From: Stefan Roese Date: Fri, 12 Feb 2016 12:48:02 +0000 (+0100) Subject: fpga: altera: Add StratixV support X-Git-Tag: v2016.05-rc1~179^2~6 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ff9c4c535a8b722c54d45e77aa083fa08552341d;p=oweals%2Fu-boot.git fpga: altera: Add StratixV support This patch adds support for programming of the StratixV FPGAs. Programming is done in this case (board theadorable) via SPI. The board may provide board specific code for bitstream programming. This StratixV support will be used by the theadorable board. Signed-off-by: Stefan Roese Cc: Tom Rini Signed-off-by: Stefan Roese --- diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 6aa24d4359..fec3fecbdf 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -17,5 +17,6 @@ obj-y += altera.o obj-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o +obj-$(CONFIG_FPGA_STRATIX_V) += stratixv.o obj-$(CONFIG_FPGA_SOCFPGA) += socfpga.o endif diff --git a/drivers/fpga/altera.c b/drivers/fpga/altera.c index a5bfe5dce1..135a3572a8 100644 --- a/drivers/fpga/altera.c +++ b/drivers/fpga/altera.c @@ -37,6 +37,9 @@ static const struct altera_fpga { { Altera_StratixII, "StratixII", StratixII_load, StratixII_dump, StratixII_info }, #endif +#if defined(CONFIG_FPGA_STRATIX_V) + { Altera_StratixV, "StratixV", stratixv_load, NULL, NULL }, +#endif #if defined(CONFIG_FPGA_SOCFPGA) { Altera_SoCFPGA, "SoC FPGA", socfpga_load, NULL, NULL }, #endif diff --git a/drivers/fpga/stratixv.c b/drivers/fpga/stratixv.c new file mode 100644 index 0000000000..cc035eb2a1 --- /dev/null +++ b/drivers/fpga/stratixv.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2016 Stefan Roese + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/* Write the RBF data to FPGA via SPI */ +static int program_write(int spi_bus, int spi_dev, const void *rbf_data, + unsigned long rbf_size) +{ + struct spi_slave *slave; + int ret; + + debug("%s (%d): data=%p size=%ld\n", + __func__, __LINE__, rbf_data, rbf_size); + + /* FIXME: How to get the max. SPI clock and SPI mode? */ + slave = spi_setup_slave(spi_bus, spi_dev, 27777777, SPI_MODE_3); + if (!slave) + return -1; + + if (spi_claim_bus(slave)) + return -1; + + ret = spi_xfer(slave, rbf_size * 8, rbf_data, (void *)rbf_data, + SPI_XFER_BEGIN | SPI_XFER_END); + + spi_release_bus(slave); + + return ret; +} + +/* + * This is the interface used by FPGA driver. + * Return 0 for sucess, non-zero for error. + */ +int stratixv_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size) +{ + altera_board_specific_func *pfns = desc->iface_fns; + int cookie = desc->cookie; + int spi_bus; + int spi_dev; + int ret = 0; + + if ((u32)rbf_data & 0x3) { + puts("FPGA: Unaligned data, realign to 32bit boundary.\n"); + return -EINVAL; + } + + /* Run the pre configuration function if there is one */ + if (pfns->pre) + (pfns->pre)(cookie); + + /* Establish the initial state */ + if (pfns->config) { + /* De-assert nCONFIG */ + (pfns->config)(false, true, cookie); + + /* nConfig minimum low pulse width is 2us */ + udelay(200); + + /* Assert nCONFIG */ + (pfns->config)(true, true, cookie); + + /* nCONFIG high to first rising clock on DCLK min 1506 us */ + udelay(1600); + } + + /* Write the RBF data to FPGA */ + if (pfns->write) { + /* + * Use board specific data function to write bitstream + * into the FPGA + */ + ret = (pfns->write)(rbf_data, rbf_size, true, cookie); + } else { + /* + * Use common SPI functions to write bitstream into the + * FPGA + */ + spi_bus = COOKIE2SPI_BUS(cookie); + spi_dev = COOKIE2SPI_DEV(cookie); + ret = program_write(spi_bus, spi_dev, rbf_data, rbf_size); + } + if (ret) + return ret; + + /* Check done pin */ + if (pfns->done) { + ret = (pfns->done)(cookie); + + if (ret) + printf("Error: DONE not set (ret=%d)!\n", ret); + } + + return ret; +} diff --git a/include/altera.h b/include/altera.h index c2991ad800..48d3eb73c9 100644 --- a/include/altera.h +++ b/include/altera.h @@ -10,6 +10,19 @@ #ifndef _ALTERA_H_ #define _ALTERA_H_ +/* + * For the StratixV FPGA programming via SPI, the following + * information is coded in the 32bit cookie: + * Bit 31 ... Bit 0 + * SPI-Bus | SPI-Dev | Config-Pin | Done-Pin + */ +#define FPGA_COOKIE(bus, dev, config, done) \ + (((bus) << 24) | ((dev) << 16) | ((config) << 8) | (done)) +#define COOKIE2SPI_BUS(c) (((c) >> 24) & 0xff) +#define COOKIE2SPI_DEV(c) (((c) >> 16) & 0xff) +#define COOKIE2CONFIG(c) (((c) >> 8) & 0xff) +#define COOKIE2DONE(c) ((c) & 0xff) + enum altera_iface { /* insert all new types after this */ min_altera_iface_type, @@ -40,6 +53,8 @@ enum altera_family { Altera_CYC2, /* StratixII Family */ Altera_StratixII, + /* StratixV Family */ + Altera_StratixV, /* SoCFPGA Family */ Altera_SoCFPGA, @@ -89,6 +104,7 @@ typedef struct { Altera_done_fn done; Altera_clk_fn clk; Altera_data_fn data; + Altera_write_fn write; Altera_abort_fn abort; Altera_post_fn post; } altera_board_specific_func; @@ -97,4 +113,8 @@ typedef struct { int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size); #endif +#ifdef CONFIG_FPGA_STRATIX_V +int stratixv_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size); +#endif + #endif /* _ALTERA_H_ */