Fix a DTLS memory leak

Fixes #7428

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7431)

sha/asm/keccak1600-armv8.pl: halve the size of hw-assisted subroutine.

Yes, it's second halving, i.e. it's now 1/4 of original size, or more
specifically inner loop. The challenge with Keccak is that you need
more temporary registers than there are available. By reversing the
order in which columns are assigned in Chi, it's possible to use
three of A[][] registers as temporary prior their assigment.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7294)

Configurations/15-android.conf: add support for "standalone toolchain".

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7400)

arch/async_posix.h: improve portability.

{make|swap|get|set}context are removed in POSIX.1-2008, but glibc
apparently keeps providing it.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7420)

Fix tls_cbc_digest_record is slow using SHA-384 and short messages

The formula used for this is now

kVarianceBlocks = ((255 + 1 + md_size + md_block_size - 1) / md_block_size) + 1

Notice that md_block_size=64 for SHA256, which results on the
magic constant kVarianceBlocks = 6.
However, md_block_size=128 for SHA384 leading to kVarianceBlocks = 4.

CLA:trivial

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7342)

Apply self-imposed path length also to root CAs

Also, some readers of the code find starting the count at 1 for EE
cert confusing (since RFC5280 counts only non-self-issued intermediate
CAs, but we also counted the leaf).  Therefore, never count the EE
cert, and adjust the path length comparison accordinly.  This may
be more clear to the reader.

Reviewed-by: Matt Caswell <matt@openssl.org>

Only CA certificates can be self-issued

At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and
top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph
of above https://tools.ietf.org/html/rfc5280#section-3.3), we see:

   This specification covers two classes of certificates: CA
   certificates and end entity certificates.  CA certificates may be
   further divided into three classes: cross-certificates, self-issued
   certificates, and self-signed certificates.  Cross-certificates are
   CA certificates in which the issuer and subject are different
   entities.  Cross-certificates describe a trust relationship between
   the two CAs.  Self-issued certificates are CA certificates in which
   the issuer and subject are the same entity.  Self-issued certificates
   are generated to support changes in policy or operations.  Self-
   signed certificates are self-issued certificates where the digital
   signature may be verified by the public key bound into the
   certificate.  Self-signed certificates are used to convey a public
   key for use to begin certification paths.  End entity certificates
   are issued to subjects that are not authorized to issue certificates.

that the term "self-issued" is only applicable to CAs, not end-entity
certificates.  In https://tools.ietf.org/html/rfc5280#section-4.2.1.9
the description of path length constraints says:

   The pathLenConstraint field is meaningful only if the cA boolean is
   asserted and the key usage extension, if present, asserts the
   keyCertSign bit (Section 4.2.1.3).  In this case, it gives the
   maximum number of non-self-issued intermediate certificates that may
   follow this certificate in a valid certification path.  (Note: The
   last certificate in the certification path is not an intermediate
   certificate, and is not included in this limit.  Usually, the last
   certificate is an end entity certificate, but it can be a CA
   certificate.)

This makes it clear that exclusion of self-issued certificates from
the path length count applies only to some *intermediate* CA
certificates.  A leaf certificate whether it has identical issuer
and subject or whether it is a CA or not is never part of the
intermediate certificate count.  The handling of all leaf certificates
must be the same, in the case of our code to post-increment the
path count by 1, so that we ultimately reach a non-self-issued
intermediate it will be the first one (not zeroth) in the chain
of intermediates.

Reviewed-by: Matt Caswell <matt@openssl.org>

s390x assembly pack: add OPENSSL_s390xcap man page.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6813)

s390x assembly pack: add OPENSSL_s390xcap environment variable.

The OPENSSL_s390xcap environment variable is used to set bits in the s390x
capability vector to zero. This simplifies testing of different code paths.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6813)

Deprecate ECDH_KDF_X9_62()

Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)

EVP module documentation pass

Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63()

Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)

Fix: 'openssl ca' command crashes when used with 'rand_serial' option

Commit ffb46830e2df introduced the 'rand_serial' option. When it is used,
the 'serialfile' does not get initialized, i.e. it remains a NULL pointer.
This causes a crash when the NULL pointer is passed to the rotate_serial()
call.

This commit fixes the crash and unifies the pointer checking before
calling the rotate_serial() and save_serial() commands.

Fixes #7412

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7417)

Build file templates: look at *all* defines

When looking at configured macro definitions, we must look at both
what comes from the config target AND what comes from user
configuration.

Fixes #7396

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7402)

Add a missing check on s->s3->tmp.pkey

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7405)

print() is a function in Python 3

CLA: trivial

Discovered via #7410 @ https://travis-ci.org/openssl/openssl/jobs/442003489#L440

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7403)

DRBG: fix reseeding via RAND_add()/RAND_seed() with large input

In pull request #4328 the seeding of the DRBG via RAND_add()/RAND_seed()
was implemented by buffering the data in a random pool where it is
picked up later by the rand_drbg_get_entropy() callback. This buffer
was limited to the size of 4096 bytes.

When a larger input was added via RAND_add() or RAND_seed() to the DRBG,
the reseeding failed, but the error returned by the DRBG was ignored
by the two calling functions, which both don't return an error code.
As a consequence, the data provided by the application was effectively
ignored.

This commit fixes the problem by a more efficient implementation which
does not copy the data in memory and by raising the buffer the size limit
to INT32_MAX (2 gigabytes). This is less than the NIST limit of 2^35 bits
but it was chosen intentionally to avoid platform dependent problems
like integer sizes and/or signed/unsigned conversion.

Additionally, the DRBG is now less permissive on errors: In addition to
pushing a message to the openssl error stack, it enters the error state,
which forces a reinstantiation on next call.

Thanks go to Dr. Falko Strenzke for reporting this issue to the
openssl-security mailing list. After internal discussion the issue
has been categorized as not being security relevant, because the DRBG
reseeds automatically and is fully functional even without additional
randomness provided by the application.

Fixes #7381

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7382)

Fix copy&paste error found in Coverity scan

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7377)

rsa/rsa_ossl.c: fix and extend commentary [skip ci].

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7123)

ssl/s3_enc.c: fix logical errors in ssl3_final_finish_mac.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7085)

sha/asm/keccak1600-s390x.pl: resolve -march=z900 portability issue.

Negative displacement in memory references was not originally specified,
so that for maximum coverage one should abstain from it, just like with
any other extension. [Unless it's guarded by run-time switch, but there
is no switch in keccak1600-s390x.]

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7239)

Fix a typo in a macro

Fixes #7385

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7385)

Safer memory cleanup in (crypto/rsa/rsa_lib.c)

We don't need to use secure clean for public key.

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7363)

Fix compiling warnings in example code

The example code in EVP_DigestInit.pod generates warnings if users try
to compile it.

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7362)

crypto/rand: fix some style nit's

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7378)

rand_unix.c: fix --with-rand-seed=none build

Fixes a compiler warning about an unused syscall_random()
and cleans up the OPENSSL_RAND_SEED preprocessor logic.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/779)

Fix no-engine

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7365)

mkdef: bsd-gcc uses solaris symbol version scripts

As for linux, make bsd-gcc an alias to the solaris semantics for
shared library symbol version handling.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7376)

Fix a nit of copyright date range

Should be 2018 instead of 20018.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7364)

apps: allow empty attribute values with -subj

Historically (i.e., OpenSSL 1.0.x), the openssl applications would
allow for empty subject attributes to be passed via the -subj argument,
e.g., `opensl req -subj '/CN=joe/O=/OU=local' ...`.  Commit
db4c08f0194d58c6192f0d8311bf3f20e251cf4f applied a badly needed rewrite
to the parse_name() helper function that parses these strings, but
in the process dropped a check that would skip attributes with no
associated value.  As a result, such strings are now treated as
hard errors and the operation fails.

Restore the check to skip empty attribute values and restore
the historical behavior.

Document the behavior for empty subject attribute values in the
corresponding applications' manual pages.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7349)

Cleanup typos and grammar in DES_random_key.pod

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7356)

Indentation fixes.

The PR #7329 left some indentation slightly off.  This fixes it.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7360)

Remove useless check.
Hash can be longer than EC group degree and it will be truncated.

CLA: trivial

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7329)

/dev/crypto engine: give CIOCFSESSION the actual sess-id

We passed that ioctl a pointer to the whole session_op structure,
which wasn't quite right.

Notified by David Legault.

Fixes #7302

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7304)

test/secmemtest: test secure memory only if it is implemented

Fixes #7322

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7351)

util/mkdef.pl: for VMS, allow generation of case insensitive symbol vector

Some modules are built with case insensitive (uppercase) symbols on
VMS.  This needs to be reflected in the export symbol vector.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7347)

Configure: use correct variable to infer the .ld file location

We didn't notice the error because it all happened in the top directory.
Now that we use .ld files in subdirectories, the bug became apparent.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7347)

Add build file support for generic symbol exports with DSOs

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7347)

Change the build of engines to use ordinal files for symbol export

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7347)

util/mkdef.pl: Produce version scripts from unversioned symbols

This allows setting up export maps for DSOs as well in a uniform way.
This also means that util/mkdef.pl no longer picks up the target
version from configdata.pm, and it has to be given on the command line
instead.  This may be used to give modules separate versions as well,
if desirable.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7347)

Extend the BIO callback tests to check the return value semantics

Check that different return values passed to the BIO callback are
correctly handled.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7344)

Fix the BIO callback return code handling

The BIO callback handling incorrectly wrote over the return code passed
to the callback, meaning that an incorrect result was (eventually) returned
to the caller.

Fixes #7343

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7344)

Refactor util/mknum.pl for clearer separation of functionality

Rewrite util/mknum.pl to become cleaner, and to use the separate
generic C header parsing module, as well as the separate ordinals
manipulation module.
Adapt the build files.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)

Add code to manipulate the items in OpenSSL::Ordinals

This means adding the capability to add new items, to invalidate and
revalidate all the items, and to update the file it came from, as well
as the possibility to create new items from other data than a line
from said file.

While we're at it, we throw in a couple of useful filters.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)

A perl module to parse through C headers

OpenSSL::ParseC is a module that parses through a C header file and
returns a list with information on what it found.  Currently, the
information it returns covers function and variable declarations,
macro definitions, struct declarations/definitions and typedef
definitions.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)

Move ZLIB from 'platforms' to 'features'

Having it as a 'platform' was conceptually wrong from from the
beginning, and makes decoding more complicated than necessary.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)

Refactor util/mkdef.pl for clearer separation of functionality

Move the .num updating functionality to util/mknum.pl.
Rewrite util/mkdef.pl to create .def / .map / .opt files exclusively,
using the separate ordinals reading module.
Adapt the build files.
Adapt the symbol presence test.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)

Add a perl module that deals with ordinals files

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)

Remove SSL_version_str

I was never exported in our shared libraries and no one noticed, and
we don't seem to use it ourselves, so clean it away.

In all likelyhood, this is a remain from the 90's, when it was in
fashion to litter library modules with these kinds of strings.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7340)

Fix the drbgtest with randomized ordering

In drbgtest, test_set_defaults changes the default DRBGs. This works fine
when tests are run in the normal order. However if
OPENSSL_TEST_RAND_ORDER is defined then it may fail (dependent on the
ordering). This environment variable is defined for one of the Travis
tests, so this issue was causing intermittent travis test failures.

[extended tests]

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7338)

Ignore libcrypto.ld and libssl.ld

These are auto generated files that should not be checked into git

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7339)

Fix some Coverity warnings

Check some return values on some functions.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7335)

Fix a mem leak in the ocsp app

Free memory allocated in the parent process that is not needed in the
child. We also free it in the parent. Technically this isn't really
required since we end up calling exit() soon afterwards - but to
prevent false positives we free it anyway.

Fixes a Coverity issue.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7335)

Change DRBG's to DRBGs

Minor change to documentation of RAND_DRBG_set_defaults()

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7326)

'openssl list': add option -objects to list built in objects

Related to #6696

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6702)

Refactor linker script generation

The generation of linker scripts was badly balanced, as all sorts of
platform dependent stuff went into the top build.info, when that part
should really be made as simply and generic as possible.

Therefore, we move a lot of the "magic" to the build files templates,
since they are the place for platform dependent things.  What remains
is to parametrize just enough in the build.info file to generate the
linker scripts correctly for each associated library.

"linker script" is a term usually reserved for certain Unix linkers.
However, we only use them to say what symbols should be exported, so
we use the term loosely for all platforms.  The internal extension is
'.ld', and is changed by the build file templates as appropriate for
each target platform.

Note that this adds extra meaning to the value of the shared_target
attribute.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7333)

Clean out aliases in include/openssl/symhacks.h

Only a few clashing ones remain

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7331)

Small cleanup (util/mkdef.pl, crypto/bio/bss_log.c, include/openssl/ocsp.h)

BIO_s_log() is declared for everyone, so should return NULL when not
actually implemented.  Also, it had explicit platform limitations in
util/mkdef.pl that didn't correspond to what was actually in code.
While at it, a few other hard coded things that have lost their
relevance were removed.

include/openssl/ocsp.h had a few duplicate declarations.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7331)

Added DRBG_HMAC & DRBG_HASH + Added defaults for setting DRBG for master/public/private + renamed generate_counter back to reseed_counter + generated new cavs data tests

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6779)

Add missing cipher aliases to openssl(1)

And references to other manpages are also added in openssl(1).

Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7314)

doc/man3/SSL_set_bio.pod: Fix wrong function name in return values section

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7035)

Update enc(1) examples to more recent ciphers and key derivation algorithms

Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7248)

Fix no-tls1_2

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7308)

Fix no-psk

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7306)

Reduce stack usage in tls13_hkdf_expand

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7297)

Document OPENSSL_VERSION_TEXT macro

This commit documents the OPENSSL_VERSION_TEXT which is currently
missing in the man page.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7301)

Use secure_getenv(3) when available.

Change all calls to getenv() inside libcrypto to use a new wrapper function
that use secure_getenv() if available and an issetugid then getenv if not.

CPU processor override flags are unchanged.

Extra checks for OPENSSL_issetugid() have been removed in favour of the
safe getenv.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7047)

Create the .rnd file it it does not exist

It's a bit annoying, since some commands try to read a .rnd file,
and print an error message if the file does not exist.

But previously a .rnd file was created on exit, and that does no longer
happen.

Fixed by continuing in app_RAND_load_conf regardless of the error in
RAND_load_file.

If the random number generator is still not initalized on exit, the
function RAND_write_file will fail and no .rnd file would be created.

Remove RANDFILE from openssl.cnf

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7217)

typo-fixes: miscellaneous typo fixes

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7277)

Fix the max psk len for TLSv1.3

If using an old style TLSv1.2 PSK callback then the maximum possible PSK
len is PSK_MAX_PSK_LEN (256) - not 64.

Fixes #7261

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7267)

Add a test for the certificate callback

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7257)

Delay setting the sig algs until after the cert_cb has been called

Otherwise the sig algs are reset if SSL_set_SSL_CTX() gets called.

Fixes #7244

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7257)

crypto/bn/asm/x86_64-gcc.c: remove unnecessary redefinition of BN_ULONG

This module includes bn.h via other headers, so it picks up the
definition from there and doesn't need to define them locally (any
more?).  Worst case scenario, the redefinition may be different and
cause all sorts of compile errors.

Fixes #7227

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7287)

/dev/crypto engine: add missing RC4 parameter

Fixes #7280

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7281)

Add some missing ciphers in 'enc' document

The original issue is #7273 and this commit fixes part of that issue.

[skip ci]

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7275)

util/mkdef.pl, util/add-depends.pl: don't lowercase file names

It turns out to be detrimental on some file systems that may or may not
be case sensitive (such as NTFS, which has a case sensitive mode).

Fixes #7172

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7172)

crypto/ui/ui_openssl.c: make sure to recognise ENXIO and EIO too

These both indicate that the file descriptor we're trying to use as a
terminal isn't, in fact, a terminal.

Fixes #7271

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7272)

Reset TLS 1.3 ciphers in SSL_CTX_set_ssl_version()

Historically SSL_CTX_set_ssl_version() has reset the cipher list
to the default.  Splitting TLS 1.3 ciphers to be tracked separately
caused a behavior change, in that TLS 1.3 cipher configuration was
preserved across calls to SSL_CTX_set_ssl_version().  To restore commensurate
behavior with the historical behavior, set the ciphersuites to the default as
well as setting the cipher list to the default.

Closes: #7226

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7270)

Add a GMAC demonstration program.

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7249)

ssl/ssl_ciph.c: make set_ciphersuites static

Fixes #7252

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7253)

Trivial test improvements

This commit reuses a variable instead of reevaluating the expression
and updates an outdated comment in the EVP test.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7242)

Fixed typos in hkdf documentation.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7236)

Add missing include file.
Specifically, include e_os.h to pick up alloca definition for WIN32.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7234)

Add a compile time test to verify that openssl/rsa.h and complex.h can
coexist.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)

Use 'i' as parameter name not 'I'.

The latter causes problems when complex.h is #included.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)

Update RAND_DRBG.pod

Fixed a minor typo while reading the documentation.
I agree that this contribution is trivial can be freely used.

CLA: trivial

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7221)

Improve SSL_shutdown() documentation

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
GH: #7188

VMS: only use the high precision on VMS v8.4 and up

It simply isn't available on older versions.

Issue submitted by Mark Daniels

Fixes #7229

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7230)

(cherry picked from commit d6d6aa3521e207c2727bbd1e5c97772502d15739)

VMS libtestutil: look for lower case "main"

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7208)

VMS: turn on name mangling for all our programs

With the change to have separate object files by intent, VMS name
mangling gets done differently.  While we previously had that for
libraries only, we must now turn that on generally for our programs,
because some of them depend in internal libraries where mangled names
are all that there is.

Dynamic modules are still built with non-mangled names, which is good
enough to show that it's possible to build with our public libraries
using our public headers.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7208)

VMS build: fix a misspelled 'bin_cflags' and a wrongly coded 'NO_INST_'

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7208)

Make some return checks consistent with others

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7209)

Don't allow -early_data with other options where it doesn't work

-early_data is not compatible with -www, -WWW, -HTTP or -rev.

Fixes #7200

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7206)

Add an explicit cast to time_t

Caused a compilation failure in some environments

Fixes #7204

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7205)

Update the documentation on libobj2shlib / obj2shlib

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7198)

VMS: stop trying to build shared libraries from static ones

The possibility to do this was killed when we started producing object
file names with encoded intention (and possibly different builds), and
leads to build errors.

With that, 'libobj2shlib' is renamed to 'obj2shlib' to reflect this
design change.  The old name is still used if the new one isn't
available, for the sake of backward compatibility.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7198)

Replace the public RAND_DRBG_USED_FLAGS #define by an internal constant

The new DRBG API added the aforementioned #define. However, it is
used internally only and having it defined publicly does not serve
any purpose except causing potential version compatibility problems.

Fixes #7182

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7190)

Fix a possible recursion in SSLfatal handling

Fixes: #7161 (hopefully)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7175)

Update README.md

Fixes a minor typo that would cause the linker to complain about not finding -lFuzzer

CLA: trivial

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7197)

minor fixes for Windows

- fix to use secure URL in generated Windows resources
- fix a potentially uninitialized variable
- fix an unused variable warning

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7189)

crypto/sm2/sm2_sign.c: ensure UINT16_MAX is properly defined

Fixes #7186

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7193)