From: Ilya Yanok <yanok@emcraft.com>
Date: Mon, 28 Nov 2011 06:37:38 +0000 (+0000)
Subject: omap_gpmc: use SOFTECC in SPL if it's enabled
X-Git-Tag: v2011.12-rc1~60^2~49
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ff62fb4c6a01866310b0b5f43ea097e9e5220a27;p=oweals%2Fu-boot.git

omap_gpmc: use SOFTECC in SPL if it's enabled

Use software ECC for the SPL build if support for software ECC in SPL is
enabled.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Scott Wood <scottwood@freescale.com>
---

diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 5bbec48be2..1dfe074e1e 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -348,7 +348,7 @@ int board_nand_init(struct nand_chip *nand)
 
 	nand->chip_delay = 100;
 	/* Default ECC mode */
-#ifndef CONFIG_SPL_BUILD
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC)
 	nand->ecc.mode = NAND_ECC_SOFT;
 #else
 	nand->ecc.mode = NAND_ECC_HW;
@@ -359,7 +359,9 @@ int board_nand_init(struct nand_chip *nand)
 	nand->ecc.correct = omap_correct_data;
 	nand->ecc.calculate = omap_calculate_ecc;
 	omap_hwecc_init(nand);
+#endif
 
+#ifdef CONFIG_SPL_BUILD
 	if (nand->options & NAND_BUSWIDTH_16)
 		nand->read_buf = nand_read_buf16;
 	else