From: Masahiro Yamada Date: Fri, 29 May 2015 08:30:10 +0000 (+0900) Subject: ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4 X-Git-Tag: v2015.07-rc2~49^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=fcb2525d373f7a5bab213e8a89681bd3b7d09c44;p=oweals%2Fu-boot.git ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4 The chip select 1 of the NAND controller is available if you want to use, although the pins are shared with UART port 2. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c index 72cd34678d..2a5a296f88 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c @@ -27,6 +27,8 @@ void pin_init(void) sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ + /* sg_set_pinsel(131, 1); */ /* RXD2 -> NRYBY1 */ + /* sg_set_pinsel(132, 1); */ /* TXD2 -> XNFCE1 */ #endif #ifdef CONFIG_USB_XHCI_UNIPHIER