From: deniss-s <deniss.samcuks@gmail.com>
Date: Thu, 28 Jun 2018 10:41:01 +0000 (+0300)
Subject: add flashning instructions for TL-WR841N
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=refs%2Fpull%2F68%2Fhead;p=librecmc%2Flibrecmc.git

add flashning instructions for TL-WR841N
---

diff --git a/docs/TL_WR841ND.md b/docs/TL_WR841ND.md
index feac3fc517..c78475ca95 100644
--- a/docs/TL_WR841ND.md
+++ b/docs/TL_WR841ND.md
@@ -1,4 +1,6 @@
-# TP-WR841ND
+# TP-WR841N[D]
+
+TP-WR841N and TP-WR841ND is one and the same model, except TP-WR841ND has detachable antennas.
 
 ## Specs
 
@@ -20,6 +22,20 @@ DO NOT BUY v13!!! V13 contains a mediatek
 chipset, which requires a non-free firmware
 blob.
 
-## Reset instructions
+## Flashing from Web GUI
+
+Flashing instructions listed below were tested with TP-WR841N ver 8, with original firmware version 3.13.33.
+
+1. Reset to factory default state (don't really know if it's required, but definitely won't do any harm).
+2. Go to 192.168.0.1 and login with default credentials (admin/admin)
+3. Navigate to _System Tools -> Firmware Upgrade_ and provide factory bin file. Press Upgrade to perform flash.
+4. After router is flashed and restarted make sure to stop NetworkManager service (might not be required, but I couldn't access libreCMC web interface without stopping it).
+5. Go to 192.168.10.1 and login with default credentials (root/root).
+6. Navigate to _System-> Backup/Flash Firmware_ and in "Flash new firmware image" section provide sysupgrade bin file. Press Flash image to perform flash.
+7. After successfull flash NetworkManager can be started again.
+
+## Hard reset instructions
 
-???
+1. Press and hold RESET button for several seconds.
+2. Release the button when SYS (gear) led starts blinking.
+3. Wait for router to boot.