oweals/u-boot.git
12 years agoMinor Coding Style Cleanup.
Wolfgang Denk [Sun, 22 Jul 2012 19:58:26 +0000 (21:58 +0200)]
Minor Coding Style Cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoBC3450 board: Remove unused CONFIG_SYS_CPU definition
Wolfgang Denk [Sun, 22 Jul 2012 07:58:47 +0000 (09:58 +0200)]
BC3450 board: Remove unused CONFIG_SYS_CPU definition

This fixes:
cmd_bc3450.c:55:0: warning: "CONFIG_SYS_CPU" redefined [enabled by default]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
12 years agoBC3450 board: change debug code to using debug()
Wolfgang Denk [Sun, 22 Jul 2012 07:56:06 +0000 (09:56 +0200)]
BC3450 board: change debug code to using debug()

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sat, 21 Jul 2012 22:10:39 +0000 (00:10 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM1136: Fix cache range checks
  mx6: Make pad name macro consistent with the datasheet
  mx28: Fix elftosb source link in README.mx28_common
  doc: README.mx28_common: Add missing entry into Contents

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoMPC83xx, MPC85xx: compile stub cache function
Stefano Babic [Thu, 19 Jul 2012 23:00:02 +0000 (23:00 +0000)]
MPC83xx, MPC85xx: compile stub cache function

An empty flush_dcache_range() was added into MPC83xx and MPC85xx to
work with drivers shared with other architecture.  However, it is
compiled only if USB is set, but it is required for other drivers
(FSL_ESDHC), too.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Andy Fleming <afleming@gmail.com>
CC: Dirk Behme <dirk.behme@de.bosch.com>
CC: Marek Vasut <marex@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Added MPC83xx version.

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoARM1136: Fix cache range checks
Benoît Thébaudeau [Thu, 19 Jul 2012 01:35:32 +0000 (01:35 +0000)]
ARM1136: Fix cache range checks

bad_cache_range actually returned true if the range was OK, but it was used
according to its name, which resulted in all valid dcache range invalidate/flush
operations being dropped. Hence, most DMA transfers resulted in garbage data.

This patch renames this function according to what it does, and it fixes the
interpretation of its return value by other functions. The chosen naming is the
same as for ARM926EJ-S in order to be consistent.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agomx6: Make pad name macro consistent with the datasheet
Ashok [Fri, 15 Jun 2012 03:48:57 +0000 (03:48 +0000)]
mx6: Make pad name macro consistent with the datasheet

Use the same name as defined in the datasheet.
DSP_CLK -> DISP_CLK

Signed-off-by: Ashok Kumar Reddy Kourla <ashokkourla2000@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
12 years agomx28: Fix elftosb source link in README.mx28_common
Anatolij Gustschin [Wed, 27 Jun 2012 04:14:29 +0000 (04:14 +0000)]
mx28: Fix elftosb source link in README.mx28_common

The documented link to elftosb package tarball is not accessible,
change to another working link.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
12 years agodoc: README.mx28_common: Add missing entry into Contents
Fabio Estevam [Mon, 18 Jun 2012 05:51:49 +0000 (05:51 +0000)]
doc: README.mx28_common: Add missing entry into Contents

commit 419ea2d84 (mx28: Split the README into a common part and a m28 specific part)
missed an entry in the Contents section that was part of the original file.

Add the missing entry for completeness.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Fri, 20 Jul 2012 20:38:32 +0000 (22:38 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency
  ARM: OMAP4: PANDA: Add rest of the USB module pads to essentials
  arm: armv7: add compile option -mno-unaligned-access if available
  arm: Fix to mistake clean the memory space

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-nds32
Wolfgang Denk [Fri, 20 Jul 2012 20:35:13 +0000 (22:35 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-nds32

* 'master' of git://git.denx.de/u-boot-nds32:
  nds32: split common cache access from cpu into lib

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agocommon.h: Remove include compiler.h
Marek Vasut [Fri, 20 Jul 2012 10:12:58 +0000 (10:12 +0000)]
common.h: Remove include compiler.h

Remove this as including it on global scale breaks a lot of things.
This was reported by:
Matthew McClintock <B29882@freescale.com>

Fix found by:
Tom Rini <trini@ti.com>

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
12 years agonds32: split common cache access from cpu into lib
Macpaul Lin [Sun, 15 Jul 2012 03:54:13 +0000 (11:54 +0800)]
nds32: split common cache access from cpu into lib

This commit does the following updates.
1. Split the common cache access from cpu.c into lib folder.
2. Rename the following cache api to adapt common.h
 - dcache_flush_rang -> flush_dcache_rang
 - icache_inval_range -> invalidate_icache_range
3. Add invalidate_dcache_range

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
12 years agoARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency
Fabio Estevam [Thu, 1 Mar 2012 04:02:38 +0000 (04:02 +0000)]
ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency

Create a weak-aliased arch_cpu_init, so that we can get rid of CONFIG_ARCH_CPU_INIT
and always call arch_cpu_init.

This way we do not need to define CONFIG_ARCH_CPU_INIT in every board file, since
arch_cpu_init() is supposed to handle common CPU level code.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agoARM: OMAP4: PANDA: Add rest of the USB module pads to essentials
SRICHARAN R [Wed, 18 Jul 2012 21:54:47 +0000 (14:54 -0700)]
ARM: OMAP4: PANDA: Add rest of the USB module pads to essentials

In commit 1a89a217f5c5ab3645c80c1247e8911a8b5ad491 we moved most of the
required pads and mux data for USB to the essential list so that later
on we could NOT enable anything that wasn't essential unless otherwise
configured.  This was however missing a few pandaboard-specific parts
which left for example USB ethernet non-functional.

Tested this on OMAP4430 ES2.2, OMAP4460 ES1.1 PANDA boards.

(Reworded by Tom Rini to be more precise about what the problem was)

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Tested-by: Tom Rini <trini@ti.com>
12 years agoarm: armv7: add compile option -mno-unaligned-access if available
Tetsuyuki Kobayashi [Sun, 1 Jul 2012 23:42:10 +0000 (23:42 +0000)]
arm: armv7: add compile option -mno-unaligned-access if available

Recent compiler generates unaligned memory access in armv7 default.
But current U-Boot does not allow unaligned memory access, so it causes
data abort exception.
This patch add compile option "-mno-unaligned-access" if it is available.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Tested-by: Gary Thomas <gary@mlbassoc.com>
12 years agoarm: Fix to mistake clean the memory space
Zhong Hongbo [Sat, 7 Jul 2012 03:24:33 +0000 (03:24 +0000)]
arm: Fix to mistake clean the memory space

In currently, when __bss_start is equal to __bss_end__,
The bss loop will clear all the things in memory space.

But just only when __bss_end__ greater than __bss_start__,
we do the clear bss section operation.

Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-usb
Wolfgang Denk [Fri, 20 Jul 2012 07:12:43 +0000 (09:12 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-usb

* 'master' of git://git.denx.de/u-boot-usb:
  usb_storage: fix ehci driver max transfer size
  smsc95xx: align buffers to cache line size
  ehci-hcd: change debug() to printf() in case of errors
  usb: check return value of submit_{control, bulk}_msg
  usb: pass cache-aligned buffer to usb_get_descriptor()
  ehci-hcd: fix external buffer cache handling
  ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
  ehci-hcd: program asynclistaddr before every transfer
  common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
  ehci-omap: Do not call dcache_off from omap_ehci_hcd_init

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoMerge branch 'sf' of git://git.denx.de/u-boot-blackfin
Wolfgang Denk [Fri, 20 Jul 2012 06:58:06 +0000 (08:58 +0200)]
Merge branch 'sf' of git://git.denx.de/u-boot-blackfin

* 'sf' of git://git.denx.de/u-boot-blackfin:
  sf: spansion: inline useless id defines
  sf: drop unused/duplicate command defines

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-net
Wolfgang Denk [Fri, 20 Jul 2012 06:55:38 +0000 (08:55 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-net

* 'master' of git://git.denx.de/u-boot-net:
  net: link_local: fix build
  net: bootp: fix build

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agotools: clean up mingw ifdefs
Mike Frysinger [Wed, 18 Jul 2012 16:59:45 +0000 (16:59 +0000)]
tools: clean up mingw ifdefs

We have a header file specifically for mingw cruft, so keep it there
to avoid crap spreading into the main tools.  This lets our devs just
worry about *nix systems.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12 years agosf: spansion: inline useless id defines
Mike Frysinger [Sun, 29 Jan 2012 00:32:18 +0000 (16:32 -0800)]
sf: spansion: inline useless id defines

No need for dedicated defines when these really only get used once.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12 years agosf: drop unused/duplicate command defines
Mike Frysinger [Sun, 29 Jan 2012 00:26:03 +0000 (16:26 -0800)]
sf: drop unused/duplicate command defines

In an effort to unify the spi flash drivers further, drop all the
unused and/or duplicate command defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12 years agonet: link_local: fix build
benoit.thebaudeau@advans [Thu, 19 Jul 2012 01:19:34 +0000 (01:19 +0000)]
net: link_local: fix build

Fix comment within comment build error.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
12 years agonet: bootp: fix build
benoit.thebaudeau@advans [Thu, 19 Jul 2012 01:23:21 +0000 (01:23 +0000)]
net: bootp: fix build

Fix NetSetState function name used with CONFIG_BOOTP_MAY_FAIL.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
12 years agoBlackfin: bfin_mac: drop volatile markings on packet buffers
Mike Frysinger [Thu, 19 Jul 2012 04:08:47 +0000 (00:08 -0400)]
Blackfin: bfin_mac: drop volatile markings on packet buffers

Now that common code doesn't declare these as volatile, we don't need to
either anymore.  This fixes the build warning:

bfin_mac.c: In function 'bfin_EMAC_recv':
bfin_mac.c:193:23: warning: assignment discards qualifiers from pointer target type

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12 years agousb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier [Mon, 9 Jul 2012 09:52:29 +0000 (09:52 +0000)]
usb_storage: fix ehci driver max transfer size

The commit 5dd95cf93dfffa1d19a1928990852aac9f55b9d9 'usb_storage:
Fix EHCI "out of buffer pointers" with CD-ROM' introduce a bug in
usb_storage as it wrongly assumes that every transfer can use
4096 bytes per qt_buffer. This is wrong if the start address of
the data is not page aligned to 4096 bytes and leads to 'EHCI
timed out on TD' messages because of 'out of buffer pointers'
in ehci_td_buffer function.

The bug appears during load of a fragmented file and
read from or write to an unaligned memory address.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
12 years agosmsc95xx: align buffers to cache line size
Ilya Yanok [Sun, 15 Jul 2012 04:43:53 +0000 (04:43 +0000)]
smsc95xx: align buffers to cache line size

Align buffers passed to the USB code to cache line size so
they can be DMAed safely.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agoehci-hcd: change debug() to printf() in case of errors
Ilya Yanok [Sun, 15 Jul 2012 04:43:52 +0000 (04:43 +0000)]
ehci-hcd: change debug() to printf() in case of errors

Printing message could be useful if something goes really wrong.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agousb: check return value of submit_{control, bulk}_msg
Ilya Yanok [Sun, 15 Jul 2012 04:43:51 +0000 (04:43 +0000)]
usb: check return value of submit_{control, bulk}_msg

Return values of submit_{control,bulk}_msg() functions
should be checked to detect possible error.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agousb: pass cache-aligned buffer to usb_get_descriptor()
Ilya Yanok [Sun, 15 Jul 2012 04:43:50 +0000 (04:43 +0000)]
usb: pass cache-aligned buffer to usb_get_descriptor()

usb_get_descriptor passes it's buffer argument directly to
usb_control_msg() so it has to be properly aligned/padded.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agoehci-hcd: fix external buffer cache handling
Ilya Yanok [Sun, 15 Jul 2012 04:43:49 +0000 (04:43 +0000)]
ehci-hcd: fix external buffer cache handling

Buffer coming from upper layers should be cacheline aligned/padded
to perform safe cache operations. For now we don't do bounce
buffering so getting unaligned buffer is an upper layer error.
We can't check if the buffer is properly padded with current
interface so just assume it is (consider changing with in the
future). The following changes are done:

1. Remove useless length alignment check. We get actual transfer
length not the size of the underlying buffer so it's perfectly
valid for it to be unaligned.
2. Move flush_dcache_range() out of while loop or it will
flush too much.
3. Don't try to fix buffer address before calling invalidate:
if it's unaligned it's an error anyway so let cache subsystem
cry about that.
4. Fix end buffer address to be cacheline aligned assuming upper
layer reserved enough space. This is potentially dangerous
operation so upper layers should be careful about that.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agoehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Tom Rini [Sun, 15 Jul 2012 22:14:24 +0000 (22:14 +0000)]
ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment

The USB spec says that 32 bytes is the minimum required alignment.
However on some platforms we have a larger minimum requirement for cache
coherency.  In those cases, use that value rather than the USB spec
minimum.  We add a cpp check to <usb.h> to define USB_DMA_MINALIGN and
make use of it in ehci-hcd.c and musb_core.h.  We cannot use MAX() here
as we are not allowed to have tests inside of align(...).

Signed-off-by: Tom Rini <trini@ti.com>
[marek.vasut]: introduce some crazy macro voodoo
Signed-off-by: Marek Vasut <marex@denx.de>
[ilya.yanok]: moved external buffer fixes to separate patch,
we use {ALLOC,DEFINE}_ALIGN_BUFFER macros with alignment of USB_DMA_MINALIGN
for qh_list, qh and qtd structures to make sure they are proper aligned
for both controller and cache operations.
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agoehci-hcd: program asynclistaddr before every transfer
Ilya Yanok [Sun, 15 Jul 2012 22:12:08 +0000 (22:12 +0000)]
ehci-hcd: program asynclistaddr before every transfer

Move or_asynclistaddr programming to ehci_submit_async()
function to make sure queue head is properly programmed
before every transfer. This solves the problem with changing
qh address.

Also remove unneeded qh_list->qh_link reprogramming at the
end of transfer.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agocommon.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Marek Vasut [Sun, 15 Jul 2012 04:43:47 +0000 (04:43 +0000)]
common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER

This is the out-of-function-scope counterpart of
ALLOC_CACHE_ALIGN_BUFFER.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
[ilya.yanok]: added missing <linux/compiler.h> include and
{DEFINE,ALLOC}_ALIGN_BUFFER macros allowing explicit alignment
specification.
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agoehci-omap: Do not call dcache_off from omap_ehci_hcd_init
Tom Rini [Sun, 15 Jul 2012 04:43:46 +0000 (04:43 +0000)]
ehci-omap: Do not call dcache_off from omap_ehci_hcd_init

This has never been completely sufficient and now happens too late to
paper over the cache coherency problems with the current USB stack.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
12 years agoMerge branch 'next' of git://git.denx.de/u-boot-video
Wolfgang Denk [Wed, 18 Jul 2012 08:47:03 +0000 (10:47 +0200)]
Merge branch 'next' of git://git.denx.de/u-boot-video

* 'next' of git://git.denx.de/u-boot-video:
  ipu_common: Add ldb_clk for use in parenting the pixel clock
  ipu_common: Do not hardcode the ipu_clk frequency
  ipu_common: Rename MXC_CCM_BASE
  ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53
  ipu_common: Only apply the erratum to MX51
  video: Rename CONFIG_VIDEO_MX5
  mx6: Allow mx6 to access the IPUv3 registers
  common lcd: minor coding style changes

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-nios
Wolfgang Denk [Wed, 18 Jul 2012 06:58:43 +0000 (08:58 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-nios

* 'master' of git://git.denx.de/u-boot-nios:
  nios2: move gd and bd into BSS

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agonios2: move gd and bd into BSS
Thomas Chou [Mon, 23 Apr 2012 02:55:02 +0000 (10:55 +0800)]
nios2: move gd and bd into BSS

As suggested by Graeme Russ, move gd and bd data structrures
to BSS instead of calculating the locations around the stack
and heap.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Mike Frysinger <vapier@gentoo.org>
12 years agoFSL/eSDHC: enable the clock to detect the SD card
Jerry Huang [Thu, 17 May 2012 23:57:02 +0000 (23:57 +0000)]
FSL/eSDHC: enable the clock to detect the SD card

For FSL low-end processors (VVN2.2), in order to detect the SD card,
we should enable PEREN, HCKEN and IPGEN to enable the clock.
Otherwise, after booting the u-boot, and then inserting the SD card,
the SD card can't be detected.
For SDHC VVN2.3 IP, these bits are reserved, and SDCLKEN is used.
And when accessing to these reserved bit, no any impact happened.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Andy Fleming <afleming@gmail.com>
CC: Marek Vasut <marex@denx.de>
Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years agoSD/MMC: check the card status during erase operation
Jerry Huang [Thu, 17 May 2012 23:00:51 +0000 (23:00 +0000)]
SD/MMC: check the card status during erase operation

Use the function 'mmc_send_status' to check the card status.
only when the card is ready, driver can send the next erase command
to the card, otherwise, the erase will failed:
=> mmc erase 0 1
MMC erase: dev # 0, block # 0, count 1 ... 1 blocks erase: OK
=> mmc erase 0 2
MMC erase: dev # 0, block # 0, count 2 ... mmc erase failed
1 blocks erase: ERROR
=> mmc erase 0 4
MMC erase: dev # 0, block # 0, count 4 ... mmc erase failed
1 blocks erase: ERROR

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Andy Fleming <afleming@gmail.com>
CC: Marek Vasut <marex@denx.de>
Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years agommc:fix Call mmc_init() when executing mmc_get_dev()
Łukasz Majewski [Thu, 19 Apr 2012 02:39:18 +0000 (02:39 +0000)]
mmc:fix Call mmc_init() when executing mmc_get_dev()

This code adds call to mmc_init(), for partition related commands (e.g.
fatls, fatinfo etc.).

It is safe to call mmc_init() multiple times since mmc->has_init flag
prevents from multiple initialization.

The FAT related code calls get_dev high level method and then uses
elements from mmc->block_dev, which is uninitialized until the mmc_init
(and thereof mmc_startup) is called.

This problem appears on boards, which don't use mmc as the default
place for envs

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Andy Fleming <afleming@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years agommc: remove the hard setting for tran_speed
Jaehoon Chung [Mon, 26 Mar 2012 21:16:03 +0000 (21:16 +0000)]
mmc: remove the hard setting for tran_speed

mmc_set_clock is set to the hard-coding.
But i think good that use the tran_speed value.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years agoi.MX: fsl_esdhc: allow use with cache enabled.
Eric Nelson [Wed, 25 Apr 2012 14:28:48 +0000 (14:28 +0000)]
i.MX: fsl_esdhc: allow use with cache enabled.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-i2c
Wolfgang Denk [Thu, 12 Jul 2012 06:17:29 +0000 (08:17 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c

* 'master' of git://git.denx.de/u-boot-i2c:
  mx28evk: Add I2C support
  mxs-i2c: Fix internal address byte order
  mxc_i2c: remove setting speed at each start
  mx6qsabrelite: add i2c support
  mxc_i2c: specify i2c base address in config file

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agomx28evk: Add I2C support
Fabio Estevam [Mon, 7 May 2012 05:42:34 +0000 (05:42 +0000)]
mx28evk: Add I2C support

Add I2C support.

Tested by placing a 24LC16 EEPROM into the U50 slot which comes empty from factory.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
12 years agomxs-i2c: Fix internal address byte order
Torsten Fleischer [Tue, 17 Apr 2012 05:37:45 +0000 (05:37 +0000)]
mxs-i2c: Fix internal address byte order

Large EEPROMs, e.g. 24lc32, need 2 byte to address the internal memory.
These devices require that the high byte of the internal address has to be
written first.
The mxs_i2c driver currently writes the address' low byte first.

The following patch fixes the byte order of the internal address that should
be written to the I2C device.

Signed-off-by: Torsten Fleischer <to-fleischer@t-online.de>
CC: Marek Vasut <marex@denx.de>
CC: Stefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agomxc_i2c: remove setting speed at each start
Troy Kisky [Tue, 24 Apr 2012 17:33:27 +0000 (17:33 +0000)]
mxc_i2c: remove setting speed at each start

Other then being very weird, this code was also wrong.
For example, say I set speed to 100K. I'll read back the speed
as 85937. But the speed is really 85937.5, so we I reset
the speed to 85937, I'll get 73660.7. After a couple of transactions
my speed is now exactly 68750 so it will remain there.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agomx6qsabrelite: add i2c support
Troy Kisky [Tue, 24 Apr 2012 17:33:26 +0000 (17:33 +0000)]
mx6qsabrelite: add i2c support

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agomxc_i2c: specify i2c base address in config file
Troy Kisky [Tue, 24 Apr 2012 17:33:25 +0000 (17:33 +0000)]
mxc_i2c: specify i2c base address in config file

The following platforms had their config files changed
flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd
and mx53loco.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agonet: fix typo in arp clean up
Mike Frysinger [Tue, 10 Jul 2012 00:41:50 +0000 (00:41 +0000)]
net: fix typo in arp clean up

The clean up patch missed an &, so we end up passing an int rather than
a pointer to the sprintf function.

arp.c: In function 'ArpReceive':
arp.c:197: warning: format '%p' expects type 'void *', but argument 3 has type 'int'

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12 years agonet/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other
Nobuhiro Iwamatsu [Tue, 5 Jun 2012 16:39:06 +0000 (16:39 +0000)]
net/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other

When support sh7734 of sh-ether, ECSIPR_BRCRXIP and other were removed.
Therefore SH7757 and SH7724 can not build. This revise this probelem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
12 years agoipu_common: Add ldb_clk for use in parenting the pixel clock
Eric Nelson [Thu, 31 May 2012 07:24:02 +0000 (07:24 +0000)]
ipu_common: Add ldb_clk for use in parenting the pixel clock

Add ldb_clk for use in parenting the pixel clock.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agoipu_common: Do not hardcode the ipu_clk frequency
Fabio Estevam [Thu, 31 May 2012 07:24:00 +0000 (07:24 +0000)]
ipu_common: Do not hardcode the ipu_clk frequency

Do not hardcode the ipu_clk frequency and let the board file pass this value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agoipu_common: Rename MXC_CCM_BASE
Fabio Estevam [Thu, 31 May 2012 07:23:59 +0000 (07:23 +0000)]
ipu_common: Rename MXC_CCM_BASE

Rename MXC_CCM_BASE to CCM_BASE_ADDR as this is already defined for MX6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agoipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53
Fabio Estevam [Thu, 31 May 2012 07:23:58 +0000 (07:23 +0000)]
ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53

The registers accessed inside clk_ipu_enable/disable are not present on MX6,
so make sure they only run on MX51 and MX53.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agoipu_common: Only apply the erratum to MX51
Fabio Estevam [Thu, 31 May 2012 07:23:57 +0000 (07:23 +0000)]
ipu_common: Only apply the erratum to MX51

The following erratum :

"ENGcm08316
IPU: Clarification regarding the bypass mode registers setup for
display and camera interfaces"

only applies to mx51, so restrict its usage for this SoC only.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agovideo: Rename CONFIG_VIDEO_MX5
Fabio Estevam [Thu, 31 May 2012 07:23:56 +0000 (07:23 +0000)]
video: Rename CONFIG_VIDEO_MX5

Rename CONFIG_VIDEO_MX5 as this driver can also be used on mx6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agomx6: Allow mx6 to access the IPUv3 registers
Fabio Estevam [Thu, 31 May 2012 07:23:55 +0000 (07:23 +0000)]
mx6: Allow mx6 to access the IPUv3 registers

Adjust the IPUv3 registers, so that the IPUv3 driver can be extended for mx6 as well.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agocommon lcd: minor coding style changes
Nikita Kiryanov [Thu, 24 May 2012 01:42:38 +0000 (01:42 +0000)]
common lcd: minor coding style changes

No functional changes

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agoPrepare v2012.07-rc1 v2012.07-rc1
Wolfgang Denk [Tue, 10 Jul 2012 07:21:12 +0000 (09:21 +0200)]
Prepare v2012.07-rc1

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoMinor Coding Style cleanup
Wolfgang Denk [Tue, 10 Jul 2012 07:18:33 +0000 (09:18 +0200)]
Minor Coding Style cleanup

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Tue, 10 Jul 2012 06:54:41 +0000 (08:54 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  tegra: define fdt_load/fdt_high variables
  tegra: enable bootz command
  tegra: usb: Fix device enumeration problem of USB1
  tegra: trimslice: set up serial flash pinmux
  tegra: add pin_mux_spi() board initialization function
  tegra: add GMC/GMD funcmux entry for SFLASH
  tegra: bootcmd: start USB only when needed
  tegra: bootcmd enhancements
  tegra: add enterrcm command
  tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
  Add env vars describing U-Boot target board
  tegra: usb: fix wrong error check
  tegra: add ULPI on USB2 funcmux entry
  tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
  tegra: Add Tamonten Evaluation Carrier support
  tegra: Use SD write-protect GPIO on Tamonten
  tegra: Implement gpio_early_init() on Tamonten
  tegra: Allow boards to perform early GPIO setup
  tegra: plutux: Add device tree support
  tegra: medcom: Add device tree support
  tegra: Rework Tamonten support
  beagle: add eeprom expansion board info for bct brettl4

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoEXYNOS: Fix USB compiler warning
Rajeshwari Shinde [Mon, 9 Jul 2012 19:34:34 +0000 (19:34 +0000)]
EXYNOS: Fix USB compiler warning

Fixed the compiler warning message.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Marek Vasut <marex@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-usb
Wolfgang Denk [Mon, 9 Jul 2012 21:59:00 +0000 (23:59 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-usb

* 'master' of git://git.denx.de/u-boot-usb:
  CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250
  EXYNOS5: USB: Fix incorrect USB base addresses
  EXYNOS: Add power Enable/Disable for USB-EHCI
  USB: EXYNOS: Set USB 2.0 HOST Link mode
  EXYNOS5: Add structure for PMU registers
  EXYNOS5: Fix system register structure
  USB: EXYNOS: Incorporate EHCI review comments

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agotegra: define fdt_load/fdt_high variables
Stephen Warren [Wed, 13 Jun 2012 09:55:12 +0000 (09:55 +0000)]
tegra: define fdt_load/fdt_high variables

These variables act like loadaddr, but for a device tree image. Defining
them in the environment allows boot scripts to be identical on Tegra20 and
Tegra30, which have different memory base addresses, and hence need
different values for these variables.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: enable bootz command
Stephen Warren [Wed, 13 Jun 2012 09:55:11 +0000 (09:55 +0000)]
tegra: enable bootz command

bootz is just like bootm, except that it can boot a raw zImage, without
requiring it to be wrapped inside a uImage.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: usb: Fix device enumeration problem of USB1
Jim Lin [Sun, 24 Jun 2012 20:40:57 +0000 (20:40 +0000)]
tegra: usb: Fix device enumeration problem of USB1

A known hardware issue of USB1 port where bit 1 (connect status
change) of PORTSC register will be set after issuing Port Reset
(like "usb reset" in u-boot command line).
This will be treated as an error and stops later device enumeration.

Therefore we clear that bit after Port Reset in order to proceed
later device enumeration.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: trimslice: set up serial flash pinmux
Stephen Warren [Tue, 12 Jun 2012 08:33:41 +0000 (08:33 +0000)]
tegra: trimslice: set up serial flash pinmux

When Trimslice is booted from serial flash, the boot ROM does this, so
U-Boot doesn't need to. However, booting from the SD slot for recovery
purposes, the boot ROM does not set up the pinmux for serial flash. Add
code to U-Boot to set this up, so that an SD-based recovery U-Boot image
can upgrade the U-Boot in serial flash.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: add pin_mux_spi() board initialization function
Stephen Warren [Tue, 12 Jun 2012 08:33:40 +0000 (08:33 +0000)]
tegra: add pin_mux_spi() board initialization function

Boards can override this to set up the pinmux correctly to access serial
flash.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: add GMC/GMD funcmux entry for SFLASH
Stephen Warren [Tue, 12 Jun 2012 08:33:39 +0000 (08:33 +0000)]
tegra: add GMC/GMD funcmux entry for SFLASH

This is used on TrimSlice.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: bootcmd: start USB only when needed
Stephen Warren [Mon, 4 Jun 2012 10:59:23 +0000 (10:59 +0000)]
tegra: bootcmd: start USB only when needed

Instead of initializing USB as soon as bootcmd is executed, defer it
until the first boot device that (potentially in the case of network)
uses USB is scanned. This avoids initializing USB when booting from MMC,
so speeds that up.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: bootcmd enhancements
Stephen Warren [Mon, 4 Jun 2012 10:59:22 +0000 (10:59 +0000)]
tegra: bootcmd enhancements

Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.

The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.

Also, reformat BOOTCMDS_COMMON to fit within 80 columns.

Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
  based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
  into the boot_targets variable.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: add enterrcm command
Stephen Warren [Mon, 4 Jun 2012 09:23:55 +0000 (09:23 +0000)]
tegra: add enterrcm command

Tegra's boot ROM supports a mode whereby code may be downloaded and flash
programmed over a USB connection. On dev boards, this is typically entered
by holding down a "force recovery" button and resetting the CPU. However,
not all boards have such a button (one example is the Compulab Trimslice),
so a method to enter RCM from software is useful.

This change implements the command "enterrcm" to do this, and enables it
for all Tegra boards by default. Even on boards other than Trimslice,
controlling this over a UART may be useful, e.g. to allow simple remote
control without the need for mechanical button actuators, or hooking up
relays/... to the button.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
Stephen Warren [Tue, 22 May 2012 09:21:55 +0000 (09:21 +0000)]
tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG

So that all Tegra boards define environment variables that describe
themselves.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agoAdd env vars describing U-Boot target board
Stephen Warren [Tue, 22 May 2012 09:21:54 +0000 (09:21 +0000)]
Add env vars describing U-Boot target board

This can be useful for generic scripts. For example, rather than hard-
coding a script to ext2load tegra-harmony.dtb, it could load
${soc}-${board}.dtb and hence not need adjustments to run on multiple
boards.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: usb: fix wrong error check
Lucas Stach [Thu, 31 May 2012 01:51:02 +0000 (01:51 +0000)]
tegra: usb: fix wrong error check

loop_count runs down from 10000, so the correct condition to error out
is ==0.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Tom Warren <twarren.nvidia@gmail.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: add ULPI on USB2 funcmux entry
Lucas Stach [Thu, 31 May 2012 01:51:01 +0000 (01:51 +0000)]
tegra: add ULPI on USB2 funcmux entry

This is needed as a prerequisite for Tegra USB ULPI support
within U-Boot.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Tom Warren <twarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
Tom Warren [Fri, 1 Jun 2012 08:22:14 +0000 (08:22 +0000)]
tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches

Missed some boards after my tegra2_mmc.* -> tegra_mmc.* change, and
one instance of CONFIG_TEGRA2_SPI. MAKEALL -s tegra2 AOK, Seaboard MMC
AOK. Didn't test Tamonten, Paz00 or TrimSlice, as I have none here.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
12 years agotegra: Add Tamonten Evaluation Carrier support
Thierry Reding [Mon, 4 Jun 2012 20:02:30 +0000 (20:02 +0000)]
tegra: Add Tamonten Evaluation Carrier support

The Tamonten Evaluation Carrier is an evaluation board for the Tamonten
processor board. More information is available here:

http://www.avionic-design.de/en/products/nvidia-tegra-tamonten-system-en/nvidia-tegra-tamonten-evboard-en.html

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Use SD write-protect GPIO on Tamonten
Thierry Reding [Mon, 4 Jun 2012 20:02:29 +0000 (20:02 +0000)]
tegra: Use SD write-protect GPIO on Tamonten

GPIO PI6 can be used to obtain the write-protect status of an SD card
inserted into the SD slot.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Implement gpio_early_init() on Tamonten
Thierry Reding [Mon, 4 Jun 2012 20:02:28 +0000 (20:02 +0000)]
tegra: Implement gpio_early_init() on Tamonten

The PI4 GPIO is used on Tamonten to reset carrier board peripherals.
Power sequencing hardware on the carrier pulls the reset low before
powering up the Tegra, and the CPU is supposed to signal readiness,
and therefore bring peripherals out of reset by pulling PI4 high.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Allow boards to perform early GPIO setup
Thierry Reding [Mon, 4 Jun 2012 20:02:27 +0000 (20:02 +0000)]
tegra: Allow boards to perform early GPIO setup

The new gpio_early_init() function, which does nothing by default, can
be overridden by boards to configure GPIOs at an early stage.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: plutux: Add device tree support
Thierry Reding [Mon, 4 Jun 2012 20:02:26 +0000 (20:02 +0000)]
tegra: plutux: Add device tree support

Device tree support is required for working USB host support, which in
turn enables ethernet support.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: medcom: Add device tree support
Thierry Reding [Mon, 4 Jun 2012 20:02:25 +0000 (20:02 +0000)]
tegra: medcom: Add device tree support

Device tree support is required for working USB host support, which in
turn enables ethernet support.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Rework Tamonten support
Thierry Reding [Mon, 4 Jun 2012 20:02:24 +0000 (20:02 +0000)]
tegra: Rework Tamonten support

This commit uses the common Tegra board implementation instead of
duplicating a lot of the code. In addition, the Plutux and Medcom
specific board files can be removed as the MMC/SD setup is common
among all Tamonten-based boards.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agobeagle: add eeprom expansion board info for bct brettl4
Peter Meerwald [Thu, 28 Jun 2012 05:38:35 +0000 (05:38 +0000)]
beagle: add eeprom expansion board info for bct brettl4

this is for a prototyping board

vendor/product ids have been added to
http://elinux.org/BeagleBoardPinMux#List_of_Vendor_and_Device_IDs

Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
12 years agoCONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250
Rajeshwari Shinde [Mon, 14 May 2012 05:52:05 +0000 (05:52 +0000)]
CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
12 years agoEXYNOS5: USB: Fix incorrect USB base addresses
Rajeshwari Shinde [Mon, 14 May 2012 05:52:04 +0000 (05:52 +0000)]
EXYNOS5: USB: Fix incorrect USB base addresses

This patch corrects the base addresses for USB_PHY and USB_OTG.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
12 years agoEXYNOS: Add power Enable/Disable for USB-EHCI
Rajeshwari Shinde [Mon, 14 May 2012 05:52:03 +0000 (05:52 +0000)]
EXYNOS: Add power Enable/Disable for USB-EHCI

This patch adds functions to enable/disable the power of USB
host controller for EXYNOS5.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
12 years agoUSB: EXYNOS: Set USB 2.0 HOST Link mode
Rajeshwari Shinde [Mon, 14 May 2012 05:52:02 +0000 (05:52 +0000)]
USB: EXYNOS: Set USB 2.0 HOST Link mode

This patch adds a function to set usb host mode to USB 2.0 HOST Link
for EXYNOS5

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
12 years agoEXYNOS5: Add structure for PMU registers
Rajeshwari Shinde [Mon, 14 May 2012 05:52:01 +0000 (05:52 +0000)]
EXYNOS5: Add structure for PMU registers

This patch adds power mananagement registers structure for exynos5 SoC.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
12 years agoEXYNOS5: Fix system register structure
Rajeshwari Shinde [Mon, 14 May 2012 05:52:00 +0000 (05:52 +0000)]
EXYNOS5: Fix system register structure

This patch corrects the SYSREG structure.
We have removed the sysreg.h added in the previous patchset
version as the sysreg structure is already defined in system.h.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
12 years agoUSB: EXYNOS: Incorporate EHCI review comments
Rajeshwari Shinde [Mon, 21 May 2012 11:08:03 +0000 (16:38 +0530)]
USB: EXYNOS: Incorporate EHCI review comments

This patch incorates the review comments given by Minkyu Kang for
EHCI support on EXYNOS

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
12 years agoRevert "arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0"
Wolfgang Denk [Mon, 9 Jul 2012 07:19:00 +0000 (09:19 +0200)]
Revert "arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0"

This reverts commit fa042186b932e9b9ee9a2fd8a04a3acf7c70d224.
It causes build warnings like this:
cpu.c:48:1: warning: -fstack-usage not supported for this target
[enabled by default]

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agofdt: send all dtc output to stderr
Stephen Warren [Fri, 8 Jun 2012 12:28:17 +0000 (12:28 +0000)]
fdt: send all dtc output to stderr

Commit 896bbb5 "fdt: avoid bad MAKEALL status" added logic to capture
the result code from dtc by echoing $? to stdout and capturing it using
$(). However, dtc emits some diagnostics to stderr and some to stdout.
The diagnostics send to stdout ended up getting captured via $() rather
than being echo'd to the user. This caused those diagnostics to be passed
to the exit command, which would then fail with the following cryptic
error message:

    /bin/sh: line 1: exit: too many arguments

Solve this by redirecting all dtc output to stderr so that $() does not
capture it. This allows the user to see the actual error message from dtc.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: albert.u.boot@aribaud.net
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
12 years agoext2fs: fix warning: 'blocknxt' may be used uninitialized
Kim Phillips [Tue, 3 Jul 2012 22:41:56 +0000 (17:41 -0500)]
ext2fs: fix warning: 'blocknxt' may be used uninitialized

This warning was introduced in 436da3c "ext2load: increase read
speed":

ext2fs.c: In function 'ext2fs_read_file':
ext2fs.c:458:19: warning: 'blocknxt' may be used uninitialized in this function [-Wuninitialized]

this change makes it go away.

Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Jason Cooper <u-boot@lakedaemon.net>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years agotools: Fix mingw tools build
Vladimir Yakovlev [Sat, 7 Jul 2012 10:05:06 +0000 (10:05 +0000)]
tools: Fix mingw tools build

mkenvimage does not build due to missed os_support.o and unsupported
file modes S_IRGRP S_IWGRP.
Tested with mingw 4.2.1 on ubuntu 12.04.

Signed-off-by: Vladimir Yakovlev <nagos@inbox.ru>
12 years agonet: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY
Kim Phillips [Thu, 5 Jul 2012 13:19:32 +0000 (13:19 +0000)]
net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY

commit "net: use common rand()/srand() functions" introduced the following
build warning on the current u-boot-arm tree:

$ ./MAKEALL MPC8313ERDB_66
Configuring for MPC8313ERDB_66 - Board: MPC8313ERDB, Options: SYS_66MHZ
   text    data     bss     dec     hex filename
 271988   13976   41768  327732   50034 ./u-boot
In file included from bootp.c:15:0:
net_rand.h: In function 'srand_mac':
net_rand.h:40:2: warning: implicit declaration of function 'srand' [-Wimplicit-function-declaration]

adding this dependency fixes it.

Cc: Michael Walle <michael@walle.cc>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Michael Walle <michael@walle.cc>
12 years agoRemove remaining mdelay() macros
Anatolij Gustschin [Tue, 24 Apr 2012 22:43:23 +0000 (22:43 +0000)]
Remove remaining mdelay() macros

Drop mdelay() macros since we already have a common mdelay() func.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>