interoperability with draft-18
implementations.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Fix typo in ASYNC_WAIT_CTX_new.pod doc

For the function that get the changed fds, it should be
'ASYNC_WAIT_CTX_get_changed_fds()' instead of 'ASYNC_WAIT_CTX_fds_have_changed()'.

CLA: trivial

Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2966)

Simplify code around next_proto.len by changing 'len' data type.

clean an useless static qualifier and a dead comment.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2278)

Remove documentation of deleted function

It's even removing a BUGS entry!

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2797)

Remove unused typedefs from indent config

Some things were not removed from util/indent.pro when they were removed
from the code.

grep '^-T' util/indent.pro | awk '{print $2} > /tmp/a
grep -rF -f /tmp/a --exclude CHANGES --exclude 'INSTALL' --exclude 'LICENSE' --exclude 'NEWS' --exclude 'NOTES*' --exclude 'README*' --exclude indent.pro --exclude-dir corpora -o -h *|sort|uniq>/tmp/b
comm -23 <(sort /tmp/a) /tmp/b >/tmp/c
grep -v -E '(LHASH_OF|STACK_OF)' /tmp/c > /tmp/d
grep -v -Ff /tmp/d util/indent.pro > util/indent.pro

Manually adjusted to retain time_t and the ossl_*intmax_t types.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2797)

Remove some unused PEM structures

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2797)

Rename the test_stack recipe file name to be consistent with the rest of the
tests.

[skip ci]

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2964)

Fixed a crash in print_notice.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2935)

Remove dead code

tls1_get_curvelist() does not read from its third parameter, so
the assignments prior to function call were dead code and can be removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2952)

Tighten up client status_request processing

Instead of making a positive comparison against the invalid value
that our server would send, make a negative check against the only
value that is not an error.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2953)

Forgotten 'make update'

Reviewed-by: Rich Salz <rsalz@openssl.org>

VMS: turning off CALL_DEBUG isn't possible on Alpha

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2962)

Add EC_KEY_get0_engine()

Just as for DH, DSA and RSA, this gives the engine associated with the
key.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2960)

Rewrite the documentation for sk_TYPE_find() and sk_TYPE_find_ex() to better
describe the vagaries in their behaviour.

[skip ci]

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2958)

Unit tests for crypto/stack.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2924)

Fix a hang in tests that use sessionfile

The logic for testing whether the sessionfile has been created or not
was faulty and could result in race conditions. If you "lose" the tests
hang waiting for a session file that's never going to arrive.

Fixes #2950

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2955)

NOTES.WIN: mention Strawberry Perl as option.

Reviewed-by: Rich Salz <rsalz@openssl.org>

test/recipes/03-test_internal_*: call setup() first.

Strawberry Perl bailed out running test\run_tests.pl insisting on
setup() being called explicitly.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Clear alpn_selected_len for clients, too

Zero out the length alongside the NULLing of the pointer, to
bring parity between the selected and proposed fields..

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2954)

VMS: don't use /DSF, turn off CALL_DEBUG instead

It turns out that /DSF didn't do any good for our purposes.  Instead,
remove the CALL_DEBUG flag from any image we link.  This ensures that
we can have debugging information in the image files, but don't
automatically end up in a debugging session upon image activation.

Unfortunately, this means the CALL_DEBUG must be turned on when there
is a need to run with the debugger activated, and to turn it off when
done.  This has been documented in NOTES.VMS.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2957)

Add Python Cryptography.io external test suite

Add python cryptography testing instructions too

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2885)

Add additional RSA-PSS and RSA-OAEP tests.

Import test data from:
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-1/pkcs-1v2-1-vec.zip

This is a set of RSA-PSS and RSA-OAEP test vectors including some edge cases
with unusual key sizes.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2944)

Re-enable some BoringSSL tests

The previous 2 commits fixed some issues in the Boring tests. This
re-enables those tests.

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2942)

SSL_get_peer_cert_chain() does not work after a resumption

After a resumption it is documented that SSL_get_peer_cert_chain() will
return NULL. In BoringSSL it still returns the chain. We don't support that
so we should update the shim to call SSL_get_peer_certificate() instead
when checking whether a peer certificate is available.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2942)

Ensure we set the session id context in ossl_shim

OpenSSL requires that we set the session id context. BoringSSL apparently
does not require this, so wasn't setting it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2942)

De-obfuscate

No need to break out of the loop and repeat the loop termination
condition when we can just return.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2949)

VMS: throw away [.util]shareable_image_wrap.c.in and add replacement scripts

[.util]shareable_image_wrap.c.in was never useful because lib$spawn()
insisted on combining stdout and stderr into one.

Instead, we introduce two scripts that create and destroy a temporary
environment where the local shareable images become available,
[.util]local_shlib.com and [.util]unlocal_shlib.com.  They also define
DBG$IMAGE_DSF_PATH, which is require so the debugger can find the Debug
Symbol Files.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2947)

VMS: Change debug linking method to generate a separate Debug Symbol File

That makes it possible to run images without automagically ending up
in a debug session, while still being able to debug when required.

All .DSF files must reside in the same directory to be useful.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2947)

.travis.yml: make git submodule update conditional.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Add test for -nameout output

Using a cert with Cyrillic characters, kindly supplied by Dmitry Belyavsky

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2943)

Update master Travis to Trusty

This gets us a newer Clang, and newer Go.
1.1.0 already runs on Trusty without issues.

To do this, we need to disable afalgeng in the -Werror build.

afalgeng isn't compatible with the -Werror build on
Travis Trusty due to kernel header mismatch.

(See also 97043e46aa7083c787a1efd72ac31ca97ed41610)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix a -Wsign-compare warning

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2940)

Fix some -Wshadow warnings

Found using various (old-ish) versions of gcc.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2940)

Rather use -out parameter than redirect stdout

On some platforms, setting stdout to binary mode isn't quite enough,
which makes the result unusable.  With -out, we have better control.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2939)

Fix 12 Boring tests involving NULL-SHA ciphersuites

The Boring runner attempts to enable the NULL-SHA ciphersuite using the
cipherstring "DEFAULT:NULL-SHA". However in OpenSSL DEFAULT permanently
switches off NULL ciphersuites, so we fix this up to be "ALL:NULL-SHA"
instead. We can't change the runner so we have to change the shim to
detect this.

(Merged from https://github.com/openssl/openssl/pull/2933)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Port remaining old DTLS tests

We already test DTLS protocol versions. For good measure, add some
DTLS tests with client auth to the new test framework, so that we can
remove the old tests without losing coverage.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Port SRP tests to the new test framework

Also add negative tests for password mismatch.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update ossl_config.json for later BoringSSL commit

Update the list of suppressions so that we can run a later BoringSSL set
of tests. This also adds an ErrorMap to greatly reduce the number of
failing tests. The remaining tests that still fail are just disabled for
now.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2930)

Make the Boring tests pass

The boring tests are currently failing because they send a PSK extension
which isn't in the last place. This is not allowed in the latest TLS1.3
specs. However the Boring tests we have are based on an old commit that
pre-date when that rule first appeared.

The proper solution is to update the tests to a later commit. But for now
to get travis to go green we disable the failing tests.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2928)

Add the presence of ARIA to the change log.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2926)

Added a test case for RSA_padding_add_PKCS1_PSS_mgf1.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2801)

Fix a crash or unbounded allocation in RSA_padding_add_PKCS1_PSS_mgf1
and RSA_verify_PKCS1_PSS_mgf1 with 512-bit RSA vs. sha-512.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2801)

Better way to recognise mingw64 in config script

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2922)

poly1305/asm/poly1305-x86_64.pl: add poly1305_blocks_vpmadd52_4x.

As hinted by its name new subroutine processes 4 input blocks in
parallel. It still operates on 256-bit registers and is just
another step toward full-blown AVX512IFMA procedure.

Reviewed-by: Rich Salz <rsalz@openssl.org>

poly1305/asm/poly1305-armv8.pl: ilp32-specific poly1305_init fix.

Reviewed-by: Rich Salz <rsalz@openssl.org>

crypto/x86*cpuid.pl: move extended feature detection.

Exteneded feature flags were not pulled on AMD processors, as result
a number of extensions were effectively masked on Ryzen. Original fix
for x86_64cpuid.pl addressed this problem, but messed up processor
vendor detection. This fix moves extended feature detection past
basic feature detection where it belongs. 32-bit counterpart is
harmonized too.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Document in CHANGES that config now recognises 64-bit mingw

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2917)

Recognise mingw64 in config script

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2914)

Fix some doc nits

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2909)

Fix out-of-memory condition in conf

conf has the ability to expand variables in config files. Repeatedly doing
this can lead to an exponential increase in the amount of memory required.
This places a limit on the length of a value that can result from an
expansion.

Credit to OSS-Fuzz for finding this problem.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2894)

Handle find-doc-nits script rename

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix many doc L<> errors

Add 2017 copyright year
Add missing typedef to NAME
Remove ec(7) and bn(7) doc links
Remove .pod link errors, bogus links, make a few typo corrections
Fix some typo's in links and some missing items.
Don't link to C runtime functions (See OPENSSL_malloc for example/precedent)
Document ASN1_tag2str(), add a few typedef's that were missing from NAME
Update doc-nits target; addresses
    https://github.com/openssl/openssl/pull/1900#issuecomment-259943891,
Merge check-doc-links into find-doc-nits; if run regularly, would have found
    https://github.com/openssl/openssl/pull/2825

Reviewed-by: Richard Levitte <levitte@openssl.org>
    (Merged from https://github.com/openssl/openssl/pull/2862)

UI docs: Rephrase the UI method function return value description

It seems the =item isn't supposed to have pure numbers, or so tells me
perldoc.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2906)

Fix UI_get0_action_string()

It shouldn't try to return an action description for UIT_PROMPT type
UI strings.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2904)

Document UI_METHOD and UI_STRING, both useful for UI_METHOD creators

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2903)

Use the callbacks from the SSL object instead of the SSL_CTX object

... in functions dealing with the SSL object rather than the context.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2870)

Encourage having external tests in multiple test recipes

This will make the individual external tests more easily selectable /
deselectable through the usual test selection mechanism.

This also moves external tests to group 95.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2902)

Avoid questionable use of the value of a pointer

that refers to space
deallocated by a call to the free function in tls_decrypt_ticket.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2897)
(cherry picked from commit 13ed1afa923f4ffb553e389de08f26e9ce84e8a2)

Split test/recipes/03_test_internal.t into individual tests

This allows a finer granularity when selecting which tests to run, and
makes the tests more vidible.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2901)

Document how to select / deselect test group numbers

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2892)

Add HelloRetryRequest text to s_client/s_server

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2900)

Fix some RSA documentation

RSA_private_encrypt(), RSA_public_decrypt(), RSA_public_encrypt() and
RSA_private_decrypt() are declared with a "const" from parameter, but
this is not reflected in the docs.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2899)

Use the new TLSv1.3 certificate_required alert where appropriate

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2898)

Add a test to check that if a PSK extension is not last then we fail

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2896)

Check that the PSK extension is last

We need to check that the PSK extension in a ClientHello is the last one.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2896)

Fixup previous merge.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2703)

Make it possible to select or deselect test groups by number

Examples of possible expressions (adapt to your platform):

    make test TESTS=-99
    make test TESTS=10
    make test TESTS=-9?
    make test TESTS=-[89]0
    make test TESTS=[89]0

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2887)

Make the output of enc -ciphers identical even if run several times in a session.

This amounts to moving the column counter so it isn't a function local static variable and reinitialising it each time.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2884)

Exit the loop on failure

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2805)

Add some TLS13 values to s_client/s_server

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2882)

Limit the output of the enc -ciphers command to just the ciphers enc can
process.  This means no AEAD ciphers and no XTS mode.

Update the test script that uses this output to test cipher suites to not
filter out the now missing cipher modes.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2876)

this change will prevent undefined behavior when src and dst are equal (memcpy), effectively allowing setting length only in both functions.

CLA: trivial

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2750)

Fix no-comp

The value of SSL3_RT_MAX_ENCRYPTED_LENGTH normally includes the compression
overhead (even if no compression is negotiated for a connection). Except in
a build where no-comp is used the value of SSL3_RT_MAX_ENCRYPTED_LENGTH does
not include the compression overhead.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2872)

Fix the number of tests to skip if TLSv1.3 is disabled

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2875)

Add a test for records not on the record boundary

Test that we check that key change messages appear on a record boundary.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2875)

Check TLSv1.3 ServerHello, Finished and KeyUpdates are on record boundary

In TLSv1.3 the above messages signal a key change. The spec requires that
the end of these messages must align with a record boundary. We can detect
this by checking for decrypted but as yet unread record data sitting in
OpenSSL buffers at the point where we process the messages.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2875)

Provide a function to test whether we have unread records pending

Also updates SSL_has_pending() to use it. This actually fixes a bug in
SSL_has_pending() which is supposed to return 1 if we have any processed
or unprocessed data sitting in OpenSSL buffers. However it failed to return
1 if we had processed non-application data pending.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2875)

Remove doc reference to non-existant GCM example

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2866)

Get pointer type right in BIO_ssl_shutdown()

Also, restore 1.0.2 behavior of looping over all BIO's in the chain.
Thanks to Joseph Bester for finding this and suggesting a fix to the
crash.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2651)

crypto/x86_64cpuid.pl: move extended feature detection upwards.

Exteneded feature flags were not pulled on AMD processors, as result a
number of extensions were effectively masked on Ryzen. It should have
been reported for Excavator since it implements AVX2 extension, but
apparently nobody noticed or cared...

Reviewed-by: Rich Salz <rsalz@openssl.org>

test: add chacha_internal_test.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Increase the password buffer size to APP_PASS_LEN.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2868)

Unix Makefile: Have manual generation use the same perl script as Windows and VMS

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2863)

util/process_docs.pl: make it possible to add a suffix to man docs

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2863)

Add a test to check that we correctly handle record overflows

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2861)